| Age | Commit message (Collapse) | Author |
|---|
|
If there is a flood of faults then the MMU can become saturated while it
waits for the kernel to process the first fault and resume it, so that
the GMU becomes blocked. This is mainly a problem when the kernel reads
the state of the GPU for a devcoredump, because this takes a while. If
we timeout waiting for the GMU, check if this has happened and retry
after we're finished.
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/664685/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
|
|
If the rootfs have a legacy A200 firmware, currently the driver will
complain each time the hw is reinited (which can happen a lot). E.g.
with GL testsuite the hw is reinited after each test, spamming the
console.
Make sure that the message is printed only once: when we detect the
firmware that doesn't support protection.
Fixes: 302295070d3c ("drm/msm/a2xx: support loading legacy (iMX) firmware")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/688098/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
|
|
The crashstate_get_bos() function allocates memory for `state->bos`
using kcalloc(), but the vmbind path does not check for allocation
failure before dereferencing it in the following drm_gpuvm_for_each_va()
loop. This could lead to a NULL pointer dereference if memory allocation
fails.
Fix this by wrapping the drm_gpuvm_for_each_va() loop with a NULL check
on state->bos, similar to the safety check in the non-vmbind path.
Fixes: af9aa6f316b3d ("drm/msm: Crashdump support for sparse")
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Patchwork: https://patchwork.freedesktop.org/patch/687556/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
|
|
crashstate_get_vm_logs() did not check the return value of
kmalloc_array(). In low-memory situations, kmalloc_array() may return
NULL, leading to a NULL pointer dereference when the function later
accesses state->vm_logs.
Fix this by checking the return value of kmalloc_array() and setting
state->nr_vm_logs to 0 if allocation fails.
Fixes: 9edc52967cc7 ("drm/msm: Add VM logging for VM_BIND updates")
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Patchwork: https://patchwork.freedesktop.org/patch/687555/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
|
|
Make sure to drop the references taken to the component devices by
of_find_device_by_node() during probe on probe failure (e.g. probe
deferral) and on driver unbind.
Fixes: 453c3364632a ("drm/mediatek: Add ovl_adaptor support for MT8195")
Cc: stable@vger.kernel.org # 6.4
Cc: Nancy.Lin <nancy.lin@mediatek.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250923152340.18234-6-johan@kernel.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Make sure to drop the reference taken to each component device during
probe on probe failure (e.g. probe deferral) and on driver unbind.
Fixes: 6ea6f8276725 ("drm/mediatek: Use correct device pointer to get CMDQ client register")
Cc: stable@vger.kernel.org # 5.12
Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250923152340.18234-4-johan@kernel.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
The Mediatek DRM driver allocates private data for components without a
platform driver but as the lifetime is tied to each component device,
the memory is never freed.
Tie the allocation lifetime to the DRM platform device so that the
memory is released on probe failure (e.g. probe deferral) and when the
driver is unbound.
Fixes: c0d36de868a6 ("drm/mediatek: Move clk info from struct mtk_ddp_comp to sub driver private data")
Cc: stable@vger.kernel.org # 5.12
Cc: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250923152340.18234-3-johan@kernel.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Make sure to unmap and release the component iomap and clock on probe
failure (e.g. probe deferral) and on driver unbind.
Note that unlike of_iomap(), devm_of_iomap() also checks whether the
region is already mapped.
Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Cc: stable@vger.kernel.org # 4.7
Cc: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250923152340.18234-2-johan@kernel.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
The i2c adapter for ddc might not be available yet due to e.g. its
module not yet being loaded. To handle that defer probing rather then
returning a fatal error when probing.
Signed-off-by: Sjoerd Simons <sjoerd@collabora.com>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Implement the Automated Built-In Self-Test ABIST functionality
provided by the HDMIv2 IP and expose it through the "hdmi_abist"
debugfs file.
Write "1" to this file to activate ABIST, or "0" to deactivate.
The ABIST functionality can be used to validate that the HDMI
Transmitter itself works and that can output a valid image to
the HDMI Display that is connected.
This is especially useful when trying to rule out any possible
issue that is related to the display pipeline, as the HDMI Tx
is always the last component; this means that HDMI ABIST can be
used even without prior display controller pipeline configuration.
The expected output is a 100% color bar (rainbow) test pattern.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20251023-mediatek-drm-hdmi-v2-v11-10-7873ec4a1edf@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Add support for the newer HDMI-TX (Encoder) v2 and DDC v2 IPs
found in MediaTek's MT8195, MT8188 SoC and their variants, and
including support for display modes up to 4k60 and for HDMI
Audio, as per the HDMI 2.0 spec.
HDCP and CEC functionalities are also supported by this hardware,
but are not included in this commit and that also poses a slight
difference between the V2 and V1 controllers in how they handle
Hotplug Detection (HPD).
While the v1 controller was using the CEC controller to check
HDMI cable connection and disconnection, in this driver the v2
one does not.
This is due to the fact that on parts with v2 designs, like the
MT8195 SoC, there is one CEC controller shared between the HDMI
Transmitter (HDMI-TX) and Receiver (HDMI-RX): before eventually
adding support to use the CEC HW to wake up the HDMI controllers
it is necessary to have support for one TX, one RX *and* for both
at the same time.
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20251023-mediatek-drm-hdmi-v2-v11-9-7873ec4a1edf@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
ddc_v2
ddc_v2
|
|
Add an interlace_allowed bool member to struct mtk_hdmi_ver_conf
which will be used to signal whether interlaced modes are supported
by the bridge (in our case, the HDMI IP), and enable it for HDMIv2.
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20251023-mediatek-drm-hdmi-v2-v11-8-7873ec4a1edf@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
In preparation for adding the HDMI TX v2 driver, and to allow
a future modernization of the HDMI v1 one, perform changes
that enable the usage of the HDMI Helpers provided by DRM.
Check if the HDMI driver provides the function pointers to
hdmi_{clear,write}_infoframe used by the HDMI Helper API and,
if present, add DRM_BRIDGE_OP_HDMI to the drm_bridge ops,
enabling the drm API to register the bridge as HDMI and to use
the HDMI Helper functions.
If the hdmi_{write,clear}_infoframe pointers are not assigned,
vendor and product strings and HDMI helpers will not be used,
hence this commit brings no functional changes to drivers that
have not been refactored to use the new helpers.
This also means that, in the current state, there is effectively
no functional change to mtk_hdmi and its other components.
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20251023-mediatek-drm-hdmi-v2-v11-7-7873ec4a1edf@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
In preparation for adding the new HDMI TX v2 IP driver, assign the
pointer to the DDC adapter to struct drm_bridge during probe.
This commit brings no functional changes.
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20251023-mediatek-drm-hdmi-v2-v11-6-7873ec4a1edf@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
In preparation for adding a new driver for HDMIv2, for which CEC
is not strictly required, change the of_get_compatible_child()
failure error to -EOPNOTSUPP to be able to differentiate between
error conditions in mtk_hdmi_dt_parse_pdata().
In that case, if -EOPNOTSUPP is returned, this driver will print
an informative message saying that CEC support is unavailable,
as the devicetree node for that was not found, but after that,
function mtk_hdmi_dt_parse_pdata() will not return error to
the caller.
This will not change functionality of the mtk_hdmi (v1) driver
as that is still checking whether CEC is present and, if not,
will fail probing with an error saying that CEC is required
by HDMIv1.
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20251023-mediatek-drm-hdmi-v2-v11-5-7873ec4a1edf@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
In preparation for adding a new driver for the HDMI TX v2 IP,
split out the functions that will be common between the already
present mtk_hdmi (v1) driver and the new one.
Since the probe flow for both drivers is 90% similar, add a common
probe function that will be called from each driver's .probe()
callback, avoiding lots of code duplication.
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20251023-mediatek-drm-hdmi-v2-v11-4-7873ec4a1edf@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
In preparation for adding a driver for the HDMIv2 IP and before
moving the common bits out of this driver, add a new structure
`mtk_hdmi_ver_conf`, holding pointers to HDMI IP version specific
drm_bridge_funcs, hdmi_codec_ops and clock array used for probe,
and nest it into the mtk_hdmi_conf platform data structure.
While at it, also convert all of the direct users of
mtk_hdmi_bridge_funcs, mtk_hdmi_audio_codec_ops, mtk_hdmi_clk_names
to use pointers from the ver_conf platform data.
In order to do so, it was also necessary to fill a new version 1
specific const `mtk_hdmi_v1_ver_conf` and assign it to all of the
currently supported compatibles for this driver.
This commit brings no functional change.
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20251023-mediatek-drm-hdmi-v2-v11-3-7873ec4a1edf@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
In preparation for splitting common bits of this driver and for
introducing a new version of the MediaTek HDMI Encoder IP, improve
the flexibility of function mtk_hdmi_get_all_clk() by adding a
pointer to the clock names array and size of it to its parameters.
Also change the array of struct clock pointers in the mtk_hdmi
structure to be dynamically allocated, and allocate it in probe.
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20251023-mediatek-drm-hdmi-v2-v11-2-7873ec4a1edf@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
In mtk_hdmi driver, when the CEC device parsing logic was moved from
mtk_hdmi_dt_parse_pdata function to the new mtk_hdmi_get_cec_dev sub
function, the call to mtk_hdmi_get_all_clk was kept in both functions,
whereas it was only called once in the original mtk_hdmi_dt_parse_pdata
code and does not need to be called a second time.
So, remove this call from mtk_hdmi_get_cec_dev to keep the same sequence
as previously.
Fixes: 7485be967f7f ("drm/mediatek: mtk_hdmi: Move CEC device parsing in new function")
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20251023-mediatek-drm-hdmi-v2-v11-1-7873ec4a1edf@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Make sure to drop the references to the DDC adapter and CEC device
taken during probe on probe failure (e.g. probe deferral) and on driver
unbind.
Fixes: 8f83f26891e1 ("drm/mediatek: Add HDMI support")
Cc: stable@vger.kernel.org # 4.8
Cc: Jie Qiu <jie.qiu@mediatek.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250923152340.18234-5-johan@kernel.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.19:
UAPI Changes:
- Add sysfs entries, coredump support and uevents to QAIC.
- Add fdinfo memory statistics to ivpu.
Cross-subsystem Changes:
- Handle stub fence initialization during module init.
- Stop using system_wq in scheduler and drivers.
Core Changes:
- Documentation updates to ttm, vblank.
- Add EDID quirk for sharp panel.
- Use drm_crtc_vblank_(crtc,waitqueue) more in core and drivers.
Driver Changes:
- Small updates and fixes to panfrost, amdxdna, vmwgfx, ast, ivpu.
- Handle preemption in amdxdna.
- Add PM support to qaic.
- Huge refactor of sun4i's layer code to decouple plane code from output
and improve support for DE33.
- Add larger page and compression support to nouveau.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/1ad3ea69-d029-4a21-8b3d-6b264b1b2a30@linux.intel.com
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Driver Changes:
Avoid TOCTOU when montoring throttle reasons (Lucas)
Add/extend workaround (Nitin)
SRIOV migration work / plumbing (Michal Wajdeczko, Michal Winiarski, Lukasz)
Drop debug flag requirement for VF resource fixup
Fix MTL vm_max_level (Rodrigo)
Changes around TILE_ADDR_RANGE for platform compatibility
(Fei, Lucas)
Add runtime registers for GFX ver >= 35 (Piotr)
Kerneldoc fix (Kriish)
Rework pcode error mapping (Lucas)
Allow lockdown the PF (Michal)
Eliminate GUC code caching of some frequency values (Sk)
Improvements around forcewake referencing (Matt Roper)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/aRcJOrisG2qPbucE@fedora
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes:
Limit number of jobs per exec queue (Shuicheng)
Add sriov_admin sysfs tree (Michal)
Driver Changes:
Fix an uninitialized value (Thomas)
Expose a residency counter through debugfs (Mohammed Thasleem)
Workaround enabling and improvement (Tapani, Tangudu)
More Crescent Island-specific support (Sk Anirban, Lucas)
PAT entry dump imprement (Xin)
Inline gt_reset in the worker (Lucas)
Synchronize GT reset with device unbind (Balasubramani)
Do clean shutdown also when using flr (Jouni)
Fix serialization on burst of unbinds (Matt Brost)
Pagefault Refactor (Matt Brost)
Remove some unused code (Gwan-gyeong)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/aQuBECxNOhudc0Bz@fedora
|
|
The Parade PS185HDM is a transparent Displayport to HDMI bridge.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Maud Spierings <maud_spierings@hotmail.com>
Link: https://patch.msgid.link/20251116-asus_usbc_dp-v2-2-cc8f51136c9f@hotmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Add support for Adreno 612 GPU found in SM6150/QCS615 chipsets.
A612 falls under ADRENO_6XX_GEN1 family and is a cut down version
of A615 GPU.
A612 has a new IP called Reduced Graphics Management Unit or RGMU
which is a small state machine which helps to toggle GX GDSC
(connected to CX rail) to implement IFPC feature. It doesn't support
any other features of a full fledged GMU like clock control, resource
voting to rpmh etc. So we need linux clock driver support like other
gmu-wrapper implementations to control gpu core clock and gpu GX gdsc.
This patch skips RGMU core initialization and act more like a
gmu-wrapper case.
Signed-off-by: Jie Zhang <quic_jiezh@quicinc.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/686212/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
|
|
vm_op_enqueue() allocates an msm_vm_op struct with kmalloc,
but the return value is not checked for NULL value which
can be returned by kmalloc under low-memory conditions.
This can result in NULL pointer dereference when the pointer
is dereferenced.
Add NULL check after the allocation and propagate -ENOMEM back
to the caller in case of a failure.
Signed-off-by: Gopi Krishna Menon <krishnagopi487@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/678416/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
|
|
Current gu2host handler registered as MSI-X vector 0 and as per bspec for
a msix vector 0 interrupt, the driver must check the legacy registers
190008(TILE_INT_REG), 190060h (GT INTR Identity Reg 0) and other registers
mentioned in "Interrupt Service Routine Pseudocode" otherwise it will block
the next interrupts. To overcome this issue replacing guc2host handler
with legacy xe_irq_handler.
Fixes: da889070be7b2 ("drm/xe/irq: Separate MSI and MSI-X flows")
Bspec: 62357
Signed-off-by: Venkata Ramana Nayana <venkata.ramana.nayana@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patch.msgid.link/20251107083141.2080189-1-venkata.ramana.nayana@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
calculate used layers
When there are multiple Video Ports, and only one of them is working
(for example, VP1 is working while VP0 is not), in this case, the
win_mask of VP0 is 0. However, we have already set the port mux for VP0
according to vp0->nlayers, and at the same time, in the OVL_LAYER_SEL
register, there are windows will also be assigned to layers which will
map to the inactive VPs. In this situation, vp0->win_mask is zero as it
now working, it is more reliable to calculate the used layers based on
the configuration of the OVL_LAYER_SEL register.
Note: as the configuration of OVL_LAYER_SEL is take effect when the
vsync is come, so we use the value backup in vop2->old_layer_sel instead
of read OVL_LAYER_SEL directly.
Fixes: 3e89a8c68354 ("drm/rockchip: vop2: Fix the update of LAYER/PORT select registers when there are multi display output on rk3588/rk3568")
Cc: stable@vger.kernel.org
Reported-by: Diederik de Haas <diederik@cknow-tech.com>
Closes: https://bugs.kde.org/show_bug.cgi?id=511274
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Dang Huynh <dang.huynh@mainlining.org>
Tested-by: Diederik de Haas <diederik@cknow-tech.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251112085024.2480111-1-andyshrk@163.com
|
|
Use VOP for DMA operations performed by DRM core. Rockchip DRM driver
is backed by a virtual device that isn't IOMMU-capable, while VOP is the
actual display controller device backed by IOMMU. Fixes "swiotlb buffer
is full" warning messages originated from GEM prime code paths.
Note, that backporting is non-trivial as this depends on
commit 143ec8d3f9396 ("drm/prime: Support dedicated DMA device for dma-buf
imports"), which landed in v6.16 and commit 421be3ee36a4 ("drm/rockchip:
Refactor IOMMU initialisation"), which landed in v5.19.
Reported-by: Daniel Stone <daniels@collabora.com>
Fixes: 2048e3286f34 ("drm: rockchip: Add basic drm driver")
Cc: stable@vger.kernel.org # v6.16+
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Tested-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251022161948.199731-1-dmitry.osipenko@collabora.com
|
|
Since both RK3576 and RK3588 SoCs are capable of handling 10 bpc color
depth, introduce a pair of new helpers to program the necessary
registers, as well as passing bpc at PHY configuration level.
Note max_bpc is unconditionally set to 10 before initializing the QP
bridge library, as there is no need to adjust it dynamically, i.e. per
SoC variant, for now.
While setting up .enc_init() callbacks of rockchip_hdmi_qp_ctrl_ops,
also replace the unnecessary whitespace chars before .irq_callback()
assignments.
Acked-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251021-rk3588-10bpc-v3-5-3d3eed00a6db@collabora.com
|
|
For consistency and improved readability, redefine a few RK3576 specific
register configurations by relying on GENMASK() and unshifted values for
color depth and output format. Those are not used at the moment, but
will be needed soon to support the related features.
While at it, drop a few other defines which are unlikely to be ever
required.
Acked-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251021-rk3588-10bpc-v3-4-3d3eed00a6db@collabora.com
|
|
Stop relying on phy_set_bus_width() based workaround to setup the TMDS
character rate and, instead, use the recently introduced HDMI PHY
configuration API. This is also a prerequisite to enable high color
depth and FRL support.
Additionally, move the logic to ->atomic_check() callback where the
current mode rate is already provided by the connector state. As a
matter of fact this is actually necessary to ensure the link rate is
configured before VOP2 attempts to use the PHY PLL as a DCLK source in
vop2_crtc_atomic_enable(). The rationale is to restrict any changes of
the PHY rate via CCF and, instead, prefer the PHY configuration API for
this purpose.
Acked-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251021-rk3588-10bpc-v3-3-3d3eed00a6db@collabora.com
|
|
Extend struct dw_hdmi_qp_plat_data to include the supported display
output formats and maximum bits per color channel. When provided by the
platform driver, use them to setup the HDMI bridge accordingly.
Additionally, improve debug logging in dw_hdmi_qp_bridge_atomic_enable()
to also show the current HDMI output format and bpc.
Acked-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251021-rk3588-10bpc-v3-2-3d3eed00a6db@collabora.com
|
|
When making use of the HDMI PHY PLL as a VOP2 DCLK source, it's output
rate does normally match the mode clock. But this is only applicable
for default color depth of 8 bpc. For higher depths, the output clock
is further divided by the hardware according to the formula:
output rate = PHY PLL rate * 8 / bpc
Hence there is no need for VOP2 to compensate for bpc when adjusting
DCLK, but it is required to do so when computing its maximum operating
frequency.
Take color depth into consideration before deciding to switch DCLK
source.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251021-rk3588-10bpc-v3-1-3d3eed00a6db@collabora.com
|
|
during probing
The DRM_DEV_ERROR() has been deprecated, and use dev_err_probe()
can be better. The other reason is that dev_err_probe() help avoid
unexpected repeated err logs during defered probing.
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251110075817.1159857-1-damon.ding@rock-chips.com
|
|
The name of the enable_gpio member in struct rockchip_hdmi_qp is too
generic, as initially "borrowed" from downstream BSP code. Moreover,
this hasn't been really in use so far, since there is neither a DT
providing an "enable-gpios" property to any of the "hdmi" nodes, nor a
binding documenting it.
The actual purpose of this GPIO line is to control the voltage bias for
the HDMI TX data lines when switching between TMDS and FRL operating
modes.
A previous patch introduced the "frl-enable-gpios" property of the
RK3588 HDMI TX Controller binding, hence pass the updated string to
devm_gpiod_get_optional(), rename the struct member accordingly and set
it to a low level.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251027222641.25066-3-laurent.pinchart@ideasonboard.com
|
|
The code incorrectly assumes that the VRAM save/restore fence is valid.
Fix it by checking for error.
Fixes: 49cf1b9b609fe ("drm/xe/pf: Handle VRAM migration data as part of PF control")
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251114122339.1791026-1-michal.winiarski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
|
|
The reference is only dropped on error. Fix it by adding the missing
xe_bo_put().
Fixes: 49cf1b9b609fe ("drm/xe/pf: Handle VRAM migration data as part of PF control")
Reported-by: Adam Miszczak <adam.miszczak@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patch.msgid.link/20251114100713.1776073-1-michal.winiarski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
|
|
Add support for booting and using NVJPG on Tegra210 to the Host1x
and TegraDRM drivers. This driver only supports the new TegraDRM uAPI.
Acked-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20250630-diogo-nvjpg-v3-1-a553c7e91354@tecnico.ulisboa.pt
|
|
PCIe r7.0, sec 7.8.6, defines resizable BAR sizes beyond the currently
supported maximum of 128TB, which will require more than u32 to store the
entire bitmask.
Convert Resizable BAR related functions to use u64 bitmask for BAR sizes to
make the typing more future-proof.
The support for the larger BAR sizes themselves is not added at this point.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20251113180053.27944-12-ilpo.jarvinen@linux.intel.com
|
|
Use pci_rebar_get_max_size() to simplify amdgpu_device_resize_fb_bar().
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20251113180053.27944-11-ilpo.jarvinen@linux.intel.com
|
|
Use pci_rebar_get_max_size() from PCI core in resize_vram_bar() to simplify
code.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20251113180053.27944-10-ilpo.jarvinen@linux.intel.com
|
|
PCI core provides pci_rebar_size_supported() and pci_rebar_size_to_bytes();
use them in resize_vram_bar() to simplify code.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20251113180053.27944-8-ilpo.jarvinen@linux.intel.com
|
|
PCI core provides pci_rebar_size_supported() that helps in checking if an
encoded BAR Size is supported for the BAR or not. Use it in
i915_resize_lmem_bar() to simplify code.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20251113180053.27944-7-ilpo.jarvinen@linux.intel.com
|
|
PCI core handles releasing device's resources and their rollback in case of
failure of a BAR resizing operation. Releasing resource prior to calling
pci_resize_resource() prevents PCI core from restoring the BARs as they
were.
Remove driver-side release of BARs from the amdgpu driver.
Also remove the driver initiated assignment as pci_resize_resource() should
try to assign as much as possible. If the driver side call manages to get
more required resources assigned in some scenario, such a problem should be
fixed inside pci_resize_resource() instead.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org> # AVA, AMD GPU
Link: https://patch.msgid.link/20251113162628.5946-11-ilpo.jarvinen@linux.intel.com
|
|
PCI core handles releasing device's resources and their rollback in case of
failure of a BAR resizing operation. Releasing resource prior to calling
pci_resize_resource() prevents PCI core from restoring the BARs as they
were.
Remove driver-side release of BARs from the i915 driver.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patch.msgid.link/20251113162628.5946-10-ilpo.jarvinen@linux.intel.com
|
|
PCI core handles releasing device's resources and their rollback in case of
failure of a BAR resizing operation. Releasing resource prior to calling
pci_resize_resource() prevents PCI core from restoring the BARs as they
were.
Remove driver-side release of BARs from the xe driver.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patch.msgid.link/20251113162628.5946-9-ilpo.jarvinen@linux.intel.com
|
|
BAR resize operation is implemented in the pci_resize_resource() and
pbus_reassign_bridge_resources() functions. pci_resize_resource() can be
called either from __resource_resize_store() from sysfs or directly by the
driver for the Endpoint Device.
The pci_resize_resource() requires that caller has released the device
resources that share the bridge window with the BAR to be resized as
otherwise the bridge window is pinned in place and cannot be changed.
pbus_reassign_bridge_resources() rolls back resources if the resize
operation fails, but rollback is performed only for the bridge windows.
Because releasing the device resources are done by the caller of the BAR
resize interface, these functions performing the BAR resize do not have
access to the device resources as they were before the resize.
pbus_reassign_bridge_resources() could try __pci_bridge_assign_resources()
after rolling back the bridge windows as they were, however, it will not
guarantee the resource are assigned due to differences in how FW and the
kernel assign the resources (alignment of the start address and tail).
To perform rollback robustly, the BAR resize interface has to be altered to
also release the device resources that share the bridge window with the BAR
to be resized.
Also, remove restoring from the entries failed list as saved list should
now contain both the bridge windows and device resources so the extra
restore is duplicated work.
Some drivers (currently only amdgpu) want to prevent releasing some
resources. Add exclude_bars param to pci_resize_resource() and make amdgpu
pass its register BAR (BAR 2 or 5), which should never be released during
resize operation. Normally 64-bit prefetchable resources do not share a
bridge window with the 32-bit only register BAR, but there are various
fallbacks in the resource assignment logic which may make the resources
share the bridge window in rare cases.
This change (together with the driver side changes) is to counter the
resource releases that had to be done to prevent resource tree corruption
in the ("PCI: Release assigned resource before restoring them") change. As
such, it likely restores functionality in cases where device resources were
released to avoid resource tree conflicts which appeared to be "working"
when such conflicts were not correctly detected by the kernel.
Reported-by: Simon Richter <Simon.Richter@hogyros.de>
Link: https://lore.kernel.org/linux-pci/f9a8c975-f5d3-4dd2-988e-4371a1433a60@hogyros.de/
Reported-by: Alex Bennée <alex.bennee@linaro.org>
Link: https://lore.kernel.org/linux-pci/874irqop6b.fsf@draig.linaro.org/
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: squash amdgpu BAR selection from
https://lore.kernel.org/r/20251114103053.13778-1-ilpo.jarvinen@linux.intel.com]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org> # AVA, AMD GPU
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20251113162628.5946-7-ilpo.jarvinen@linux.intel.com
|
|
Calculate packet parameters for video mode same way it is done for
command mode, by halving timings plugged into equations.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20250909073335.91531-3-clamor95@gmail.com
|
|
Move SOL delay calculation outside of video mode conditions.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20250909073335.91531-2-clamor95@gmail.com
|
