summaryrefslogtreecommitdiff
path: root/drivers/media/usb/dvb-usb-v2
AgeCommit message (Collapse)Author
2015-07-06[media] lmedm04: NEC scancode cleanupDavid Härdeman
This changes the keymap back to the state before commit 616a4b83 and changes the driver to use full NEC32 scancodes following the instructions provided by Malcolm Priestley <tvboxspy@gmail.com>. Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-24[media] lmedm04: fix the range for relative measurementsMauro Carvalho Chehab
Relative measurements are typically between 0 and 0xffff. However, for some tuners (TUNER_S7395 and TUNER_S0194), the range were from 0 to 0xff00, with means that 100% is never archived. Also, TUNER_RS2000 uses a more complex math. So, create a macro that does the conversion using bit operations and use it for all conversions. The code is also easier to read with is a bonus. While here, remove a bogus comment. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-24[media] lmedm04: use u32 instead of u64 for relative statsMauro Carvalho Chehab
Cleanup this sparse warning: drivers/media/usb/dvb-usb-v2/lmedm04.c:302 lme2510_update_stats() warn: should '((255 - st->signal_sn - 161) * 3) << 8' be a 64 bit type? Both c_tmp and s_tmp actually stores a u16 stat. Using a u64 data there is a waste, specially on u32 archs, as 64 ints there are more expensive. So, change the types to u32 and do the typecast only when storing the result. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-10[media] lmedm04: implement dvb v5 statisticsMalcolm Priestley
Indroduce function lme2510_update_stats to update statistics directly from usb interrupt. Provide signal and snr wrap rounds for dvb v3 functions. Block and post bit are not available. When i2c_talk_onoff is on no statistics are available, with possible future hand over to the relevant frontend/tuner. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-10[media] lmedm04: Enable dont_poll for TS2020 tunerMalcolm Priestley
Following a change made to TS2020 tuner in patches ts2020: Provide DVBv5 API signal strength ts2020: Allow stats polling to be suppressed Polling on the driver must be suppressed because the demuxer is stopped by I2C messages. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-10[media] TS2020: Calculate tuner gain correctlyDavid Howells
The TS2020 and TS2022 tuners take an input from the demodulator indicating the AGC setting on that component that is then used to influence the tuner's own gain. This should be taken into account when calculating the gain and signal strength. Further, the existing TS2020 driver miscalculates the signal strength as the result of its calculations can exceed the storage capacity of the 16-bit word used to return it to userspace. To this end: (1) Add a callback function (->get_agc_pwm()) in the ts2020_config struct that the tuner can call to get the AGC PWM value from the demodulator. (2) Modify the TS2020 driver to calculate the gain according to Montage's specification with the adjustment that we produce a negative value and scale it to 0.001dB units (which is what the DVBv5 API will require): (a) Callback to the demodulator to retrieve the AGC PWM value and then turn that into Vagc for incorporation in the calculations. If the callback is unset, assume a Vagc of 0. (b) Calculate the tuner gain from a combination of Vagc and the tuner's RF gain and baseband gain settings. (3) Turn this into a percentage signal strength as per Montage's specification for return to userspace with the DVBv3 API. (4) Provide a function in the M88DS3103 demodulator driver that can be used to get the AGC PWM value on behalf of the tuner. (5) The ts2020_config.get_agc_pwm function should be set by the code that stitches together the drivers for each card. For the DVBSky cards that use the M88DS3103 with the TS2020 or the TS2022, set the get_agc_pwm function to point to m88ds3103_get_agc_pwm. I have tested this with a DVBSky S952 card which has an M88DS3103 and a TS2022. Thanks to Montage for providing access to information about the workings of these parts. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09[media] dvb: Get rid of typedev usage for enumsMauro Carvalho Chehab
The DVB API was originally defined using typedefs. This is against Kernel CodingStyle, and there's no good usage here. While we can't remove its usage on userspace, we can avoid its usage in Kernelspace. So, let's do it. This patch was generated by this shell script: for j in $(grep typedef include/uapi/linux/dvb/frontend.h |cut -d' ' -f 3); do for i in $(find drivers/media -name '*.[ch]' -type f) $(find drivers/staging/media -name '*.[ch]' -type f); do sed "s,${j}_t,enum $j," <$i >a && mv a $i; done; done While here, make CodingStyle fixes on the affected lines. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> # for drivers/media/firewire/*
2015-05-30[media] af9035: add USB ID 07ca:0337 AVerMedia HD Volar (A867)Antti Palosaari
It is AF9035 + MxL5007T. Driver reports: prechip_version=00 chip_version=03 chip_type=3802 Not sure if that USB ID is reserved only for HP brand or if it is common, but the stick I have is branded as HP part no. 580715-001 rmn A867. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-18[media] rtl28xxu: load SDR module for fc2580 based devicesAntti Palosaari
Load rtl2832_sdr driver for devices having fc2580 tuner. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-18[media] rtl28xxu: set correct FC2580 tuner for RTL2832 demodAntti Palosaari
rtl2832 demod driver has support for FC2580 tuner config, no need to abuse FC0012 settings anymore. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-18[media] rtl28xxu: bind tua9001 using I2C bindingAntti Palosaari
Change tua9001 driver from media binding to I2C client binding. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-18[media] af9035: bind tua9001 using I2C bindingAntti Palosaari
Change tua9001 driver from media binding to I2C client binding. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-18[media] af9035: fix device order in ID listAntti Palosaari
Driver supports multiple chipset versions. Devices are ordered to ID table per used chipset type. "ITE 9303 Generic" device uses IT9303 chipset and was added mistakenly between IT9135 IDs. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-18[media] af9035: bind fc2580 using I2C bindingAntti Palosaari
Change fc2580 driver from media binding to I2C client binding. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-18[media] rtl28xxu: bind fc2580 using I2C bindingAntti Palosaari
Change fc2580 driver from media binding to I2C client binding. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-12[media] rtl28xxu: fix return value check in rtl2832u_tuner_attach()Wei Yongjun
In case of error, the function platform_device_register_data() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-12[media] rtl2832: add support for GoTView MasterHD 3 USB tunerOlli Salonen
GoTView MasterHD 3 is a DVB-T2/C USB 2.0 tuner. It's based on the following components: - USB bridge: RTL2832P (contains also DVB-T demodulator) - Demodulator: Si2168-A30 - Tuner: Si2148-A20 The demodulator and the tuner will need firmwares. The Si2148 uses Si2158 firmware. Antti has the firmwares available for download: http://palosaari.fi/linux/v4l-dvb/firmware/ Do note that for DVB-T either of the demodulators can be used. DVB-C and DVB-T2 are only supported by the Si2168 demodulator. The driver will register 2 frontends for the same adapter. Frontend 0 will be the RTL2832 demodulator and frontend 1 will be the Si2168 demodulator. The same tuner is used for both. As a consequence of the above, it's recommended to use application that does implement proper DVBv5 support. For some reason, the old I2C write method sporadically fails. Thus the need for an option to only use the new I2C write method supported by the RTL2832. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-12[media] rtl28xxu: add I2C read without writeOlli Salonen
Add support for I2C read operation without a preceeding write. While here, change the error code to EOPNOTSUPP in case an unsupported I2C operation is attempted. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-12[media] si2157: support selection of IF interfaceOlli Salonen
The chips supported by the si2157 driver have two IF outputs (either pins 12+13 or pins 9+11). Instead of hardcoding the output to be used add an option to choose which output shall be used. As this patch changes the default behaviour, the IF interface is specified in each driver currently using si2157 driver. This is to keep bisectability. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-12[media] dvbsky: use si2168 config option ts_clock_gappedOlli Salonen
Change the dvbsky driver to support gapped clock instead of the current hack. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-04-21Merge branch 'patchwork' into v4l_for_linusMauro Carvalho Chehab
* patchwork: (404 commits) [media] uvcvideo: add support for VIDIOC_QUERY_EXT_CTRL [media] uvcvideo: fix cropcap v4l2-compliance failure [media] media: omap3isp: remove unused clkdev [media] coda: Add tracing support [media] coda: drop dma_sync_single_for_device in coda_bitstream_queue [media] coda: fix fill bitstream errors in nonstreaming case [media] coda: call SEQ_END when the first queue is stopped [media] coda: fail to start streaming if userspace set invalid formats [media] coda: remove duplicate error messages for buffer allocations [media] coda: move parameter buffer in together with context buffer allocation [media] coda: allocate bitstream buffer from REQBUFS, size depends on the format [media] coda: allocate per-context buffers from REQBUFS [media] coda: use strlcpy instead of snprintf [media] coda: bitstream payload is unsigned [media] coda: fix double call to debugfs_remove [media] coda: check kasprintf return value in coda_open [media] coda: bitrate can only be set in kbps steps [media] v4l2-mem2mem: no need to initialize b in v4l2_m2m_next_buf and v4l2_m2m_buf_remove [media] s5p-mfc: set allow_zero_bytesused flag for vb2_queue_init [media] coda: set allow_zero_bytesused flag for vb2_queue_init ...
2015-04-08[media] WinFast DTV2000 DS PlusChristian Dale
Add Leadtek WinFast DTV2000DS Plus device based on Realtek RTL2832U. I have not tested the remote, but it is the Y04G0051 model. Signed-off-by: Christian Dale <kernel@techmunk.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-04-08[media] rtl28xxu: add support for Turbo-X DTT2000Dimitris Lampridis
ID 1b80:d3a4 Afatech Simply added the PID (0xd3a4) of this DVB-T USB device to the list of rtl2832u-supported devices. VID (0x1b80) is same as KWORLD2. Tested and verified to work in amd64 with kernels 3.13.0 and 3.16.0. Signed-off-by: Dimitris Lampridis <dlampridis@logikonlabs.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-04-08[media] mn88472: add ts mode and ts clock to driverBenjamin Larsson
Signed-off-by: Benjamin Larsson <benjamin@southpole.se> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-04-02[media] dvbsky: switch ts2022 to ts2020 driverAntti Palosaari
Change ts2022 driver to ts2020 driver. ts2020 driver supports both tuner chip models. Cc: Nibble Max <nibble.max@gmail.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-04-02[media] rtl28xxu: lower the rc poll time to mitigate i2c transfer errorsBenjamin Larsson
The Astrometa device has issues with i2c transfers. Lowering the poll time somehow makes these errors disappear. Signed-off-by: Benjamin Larsson <benjamin@southpole.se> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-04-02[media] rtl28xxu: return success for unimplemented FE callbackAntti Palosaari
Return success for FE callback on case we don't have any special implementation. fc0013 tuner driver calls that callback in order to switch antenna input, even we don't provide antenna switch. Returning error caused fc0013 driver given up tuning. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-02[media] use a function for DVB media controller registerMauro Carvalho Chehab
This is really a simple function, but using it avoids to have if's inside the drivers. Also, the kABI becomes a little more clearer. This shouldn't generate any overhead, and the type check will happen when compiling with MC DVB enabled. So, let's do it. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-02[media] dvb: Avoid warnings when compiled without the media controllerMauro Carvalho Chehab
drivers/media/usb/dvb-usb-v2/dvb_usb_core.c: In function ‘dvb_usbv2_adapter_dvb_exit’: drivers/media/usb/dvb-usb-v2/dvb_usb_core.c:531:25: warning: unused variable ‘d’ [-Wunused-variable] struct dvb_usb_device *d = adap_to_d(adap); ^ drivers/media/usb/dvb-usb-v2/dvb_usb_core.c:403:13: warning: ‘dvb_usbv2_media_device_register’ defined but not used [-Wunused-function] static void dvb_usbv2_media_device_register(struct dvb_usb_adapter *adap) drivers/media/usb/dvb-usb/dvb-usb-dvb.c:97:13: warning: ‘dvb_usb_media_device_register’ defined but not used [-Wunused-function] static void dvb_usb_media_device_register(struct dvb_usb_adapter *adap) ^ Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-02[media] dvbdev: use adapter arg for dvb_create_media_graph()Mauro Carvalho Chehab
Instead of using media_dev argument for dvb_create_media_graph(), use the adapter. That allows to create a stub for this function, if compiled without DVB support, avoiding to add extra if's at the drivers. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-26[media] dvb-usb-v2: create one media_dev per adapterMauro Carvalho Chehab
Instead of assuming just one adapter, change the code to store one media controller per adapter. This works fine for dvb-usb, as, on all drivers here, it is not possible to write a media graph that would mix resources between the two different adapters. Acked-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-26[media] dvb-usb-v2: add support for the media controller at USB driverRafael Lourenço de Lima Chehab
Create a struct media_device and add it to the dvb adapter. Please notice that the tuner is not mapped yet by the dvb core. [mchehab@osg.samsung.com: use config option MEDIA_CONTROLLER_DVB due to a rebase] Signed-off-by: Rafael Lourenço de Lima Chehab <chehabrafael@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] lmedm04: add read snr, signal strength and ber call backsMalcolm Priestley
This allows calling the original functions providing the streaming is off. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] lmedm04: Create frontend call back for read statusMalcolm Priestley
Create dm04_read_status to check lock through either interrupt values or directly by the call back. When the device is not streaming the frontends original call back is used. When streaming has started it turns off I2C messaging by setting st->i2c_talk_onoff to zero. I2C can only be turn on again by one of the other allowed frontend calls. All old code is removed from lme2510_msg and this function only needs to set st->i2c_talk_onoff to 1. The lock status is saved and when the frondend is locked is maintained by lme2510_int_response who will now just kill the lock. The call back for rs2000 tuner is nologer required. All frontend types have been tested. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] lmedm04: create frontend callbacks for signal/snr/ber/ucblocksMalcolm Priestley
Create call backs dm04_read_signal_strength, dm04_read_snr and move dm04_read_ber and dm04_read_ucblocks for all frontends Removing the I2C filtering from lme2510_msg and the old rs2000 callbacks. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] lmedm04: Fix usb_submit_urb BOGUS urb xfer, pipe 1 != type 3 in ↵Malcolm Priestley
interrupt urb A quirk of some older firmwares that report endpoint pipe type as PIPE_BULK but the endpoint otheriwse functions as interrupt. Check if usb_endpoint_type is USB_ENDPOINT_XFER_BULK and set as usb_rcvbulkpipe. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] lmedm04: Increase Interupt due time to 200 msecMalcolm Priestley
Ocassionally the device fails to report back an interrupt urb status which results in false no lock trigger on the RS2000 demodulator. Increase time from 60 msecs to 200 msecs. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Cc: <stable@vger.kernel.org> # v3.17+ Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl28xxu: properly initialize pdataMauro Carvalho Chehab
As complained by smatch: drivers/media/usb/dvb-usb-v2/rtl28xxu.c:1159 rtl2832u_tuner_attach() info: 'pdata' is not actually initialized (unreached code). Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl28xxu: correct reg access routine name prefixesAntti Palosaari
Use rtl28xxu_ prefix for all register access routine names. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl28xxu: merge rtl2831u and rtl2832u propertiesAntti Palosaari
As all the callbacks are already same we could merge device properties struct too and save space. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl28xxu: merge chip type specific all callbacksAntti Palosaari
Merge all chip type specific prefixed (rtl2831u_ and rtl2832u_) callback to top level callback prefixed as rtl28xxu_. rtl2831u_foo() => rtl28xxu_foo() rtl2832u_foo() => rtl28xxu_foo() Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl28xxu: add heuristic to detect chip typeAntti Palosaari
Detect automatically whether chip is old RTL2831U or newer RTL2832U/RTL2832P. Detection is based I2C command that is found only from newer RTL2832U models. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl28xxu: move usb buffers to stateAntti Palosaari
Buffer needed for USB control message is small so move it to state and get rid of alloc/free used for each control message. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl28xxu: fix loggingAntti Palosaari
Pass correct device pointer to dev_* logging in order to print module name and bus id correctly. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl28xxu: rename state variable 'priv' to 'dev'Antti Palosaari
I prefer dev over priv and I want keep all my drivers in line with that. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl28xxu: do not refcount rtl2832_sdr moduleAntti Palosaari
This driver, rtl28xxu, offers frontend service for rtl2832_sdr module, thus we are producer and rtl2832_sdr module is consumer. Due to that, reference counting should be done in way rtl2832_sdr takes refrence to rtl28xxu. Remove wrong refcount. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl28xxu: simplify FE callback handlingAntti Palosaari
Logic is so simple that there is no idea to separate tuner selection to own function, instead do it in a callback and get rid of one function. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl28xxu: fix DVB FE callbackAntti Palosaari
DVB FE callback functionality went broken after I moved tuners to demod muxed I2C adapter. That happens because driver state was carried by I2C adapter and when mux is used there is one adapter more in a chain. USB adapter <-> I2C adapter <-> muxed I2C adapter Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl28xxu: use master I2C adapter for slave demodsAntti Palosaari
Both mn88472 and mn88473 slave demods are connected to master I2C bus, not the bus behind master demod I2C gate like tuners. Use correct bus. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-03[media] rtl28xxu: switch SDR module to platform driverAntti Palosaari
RTL2832 SDR module implements kernel platform driver. Change old binding to that one. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
generated by cgit v1.2.3 (git 2.46.0) at 2026-04-24 11:21:26 +0000