| Age | Commit message (Collapse) | Author |
|---|
|
Introduce an rw-semaphore to serialize migration to device if
it's likely that migration races with another device migration
of the same CPU address space range.
This is a temporary fix to attempt to mitigate a livelock that
might happen if many devices try to migrate a range at the same
time, and it affects only devices using the xe driver.
A longer term fix is probably improvements in the core mm
migration layer.
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251219113320.183860-25-thomas.hellstrom@linux.intel.com
|
|
Support source interconnect migration by using the copy_to_ram() op
of the source device private pages.
Source interconnect migration is required to flush the L2 cache of
the source device, which among other things is a requirement for
correct global atomic operation. It also enables the source GPU to
potentially decompress any compressed content which is not
understood by peers, and finally for the PCIe case, it's expected
that writes over PCIe will be faster than reads.
The implementation can probably be improved by coalescing subregions
with the same source.
v5:
- Update waiting for the pre_migrate_fence and comments around that,
previously in another patch. (Himal).
- Actually select device private pages to migrate when
source_peer_migrates is true.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> # For merging through drm-xe.
Link: https://patch.msgid.link/20251219113320.183860-24-thomas.hellstrom@linux.intel.com
|
|
Support destination migration over interconnect when migrating from
device-private pages with the same dev_pagemap owner.
Since we now also collect device-private pages to migrate,
also abort migration if the range to migrate is already
fully populated with pages from the desired pagemap.
Finally return -EBUSY from drm_pagemap_populate_mm()
if the migration can't be completed without first migrating all
pages in the range to system. It is expected that the caller
will perform that before retrying the call to
drm_pagemap_populate_mm().
v3:
- Fix a bug where the p2p dma-address was never used.
- Postpone enabling destination interconnect migration,
since xe devices require source interconnect migration to
ensure the source L2 cache is flushed at migration time.
- Update the drm_pagemap_migrate_to_devmem() interface to
pass migration details.
v4:
- Define XE_INTERCONNECT_P2P unconditionally (CI)
- Include a missing header (CI)
v5:
- Use page order increments where possible (Matt Brost).
- Fix a negated value of can_migrate_same_pagemap.
- Move removal of some dead code to a separate patch (Matt Brost).
- Remove an unnecessary zdd get() and put() (Matt Brost).
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> # For merging through drm-xe.
Link: https://patch.msgid.link/20251219113320.183860-23-thomas.hellstrom@linux.intel.com
|
|
Use drm_gpusvm_scan_mm() to avoid unnecessarily calling into
drm_pagemap_populate_mm();
v3:
- New patch.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patch.msgid.link/20251219113320.183860-22-thomas.hellstrom@linux.intel.com
|
|
With multi-device we are much more likely to have multiple
drm-gpusvm ranges pointing to the same struct mm range.
To avoid calling into drm_pagemap_populate_mm(), which is always
very costly, introduce a much less costly drm_gpusvm function,
drm_gpusvm_scan_mm() to scan the current migration state.
The device fault-handler and prefetcher can use this function to
determine whether migration is really necessary.
There are a couple of performance improvements that can be done
for this function if it turns out to be too costly. Those are
documented in the code.
v3:
- New patch.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> # For merging through drm-xe.
Link: https://patch.msgid.link/20251219113320.183860-21-thomas.hellstrom@linux.intel.com
|
|
Use the dev_pagemap->owner field wherever possible, simplifying
the code slightly.
v3: New patch
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> # For merging through drm-xe.
Link: https://patch.msgid.link/20251219113320.183860-20-thomas.hellstrom@linux.intel.com
|
|
As an aid to understanding the lifetime of the drm_pagemaps used
by the xe driver, document how the xe driver keeps the
drm_pagemap references.
v3:
- Fix formatting (Matt Brost)
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251219113320.183860-19-thomas.hellstrom@linux.intel.com
|
|
Add debug printouts that are valueable for pagemap prefetch,
migration and page collection.
v2:
- Add additional debug prinouts around migration and page collection.
- Require CONFIG_DRM_XE_DEBUG_VM.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com> #v1
Link: https://patch.msgid.link/20251219113320.183860-18-thomas.hellstrom@linux.intel.com
|
|
Mimic the dma-buf method using dma_[map|unmap]_resource to map
for pcie-p2p dma.
There's an ongoing area of work upstream to sort out how this best
should be done. One method proposed is to add an additional
pci_p2p_dma_pagemap aliasing the device_private pagemap and use
the corresponding pci_p2p_dma_pagemap page as input for
dma_map_page(). However, that would incur double the amount of
memory and latency to set up the drm_pagemap and given the huge
amount of memory present on modern GPUs, that would really not work.
Hence the simple approach used in this patch.
v2:
- Simplify xe_page_to_pcie(). (Matt Brost)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251219113320.183860-17-thomas.hellstrom@linux.intel.com
|
|
placement for svm
Use device file descriptors and regions to represent pagemaps on
foreign or local devices.
The underlying files are type-checked at madvise time, and
references are kept on the drm_pagemap as long as there is are
madvises pointing to it.
Extend the madvise preferred_location UAPI to support the region
instance to identify the foreign placement.
v2:
- Improve UAPI documentation. (Matt Brost)
- Sanitize preferred_mem_loc.region_instance madvise. (Matt Brost)
- Clarify madvise drm_pagemap vs xe_pagemap refcounting. (Matt Brost)
- Don't allow a foreign drm_pagemap madvise without a fast
interconnect.
v3:
- Add a comment about reference-counting in xe_devmem_open() and
remove the reference-count get-and-put. (Matt Brost)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251219113320.183860-16-thomas.hellstrom@linux.intel.com
|
|
Simplify madvise_preferred_mem_loc by removing repetitive patterns
in favour of local variables.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251219113320.183860-15-thomas.hellstrom@linux.intel.com
|
|
Honor the drm_pagemap vma attribute when migrating SVM pages.
Ensure that when the desired placement is validated as device
memory, that we also check that the requested drm_pagemap is
consistent with the current.
v2:
- Initialize a struct drm_pagemap pointer to NULL that could
otherwise be dereferenced uninitialized. (CI)
- Remove a redundant assignment (Matt Brost)
- Slightly improved commit message (Matt Brost)
- Extended drm_pagemap validation.
v3:
- Fix a compilation error if CONFIG_DRM_GPUSVM is not enabled.
(kernel test robot <lkp@intel.com>)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patch.msgid.link/20251219113320.183860-14-thomas.hellstrom@linux.intel.com
|
|
As a consequence, struct xe_vma_mem_attr() can't simply be assigned
or freed without taking the reference count of individual members
into account. Also add helpers to do that.
v2:
- Move some calls to xe_vma_mem_attr_fini() to xe_vma_free(). (Matt Brost)
v3:
- Rebase.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com> #v2
Link: https://patch.msgid.link/20251219113320.183860-13-thomas.hellstrom@linux.intel.com
|
|
Register a driver-wide owner list, provide a callback to identify
fast interconnects and use the drm_pagemap_util helper to allocate
or reuse a suitable owner struct. For now we consider pagemaps on
different tiles on the same device as having fast interconnect and
thus the same owner.
v2:
- Fix up the error onion unwind in xe_pagemap_create(). (Matt Brost)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251219113320.183860-12-thomas.hellstrom@linux.intel.com
|
|
interconnected gpus
The hmm_range_fault() and the migration helpers currently need a common
"owner" to identify pagemaps and clients with fast interconnect.
Add a drm_pagemap utility to setup such owners by registering
drm_pagemaps, in a registry, and for each new drm_pagemap,
query which existing drm_pagemaps have fast interconnects with the new
drm_pagemap.
The "owner" scheme is limited in that it is static at drm_pagemap creation.
Ideally one would want the owner to be adjusted at run-time, but that
requires changes to hmm. If the proposed scheme becomes too limited,
we need to revisit.
v2:
- Improve documentation of DRM_PAGEMAP_OWNER_LIST_DEFINE(). (Matt Brost)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> # For merging through drm-xe.
Link: https://patch.msgid.link/20251219113320.183860-11-thomas.hellstrom@linux.intel.com
|
|
With the drm_pagemap_init() interface, drm_pagemap_create() is not
used anymore.
v2:
- Slightly more verbose commit message. (Matt Brost)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> # For merging through drm-xe.
Link: https://patch.msgid.link/20251219113320.183860-10-thomas.hellstrom@linux.intel.com
|
|
Define a struct xe_pagemap that embeds all pagemap-related
data used by xekmd, and use the drm_pagemap cache- and
shrinker to manage lifetime.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251219113320.183860-9-thomas.hellstrom@linux.intel.com
|
|
Pagemaps are costly to set up and tear down, and they consume a lot
of system memory for the struct pages. Ideally they should be
created only when needed.
Add a caching mechanism to allow doing just that: Create the drm_pagemaps
when needed for migration. Keep them around to avoid destruction and
re-creation latencies and destroy inactive/unused drm_pagemaps on memory
pressure using a shrinker.
Only add the helper functions. They will be hooked up to the xe driver
in the upcoming patch.
v2:
- Add lockdep checking for drm_pagemap_put(). (Matt Brost)
- Add a copyright notice. (Matt Brost)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> # For merging through drm-xe.
Link: https://patch.msgid.link/20251219113320.183860-8-thomas.hellstrom@linux.intel.com
|
|
If a device holds a reference on a foregin device's drm_pagemap,
and a device unbind is executed on the foreign device,
Typically that foreign device would evict its device-private
pages and then continue its device-managed cleanup eventually
releasing its drm device and possibly allow for module unload.
However, since we're still holding a reference on a drm_pagemap,
when that reference is released and the provider module is
unloaded we'd execute out of undefined memory.
Therefore keep a reference on the provider device and module until
the last drm_pagemap reference is gone.
Note that in theory, the drm_gpusvm_helper module may be unloaded
as soon as the final module_put() of the provider driver module is
executed, so we need to add a module_exit() function that waits
for the work item executing the module_put() has completed.
v2:
- Better commit message (Matt Brost)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> # For merging through drm-xe.
Link: https://patch.msgid.link/20251219113320.183860-7-thomas.hellstrom@linux.intel.com
|
|
To be able to keep track of drm_pagemap usage, add a refcounted
backpointer to struct drm_pagemap_zdd. This will keep the drm_pagemap
reference count from dropping to zero as long as there are drm_pagemap
pages present in a CPU address space.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> # For merging through drm-xe.
Link: https://patch.msgid.link/20251219113320.183860-6-thomas.hellstrom@linux.intel.com
|
|
With the end goal of being able to free unused pagemaps
and allocate them on demand, add a refcount to struct drm_pagemap,
remove the xe embedded drm_pagemap, allocating and freeing it
explicitly.
v2:
- Make the drm_pagemap pointer in drm_gpusvm_pages reference-counted.
v3:
- Call drm_pagemap_get() before drm_pagemap_put() in drm_gpusvm_pages
(Himal Prasad Ghimiray)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com> #v1
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> # For merging through drm-xe.
Link: https://patch.msgid.link/20251219113320.183860-5-thomas.hellstrom@linux.intel.com
|
|
In situations where no system memory is migrated to devmem, and in
upcoming patches where another GPU is performing the migration to
the newly allocated devmem buffer, there is nothing to ensure any
ongoing clear to the devmem allocation or async eviction from the
devmem allocation is complete.
Address that by passing a struct dma_fence down to the copy
functions, and ensure it is waited for before migration is marked
complete.
v3:
- New patch.
v4:
- Update the logic used for determining when to wait for the
pre_migrate_fence.
- Update the logic used for determining when to warn for the
pre_migrate_fence since the scheduler fences apparently
can signal out-of-order.
v5:
- Fix a UAF (CI)
- Remove references to source P2P migration (Himal)
- Put the pre_migrate_fence after migration.
v6:
- Pipeline the pre_migrate_fence dependency (Matt Brost)
Fixes: c5b3eb5a906c ("drm/xe: Add GPUSVM device memory copy vfunc functions")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.15+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> # For merging through drm-xe.
Link: https://patch.msgid.link/20251219113320.183860-4-thomas.hellstrom@linux.intel.com
|
|
The page pointer can't be NULL.
v5:
- New patch. (Matt Brost)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> # For merging through drm-xe.
Link: https://patch.msgid.link/20251219113320.183860-3-thomas.hellstrom@linux.intel.com
|
|
Avoid spamming the log with drm_info(). Use drm_dbg() instead.
Fixes: cc795e041034 ("drm/xe/svm: Make xe_svm_range_needs_migrate_to_vram() public")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: <stable@vger.kernel.org> # v6.17+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patch.msgid.link/20251219113320.183860-2-thomas.hellstrom@linux.intel.com
|
|
Debugfs files are added to allow a user to provide a comma-separated list
of values to assign to each group for each VF.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251218223846.1146344-26-daniele.ceraolospurio@intel.com
|
|
The KLV to set the preemption timeout for each groups works the exact
same way as the one for the exec quantums, so we add similar functions.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251218223846.1146344-25-daniele.ceraolospurio@intel.com
|
|
The GuC has a new dedicated KLV to set the EQs for the groups. The GuC
always sets the EQs for all the groups (even the ones not enabled). If
we provide fewer values than the max number of groups (8), the GuC will
set the remaining ones to 0 (infinity).
Note that the new KLV can be used even when groups are disabled (as the
GuC always consider group0 to be active), so we can use it when encoding
the SRIOV config.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251218223846.1146344-24-daniele.ceraolospurio@intel.com
|
|
Each scheduler group can be independently configured with its own exec
quantum and preemption timeouts. The existing KLVs to configure those
parameters will apply the value to all groups (even if they're not
enabled at the moment).
When scheduler groups are disabled, the GuC uses the values from Group 0.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251218223846.1146344-23-daniele.ceraolospurio@intel.com
|
|
Under a new subfolder, an entry is created for each group to list the
engines assigned to them. We create enough entries for each possible
group, with the disabled groups just returning an empty list.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251218223846.1146344-22-daniele.ceraolospurio@intel.com
|
|
Reading the debugfs file lists the available configurations by name.
Writing the name of a configuration to the file will enable it.
Note that while this debugfs is PF-only, follow up patches will add some
debugfs files that are applicable to VF as well, so the function accepts
a vfid parameter to be ready for that.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251218223846.1146344-21-daniele.ceraolospurio@intel.com
|
|
VF can check if PF has enabled scheduler groups with a dedicated KLV
query. If scheduler groups are enabled, MLRC queue registrations are
forbidden.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251218223846.1146344-20-daniele.ceraolospurio@intel.com
|
|
Since engines in the same class can be divided across multiple groups,
the GuC does not allow scheduler groups to be active if there are
multi-lrc contexts. This means that:
1) if a MLRC context is registered when we enable scheduler groups, the
GuC will silently ignore the configuration
2) if a MLRC context is registered after scheduler groups are enabled,
the GuC will disable the groups and generate an adverse event.
The expectation is that the admin will ensure that all apps that use
MLRC on PF have been terminated before scheduler groups are created. A
check is added anyway to make sure we don't still have contexts waiting
to be cleaned up laying around. A check is also added at queue creation
time to block MLRC queue creation if scheduler groups have been enabled.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251218223846.1146344-19-daniele.ceraolospurio@intel.com
|
|
Scheduler groups are enabled by sending a specific policy configuration
KLV to the GuC. We don't allow changing this policy if there are VF
active, since the expectation is that the VF will only check if the
feature is enabled during driver initialization.
While the GuC interface supports a maximum of 8 groups, the actual
number of groups that can be enabled can be lower than that and
can be different on different devices. For now, all devices support up
to 2 groups, so we check that we do not have more groups than that.
The functions added by this patch will be used by sysfs/debugfs, coming
in follow up patches.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251218223846.1146344-18-daniele.ceraolospurio@intel.com
|
|
Scheduler groups (a.k.a. Engine Groups Scheduling, or EGS) is a GuC
feature that allows the driver to define groups of engines that are
independently scheduled across VFs, which allows different VFs to be
active on the HW at the same time on different groups. The feature is
available for BMG and newer HW starting on GuC 70.53.0, but some
required fixes have been added to GuC 70.55.1.
This is intended for specific scenarios where the admin knows that the
VFs are not going to fully utilize the HW and therefore assigning all of
it to a single VF would lead to part of it being permanently idle.
We do not allow the admin to decide how to divide the engines across
groups, but we instead support specific configurations that are designed
for specific use-cases. During PF initialization we detect which
configurations are possible on a given GT and create the relevant
groups. Since the GuC expect a mask for each class for each group, that
is what we save when we init the configs.
Right now we only have one use-case on the media GT. If the VFs are
running a frame render + encoding at a not-too-high resolution (e.g.
1080@30fps) the render can produce frames faster than the video engine
can encode them, which means that the maximum number of parallel VFs is
limited by the VCS bandwidth. Since our products can have multiple VCS
engines, allowing multiple VFs to be active on the different VCS engines
at the same time allows us to run more parallel VFs on the same HW.
Given that engines in the same media slice share some resources (e.g.
SFC), we assign each media slice to a different scheduling group. We
refer to this configuration as "media_slices", given that each slice
gets its own group. Since upcoming products have a different number of
video engines per-slice, for now we limit the media_slices mode to BMG,
but we expect to add support for newer HW soon.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251218223846.1146344-17-daniele.ceraolospurio@intel.com
|
|
Some upcoming KLVs are sized based on the engine counts, so we need
those defines to be moved to a separate file to include them from
guc_klv_abi.h (which is already included by guc_fwif.h).
Instead of moving just the engine-related defines, it is cleaner to
move all scheduler-related defines (i.e., everything engine or context
related). Note that the legacy GuC defines have not been moved and have
instead been dropped because Xe doesn't support any GuC old enough to
still use them.
While at it, struct guc_ctxt_registration_info has been moved to
guc_submit.c since it doesn't come from the GuC specs (we added it to
make things simpler in our code).
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251218223846.1146344-16-daniele.ceraolospurio@intel.com
|
|
Follow up patches will need the engine masks for VCS and VECS engines.
Since we already have a macro for the CCS engines, just extend the same
approach to all classes.
To avoid confusion with the XE_HW_ENGINE_*_MASK masks, the new macros
use the _INSTANCES suffix instead. For consistency, rename CCS_MASK to
CCS_INSTANCES as well.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251218223846.1146344-15-daniele.ceraolospurio@intel.com
|
|
C-String literals were added in Rust 1.77. Replace instances of
`kernel::c_str!` with C-String literals where possible.
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://patch.msgid.link/20251222-cstr-tyr-v1-1-d88ff1a54ae9@gmail.com
[ Change commit subject prefix to 'drm: tyr:'. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
C-String literals were added in Rust 1.77. Replace instances of
`kernel::c_str!` with C-String literals where possible.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://patch.msgid.link/20251222-cstr-nova-v1-1-0e2353d5debe@gmail.com
[ Use 'nova' commit subject prefix; use kernel vertical import style.
- Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
functions
There is no real reason to include drm_colorop.h from drm_atomic.h, as
drm_atomic_get_{old,new}_colorop_state() have no real reason to be
static inline.
Convert the static inlines to proper functions, and drop the include to
reduce the include dependencies and improve data hiding.
v2: Fix vkms build failures (Alex)
Fixes: cfc27680ee20 ("drm/colorop: Introduce new drm_colorop mode object")
Cc: Simon Ser <contact@emersion.fr>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Daniel Stone <daniels@collabora.com>
Cc: Melissa Wen <mwen@igalia.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Alex Hung <alex.hung@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Link: https://patch.msgid.link/20251219114939.1069851-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
With the i915 switch to generic fault injection, display no longer needs
the compat i915_utils.h. Remove it, along with a few includes.
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Link: https://patch.msgid.link/20251219104036.855258-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The i915 core initial plane handling doesn't actually need struct
intel_display for anything. Switch to i915 specific data structures in
i915 core code.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/58d7605a16b360080921ff2af7120b6da2eb042d.1765812266.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The initial plane parent interface ->alloc_obj hook no longer needs the
crtc for anything. Pass struct drm_device instead.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/7a40381be6d98dc0916a5447be5dd6cba86cfd0a.1765812266.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
->setup
The initial plane parent interface ->setup hook no longer needs the crtc
for anything. Pass the struct drm_plane_state instead.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/c3db101ef5fd13c56cb3a9329adecf521a807abc.1765812266.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Deduplicate more of the identical parts of i915 and xe initial plane
setup. This lets us reduce the core dependency on display internals.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/1a2abbceedb9e7d03f262c44cd54a24556ef6b61.1765812266.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Move the modifier checks into common code to deduplicate.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/3c62ad48595aa2306219b1d6a215cf7680a67da2.1765812266.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Move intel_reuse_initial_plane_obj() into common display code, and split
the ->find_obj hook into ->alloc_obj and ->setup hooks.
Return the struct drm_gem_object from ->alloc_obj in preparation for
moving more things to display.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/c71011dbb11afaa5c4da30aa2627833374300d63.1765812266.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Initialize fb in the same level as the other code path.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/47d3272cff13dc8f5d7323c32bfb3cc34c0c977d.1765812266.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Initialize fb and vma in the same level as the other code path.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/96985a18593408f07fba131cf49ca0f97bf8fb93.1765812266.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
i915 and xe
Move some easy common parts to display. Initially, the
intel_find_initial_plane_obj() error path seems silly, but it'll be more
helpful this way for later changes.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/950d308172443d5bae975aa1ab72111720134219.1765812266.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Move the common code to display. Retain empty xe_plane_config_fini() for
now, in case it's needed in the future.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/14322386cdb1a0f4f6c7ff74a5a9696ea0ff84bf.1765812266.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
