| Age | Commit message (Collapse) | Author |
|---|
|
These IOCTLs shouldn't be called when userqs are not
enabled. Make sure they are enabled before executing
the IOCTLs.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d967509651601cddce7ff2a9f09479f3636f684d)
Cc: stable@vger.kernel.org
|
|
This patch adds robust reset handling for user queues (userq) to improve
recovery from queue failures. The key components include:
1. Queue detection and reset logic:
- amdgpu_userq_detect_and_reset_queues() identifies failed queues
- Per-IP detect_and_reset callbacks for targeted recovery
- Falls back to full GPU reset when needed
2. Reset infrastructure:
- Adds userq_reset_work workqueue for async reset handling
- Implements pre/post reset handlers for queue state management
- Integrates with existing GPU reset framework
3. Error handling improvements:
- Enhanced state tracking with HUNG state
- Automatic reset triggering on critical failures
- VRAM loss handling during recovery
4. Integration points:
- Added to device init/reset paths
- Called during queue destroy, suspend, and isolation events
- Handles both individual queue and full GPU resets
The reset functionality works with both gfx/compute and sdma queues,
providing better resilience against queue failures while minimizing
disruption to unaffected queues.
v2: add detection and reset calls when preemption/unmaped fails.
add a per device userq counter for each user queue type.(Alex)
v3: make sure we hold the adev->userq_mutex when we call amdgpu_userq_detect_and_reset_queues. (Alex)
warn if the adev->userq_mutex is not held.
v4: make sure we have all of the uqm->userq_mutex held.
warn if the uqm->userq_mutex is not held.
v5: Use array for user queue type counters.(Alex)
all of the uqm->userq_mutex need to be held when calling detect and reset. (Alex)
v6: fix lock dep warning in amdgpu_userq_fence_dence_driver_process
v7: add the queue types in an array and use a loop in amdgpu_userq_detect_and_reset_queues (Lijo)
v8: remove atomic_set(&userq_mgr->userq_count[i], 0).
it should already be 0 since we kzalloc the structure (Alex)
v9: For consistency with kernel queues, We may want something like:
amdgpu_userq_is_reset_type_supported (Alex)
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This commit refactors the AMDGPU userqueue management subsystem to replace
IDR (ID Allocation) with XArray for improved performance, scalability, and
maintainability. The changes address several issues with the previous IDR
implementation and provide better locking semantics.
Key changes:
1. **Global XArray Introduction**:
- Added `userq_doorbell_xa` to `struct amdgpu_device` for global queue tracking
- Uses doorbell_index as key for efficient global lookup
- Replaces the previous `userq_mgr_list` linked list approach
2. **Per-process XArray Conversion**:
- Replaced `userq_idr` with `userq_mgr_xa` in `struct amdgpu_userq_mgr`
- Maintains per-process queue tracking with queue_id as key
- Uses XA_FLAGS_ALLOC for automatic ID allocation
3. **Locking Improvements**:
- Removed global `userq_mutex` from `struct amdgpu_device`
- Replaced with fine-grained XArray locking using XArray's internal spinlocks
4. **Runtime Idle Check Optimization**:
- Updated `amdgpu_runtime_idle_check_userq()` to use xa_empty
5. **Queue Management Functions**:
- Converted all IDR operations to equivalent XArray functions:
- `idr_alloc()` → `xa_alloc()`
- `idr_find()` → `xa_load()`
- `idr_remove()` → `xa_erase()`
- `idr_for_each()` → `xa_for_each()`
Benefits:
- **Performance**: XArray provides better scalability for large numbers of queues
- **Memory Efficiency**: Reduced memory overhead compared to IDR
- **Thread Safety**: Improved locking semantics with XArray's internal spinlocks
v2: rename userq_global_xa/userq_xa to userq_doorbell_xa/userq_mgr_xa
Remove xa_lock and use its own lock.
v3: Set queue->userq_mgr = uq_mgr in amdgpu_userq_create()
v4: use xa_store_irq (Christian)
hold the read side of the reset lock while creating/destroying queues and the manager data structure. (Chritian)
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When a user unmaps a userq VA, the driver must ensure
the queue has no in-flight jobs. If there is pending work,
the kernel should wait for the attached eviction (bookkeeping)
fence to signal before deleting the mapping.
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add the userq object virtual address list_add() helpers
for tracking the userq obj va address usage.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Extend the userq state for identifying the
userq invalid cases.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
It needs to validate the userq object virtual address to
determine whether it is residented in a valid vm mapping.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This is no invocation for amdgpu_userq_active().
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add a detect and reset callback and add the implementation
for mes. The callback will detect all hung queues of a
particular ip type (e.g., GFX or compute or SDMA) and
reset them.
v2: increase reset counter and set fence force completion
v3: Removed userq_mutex in mes_userq_detect_and_reset since the driver holds it when calling
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add two new function pointers to struct amdgpu_userq_funcs:
- preempt: To handle preemption of user mode queues
- restore: To restore preempted user mode queues
These callbacks will allow the driver to properly manage queue
preemption and restoration when needed, such as during context
switching or priority changes.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add debugfs support for mqd for each queue of the client.
The address exposed to debugfs could be used to dump
the mqd.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250704075548.1549849-5-sunil.khatri@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
drm_file will be used in usermode queues code to
enable better process information in logging and hence
add drm_file part of the userq_mgr struct.
update the drm_file pointer in userq_mgr for each
amdgpu_driver_open_kms.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
s/userqueue/userq/
1. remove the mix of amdgpu_userqueue and amdgpu_userq
2. to be consistent with other amdgpu_userq_fence.c
3. it's shorter
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
