summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/mellanox
AgeCommit message (Collapse)Author
2015-09-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) When we run a tap on netlink sockets, we have to copy mmap'd SKBs instead of cloning them. From Daniel Borkmann. 2) When converting classical BPF into eBPF, fix the setting of the source reg to BPF_REG_X. From Tycho Andersen. 3) Fix igmpv3/mldv2 report parsing in the bridge multicast code, from Linus Lussing. 4) Fix dst refcounting for ipv6 tunnels, from Martin KaFai Lau. 5) Set NLM_F_REPLACE flag properly when replacing ipv6 routes, from Roopa Prabhu. 6) Add some new cxgb4 PCI device IDs, from Hariprasad Shenai. 7) Fix headroom tests and SKB leaks in ipv6 fragmentation code, from Florian Westphal. 8) Check DMA mapping errors in bna driver, from Ivan Vecera. 9) Several 8139cp bug fixes (dev_kfree_skb_any in interrupt context, misclearing of interrupt status in TX timeout handler, etc.) from David Woodhouse. 10) In tipc, reset SKB header pointer after skb_linearize(), from Erik Hugne. 11) Fix autobind races et al. in netlink code, from Herbert Xu with help from Tejun Heo and others. 12) Missing SET_NETDEV_DEV in sunvnet driver, from Sowmini Varadhan. 13) Fix various races in timewait timer and reqsk_queue_hadh_req, from Eric Dumazet. 14) Fix array overruns in mac80211, from Johannes Berg and Dan Carpenter. 15) Fix data race in rhashtable_rehash_one(), from Dmitriy Vyukov. 16) Fix race between poll_one_napi and napi_disable, from Neil Horman. 17) Fix byte order in geneve tunnel port config, from John W Linville. 18) Fix handling of ARP replies over lightweight tunnels, from Jiri Benc. 19) We can loop when fib rule dumps cross multiple SKBs, fix from Wilson Kok and Roopa Prabhu. 20) Several reference count handling bug fixes in the PHY/MDIO layer from Russel King. 21) Fix lockdep splat in ppp_dev_uninit(), from Guillaume Nault. 22) Fix crash in icmp_route_lookup(), from David Ahern. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits) net: Fix panic in icmp_route_lookup net: update docbook comment for __mdiobus_register() ppp: fix lockdep splat in ppp_dev_uninit() net: via/Kconfig: GENERIC_PCI_IOMAP required if PCI not selected phy: marvell: add link partner advertised modes net: fix net_device refcounting phy: add phy_device_remove() phy: fixed-phy: properly validate phy in fixed_phy_update_state() net: fix phy refcounting in a bunch of drivers of_mdio: fix MDIO phy device refcounting phy: add proper phy struct device refcounting phy: fix mdiobus module safety net: dsa: fix of_mdio_find_bus() device refcount leak phy: fix of_mdio_find_bus() device refcount leak ip6_tunnel: Reduce log level in ip6_tnl_err() to debug ip6_gre: Reduce log level in ip6gre_err() to debug fib_rules: fix fib rule dumps across multiple skbs bnx2x: byte swap rss_key to comply to Toeplitz specs net: revert "net_sched: move tp->root allocation into fw_init()" lwtunnel: remove source and destination UDP port config option ...
2015-09-17net/mlx4_en: really allow to change RSS keyEric Dumazet
When changing rss key, we do not want to overwrite user provided key by the one provided by netdev_rss_key_fill(), which is the host random key generated at boot time. Fixes: 947cbb0ac242 ("net/mlx4_en: Support for configurable RSS hash function") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Eyal Perry <eyalpe@mellanox.com> CC: Amir Vadai <amirv@mellanox.com> Acked-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-15net/mlx4_en: Use access helper irq_data_get_affinity_mask()Thomas Gleixner
This is a preparatory patch for moving irq_data struct members. Search and replace was done with coccinelle Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Amir Vadai <amirv@mellanox.com>
2015-09-09Merge tag 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull inifiniband/rdma updates from Doug Ledford: "This is a fairly sizeable set of changes. I've put them through a decent amount of testing prior to sending the pull request due to that. There are still a few fixups that I know are coming, but I wanted to go ahead and get the big, sizable chunk into your hands sooner rather than waiting for those last few fixups. Of note is the fact that this creates what is intended to be a temporary area in the drivers/staging tree specifically for some cleanups and additions that are coming for the RDMA stack. We deprecated two drivers (ipath and amso1100) and are waiting to hear back if we can deprecate another one (ehca). We also put Intel's new hfi1 driver into this area because it needs to be refactored and a transfer library created out of the factored out code, and then it and the qib driver and the soft-roce driver should all be modified to use that library. I expect drivers/staging/rdma to be around for three or four kernel releases and then to go away as all of the work is completed and final deletions of deprecated drivers are done. Summary of changes for 4.3: - Create drivers/staging/rdma - Move amso1100 driver to staging/rdma and schedule for deletion - Move ipath driver to staging/rdma and schedule for deletion - Add hfi1 driver to staging/rdma and set TODO for move to regular tree - Initial support for namespaces to be used on RDMA devices - Add RoCE GID table handling to the RDMA core caching code - Infrastructure to support handling of devices with differing read and write scatter gather capabilities - Various iSER updates - Kill off unsafe usage of global mr registrations - Update SRP driver - Misc mlx4 driver updates - Support for the mr_alloc verb - Support for a netlink interface between kernel and user space cache daemon to speed path record queries and route resolution - Ininitial support for safe hot removal of verbs devices" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (136 commits) IB/ipoib: Suppress warning for send only join failures IB/ipoib: Clean up send-only multicast joins IB/srp: Fix possible protection fault IB/core: Move SM class defines from ib_mad.h to ib_smi.h IB/core: Remove unnecessary defines from ib_mad.h IB/hfi1: Add PSM2 user space header to header_install IB/hfi1: Add CSRs for CONFIG_SDMA_VERBOSITY mlx5: Fix incorrect wc pkey_index assignment for GSI messages IB/mlx5: avoid destroying a NULL mr in reg_user_mr error flow IB/uverbs: reject invalid or unknown opcodes IB/cxgb4: Fix if statement in pick_local_ip6adddrs IB/sa: Fix rdma netlink message flags IB/ucma: HW Device hot-removal support IB/mlx4_ib: Disassociate support IB/uverbs: Enable device removal when there are active user space applications IB/uverbs: Explicitly pass ib_dev to uverbs commands IB/uverbs: Fix race between ib_uverbs_open and remove_one IB/uverbs: Fix reference counting usage of event files IB/core: Make ib_dealloc_pd return void IB/srp: Create an insecure all physical rkey only if needed ...
2015-08-30net/mlx4: Postpone the registration of net_deviceMoni Shoua
The mlx4 network driver was registered in the context of the 'add' function of the core driver (called when HW should be registered). This makes the netdev event NETDEV_REGISTER to be sent in a context where the answer to get_protocol_dev() callback returns NULL. This may be confusing to listeners of netdev events. This patch is a preparation to the patch that implements the get_netdev() callback in the IB/mlx4 driver. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-28mlx5: Fix missing device local_dma_lkeySagi Grimberg
The mlx5 driver exposes device capability IB_DEVICE_LOCAL_DMA_LKEY but does not set the the device local_dma_lkey. This breaks rpcrdma drivers. Query and set this lkey when creating the device resources. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-27net/mlx4_core: Fix unintialized variable used in error pathCarol L Soto
The uninitialized value name in mlx4_en_activate_cq was used in order to print an error message. Fixing it by replacing it with cq->vector. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Carol L Soto <clsoto@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27net/mlx4_core: Capping number of requested MSIXs to MAX_MSIXCarol L Soto
We currently manage IRQs in pool_bm which is a bit field of MAX_MSIX bits. Thus, allocating more than MAX_MSIX interrupts can't be managed in pool_bm. Fixing this by capping number of requested MSIXs to MAX_MSIX. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Carol L Soto <clsoto@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27mlxsw: Make mailboxes 4KB alignedIdo Schimmel
The HW-SW contract requires mailboxes passed to the firmware to be 4KB aligned. Previously, these mailboxes were mapped using streaming DMA routines, which do not guarantee the bus addresses to be 4KB aligned. Under certain conditions this constraint was indeed violated and errors were observed. By using consistent DMA mapping routines together with a mailbox size of 4KB we are guaranteed not to violate the constraint. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27mlxsw: adjust transmit fail log message level in __mlxsw_emad_transmitJiri Pirko
When transmit fails, it is an error, not a warning. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27mlxsw: Remove duplicate included headerIdo Schimmel
Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25net/mlx5e: Avoid accessing NULL pointer at ndo_select_queueRana Shahout
To avoid multiply/division operations on the data path, we hold a {channel, tc}==>txq mapping table. We held this mapping table inside the channel object that is being destroyed upon some configuration operations (e.g MTU change). So in case ndo_select_queue occurs during such a configuration operation, it may access a NULL channel pointer, resulting in kernel panic. To fix this issue we moved the {channel, tc}==>txq mapping table outside the channel object so that it will be available also during such configuration operations. Signed-off-by: Rana Shahout <ranas@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25mlxsw: fix error return codeJulia Lawall
Return a negative error code on failure. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier ret; expression e1,e2; @@ ( if (\(ret < 0\|ret != 0\)) { ... return ret; } | ret = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17mlx5e: Fix sparse warnings in mlx5e_handle_csum().David S. Miller
>> drivers/net/ethernet/mellanox/mlx5/core/en_rx.c:173:44: sparse: incorrect type in argument 1 (different base types) drivers/net/ethernet/mellanox/mlx5/core/en_rx.c:173:44: expected restricted __sum16 [usertype] n drivers/net/ethernet/mellanox/mlx5/core/en_rx.c:173:44: got restricted __be16 [usertype] check_sum Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17net/mlx5e: Support RX CHECKSUM_COMPLETEAchiad Shochat
Only for packets with first ethertype set to IPv4/6 for now. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17net/mlx5e: Support ethtool get/set_pauseparamAchiad Shochat
Only rx/tx pause settings. Autoneg setting is currently not supported. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17net/mlx5e: Ethtool link speed setting fixesAchiad Shochat
- Port speed settings are applied by the device only upon port admin status transition from DOWN to UP. So we enforce this transition regardless of the port's current operation state (which may be occasionally DOWN if for example the network cable is disconnected). - Fix the PORT_UP/DOWN device interface enum - Set the local_port bit in the device PAOS register - EXPORT the PAOS (Port Administrative and Operational Status) register set/query access functions. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17net/mlx5e: HW LRO changes/fixesAchiad Shochat
- Change the maximum LRO session size from 16KB to 64KB - Reduce the LRO session timeout from 512us to 32us in order to reduce the TCP latency of non-LRO'ed flows. - Fix skb_shinfo(skb)->gso_size and set skb_shinfo(skb)->gso_type. - Fix a bug accessing un-initialized mdev pointer. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17net/mlx5e: Support smaller RX/TX ring sizesAchiad Shochat
We un-intentionally limited the minimum rings size too much. TX minimum ring size reduced from 128 to 64. RX minimum ring size reduced from 128 to 2. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17net/mlx5e: Add ethtool RSS configuration optionsAchiad Shochat
- get_rxfh_key_size - get_rxfh_indir_size - get/set_rxfh indirection table and RSS Toeplitz hash key - get_rxnfc Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17net/mlx5e: Make RSS indirection table size a constantAchiad Shochat
The indirection table size was defined by a variable that was actually assigned a constant value. Since we do not have any forseen intension to make it configurable we simply made it a constant. We also limit the number of channels such that the RSS indirection table could always populate all RX rings. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17net/mlx5e: Have a single RSS Toeplitz hash keyAchiad Shochat
No need to generate a unique key per TIR. Generating a single key per netdev and copying it to all its TIRs. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/cavium/Kconfig The cavium conflict was overlapping dependency changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-10mellanox: mlxsw: Use '%zx' to print size_t formatFabio Estevam
Use '%zx' to print size_t format in order to fix the following build warning: drivers/net/ethernet/mellanox/mlxsw/item.h:65:3: warning: format '%lx' expects argument of type 'long unsigned int', but argument 6 has type 'size_t' [-Wformat=] Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-09mlxsw: Fix use-after-free bug in mlxsw_sx_port_xmitIdo Schimmel
Store the length of the skb before transmitting it and use it for stats instead of skb->len, since skb might have been freed already. This issue was discovered using the Kernel Address sanitizer (KASan). Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-09mlxsw: Use correct skb length when dumping payloadIdo Schimmel
Do not use the length of the transmitted skb (which was freed), but that of the response skb. This issue was discovered using the Kernel Address sanitizer (KASan). Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-09mlxsw: Simplify mlxsw_sx_port_xmit functionIdo Schimmel
Previously we only checked if the transmission queue is not full in the middle of the xmit function. This lead to complex logic due to the fact that sometimes we need to reallocate the headroom for our Tx header. Allow the switch driver to know if the transmission queue is not full before sending the packet and remove this complex logic. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-09mlxsw: Strip FCS from incoming packetsJiri Pirko
FCS of incoming packets is already checked by HW. Just strip it out. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-09mlxsw: Make pci module dependent on HAS_DMA and HAS_IOMEMJiri Pirko
This resolves compile errors on um-allyesconfig. Note that there are many other drivers which have the same issue. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-09mlxsw: Make system port to local port mapping explicitIdo Schimmel
System ports are unique identifiers in a multi-ASIC environment that represent all the available ports in the system. Local ports on the other hand, are unique only within the local ASIC. Since system port to local port mapping is not part of the HW-SW contract and since only single-ASIC configurations are currently supported, set an explicit 1:1 mapping by configuring the Switch System Port Record (SSPR) register. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-09mlxsw: Call free_netdev when removing portIdo Schimmel
When removing a port's netdevice we should also free the memory allocated by alloc_etherdev(). Do this by calling free_netdev() at the end of the teardown sequence. Reported-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-07net/mlx5_core: Set log_uar_page_sz for non 4K page size architectureCarol L Soto
failed to configure the page size for architectures with page size different than 4K. Fixes: 938fe83 ("net/mlx5_core: New device capabilities handling") Signed-off-by: Carol L Soto <clsoto@linux.vnet.ibm.com> Acked-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-06net/mlx5_core: Support physical port countersGal Pressman
Added physical port counters in the following standard formats to ethtool statistics: - IEEE 802.3 - RFC2863 - RFC2819 Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-06net/mlx5e: Take advantage of the light-weight netdev open/stopAchiad Shochat
Now that TIRs, TISs and flow tables are kept alive while the netdev is stopped (after executing ndo_stop()) we can do the following improvements: - Obsolete the active_vlans SW shadow. - Do not delete/add flow table rules upon ndo_stop/open. In addition to simplifying the flow, this change also fastens the ndo_open/close operations. - Obsolete synchronization of threads accessing the flow tables with the netdev stop/open threads. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-06net/mlx5e: Disable async events before unregister_netdev()Achiad Shochat
It does not make sense to allow events while the netdev is unregistered. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-06net/mlx5e: Rename/move functions following the ndo_stop flow changeAchiad Shochat
Rename some functions that used to be invoked upon ndo_open/stop and are now invoked upon create/destroy_netdev() in order to better hint their place in the flow. Change some functions location in the file so that functions involved in ndo_open/stop flow will not be interleaved with other functions. This is a cosmetic change, no logical change here. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-06net/mlx5e: Light-weight netdev open/stopAchiad Shochat
Create/destroy TIRs, TISs and flow tables upon PCI probe/remove rather than upon the netdev ndo_open/stop. Upon ndo_stop(), redirect all RX traffic to the (lately introduced) "Drop RQ" and then close only the RX/TX rings, leaving the TIRs, TISs and flow tables alive. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-06net/mlx5_core: Introduce access function to modify RSS/LRO paramsAchiad Shochat
To be used by the mlx5 Eth driver in following commit. This is in preparation for netdev "light-weight" open/stop flow change described in previous commit. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-06net/mlx5e: Introduce the "Drop RQ"Achiad Shochat
RX traffic routed to this RQ will be silently dropped, at the NIC HW level. This is in preparation for netdev "light-weight" open/stop flow change described in previous commit. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-06net/mlx5e: Unify the RX flowAchiad Shochat
Generally an RX packet flows through the following objects: Flow table --> TIR --> RQT --> RQ Where: - TIR stands for "Transport Interface Receive", defining the RSS and LRO paramaters. - RQT stands for "RQ Table", implementing the RSS indirection table. - RQ stands for "Receive Queue" For flows that do not need LRO, nor RSS, the driver made a shortcut to the above RX flow by pointing to the RQ directly from the TIR, yielding this flow: Flow table --> TIR --> RQ In this commit we remove this shortcut by "inserting" a single-RQ RQT between the TIR and the RQ, i.e RX packets will reach the same RQ but will go through an RQT of size 1, pointing to just a single RQ. This way the RX traffic re-direction to/from the "Drop RQ" will be more uniform (AKA "one flow"), as it will involve only RQTs re-direction and no TIRs re-direction. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: arch/s390/net/bpf_jit_comp.c drivers/net/ethernet/ti/netcp_ethss.c net/bridge/br_multicast.c net/ipv4/ip_fragment.c All four conflicts were cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-30mlxsw: Introduce Mellanox SwitchX-2 ASIC supportJiri Pirko
Benefit from the previously introduced Mellanox Switch infrastructure and add driver for SwitchX-2 ASIC. Note that this driver is very simple now. It implements bare minimum for getting device to work on slow-path. Fast-path offload functionality is going to be added soon. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Elad Raz <eladr@mellanox.com> Reviewed-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-30mlxsw: Add interface to access registers and process eventsIdo Schimmel
Ethernet Management Datagrams (EMADs) are Ethernet packets sent between the host and the device in order to configure the available device registers. Another use case is notifications sent from the device to the host, letting it know about certain events, such as port up / down. Add the ability to construct EMADs with provisions to construct and parse the registers' payloads. Implement EMAD transaction layer which is responsible for the reliable transmission of EMADs. Also, add an infrastructure used by the switch driver to register for particular events generated by the device. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Elad Raz <eladr@mellanox.com> Reviewed-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-30mlxsw: Add PCI bus implementationJiri Pirko
Add PCI bus implementation for Mellanox Technologies Switch ASICs. This includes firmware initialization, async queues manipulation and command interface implementation. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Elad Raz <eladr@mellanox.com> Reviewed-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-30mlxsw: Introduce Mellanox switch driver coreJiri Pirko
Add core components of Mellanox switch driver infrastructure. Core infrastructure is designed so that it can be used by multiple bus drivers (PCI now, I2C and SGMII are planned to be implemented in the future). Multiple switch kind drivers can be registered as well. This core serves as a glue between buses and drivers. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Elad Raz <eladr@mellanox.com> Reviewed-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29net/mlx5e: Remove the mlx5e_update_priv_params() functionAchiad Shochat
It was used to update netdev priv parameters that require stopping and re-opening the device in a generic way - it got the new parameters and did: ndo_stop(), copy new parameters into current parameters, ndo_open(). We chose to remove it for two reasons: 1) It requires additional instance of struct mlx5e_params on the stack and looking forward we expect this struct to grow. 2) Sometimes we want to do additional operations (besides just updating the priv parameters) while the netdev is stopped. For example, updating netdev->mtu @mlx5e_change_mtu() should be done while the netdev is stopped (done in this commit). Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29net/mlx5e: Introduce create/destroy RSS indir table access functionsAchiad Shochat
Introduce access functions to create/destroy RSS indrection table and use it in the Ethernet driver. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29net/mlx5e: Do not use netdev_err() before the netdev is registeredAchiad Shochat
Since it is un-named at this time. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29net/mlx5e: Avoid redundant de-referenceAchiad Shochat
Use the already defined rq pointer directly. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29net/mlx5e: Remove redundant assignment of sq->user_indexAchiad Shochat
It is not needed by the mlx5 Eth driver since it has a CQ per RQ/SQ. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.46.0) at 2026-04-24 20:58:46 +0000