| Age | Commit message (Collapse) | Author |
|---|
|
To reduce queue switch latency further, move MQD to VRAM domain, CP
access MQD and control stack via FB aperture, this requires contiguous
pages.
After MQD is initialized, updated or restored, flush HDP to guarantee
the data is written to HBM and GPU cache is invalidated, then CP will
read the new MQD.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Merge Linux 6.19-rc1 in order to catch up with other changes (e.g. UBWC
config database defining UBWC_6).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Fix several issues in dw_dp_bind() error handling:
1. Missing return after drm_bridge_attach() failure - the function
continued execution instead of returning an error.
2. Resource leak: drm_dp_aux_register() is not a devm function, so
drm_dp_aux_unregister() must be called on all error paths after
aux registration succeeds. This affects errors from:
- drm_bridge_attach()
- phy_init()
- devm_add_action_or_reset()
- platform_get_irq()
- devm_request_threaded_irq()
3. Bug fix: platform_get_irq() returns the IRQ number or a negative
error code, but the error path was returning ERR_PTR(ret) instead
of ERR_PTR(dp->irq).
Use a goto label for cleanup to ensure consistent error handling.
Fixes: 86eecc3a9c2e ("drm/bridge: synopsys: Add DW DPTX Controller support library")
Cc: stable@vger.kernel.org
Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260102155553.13243-1-osama.abdelkader@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
of_drm_find_and_get_bridge()
of_drm_find_bridge() is deprecated. Move to its replacement
of_drm_find_and_get_bridge() which gets a bridge reference, and ensure it
is put when done. Also switch to the drm_bridge::next_bridge pointer.
This needs to handle both cases: when of_drm_find_panel() succeeds and when
it fails.
In the 'else' case (i.e. when of_drm_find_panel() fails), just switch to
of_drm_find_and_get_bridge() to ensure the bridge is not freed while in use
in the function tail, when it is stored in dsi->bridge.next_bridge.
In the 'then' case (i.e. when of_drm_find_panel() succeeds),
devm_drm_panel_bridge_add() already increments the refcount using devres
which ties the bridge allocation lifetime to the device lifetime, so we
would not need to do anything. However to have the same behaviour in both
branches take an additional reference here, so that the bridge needs to be
put whichever branch is taken without more complicated logic. Ensure to
clear the bridge pointer however, to avoid calling drm_bridge_put() on an
ERR_PTR.
Acked-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20260109-drm-bridge-alloc-getput-drm_of_find_bridge-2-v2-12-8bad3ef90b9f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
pointer as an error indicator
In preparation to handle refcounting of the out_bridge, we need to ensure
the out_bridge pointer contains either a valid bridge pointer or NULL, not
an ERR_PTR. Otherwise calls such as drm_bridge_get/put() would try to
redeference an ERR_PTR.
Stop using IS_ERR(next_bridge) as an indication of an error, and instead
use the 'ret' integer.
No functional change.
Acked-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20260109-drm-bridge-alloc-getput-drm_of_find_bridge-2-v2-11-8bad3ef90b9f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
for the next bridge
In preparation to handle refcounting of the out_bridge, we need to ensure
the out_bridge pointer contains either a valid bridge pointer or NULL, not
an ERR_PTR. Otherwise calls such as drm_bridge_get/put() would try to
redeference an ERR_PTR.
As a preliminary cleanup, add a temporary local 'next_bridge' pointer and
only copy it in dsi->out_bridge as late as possible, i.e. just before
calling pdata->host_ops->attach() which uses it (only in the exynos
driver).
Not strictly needed, but for symmetry move the clearing of dsi->out_bridge
in samsung_dsim_host_detach() to after pdata->host_ops->detach().
Acked-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20260109-drm-bridge-alloc-getput-drm_of_find_bridge-2-v2-10-8bad3ef90b9f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
of_drm_find_bridge() is deprecated. Move to its replacement
of_drm_find_and_get_bridge() which gets a bridge reference, and ensure it
is put when done.
Since the companion bridge pointer is used by many bridge funcs, putting
its reference in the remove function would be dangerous. Use .destroy to
put it on final deallocation.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260109-drm-bridge-alloc-getput-drm_of_find_bridge-2-v2-9-8bad3ef90b9f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
of_drm_find_bridge() is deprecated. Move to its replacement
of_drm_find_and_get_bridge() which gets a bridge reference, and ensure it
is put when done by using the drm_bridge::next_bridge pointer.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260109-drm-bridge-alloc-getput-drm_of_find_bridge-2-v2-8-8bad3ef90b9f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
of_drm_find_bridge() is deprecated. Move to its replacement
of_drm_find_and_get_bridge() which gets a bridge reference, and ensure it
is put when done by using the drm_bridge::next_bridge pointer.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260109-drm-bridge-alloc-getput-drm_of_find_bridge-2-v2-7-8bad3ef90b9f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
of_drm_find_bridge() is deprecated. Move to its replacement
of_drm_find_and_get_bridge() which gets a bridge reference, and ensure it
is put when done by using the drm_bridge::next_bridge pointer.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260109-drm-bridge-alloc-getput-drm_of_find_bridge-2-v2-6-8bad3ef90b9f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
of_drm_find_bridge() is deprecated. Move to its replacement
of_drm_find_and_get_bridge() which gets a bridge reference, and ensure it
is put when done by using the drm_bridge::next_bridge pointer.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260109-drm-bridge-alloc-getput-drm_of_find_bridge-2-v2-5-8bad3ef90b9f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
of_drm_find_bridge() is deprecated. Move to its replacement
of_drm_find_and_get_bridge() which gets a bridge reference, and ensure it
is put when done by using the drm_bridge::next_bridge pointer.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260109-drm-bridge-alloc-getput-drm_of_find_bridge-2-v2-4-8bad3ef90b9f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
of_drm_find_bridge() is deprecated. Move to its replacement
of_drm_find_and_get_bridge() which gets a bridge reference, and ensure it
is put when done by using the drm_bridge::next_bridge pointer.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260109-drm-bridge-alloc-getput-drm_of_find_bridge-2-v2-3-8bad3ef90b9f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
This applies the uapi change in commit ea78ec982653 ("drm/panthor:
Expose the selected coherency protocol to the UMD") to the Tyr driver as
well.
Once this is merged with drm-rust-next, this kind of change to the uapi
struct is automatically reflected in the Tyr driver's GpuInfo. [1]
Link: https://lore.kernel.org/r/aW8-oH7dtp-OTAZC@google.com [1]
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260120-tyr-pad0-coherency-v1-1-91f40e56c67a@google.com
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
|
|
If there is a plane state to destroy when doing a plane reset, destroy
it using the atmel_hlcdc_plane_destroy_state() function. So we call
__drm_atomic_helper_plane_destroy_state() and avoid code duplication.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Reviewed-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Link: https://patch.msgid.link/20251218-lcd_cleanup_mainline-v2-8-df837aba878f@microchip.com
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
|
|
Use the drmm_universal_plane_alloc() helper to simplify the code. Using
it, we no longer need to register the destroy callback for
drm_plane_funcs.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Reviewed-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Link: https://patch.msgid.link/20251218-lcd_cleanup_mainline-v2-7-df837aba878f@microchip.com
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
|
|
Use drmm_crtc_alloc_with_planes() to simplify the code. As we no longer
have to take care about cleanup, we can get rid of
atmel_hlcdc_crtc_destroy().
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Reviewed-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Link: https://patch.msgid.link/20251218-lcd_cleanup_mainline-v2-6-df837aba878f@microchip.com
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
|
|
Get rid of drm_of_find_panel_or_bridge() as it is deprecated and use
devm_drm_of_get_bridge() instead.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Reviewed-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Link: https://patch.msgid.link/20251218-lcd_cleanup_mainline-v2-5-df837aba878f@microchip.com
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
|
|
Prefer using the drm_crtc_mask() helper instead of a raw value. It
involves reordering components initialization as we need a valid crtc.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Reviewed-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Link: https://patch.msgid.link/20251218-lcd_cleanup_mainline-v2-4-df837aba878f@microchip.com
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
|
|
Simplify the code using drmm_simple_encoder_alloc to handle allocation
and initialization at once.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Reviewed-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Link: https://patch.msgid.link/20251218-lcd_cleanup_mainline-v2-3-df837aba878f@microchip.com
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
|
|
According to Documentation/admin-guide/kernel-parameters.txt, this
parameter can be used to disable kernel modesetting.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Reviewed-by: Dharma Balasubiramani <dharma.b@microchip.com>
Reviewed-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Link: https://patch.msgid.link/20251218-lcd_cleanup_mainline-v2-2-df837aba878f@microchip.com
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
|
|
Take benefit of managed device resources to reduce the risk of memory
leak and to simplify error paths.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Reviewed-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Link: https://patch.msgid.link/20251218-lcd_cleanup_mainline-v2-1-df837aba878f@microchip.com
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
|
|
Add support for both panels used in the Anbernic RG-DS. These panels
are physically identical and differ only with a single instruction
in the init sequence. The init sequence commands suggest it uses
an identical controller as the jd9365da.
Additionally, allow specifying per-panel dsi->mode_flags that can
override the default values.
Co-developed-by: Alexander Weinzerl <aweinzerl13@yahoo.com>
Signed-off-by: Alexander Weinzerl <aweinzerl13@yahoo.com>
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260113195721.151205-4-macroalpha82@gmail.com
|
|
Change instances of gpiod_set_value() to gpiod_set_value_cansleep().
Uses of gpiod_set_value() generates warnings when used in instances
where desc->gdev->can_sleep is true.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260113195721.151205-2-macroalpha82@gmail.com
|
|
The different Video Ports support different maximum resolutions.
Reject resolutions that are not supported by a specific VP.
Only the output width is checked because the hardware itself does
not have a hard output height limit.
Filter the mode that can't output by the VP/crtc.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> # Sige5
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260117020738.294825-1-andyshrk@163.com
|
|
The threaded interrupt handler on RK3588 checks HPD IRQ status before
deciding to continue with interrupt clearing and unmasking. However,
this is not really necessary, since the hard interrupt handler already
performs the very same verification before waking the handler thread.
Get rid of the redundant verification of the HPD interrupt status in the
threaded interrupt handler.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260115-dw-hdmi-qp-hpd-v1-2-e59c166eaa65@collabora.com
|
|
The threaded interrupt handler on RK3576 checks HPD IRQ status before
deciding to continue with interrupt clearing and unmasking.
This is not only redundant, since a similar verification has been
already performed by the hard IRQ handler before masking the interrupt,
but is also error prone, because it might happen that hardware clears
the status register right after the masking operation completes, and
before the threaded handler reads its value.
The consequence is that HPD IRQ gets never unmasked, which breaks
hotplug detection until reloading the driver or rebooting the system.
Drop the unnecessary verification of the HPD interrupt status from the
threaded interrupt handler.
Fixes: 36439120efbd ("drm/rockchip: dw_hdmi_qp: Add basic RK3576 HDMI output support")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260115-dw-hdmi-qp-hpd-v1-1-e59c166eaa65@collabora.com
|
|
The commit ca59e33f5a1f ("drm/atomic: add max_size check to
drm_property_replace_blob_from_id()") added a new parameter to
drm_property_replace_blob_from_id(), however commit 7436a87db99d
("drm/tests: hdmi: check the infoframes behaviour") was based on the
older tree and used the old number of params (with me failing to run
kunit tests when applying).
Fix the build error by specifying -1 as the max_size (as expected).
Fixes: 7436a87db99d ("drm/tests: hdmi: check the infoframes behaviour")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202601200306.dgF5deFm-lkp@intel.com/
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260119-fix-kunit-infoframe-v1-1-5f2f9b066594@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Add colorbar disable operation before reset chontroller, to make sure
colorbar status is clear in the DP init, so if rmmod the driver and the
previous colorbar configuration will not affect the next time insmod the
driver.
Fixes: 3c7623fb5bb6 ("drm/hisilicon/hibmc: Enable this hot plug detect of irq feature")
Signed-off-by: Baihan Li <libaihan@huawei.com>
Signed-off-by: Yongbang Shi <shiyongbang@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Tao Tian <tiantao6@hisilicon.com>
Link: https://patch.msgid.link/20251210023759.3944834-5-shiyongbang@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
When using command rmmod and insmod, there is no showing in second time
insmoding. Because DP controller won't send HPD signals, if connection
doesn't change or controller isn't reset. So add reset before unreset
in hibmc_dp_hw_init().
And also need to move the HDCP cfg after DP controller de-resets, so
that HDCP configuration takes effect.
Fixes: 3c7623fb5bb6 ("drm/hisilicon/hibmc: Enable this hot plug detect of irq feature")
Signed-off-by: Baihan Li <libaihan@huawei.com>
Signed-off-by: Yongbang Shi <shiyongbang@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Tao Tian <tiantao6@hisilicon.com>
Link: https://patch.msgid.link/20251210023759.3944834-4-shiyongbang@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
If DP is connected, check the DP BW in mode_valid_ctx() to ensure
that DP's link rate supports high-resolution data transmission.
Fixes: 0ab6ea261c1f ("drm/hisilicon/hibmc: add dp module in hibmc")
Signed-off-by: Baihan Li <libaihan@huawei.com>
Signed-off-by: Yongbang Shi <shiyongbang@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Tao Tian <tiantao6@hisilicon.com>
Link: https://patch.msgid.link/20251210023759.3944834-3-shiyongbang@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
The issue is that drm_connector_helper_detect_from_ddc() returns wrong
status when plugging or unplugging the monitor, which may cause the link
failed err.[0] Use HPD pin status in DP's detect_ctx() for real physical
monitor in/out, and implement a complete DP detection including read DPCD,
check if it's a branch device and its sink count for different situations.
[0]:
hibme-drm 0000:83:00.0: [drm] *ERROR* channel equalization failed 5 times
hibme-drm 0000:83:00.0: [drm] *ERROR* channel equalization failed 5 times
hibme-drm 0000:83:00.0: [drm] *ERROR* dp link training failed, ret: -16
hibmc-drm 0000:83:00.0: [drm] *ERROR* hibme dp mode set failed: -16
Fixes: 3c7623fb5bb6 ("drm/hisilicon/hibmc: Enable this hot plug detect of irq feature")
Signed-off-by: Baihan Li <libaihan@huawei.com>
Signed-off-by: Yongbang Shi <shiyongbang@huawei.com>
Reviewed-by: Tao Tian <tiantao6@hisilicon.com>
Link: https://patch.msgid.link/20251210023759.3944834-2-shiyongbang@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
The L2 power-on sequence and soft reset in Tyr previously relied on fixed
sleeps followed by a single register check, since polling helpers were not
available in Rust at the time.
Now that read_poll_timeout() is available, poll the relevant registers
until the hardware reports readiness or a timeout is reached.
This avoids unnecessary delays on start-up.
Signed-off-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260119202645.362457-1-deborah.brouwer@collabora.com
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
|
|
The `..IRQ..` register is printed here. Not the `..INT..` one.
Correct this.
Cc: stable@vger.kernel.org
Fixes: cf4fd52e3236 ("rust: drm: Introduce the Tyr driver for Arm Mali GPUs")
Link: https://lore.kernel.org/rust-for-linux/A04F0357-896E-4ACC-BC0E-DEE8608CE518@collabora.com/
Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://patch.msgid.link/20260119070838.3219739-1-dirk.behme@de.bosch.com
[aliceryhl: update commit message prefix]
[aliceryhl: add cc stable as per Miguel's suggestion]
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
|
|
During initialization of DRM buddy memory manager at drm_buddy_init,
mm->free_trees array is allocated for both clear and dirty RB trees.
During cleanup happening at drm_buddy_fini it is never freed, leading to
following memory leaks observed on xe module load & unload cycles:
kmemleak_alloc+0x4a/0x90
__kmalloc_cache_noprof+0x488/0x800
drm_buddy_init+0xc2/0x330 [drm_buddy]
__xe_ttm_vram_mgr_init+0xc3/0x190 [xe]
xe_ttm_stolen_mgr_init+0xf5/0x9d0 [xe]
xe_device_probe+0x326/0x9e0 [xe]
xe_pci_probe+0x39a/0x610 [xe]
local_pci_probe+0x47/0xb0
pci_device_probe+0xf3/0x260
really_probe+0xf1/0x3c0
__driver_probe_device+0x8c/0x180
driver_probe_device+0x24/0xd0
__driver_attach+0x10f/0x220
bus_for_each_dev+0x7f/0xe0
driver_attach+0x1e/0x30
bus_add_driver+0x151/0x290
Deallocate array for free trees when cleaning up buddy memory manager
in the same way as if going through out_free_tree label.
Fixes: d4cd665c98c1 ("drm/buddy: Separate clear and dirty free block trees")
Signed-off-by: Michał Grzelak <michal.grzelak@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Link: https://patch.msgid.link/20251208102714.4008260-2-michal.grzelak@intel.com
|
|
Upstream is on rc5, we're still on rc1. No luck in hoping for a
fast-forward, time to backmerge!
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
|
|
Gate the use of unsupported hardware behind a new module parameter
(exp_hw_support).
Reviewed-by: Alessio Belle <alessio.belle@imgtec.com>
Link: https://patch.msgid.link/20260113-device-support-info-v1-6-91e5db7f7294@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
|
|
This is a nice self-contained function to serve as the basis of our first
KUnit tests.
Reviewed-by: Alessio Belle <alessio.belle@imgtec.com>
Link: https://patch.msgid.link/20260113-device-support-info-v1-5-91e5db7f7294@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
|
|
The "gpuid" module parameter is used to override the gpuid read from a
hardware register and is useful for testing the loading of different
firmware (including processing of the firmware header) without having
the hardware to hand.
Signed-off-by: Alexandru Dadu <alexandru.dadu@imgtec.com>
Reviewed-by: Alessio Belle <alessio.belle@imgtec.com>
Link: https://patch.msgid.link/20260113-device-support-info-v1-4-91e5db7f7294@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
|
|
We have a module parameter to set the initial group mask before debugfs is
available for any specific device, but don't currently use that value when
initialising devices.
Use the module parameter value as the initial value for group_mask.
Reviewed-by: Alessio Belle <alessio.belle@imgtec.com>
Link: https://patch.msgid.link/20260113-device-support-info-v1-3-91e5db7f7294@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
|
|
This value can come from two places: a module parameter or a debugfs file.
In both cases, validate it early to provide feedback to userspace at the
time the value is set instead of deferring until the value is used.
Reviewed-by: Alessio Belle <alessio.belle@imgtec.com>
Link: https://patch.msgid.link/20260113-device-support-info-v1-2-91e5db7f7294@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
|
|
We had a whole load of bloaty infrastructure to deal with module parameters
in a way that's wholly unnecessary. Strip it all back to basics to make
adding new parameters less of a headache.
Reviewed-by: Alessio Belle <alessio.belle@imgtec.com>
Link: https://patch.msgid.link/20260113-device-support-info-v1-1-91e5db7f7294@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
|
|
Possibility of no FW trace available after update in the fw_trace_mask due
to asynchronous mode of command consumption in the FW.
To ensure FW trace is available after update, wait for FW trace log update
command completion from the FW.
Fixes: cc1aeedb98ad ("drm/imagination: Implement firmware infrastructure and META FW support")
Signed-off-by: Brajesh Gupta <brajesh.gupta@imgtec.com>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Link: https://patch.msgid.link/20260108040936.129769-1-brajesh.gupta@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
|
|
Having debugfs files for the InfoFrames that are not supported by the
driver is confusing, stop registering those in the debugfs.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260107-limit-infoframes-2-v4-10-213d0d3bd490@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
The rest of the DRM framework uses presence of the callbacks to check if
the particular infoframe is supported. Register HDMI callbacks
dynamically, basing on the corresponding drm_bridge ops.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260107-limit-infoframes-2-v4-9-213d0d3bd490@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
There is little point in generating InfoFrames which are not supported
by the driver. Skip generating the unsupported InfoFrames, making sure
that the kernel never tries to write the unsupported frame. As there are
no remaining usecases, change write_infoframe / clear_infoframe helpers
return an error if the corresponding callback is NULL.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260107-limit-infoframes-2-v4-8-213d0d3bd490@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Updating the InfoFrame if it can not be sent over the wire makes no
sense. Change drm_atomic_helper_connector_hdmi_update_audio_infoframe()
and drm_atomic_helper_connector_hdmi_clear_audio_infoframe() to return
an error if Audio InfoFrame callbacks are not implemented.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260107-limit-infoframes-2-v4-7-213d0d3bd490@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Havign a single set of InfoFrame callbacks doesn't provide enough
information to the DRM framework about the InfoFrame types that are
actually supported. Also it's not really future-proof: it provides a way
to program only a single Vendor-Specific frame, however we might need to
support multiple VSIs at the same time (e.g. HDMI vs HDMI Forum
VSIs).
Provide separate sets of callbacks, one per the InfoFrame type.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260107-limit-infoframes-2-v4-6-213d0d3bd490@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Having only a single set of callbacks, hdmi_clear_infoframe and
hdmi_write_infoframe, bridge drivers don't have an easy way to signal to
the DRM framework, which InfoFrames are actually supported by the
hardware and by the driver and which are not. Also, it makes it
extremely easy for HDMI bridge drivers to skip implementing the
seemingly required InfoFrames (e.g. HDMI VSI). Last, but not least,
those callbacks take a single 'type' parameter, which makes it
impossible to implement support for multiple VSIs (which will be
required once we start working on HDMI Forum VSI).
Split the callbacks into a per-InfoFrame-kind pairs, letting the bridge
drivers actually signal supported features. The implementation follows
the overall drm_bridge design, where the bridge has a single
drm_bridge_funcs implementation and signals, which functions are to be
called using the drm_bridge->ops flags.
The AVI and HDMI VSI are assumed to be required for a normal HDMI
operation (with the drivers getting a drm_warn_once() stub
implementation if one is missing). The Audio InfoFrame is handled by the
existing DRM_BRIDGE_OP_HDMI_AUDIO, while the SPD and HDR DRM InfoFrames
got new drm_bridge_ops values.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260107-limit-infoframes-2-v4-5-213d0d3bd490@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
We already require both hdmi_write_infoframe and hdmi_clear_infoframe
for bridges implementing DRM_BRIDGE_OP_HDMI. It makes sense to require
the clear_infoframes callback for HDMI connectors utilizing
drmm_connector_hdmi_init().
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260107-limit-infoframes-2-v4-4-213d0d3bd490@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
