summaryrefslogtreecommitdiff
path: root/drivers/input
AgeCommit message (Collapse)Author
2020-11-18Input: adp5589-keys - use device-managed function in adp5589_keypad_add()Alexandru Ardelean
This change makes use of the devm_input_allocate_device() function, which gets rid of the input_free_device() and input_unregister_device() calls. When a device is allocated via input_allocate_device(), the input_register_device() call will also be device-managed, so there is no longer need to manually call unregister. Also, the irq is allocated with the devm_request_threaded_irq(), so with these two changes, the adp5589_keypad_remove() function is no longer needed. This cleans up the error & exit paths. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20201112074308.71351-3-alexandru.ardelean@analog.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-18Input: adp5589-keys - use devm_kzalloc() to allocate the kpad objectAlexandru Ardelean
This removes the need to manually free the kpad object and cleans up some exit/error paths. The error path cleanup should reduce the risk of any memory leaks with this object. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20201112074308.71351-2-alexandru.ardelean@analog.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-17Input: atmel_mxt_ts - support regulator suppliesLinus Walleij
This adds the code for the Atmel touchscreens such as mXT224 to obtain power regulators for the supply voltages AVDD and VDD. On mobile phones such as Samsung GT-I8190 (Golden) this is needed to explicitly bring power online. We just enable the regulators at probe() and disable them at remove() or in the error path for now. As regulators are naturally stubbed if not available, this should have no impact on existing systems. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20201104153032.1387747-3-linus.walleij@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-17Input: atmel_mxt_ts - fix up inverted RESET handlerLinus Walleij
This driver uses GPIO descriptors to drive the touchscreen RESET line. In the existing device trees this has in conflict with intution been flagged as GPIO_ACTIVE_HIGH and the driver then applies the reverse action by driving the line low (setting to 0) to enter reset state and driving the line high (setting to 1) to get out of reset state. The correct way to handle active low GPIO lines is to provide the GPIO_ACTIVE_LOW in the device tree (thus properly describing the hardware) and letting the GPIO framework invert the assertion (driving high) to a low level and vice versa. This is considered a bug since the device trees are incorrectly mis-specifying the line as active high. Fix the driver and all device trees specifying a reset line. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Philippe Schenker <philippe.schenker@toradex.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201104153032.1387747-1-linus.walleij@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-17Merge tag 'v5.9' into nextDmitry Torokhov
Sync up with mainline to bring in the latest DTS files.
2020-11-17Input: elan_i2c_core - move header inclusion insideLee Jones
The same clause as its use. Fixes the following W=1 kernel build warning(s): include/linux/input/elan-i2c-ids.h:26:36: warning: ‘elan_acpi_id’ defined but not used [-Wunused-const-variable=] Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20201112104420.GG1997862@dell Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-17Input: ads7846 - drop unneeded asm/irq.h includeDmitry Torokhov
This is essentially a revert of: 3ac8bf077d0f ("[PATCH] ads7846: sparc32 warning fix") By now enable_irq() and disable_irq() are properly defined in linux/interrupt.h and we do not need to pull in architecture-specific bits. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-17Input: ads7846 - fix unaligned access on 7845Dmitry Torokhov
req->sample[1] is not naturally aligned at word boundary, and therefore we should use get_unaligned_be16() when accessing it. Fixes: 3eac5c7e44f3 ("Input: ads7846 - extend the driver for ads7845 controller support") Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-17Input: ads7846 - fix integer overflow on Rt calculationOleksij Rempel
In some rare cases the 32 bit Rt value will overflow if z2 and x is max, z1 is minimal value and x_plate_ohms is relatively high (for example 800 ohm). This would happen on some screen age with low pressure. There are two possible fixes: - make Rt 64bit - reorder calculation to avoid overflow The second variant seems to be preferable, since 64 bit calculation on 32 bit system is a bit more expensive. Fixes: ffa458c1bd9b6f653008d450f337602f3d52a646 ("spi: ads7846 driver") Co-developed-by: David Jander <david@protonic.nl> Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20201113112240.1360-1-o.rempel@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-17Input: ads7846 - convert to full duplexOleksij Rempel
Starting with 3eac5c7e44f3 ("Input: ads7846 - extend the driver for ads7845 controller support"), the ads7845 was partially converted to full duplex mode. Since it is not touchscreen controller specific, it is better to extend this conversion to cover entire driver. This will reduce CPU load and make driver more readable. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20201110085041.16303-2-o.rempel@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-17Input: ads7846 - fix race that causes missing releasesDavid Jander
If touchscreen is released while busy reading HWMON device, the release can be missed. The IRQ thread is not started because no touch is active and BTN_TOUCH release event is never sent. Fixes: f5a28a7d4858f94a ("Input: ads7846 - avoid pen up/down when reading hwmon") Co-developed-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20201027105416.18773-1-o.rempel@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-17Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "A fix for use-after-free in the Sun keyboard driver, a fix to firmware updates on newer ICs in the Elan touchpad diver, and a couple misc driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elan_i2c - fix firmware update on newer ICs Input: resistive-adc-touch - fix kconfig dependency on IIO_BUFFER Input: sunkbd - avoid use-after-free in teardown paths Input: i8042 - allow insmod to succeed on devices without an i8042 controller Input: adxl34x - clean up a data type in adxl34x_probe()
2020-11-12Input: imx6ul_tsc - remove set but unused variable 'value'Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/input/touchscreen/imx6ul_tsc.c: In function ‘adc_irq_fn’: drivers/input/touchscreen/imx6ul_tsc.c:307:6: warning: variable ‘value’ set but not used [-Wunused-but-set-variable] Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Haibo Chen <haibo.chen@nxp.com> Link: https://lore.kernel.org/r/20201112110204.2083435-6-lee.jones@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-12Input: samsung-keypad - remove set but unused variable 'var'Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/input/keyboard/samsung-keypad.c: In function ‘samsung_keypad_irq’: drivers/input/keyboard/samsung-keypad.c:149:15: warning: variable ‘val’ set but not used [-Wunused-but-set-variable] Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20201112110204.2083435-3-lee.jones@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-12Input: ads7846: do not overwrite spi->mode flags set by spi frameworkOleksij Rempel
Do not overwrite spi->mode flags set by spi framework, otherwise the chip select polarity will get lost. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Link: https://lore.kernel.org/r/20201027095724.18654-3-o.rempel@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2020-11-11Input: elan_i2c - fix firmware update on newer ICsjingle.wu
The argument to iap page type command depends on the firmware page size. Fixes: bfd9b92bc8f9 ("Input: elan_i2c - handle firmware updated on newer ICs") Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-11Input: st1232 - add support resolution readingAndrej Valek
Hard-coding resolution for st1633 device was wrong. Some of LCDs like YTS700TLBC-02-100C has assembled Sitronix st1633 touchcontroller too. But the resolution is not 320x480 as was hard-coded. Add new function which reads correct resolution directly from register. Signed-off-by: Andrej Valek <andrej.valek@siemens.com> Link: https://lore.kernel.org/r/20201103073949.12198-1-andrej.valek@siemens.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-11Input: resistive-adc-touch - fix kconfig dependency on IIO_BUFFERNecip Fazil Yildiran
When TOUCHSCREEN_ADC is enabled and IIO_BUFFER is disabled, it results in the following Kbuild warning: WARNING: unmet direct dependencies detected for IIO_BUFFER_CB Depends on [n]: IIO [=y] && IIO_BUFFER [=n] Selected by [y]: - TOUCHSCREEN_ADC [=y] && !UML && INPUT [=y] && INPUT_TOUCHSCREEN [=y] && IIO [=y] The reason is that TOUCHSCREEN_ADC selects IIO_BUFFER_CB without depending on or selecting IIO_BUFFER while IIO_BUFFER_CB depends on IIO_BUFFER. This can also fail building the kernel. Honor the kconfig dependency to remove unmet direct dependency warnings and avoid any potential build failures. Fixes: aa132ffb6b0a ("input: touchscreen: resistive-adc-touch: add generic resistive ADC touchscreen") Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20201102221504.541279-1-fazilyildiran@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-09Input: synaptics-rmi4 - fix kerneldoc warningsLee Jones
Fixes the kerneldoc warnings from building the driver with W=1. Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20201104162427.2984742-2-lee.jones@linaro.org [dtor: folded together several Lee's patches; added more descriptions] Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-08Input: cyttsp4 - move 'cyttsp4_tch_abs_string' to the only file that ↵Lee Jones
references it Fixes the following W=1 kernel build warning(s): In file included from drivers/input/touchscreen/cyttsp_i2c_common.c:24: drivers/input/touchscreen/cyttsp4_core.h:236:27: warning: ‘cyttsp4_tch_abs_string’ defined but not used [-Wunused-const-variable=] 236 | static const char const cyttsp4_tch_abs_string[] = { | ^~~~~~~~~~~~~~~~~~~~~~ In file included from drivers/input/touchscreen/cyttsp4_i2c.c:17: drivers/input/touchscreen/cyttsp4_core.h:236:27: warning: ‘cyttsp4_tch_abs_string’ defined but not used [-Wunused-const-variable=] 236 | static const char * const cyttsp4_tch_abs_string[] = { | ^~~~~~~~~~~~~~~~~~~~~~ In file included from drivers/input/touchscreen/cyttsp4_spi.c:17: drivers/input/touchscreen/cyttsp4_core.h:236:27: warning: ‘cyttsp4_tch_abs_string’ defined but not used [-Wunused-const-variable=] 236 | static const char * const cyttsp4_tch_abs_string[] = { | ^~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20201104162427.2984742-16-lee.jones@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-08Input: resistive-adc-touch - struct headers should start with 'struct <name>'Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/input/touchscreen/resistive-adc-touch.c:34: warning: cannot understand function prototype: 'struct grts_state ' Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20201104162427.2984742-10-lee.jones@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-08Input: analog - fix formatting of error codeZhang Qilong
The location of the minus sign and the error code are linked together for better human view. Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Link: https://lore.kernel.org/r/20201027135020.66632-1-zhangqilong3@huawei.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-08Input: cyapa_gen5 - fix obvious abuse of kernel-doc formatLee Jones
Fixes the following W=1 kernel build warning(s): drivers/input/mouse/cyapa_gen5.c:392: warning: Function parameter or member 'cyapa' not described in 'cyapa_i2c_pip_write' drivers/input/mouse/cyapa_gen5.c:392: warning: Function parameter or member 'buf' not described in 'cyapa_i2c_pip_write' drivers/input/mouse/cyapa_gen5.c:392: warning: Function parameter or member 'size' not described in 'cyapa_i2c_pip_write' drivers/input/mouse/cyapa_gen5.c:444: warning: Function parameter or member 'cyapa' not described in 'cyapa_empty_pip_output_data' drivers/input/mouse/cyapa_gen5.c:444: warning: Function parameter or member 'buf' not described in 'cyapa_empty_pip_output_data' drivers/input/mouse/cyapa_gen5.c:444: warning: Function parameter or member 'len' not described in 'cyapa_empty_pip_output_data' drivers/input/mouse/cyapa_gen5.c:444: warning: Function parameter or member 'func' not described in 'cyapa_empty_pip_output_data' Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20201104162427.2984742-4-lee.jones@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-08Input: cyapa - fix misnaming of 'cyapa_i2c_write's 'reg' paramLee Jones
Fixes the following W=1 kernel build warning(s): drivers/input/mouse/cyapa.c:130: warning: Function parameter or member 'reg' not described in 'cyapa_i2c_write' drivers/input/mouse/cyapa.c:130: warning: Excess function parameter 'ret' description in 'cyapa_i2c_write' Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Benson Leung <bleung@chromium.org> Link: https://lore.kernel.org/r/20201104162427.2984742-3-lee.jones@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-08Input: ab8500-ponkey - fix incorrect name in 'ab8500_ponkey' doc headerLee Jones
Fixes the following W=1 kernel build warning(s): drivers/input/misc/ab8500-ponkey.c:32: warning: Function parameter or member 'idev' not described in 'ab8500_ponkey' Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20201104162427.2984742-5-lee.jones@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-08Input: cros_ec_keyb - struct headers should start with 'struct <name>'Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/input/keyboard/cros_ec_keyb.c:72: warning: cannot understand function prototype: 'struct cros_ec_bs_map ' Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Benson Leung <bleung@chromium.org> Link: https://lore.kernel.org/r/20201104162427.2984742-8-lee.jones@linaro.org [dtor: fixed up docbook comments for cros_ec_keyb structure as well] Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-08Input: gpio_keys - fix misnamed function parameter 'dev'Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/input/keyboard/gpio_keys.c:119: warning: Function parameter or member 'dev' not described in 'get_bm_events_by_type' drivers/input/keyboard/gpio_keys.c:119: warning: Excess function parameter 'input' description in 'get_bm_events_by_type' Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20201104162427.2984742-12-lee.jones@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-08Input: elantech - demote obvious abuse of kernel-doc headerLee Jones
Fixes the following W=1 kernel build warning(s): drivers/input/mouse/elantech.c:1837: warning: Function parameter or member 'psmouse' not described in 'elantech_setup_smbus' drivers/input/mouse/elantech.c:1837: warning: Function parameter or member 'info' not described in 'elantech_setup_smbus' drivers/input/mouse/elantech.c:1837: warning: Function parameter or member 'leave_breadcrumbs' not described in 'elantech_setup_smbus' Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20201104162427.2984742-13-lee.jones@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-08Input: pmic8xxx-keypad - fix kernel-doc formattingLee Jones
Fixes the following W=1 kernel build warning(s): drivers/input/keyboard/pmic8xxx-keypad.c:106: warning: Function parameter or member 'num_rows' not described in 'pmic8xxx_kp' drivers/input/keyboard/pmic8xxx-keypad.c:106: warning: Function parameter or member 'num_cols' not described in 'pmic8xxx_kp' drivers/input/keyboard/pmic8xxx-keypad.c:106: warning: Function parameter or member 'input' not described in 'pmic8xxx_kp' drivers/input/keyboard/pmic8xxx-keypad.c:106: warning: Function parameter or member 'regmap' not described in 'pmic8xxx_kp' drivers/input/keyboard/pmic8xxx-keypad.c:106: warning: Function parameter or member 'key_sense_irq' not described in 'pmic8xxx_kp' drivers/input/keyboard/pmic8xxx-keypad.c:106: warning: Function parameter or member 'key_stuck_irq' not described in 'pmic8xxx_kp' drivers/input/keyboard/pmic8xxx-keypad.c:106: warning: Function parameter or member 'keycodes' not described in 'pmic8xxx_kp' drivers/input/keyboard/pmic8xxx-keypad.c:106: warning: Function parameter or member 'dev' not described in 'pmic8xxx_kp' drivers/input/keyboard/pmic8xxx-keypad.c:106: warning: Function parameter or member 'keystate' not described in 'pmic8xxx_kp' drivers/input/keyboard/pmic8xxx-keypad.c:106: warning: Function parameter or member 'stuckstate' not described in 'pmic8xxx_kp' drivers/input/keyboard/pmic8xxx-keypad.c:106: warning: Function parameter or member 'ctrl_reg' not described in 'pmic8xxx_kp' Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20201104162427.2984742-21-lee.jones@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-08Input: nomadik-ske-keypad - provide some missing struct member docsLee Jones
Fixes the following W=1 kernel build warning(s): drivers/input/keyboard/nomadik-ske-keypad.c:71: warning: Function parameter or member 'pclk' not described in 'ske_keypad' drivers/input/keyboard/nomadik-ske-keypad.c:71: warning: Function parameter or member 'ske_keypad_lock' not described in 'ske_keypad' Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20201104162427.2984742-20-lee.jones@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-08Input: drv2667 - fix formatting and add missing member docsLee Jones
Fixes the following W=1 kernel build warning(s): drivers/input/misc/drv2667.c:109: warning: Function parameter or member 'input_dev' not described in 'drv2667_data' drivers/input/misc/drv2667.c:109: warning: Function parameter or member 'client' not described in 'drv2667_data' drivers/input/misc/drv2667.c:109: warning: Function parameter or member 'regmap' not described in 'drv2667_data' drivers/input/misc/drv2667.c:109: warning: Function parameter or member 'work' not described in 'drv2667_data' drivers/input/misc/drv2667.c:109: warning: Function parameter or member 'regulator' not described in 'drv2667_data' drivers/input/misc/drv2667.c:109: warning: Function parameter or member 'page' not described in 'drv2667_data' drivers/input/misc/drv2667.c:109: warning: Function parameter or member 'magnitude' not described in 'drv2667_data' drivers/input/misc/drv2667.c:109: warning: Function parameter or member 'frequency' not described in 'drv2667_data' Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20201104162427.2984742-19-lee.jones@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-08Input: drv2665 - fix formatting expected by kernel-docLee Jones
Fixes the following W=1 kernel build warning(s): drivers/input/misc/drv2665.c:59: warning: Function parameter or member 'input_dev' not described in 'drv2665_data' drivers/input/misc/drv2665.c:59: warning: Function parameter or member 'client' not described in 'drv2665_data' drivers/input/misc/drv2665.c:59: warning: Function parameter or member 'regmap' not described in 'drv2665_data' drivers/input/misc/drv2665.c:59: warning: Function parameter or member 'work' not described in 'drv2665_data' drivers/input/misc/drv2665.c:59: warning: Function parameter or member 'regulator' not described in 'drv2665_data' Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20201104162427.2984742-18-lee.jones@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-08Input: drv260x - fix kernel-doc formatting and remove one abuseLee Jones
Fixes the following W=1 kernel build warning(s): drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'input_dev' not described in 'drv260x_data' drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'client' not described in 'drv260x_data' drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'regmap' not described in 'drv260x_data' drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'work' not described in 'drv260x_data' drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'enable_gpio' not described in 'drv260x_data' drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'regulator' not described in 'drv260x_data' drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'magnitude' not described in 'drv260x_data' drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'mode' not described in 'drv260x_data' drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'library' not described in 'drv260x_data' drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'rated_voltage' not described in 'drv260x_data' drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'overdrive_voltage' not described in 'drv260x_data' drivers/input/misc/drv260x.c:244: warning: Function parameter or member 'voltage' not described in 'drv260x_calculate_voltage' Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20201104162427.2984742-17-lee.jones@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-08Input: sunkbd - avoid use-after-free in teardown pathsDmitry Torokhov
We need to make sure we cancel the reinit work before we tear down the driver structures. Reported-by: Bodong Zhao <nopitydays@gmail.com> Tested-by: Bodong Zhao <nopitydays@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-08Input: ads7846 - use kobj_to_dev() APIWang Qing
Use kobj_to_dev() instead of container_of(). Signed-off-by: Wang Qing <wangqing@vivo.com> Link: https://lore.kernel.org/r/1604893436-20206-1-git-send-email-wangqing@vivo.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-08Input: ektf2127 - add support for eKTF2132 touchscreenJonathan Neuschäfer
The eKTF2132 is a touchscreen controller found, for example, in the Kobo Aura ebook reader. It is similar to the ektf2127, but it uses a different packet type to report touch events. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Link: https://lore.kernel.org/r/20201106112412.390724-3-j.neuschaefer@gmx.net Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-10-26Input: i8042 - allow insmod to succeed on devices without an i8042 controllerHans de Goede
The i8042 module exports several symbols which may be used by other modules. Before this commit it would refuse to load (when built as a module itself) on systems without an i8042 controller. This is a problem specifically for the asus-nb-wmi module. Many Asus laptops support the Asus WMI interface. Some of them have an i8042 controller and need to use i8042_install_filter() to filter some kbd events. Other models do not have an i8042 controller (e.g. they use an USB attached kbd). Before this commit the asus-nb-wmi driver could not be loaded on Asus models without an i8042 controller, when the i8042 code was built as a module (as Arch Linux does) because the module_init function of the i8042 module would fail with -ENODEV and thus the i8042_install_filter symbol could not be loaded. This commit fixes this by exiting from module_init with a return code of 0 if no controller is found. It also adds a i8042_present bool to make the module_exit function a no-op in this case and also adds a check for i8042_present to the exported i8042_command function. The latter i8042_present check should not really be necessary because when builtin that function can already be used on systems without an i8042 controller, but better safe then sorry. Reported-and-tested-by: Marius Iacob <themariusus@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20201008112628.3979-2-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-10-26Input: adxl34x - clean up a data type in adxl34x_probe()Dan Carpenter
The "revid" is used to store negative error codes so it should be an int type. Fixes: e27c729219ad ("Input: add driver for ADXL345/346 Digital Accelerometers") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Link: https://lore.kernel.org/r/20201026072824.GA1620546@mwanda Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-10-25Merge branch 'parisc-5.10-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull more parisc updates from Helge Deller: - During this merge window O_NONBLOCK was changed to become 000200000, but we missed that the syscalls timerfd_create(), signalfd4(), eventfd2(), pipe2(), inotify_init1() and userfaultfd() do a strict bit-wise check of the flags parameter. To provide backward compatibility with existing userspace we introduce parisc specific wrappers for those syscalls which filter out the old O_NONBLOCK value and replaces it with the new one. - Prevent HIL bus driver to get stuck when keyboard or mouse isn't attached - Improve error return codes when setting rtc time - Minor documentation fix in pata_ns87415.c * 'parisc-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: ata: pata_ns87415.c: Document support on parisc with superio chip parisc: Add wrapper syscalls to fix O_NONBLOCK flag usage hil/parisc: Disable HIL driver when it gets stuck parisc: Improve error return codes when setting rtc time
2020-10-24Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM SoC platform updates from Olof Johansson: "SoC changes, a substantial part of this is cleanup of some of the older platforms that used to have a bunch of board files. In particular: - Remove non-DT i.MX platforms that haven't seen activity in years, it's time to remove them. - A bunch of cleanup and removal of platform data for TI/OMAP platforms, moving over to genpd for power/reset control (yay!) - Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them closer to multiplatform support (not quite there yet, but getting close). There are a few other changes too, smaller fixlets, etc. For new platform support, the primary ones are: - New SoC: Hisilicon SD5203, ARM926EJ-S platform. - Cpufreq support for i.MX7ULP" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits) ARM: mstar: Select MStar intc ARM: stm32: Replace HTTP links with HTTPS ones ARM: debug: add UART early console support for SD5203 ARM: hisi: add support for SD5203 SoC ARM: omap3: enable off mode automatically clk: imx: imx35: Remove mx35_clocks_init() clk: imx: imx31: Remove mx31_clocks_init() clk: imx: imx27: Remove mx27_clocks_init() ARM: imx: Remove unused definitions ARM: imx35: Retrieve the IIM base address from devicetree ARM: imx3: Retrieve the AVIC base address from devicetree ARM: imx3: Retrieve the CCM base address from devicetree ARM: imx31: Retrieve the IIM base address from devicetree ARM: imx27: Retrieve the CCM base address from devicetree ARM: imx27: Retrieve the SYSCTRL base address from devicetree ARM: s3c64xx: bring back notes from removed debug-macro.S ARM: s3c24xx: fix Wunused-variable warning on !MMU ARM: samsung: fix PM debug build with DEBUG_LL but !MMU MAINTAINERS: mark linux-samsung-soc list non-moderated ARM: imx: Remove remnant board file support pieces ...
2020-10-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - a new driver for ADC driven joysticks - a new Zintix touchscreen driver - enhancements to Intel SoC button array driver - support for F3A "function" in Synaptics RMI4 driver - assorted driver fixups * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (29 commits) Input: Add MAINTAINERS entry for SiS i2c touch input driver Input: evdev - per-client waitgroups Input: synaptics - enable InterTouch for ThinkPad T14 Gen 1 Input: synaptics - enable InterTouch for ThinkPad P1/X1E gen 2 Input: synaptics-rmi4 - support bootloader v8 in f34v7 Input: synaptics-rmi4 - add support for F3A Input: synaptics-rmi4 - rename f30_data to gpio_data Input: add zinitix touchscreen driver dt-bindings: input/touchscreen: add bindings for zinitix Input: joystick - add ADC attached joystick driver. dt-bindings: input: Add docs for ADC driven joystick Input: sun4i-ps2 - fix handling of platform_get_irq() error Input: twl4030_keypad - fix handling of platform_get_irq() error Input: omap4-keypad - fix handling of platform_get_irq() error Input: ep93xx_keypad - fix handling of platform_get_irq() error Input: stmfts - fix a & vs && typo Input: imx6ul_tsc - unify open/close and PM paths Input: imx6ul_tsc - clean up some errors in imx6ul_tsc_resume() Input: elants_i2c - fix typo for an attribute to show calibration count Input: elants_i2c - report resolution of ABS_MT_TOUCH_MAJOR by FW information. ...
2020-10-23Merge tag 'tag-chrome-platform-for-v5.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform updates from Benson Leung: "cros-ec: - Error code cleanup across cros-ec by Guenter - Remove cros_ec_cmd_xfer in favor of cros_ec_cmd_xfer_status cros_ec_typec: - Landed initial USB4 support in typec connector class driver for cros_ec - Role switch bugfix on disconnect, and reordering configuration steps cros_ec_lightbar: - Fix buffer outsize and result for get_lightbar_version misc: - Remove config MFD_CROS_EC, now that transition from MFD is complete - Enable KEY_LEFTMETA in new location on arm based cros-ec-keyboard keymap" * tag 'tag-chrome-platform-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: ARM: dts: cros-ec-keyboard: Add alternate keymap for KEY_LEFTMETA platform/chrome: Use kobj_to_dev() instead of container_of() platform/chrome: cros_ec_proto: Drop cros_ec_cmd_xfer() platform/chrome: cros_ec_proto: Update cros_ec_cmd_xfer() call-sites platform/chrome: Kconfig: Remove the transitional MFD_CROS_EC config platform/chrome: cros_ec_lightbar: Reduce ligthbar get version command platform/chrome: cros_ec_trace: Add fields to command traces platform/chrome: cros_ec_typec: Re-order connector configuration steps platform/chrome: cros_ec_typec: Avoid setting usb role twice during disconnect platform/chrome: cros_ec_typec: Send enum values to usb_role_switch_set_role() platform/chrome: cros_ec_typec: USB4 support pwm: cros-ec: Simplify EC error handling platform/chrome: cros_ec_proto: Convert EC error codes to Linux error codes platform/input: cros_ec: Replace -ENOTSUPP with -ENOPROTOOPT pwm: cros-ec: Accept more error codes from cros_ec_cmd_xfer_status platform/chrome: cros_ec_sysfs: Report range of error codes from EC cros_ec_lightbar: Accept more error codes from cros_ec_cmd_xfer_status iio: cros_ec: Accept -EOPNOTSUPP as 'not supported' error code
2020-10-22hil/parisc: Disable HIL driver when it gets stuckHelge Deller
When starting a HP machine with HIL driver but without an HIL keyboard or HIL mouse attached, it may happen that data written to the HIL loop gets stuck (e.g. because the transaction queue is full). Usually one will then have to reboot the machine because all you see is and endless output of: Transaction add failed: transaction already queued? In the higher layers hp_sdc_enqueue_transaction() is called to queued up a HIL packet. This function returns an error code, and this patch adds the necessary checks for this return code and disables the HIL driver if further packets can't be sent. Tested on a HP 730 and a HP 715/64 machine. Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org>
2020-10-18Merge branch 'next' into for-linusDmitry Torokhov
Prepare input updates for 5.10 merge window.
2020-10-14Merge tag 'hyperv-next-signed' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull Hyper-V updates from Wei Liu: - a series from Boqun Feng to support page size larger than 4K - a few miscellaneous clean-ups * tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: hv: clocksource: Add notrace attribute to read_hv_sched_clock_*() functions x86/hyperv: Remove aliases with X64 in their name PCI: hv: Document missing hv_pci_protocol_negotiation() parameter scsi: storvsc: Support PAGE_SIZE larger than 4K Driver: hv: util: Use VMBUS_RING_SIZE() for ringbuffer sizes HID: hyperv: Use VMBUS_RING_SIZE() for ringbuffer sizes Input: hyperv-keyboard: Use VMBUS_RING_SIZE() for ringbuffer sizes hv_netvsc: Use HV_HYP_PAGE_SIZE for Hyper-V communication hv: hyperv.h: Introduce some hvpfn helper functions Drivers: hv: vmbus: Move virt_to_hvpfn() to hyperv header Drivers: hv: Use HV_HYP_PAGE in hv_synic_enable_regs() Drivers: hv: vmbus: Introduce types of GPADL Drivers: hv: vmbus: Move __vmbus_open() Drivers: hv: vmbus: Always use HV_HYP_PAGE_SIZE for gpadl drivers: hv: remove cast from hyperv_die_event
2020-10-06Input: evdev - per-client waitgroupsKenny Levinsen
All evdev clients share a common waitgroup. On new input events, all clients waiting on this waitgroup are woken up, even those filtering out the events, possibly more than once per event. This leads to duplicated and unwanted wakeups. Split the shared waitgroup into per-client waitgroups for more fine-grained wakeups. Signed-off-by: Kenny Levinsen <kl@kl.wtf> Link: https://lore.kernel.org/r/20200429184126.2155-1-kl@kl.wtf Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-10-05Input: synaptics - enable InterTouch for ThinkPad T14 Gen 1Hans de Goede
With the new RMI4 F3A support, we're now able to enable full RMI4 support for this model. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20201005114919.371592-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-10-04Input: synaptics - enable InterTouch for ThinkPad P1/X1E gen 2Jason A. Donenfeld
With the new RMI4 F3A support, we're now able to enable full RMI4 support for this model. We also tidy up the comments a bit, as the X1E is essentially the same computer as the P1. Acked-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Link: https://lore.kernel.org/r/20200930225046.173190-3-Jason@zx2c4.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-10-04Input: synaptics-rmi4 - support bootloader v8 in f34v7Jason A. Donenfeld
With the recent addition of the F3A support, we can now accept bootloader v8, which will help support recent Thinkpads. Acked-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Link: https://lore.kernel.org/r/20200930225046.173190-2-Jason@zx2c4.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-10-04Input: synaptics-rmi4 - add support for F3AVincent Huang
RMI4 F3A supports the touchpad GPIO function, it's designed to support more GPIOs and used on newer touchpads. This patch adds support of the touchpad buttons. Signed-off-by: Vincent Huang <vincent.huang@tw.synaptics.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andrew Duggan <aduggan@synaptics.com> Link: https://lore.kernel.org/r/20200930094147.635556-3-vincent.huang@tw.synaptics.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3 (git 2.46.0) at 2026-05-16 02:39:19 +0000