| Age | Commit message (Collapse) | Author |
|---|
|
Add ecb mode support for aes, des, 3des and arc4 ciphers.
ecb(*) reuses existing skcipher implementation, updating it with support
for no IV.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Previously, a tree-wide change added SPDX license identifiers to
files lacking licensing information:
b24413180f56 ("License cleanup: add SPDX GPL-2.0 license identifier to files with no license")
To be consistent update the rest of the files:
-files with license specified by means of MODULE_LICENSE()
-files with complete license text
-Kconfig
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This driver implements a (part of a) network driver, and fails to
build if we have turned off networking support:
drivers/crypto/caam/caamalg_qi2.o: In function `dpaa2_caam_fqdan_cb':
caamalg_qi2.c:(.text+0x577c): undefined reference to `napi_schedule_prep'
caamalg_qi2.c:(.text+0x578c): undefined reference to `__napi_schedule_irqoff'
drivers/crypto/caam/caamalg_qi2.o: In function `dpaa2_dpseci_poll':
caamalg_qi2.c:(.text+0x59b8): undefined reference to `napi_complete_done'
drivers/crypto/caam/caamalg_qi2.o: In function `dpaa2_caam_remove':
caamalg_qi2.c:(.text.unlikely+0x4e0): undefined reference to `napi_disable'
caamalg_qi2.c:(.text.unlikely+0x4e8): undefined reference to `netif_napi_del'
drivers/crypto/caam/caamalg_qi2.o: In function `dpaa2_dpseci_setup':
caamalg_qi2.c:(.text.unlikely+0xc98): undefined reference to `netif_napi_add'
From what I can tell, CONFIG_NETDEVICES is the correct dependency here,
and adding it fixes the randconfig failures.
Fixes: 8d818c105501 ("crypto: caam/qi2 - add DPAA2-CAAM driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add support for unkeyed and keyed (hmac) md5, sha algorithms.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
caam/qi2 driver will support ahash algorithms,
thus move ahash descriptors generation in a shared location.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add support to submit the following skcipher algorithms
via the DPSECI backend:
cbc({aes,des,des3_ede})
ctr(aes), rfc3686(ctr(aes))
xts(aes)
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add CAAM driver that works using the DPSECI backend, i.e. manages
DPSECI DPAA2 objects sitting on the Management Complex (MC) fsl-mc bus.
Data transfers (crypto requests) are sent/received to/from CAAM crypto
engine via Queue Interface (v2), this being similar to existing caam/qi.
OTOH, configuration/setup (obtaining virtual queue IDs, authorization
etc.) is done by sending commands to the MC f/w.
Note that the CAAM accelerator included in DPAA2 platforms still has
Job Rings. However, the driver being added does not handle access
via this backend. Kconfig & Makefile are updated such that DPAA2-CAAM
(a.k.a. "caam/qi2") driver does not depend on caam/jr or caam/qi
backends - which rely on platform bus support (ctrl.c).
Support for the following aead and authenc algorithms is also added
in this patch:
-aead:
gcm(aes)
rfc4106(gcm(aes))
rfc4543(gcm(aes))
-authenc:
authenc(hmac({md5,sha*}),cbc({aes,des,des3_ede}))
echainiv(authenc(hmac({md5,sha*}),cbc({aes,des,des3_ede})))
authenc(hmac({md5,sha*}),rfc3686(ctr(aes))
seqiv(authenc(hmac({md5,sha*}),rfc3686(ctr(aes)))
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When built using multi_v7_defconfig, driver does not work on LS1021A:
[...]
caam 1700000.crypto: can't identify CAAM ipg clk: -2
caam: probe of 1700000.crypto failed with error -2
[...]
It turns out we have to detect at runtime whether driver is running
on an i.MX platform or not.
Cc: <stable@vger.kernel.org>
Fixes: 6c3af9559352 ("crypto: caam - add support for LS1021A")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add support to submit ablkcipher and authenc algorithms
via the QI backend:
-ablkcipher:
cbc({aes,des,des3_ede})
ctr(aes), rfc3686(ctr(aes))
xts(aes)
-authenc:
authenc(hmac(md5),cbc({aes,des,des3_ede}))
authenc(hmac(sha*),cbc({aes,des,des3_ede}))
caam/qi being a new driver, let's wait some time to settle down without
interfering with existing caam/jr driver.
Accordingly, for now all caam/qi algorithms (caamalg_qi module) are
marked to be of lower priority than caam/jr ones (caamalg module).
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The drivers/crypto/caam/ directory is entered during build only
for building modules when CONFIG_CRYPTO_DEV_FSL_CAAM=m, but
CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC is defined as a
'bool' symbol, meaning that caamalg_desc.c is always compiled
into built-in code, or not at all, leading to a link failure:
ERROR: "cnstr_shdsc_xts_ablkcipher_decap" [drivers/crypto/caam/caamalg.ko] undefined!
ERROR: "cnstr_shdsc_xts_ablkcipher_encap" [drivers/crypto/caam/caamalg.ko] undefined!
ERROR: "cnstr_shdsc_aead_givencap" [drivers/crypto/caam/caamalg.ko] undefined!
ERROR: "cnstr_shdsc_aead_decap" [drivers/crypto/caam/caamalg.ko] undefined!
ERROR: "cnstr_shdsc_aead_encap" [drivers/crypto/caam/caamalg.ko] undefined!
ERROR: "cnstr_shdsc_aead_null_decap" [drivers/crypto/caam/caamalg.ko] undefined!
ERROR: "cnstr_shdsc_aead_null_encap" [drivers/crypto/caam/caamalg.ko] undefined!
ERROR: "cnstr_shdsc_rfc4106_decap" [drivers/crypto/caam/caamalg.ko] undefined!
ERROR: "cnstr_shdsc_rfc4106_encap" [drivers/crypto/caam/caamalg.ko] undefined!
...
Making caamalg_desc itself a loadable module fixes this configuration
by ensuring the driver gets built. Aside from making the symbol
'tristate', I'm adding appropriate module metadata here.
Fixes: 8cea7b66b821 ("crypto: caam - refactor encryption descriptors generation")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Refactor the generation of the authenc, ablkcipher shared descriptors
and exports the functionality, such that they could be shared
with the upcoming caam/qi (Queue Interface) driver.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Remove dependency on CRYPTO_DEV_FSL_CAAM where superfluous:
depends on CRYPTO_DEV_FSL_CAAM && CRYPTO_DEV_FSL_CAAM_JR
is equivalent to
depends on CRYPTO_DEV_FSL_CAAM_JR
since CRYPTO_DEV_FSL_CAAM_JR depends on CRYPTO_DEV_FSL_CAAM.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add RSA support to caam driver.
Initial author is Yashpal Dutta <yashpal.dutta@freescale.com>.
Signed-off-by: Tudor Ambarus <tudor-dan.ambarus@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This basically adds support for ls1043a platform.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
There are SoCs like LS1043A where CAAM endianness (BE) does not match
the default endianness of the core (LE).
Moreover, there are requirements for the driver to handle cases like
CPU_BIG_ENDIAN=y on ARM-based SoCs.
This requires for a complete rewrite of the I/O accessors.
PPC-specific accessors - {in,out}_{le,be}XX - are replaced with
generic ones - io{read,write}[be]XX.
Endianness is detected dynamically (at runtime) to allow for
multiplatform kernels, for e.g. running the same kernel image
on LS1043A (BE CAAM) and LS2080A (LE CAAM) armv8-based SoCs.
While here: debugfs entries need to take into consideration the
endianness of the core when displaying data. Add the necessary
glue code so the entries remain the same, but they are properly
read, regardless of the core and/or SEC endianness.
Note: pdb.h fixes only what is currently being used (IPsec).
Reviewed-by: Tudor Ambarus <tudor-dan.ambarus@nxp.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
LS1021A is a QorIQ SoC having little endian CAAM.
There are a few differences b/w QorIQ and i.MX from CAAM perspective:
1. i.MX platforms are somewhat special wrt. 64-bit registers:
-big endian format at 64-bit level: MSW at address+0 and LSW at address+4
-little endian format at 32-bit level (within MSW and LSW)
and thus need special handling.
2. No CCM (clock controller module) for QorIQ.
No CAAM clocks to enable / disable.
A new Kconfig option - CRYPTO_DEV_FSL_CAAM_LE - is added to indicate
CAAM is little endian (*). It is hidden from the user (to avoid
misconfiguration); when adding support for a new platform with LE CAAM,
either the Kconfig needs to be updated or the corresponding defconfig
needs to indicate that CAAM is LE.
(*) Using a DT property to provide CAAM endianness would not allow
for the ifdeffery.
In order to keep changes to a minimum, the following changes
are postponed:
-endianness fix of the last word in the S/G (rsvd2, bpid, offset),
fields are always 0 anyway;
-S/G format fix for i.MX7 (yes, i.MX7 support was not added yet,
but still...)
Signed-off-by: Horia Geant? <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Allow CAAM to be selected in the kernel for Freescale i.MX devices if
ARCH_MXC is enabled.
Signed-off-by: Steve Cornelius <steve.cornelius@freescale.com>
Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
Tested-by: Horia Geantă <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch fixes a number of problems in crypto driver Kconfig
entries:
1. Select BLKCIPHER instead of BLKCIPHER2. The latter is internal
and should not be used outside of the crypto API itself.
2. Do not select ALGAPI unless you use a legacy type like
CRYPTO_ALG_TYPE_CIPHER.
3. Select the algorithm type that you are implementing, e.g., AEAD.
4. Do not select generic C code such as CBC/ECB unless you use them
as a fallback.
5. Remove default n since that is the default default.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The SEC Job Rings are now available as individual devices.
This would enable sharing of job rings between kernel and
user space. Job Rings can now be dynamically bound/unbound
from kernel.
Changes are made in the following layers of CAAM Driver
1. Controller driver
- Does basic initialization of CAAM Block.
- Creates platform devices for Job Rings.
(Earlier the initialization of Job ring was done
by the controller driver)
2. JobRing Platform driver
- Manages the platform Job Ring devices created
by the controller driver
Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
Reviewed-by: Garg Vakul-B16394 <vakul@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds an option to the Kconfig file for
SEC which enables the user to see the debug messages
that are printed inside the SEC driver.
Signed-off-by: Alex Porosanu <alexandru.porosanu@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The Kconfig entry for CAAM's hash algorithm implementations has always
selected CRYPTO_AHASH. But there's no corresponding Kconfig symbol.
It seems it was intended to select CRYPTO_HASH, like other crypto
drivers do. That would apparently (indirectly) select CRYPTO_HASH2,
which would enable the ahash functionality this driver uses.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Reviewed-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
It has been observed that in zero-loss benchmarks, when a
slow traffic rate is being tested, the IRQ timer coalescing
parameter was set too high, and the ethernet controller
would start dropping packets because the job ring back half
wouldn't be executed in time before the ethernet controller
would fill its buffers, thereby significantly reducing the
zero-loss performance figures.
Empirical testing has shown that the best zero-loss performance
is achieved when IRQ coalescing is set to minimum values and/or
turned off, since apparently the job ring driver already implements
an adequately-performing general-purpose IRQ mitigation strategy
in software.
Whilst we could go with minimal count (2-8) and timing settings
(192-256), we prefer just turning h/w coalescing altogether off
to minimize setkey latency (due to split key generation), and
for consistent cross-SoC performance (the SEC vs. core clock
ratio changes).
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
caam_read copies random bytes from two buffers into output.
caam rng can fill empty buffer 0xffff bytes at a time,
but the buffer sizes are rounded down to multiple of cacheline size.
Signed-off-by: Yuan Kang <Yuan.Kang@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
caam supports ahash hmac with sha algorithms and md5.
Signed-off-by: Yuan Kang <Yuan.Kang@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The SEC4 supercedes the SEC2.x/3.x as Freescale's
Integrated Security Engine. Its programming model is
incompatible with all prior versions of the SEC (talitos).
The SEC4 is also known as the Cryptographic Accelerator
and Assurance Module (CAAM); this driver is named caam.
This initial submission does not include support for Data Path
mode operation - AEAD descriptors are submitted via the job
ring interface, while the Queue Interface (QI) is enabled
for use by others. Only AEAD algorithms are implemented
at this time, for use with IPsec.
Many thanks to the Freescale STC team for their contributions
to this driver.
Signed-off-by: Steve Cornelius <sec@pobox.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
