summaryrefslogtreecommitdiff
path: root/drivers/block
AgeCommit message (Collapse)Author
2021-02-22loop: fix I/O error on fsync() in detached loop devicesMauricio Faria de Oliveira
There's an I/O error on fsync() in a detached loop device if it has been previously attached. The issue is write cache is enabled in the attach path in loop_configure() but it isn't disabled in the detach path; thus it remains enabled in the block device regardless of whether it is attached or not. Now fsync() can get an I/O request that will just be failed later in loop_queue_rq() as device's state is not 'Lo_bound'. So, disable write cache in the detach path. Do so based on the queue flag, not the loop device flag for read-only (used to enable) as the queue flag can be changed via sysfs even on read-only loop devices (e.g., losetup -r.) Test-case: # DEV=/dev/loop7 # IMG=/tmp/image # truncate --size 1M $IMG # losetup $DEV $IMG # losetup -d $DEV Before: # strace -e fsync parted -s $DEV print 2>&1 | grep fsync fsync(3) = -1 EIO (Input/output error) Warning: Error fsyncing/closing /dev/loop7: Input/output error [ 982.529929] blk_update_request: I/O error, dev loop7, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 0 After: # strace -e fsync parted -s $DEV print 2>&1 | grep fsync fsync(3) = 0 Co-developed-by: Eric Desrochers <eric.desrochers@canonical.com> Signed-off-by: Eric Desrochers <eric.desrochers@canonical.com> Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com> Tested-by: Gabriel Krisman Bertazi <krisman@collabora.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-21n64: store dev instance into disk private dataChaitanya Kulkarni
The device instance is declared globally. Remove global variable & use the disk->private_data to store the device instance in the n64cart_probe() and get the same instance from bio->bi_disk->private data in n64cart_submit_bio. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Lauri Kasanen <cand@gmx.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-02-21n64: cleanup n64cart_probe()Chaitanya Kulkarni
The goto label fail_queue is needed to cleanup the queue allocation when devm_platform_ioremap_resource() or alloc_disk() fails, either of these two functions are not dependent on the queue variable which is allocated prior to these calls. Allocate the queue variable after successful alloc_disk(). Return error directly when devm_platform_ioremap_resource() or alloc_disk() fail. Remove fail_queue label and a call to the blk_cleanup_queue(). Direct return from these two functions allows us to remove the local variable err and allocating queue after alloc_disk() allows us to remove the local variable queue so we use disk->queue directly. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Lauri Kasanen <cand@gmx.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-02-21n64: cosmetics changesChaitanya Kulkarni
Make the variable declaration ascending order and initialize the variables at the time of declaration when possible. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Lauri Kasanen <cand@gmx.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-02-21n64: remove curly bracketsChaitanya Kulkarni
Remove extra braces for the if which has only single statement. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Lauri Kasanen <cand@gmx.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-02-21n64: use sector SECTOR_SHIFT instead 512Chaitanya Kulkarni
Instead of using magic numbers use SECTOR_SHIFT to get the number of sectors from the size. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Lauri Kasanen <cand@gmx.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-02-21n64: use enums for regChaitanya Kulkarni
Macros tend to be not type-safe. Use enum for register definitions. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Lauri Kasanen <cand@gmx.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-02-21n64: move module param at the topChaitanya Kulkarni
Move module parameters at the top of the file after macro definition & global variables below macro definitions just like we have for other modules. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Lauri Kasanen <cand@gmx.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-02-21n64: move module info at the endChaitanya Kulkarni
Move the module auth, description, and license at the end of the file just like what we have for the other modules. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Lauri Kasanen <cand@gmx.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-02-21n64: use pr_fmt to avoid duplicate stringChaitanya Kulkarni
Instead of repeating the n64cart string all over the module use pr_fmt macro and remove the duplicate string. Also, replace and with or in the one of the error message. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Lauri Kasanen <cand@gmx.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-02-21block: Add n64 cart driverLauri Kasanen
This adds support for the Nintendo 64 console's carts. Carts are a read-only media ranging from 8mb to 64mb. Only one cart can be connected at once, and switching it requires a reboot. No module support to save RAM, as the target has 8mb RAM. Signed-off-by: Lauri Kasanen <cand@gmx.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-02-21Merge tag 'for-linus-5.12-rc1-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: "A series of Xen related security fixes, all related to limited error handling in Xen backend drivers" * tag 'for-linus-5.12-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen-blkback: fix error handling in xen_blkbk_map() xen-scsiback: don't "handle" error by BUG() xen-netback: don't "handle" error by BUG() xen-blkback: don't "handle" error by BUG() xen/arm: don't ignore return errors from set_phys_to_machine Xen/gntdev: correct error checking in gntdev_map_grant_pages() Xen/gntdev: correct dev_bus_addr handling in gntdev_map_grant_pages() Xen/x86: also check kernel mapping in set_foreign_p2m_mapping() Xen/x86: don't bail early from clear_foreign_p2m_mapping()
2021-02-21Merge tag 'for-5.12/drivers-2021-02-17' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block driver updates from Jens Axboe: - Remove the skd driver. It's been EOL for a long time (Damien) - NVMe pull requests - fix multipath handling of ->queue_rq errors (Chao Leng) - nvmet cleanups (Chaitanya Kulkarni) - add a quirk for buggy Amazon controller (Filippo Sironi) - avoid devm allocations in nvme-hwmon that don't interact well with fabrics (Hannes Reinecke) - sysfs cleanups (Jiapeng Chong) - fix nr_zones for multipath (Keith Busch) - nvme-tcp crash fix for no-data commands (Sagi Grimberg) - nvmet-tcp fixes (Sagi Grimberg) - add a missing __rcu annotation (Christoph) - failed reconnect fixes (Chao Leng) - various tracing improvements (Michal Krakowiak, Johannes Thumshirn) - switch the nvmet-fc assoc_list to use RCU protection (Leonid Ravich) - resync the status codes with the latest spec (Max Gurtovoy) - minor nvme-tcp improvements (Sagi Grimberg) - various cleanups (Rikard Falkeborn, Minwoo Im, Chaitanya Kulkarni, Israel Rukshin) - Floppy O_NDELAY fix (Denis) - MD pull request - raid5 chunk_sectors fix (Guoqing) - Use lore links (Kees) - Use DEFINE_SHOW_ATTRIBUTE for nbd (Liao) - loop lock scaling (Pavel) - mtip32xx PCI fixes (Bjorn) - bcache fixes (Kai, Dongdong) - Misc fixes (Tian, Yang, Guoqing, Joe, Andy) * tag 'for-5.12/drivers-2021-02-17' of git://git.kernel.dk/linux-block: (64 commits) lightnvm: pblk: Replace guid_copy() with export_guid()/import_guid() lightnvm: fix unnecessary NULL check warnings nvme-tcp: fix crash triggered with a dataless request submission block: Replace lkml.org links with lore nbd: Convert to DEFINE_SHOW_ATTRIBUTE nvme: add 48-bit DMA address quirk for Amazon NVMe controllers nvme-hwmon: rework to avoid devm allocation nvmet: remove else at the end of the function nvmet: add nvmet_req_subsys() helper nvmet: use min of device_path and disk len nvmet: use invalid cmd opcode helper nvmet: use invalid cmd opcode helper nvmet: add helper to report invalid opcode nvmet: remove extra variable in id-ns handler nvmet: make nvmet_find_namespace() req based nvmet: return uniform error for invalid ns nvmet: set status to 0 in case for invalid nsid nvmet-fc: add a missing __rcu annotation to nvmet_fc_tgt_assoc.queues nvme-multipath: set nr_zones for zoned namespaces nvmet-tcp: fix potential race of tcp socket closing accept_work ...
2021-02-21Merge tag 'for-5.12/block-2021-02-17' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull core block updates from Jens Axboe: "Another nice round of removing more code than what is added, mostly due to Christoph's relentless pursuit of tech debt removal/cleanups. This pull request contains: - Two series of BFQ improvements (Paolo, Jan, Jia) - Block iov_iter improvements (Pavel) - bsg error path fix (Pan) - blk-mq scheduler improvements (Jan) - -EBUSY discard fix (Jan) - bvec allocation improvements (Ming, Christoph) - bio allocation and init improvements (Christoph) - Store bdev pointer in bio instead of gendisk + partno (Christoph) - Block trace point cleanups (Christoph) - hard read-only vs read-only split (Christoph) - Block based swap cleanups (Christoph) - Zoned write granularity support (Damien) - Various fixes/tweaks (Chunguang, Guoqing, Lei, Lukas, Huhai)" * tag 'for-5.12/block-2021-02-17' of git://git.kernel.dk/linux-block: (104 commits) mm: simplify swapdev_block sd_zbc: clear zone resources for non-zoned case block: introduce blk_queue_clear_zone_settings() zonefs: use zone write granularity as block size block: introduce zone_write_granularity limit block: use blk_queue_set_zoned in add_partition() nullb: use blk_queue_set_zoned() to setup zoned devices nvme: cleanup zone information initialization block: document zone_append_max_bytes attribute block: use bi_max_vecs to find the bvec pool md/raid10: remove dead code in reshape_request block: mark the bio as cloned in bio_iov_bvec_set block: set BIO_NO_PAGE_REF in bio_iov_bvec_set block: remove a layer of indentation in bio_iov_iter_get_pages block: turn the nr_iovecs argument to bio_alloc* into an unsigned short block: remove the 1 and 4 vec bvec_slabs entries block: streamline bvec_alloc block: factor out a bvec_alloc_gfp helper block: move struct biovec_slab to bio.c block: reuse BIO_INLINE_VECS for integrity bvecs ...
2021-02-15xen-blkback: fix error handling in xen_blkbk_map()Jan Beulich
The function uses a goto-based loop, which may lead to an earlier error getting discarded by a later iteration. Exit this ad-hoc loop when an error was encountered. The out-of-memory error path additionally fails to fill a structure field looked at by xen_blkbk_unmap_prepare() before inspecting the handle which does get properly set (to BLKBACK_INVALID_HANDLE). Since the earlier exiting from the ad-hoc loop requires the same field filling (invalidation) as that on the out-of-memory path, fold both paths. While doing so, drop the pr_alert(), as extra log messages aren't going to help the situation (the kernel will log oom conditions already anyway). This is XSA-365. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Juergen Gross <jgross@suse.com> Reviewed-by: Julien Grall <julien@xen.org> Signed-off-by: Juergen Gross <jgross@suse.com>
2021-02-15xen-blkback: don't "handle" error by BUG()Jan Beulich
In particular -ENOMEM may come back here, from set_foreign_p2m_mapping(). Don't make problems worse, the more that handling elsewhere (together with map's status fields now indicating whether a mapping wasn't even attempted, and hence has to be considered failed) doesn't require this odd way of dealing with errors. This is part of XSA-362. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: stable@vger.kernel.org Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2021-02-11xen/events: link interdomain events to associated xenbus deviceJuergen Gross
In order to support the possibility of per-device event channel settings (e.g. lateeoi spurious event thresholds) add a xenbus device pointer to struct irq_info() and modify the related event channel binding interfaces to take the pointer to the xenbus device as a parameter instead of the domain id of the other side. While at it remove the stale prototype of bind_evtchn_to_irq_lateeoi(). Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Wei Liu <wei.liu@kernel.org> Reviewed-by: Paul Durrant <paul@xen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10block: Replace lkml.org links with loreKees Cook
As started by commit 05a5f51ca566 ("Documentation: Replace lkml.org links with lore"), replace lkml.org links with lore to better use a single source that's more likely to stay available long-term. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-10nbd: Convert to DEFINE_SHOW_ATTRIBUTELiao Pingfang
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Liao Pingfang <winndows@163.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-10nullb: use blk_queue_set_zoned() to setup zoned devicesDamien Le Moal
Use blk_queue_set_zoned() to set a nullb device zone model instead of directly assigning the device queue zoned limit. This initialization of the devicve zoned model as well as the setup of the queue flag QUEUE_FLAG_ZONE_RESETALL and of the device queue elevator feature are moved from null_init_zoned_dev() to null_register_zoned_dev() so that the initialization of the queue limits is done when the gendisk of the nullb device is available. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@edc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-04block: remove skd driverDamien Le Moal
The STEC S1220 PCIe SSD cards are EOL since 2014 and not supported by the vendor anymore. As the skd driver for this SSD is starting to cause problems with improvements to the block layer, stop supporting it in newer kernel versions. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-04floppy: reintroduce O_NDELAY fixJiri Kosina
This issue was originally fixed in 09954bad4 ("floppy: refactor open() flags handling"). The fix as a side-effect, however, introduce issue for open(O_ACCMODE) that is being used for ioctl-only open. I wrote a fix for that, but instead of it being merged, full revert of 09954bad4 was performed, re-introducing the O_NDELAY / O_NONBLOCK issue, and it strikes again. This is a forward-port of the original fix to current codebase; the original submission had the changelog below: ==== Commit 09954bad4 ("floppy: refactor open() flags handling"), as a side-effect, causes open(/dev/fdX, O_ACCMODE) to fail. It turns out that this is being used setfdprm userspace for ioctl-only open(). Reintroduce back the original behavior wrt !(FMODE_READ|FMODE_WRITE) modes, while still keeping the original O_NDELAY bug fixed. Link: https://lore.kernel.org/r/nycvar.YFH.7.76.2101221209060.5622@cbobk.fhfr.pm Cc: stable@vger.kernel.org Reported-by: Wim Osterholt <wim@djo.tudelft.nl> Tested-by: Wim Osterholt <wim@djo.tudelft.nl> Reported-and-tested-by: Kurt Garloff <kurt@garloff.de> Fixes: 09954bad4 ("floppy: refactor open() flags handling") Fixes: f2791e7ead ("Revert "floppy: refactor open() flags handling"") Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Denis Efremov <efremov@linux.com>
2021-01-31drbd: Avoid comma separated statementsJoe Perches
Use semicolons and braces. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-29Merge tag 'block-5.11-2021-01-29' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "All over the place fixes for this release: - blk-cgroup iteration teardown resched fix (Baolin) - NVMe pull request from Christoph: - add another Write Zeroes quirk (Chaitanya Kulkarni) - handle a no path available corner case (Daniel Wagner) - use the proper RCU aware list_add helper (Chao Leng) - bcache regression fix (Coly) - bdev->bd_size_lock IRQ fix. This will be fixed in drivers for 5.12, but for now, we'll make it IRQ safe (Damien) - null_blk zoned init fix (Damien) - add_partition() error handling fix (Dinghao) - s390 dasd kobject fix (Jan) - nbd fix for freezing queue while adding connections (Josef) - tag queueing regression fix (Ming) - revert of a patch that inadvertently meant that we regressed write performance on raid (Maxim)" * tag 'block-5.11-2021-01-29' of git://git.kernel.dk/linux-block: null_blk: cleanup zoned mode initialization nvme-core: use list_add_tail_rcu instead of list_add_tail for nvme_init_ns_head nvme-multipath: Early exit if no path is available nvme-pci: add the DISABLE_WRITE_ZEROES quirk for a SPCC device bcache: only check feature sets when sb->version >= BCACHE_SB_VERSION_CDEV_WITH_FEATURES block: fix bd_size_lock use blk-cgroup: Use cond_resched() when destroy blkgs Revert "block: simplify set_init_blocksize" to regain lost performance nbd: freeze the queue while we're adding connections s390/dasd: Fix inconsistent kobject removal block: Fix an error handling in add_partition blk-mq: test QUEUE_FLAG_HCTX_ACTIVE for sbitmap_shared in hctx_may_queue
2021-01-29null_blk: cleanup zoned mode initializationDamien Le Moal
To avoid potential compilation problems, replaced the badly written MB_TO_SECTS() macro (missing parenthesis around the argument use) with the inline function mb_to_sects(). And while at it, simplify the calculation of the total number of zones of the device using the round_up() macro. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-28Merge tag 'for-linus-5.11-rc6-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: - A fix for a regression introduced in 5.11 resulting in Xen dom0 having problems to correctly initialize Xenstore. - A fix for avoiding WARN splats when booting as Xen dom0 with CONFIG_AMD_MEM_ENCRYPT enabled due to a missing trap handler for the #VC exception (even if the handler should never be called). - A fix for the Xen bklfront driver adapting to the correct but unexpected behavior of new qemu. * tag 'for-linus-5.11-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: x86/xen: avoid warning in Xen pv guest with CONFIG_AMD_MEM_ENCRYPT enabled xen: Fix XenStore initialisation for XS_LOCAL xen-blkfront: allow discard-* nodes to be optional
2021-01-27drbd: remove drbd_req_make_private_bioChristoph Hellwig
Open code drbd_req_make_private_bio in the two callers to prepare for further changes. Also don't bother to initialize bi_next as the bio code already does that that. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Acked-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-27drbd: remove bio_alloc_drbdChristoph Hellwig
Given that drbd_md_io_bio_set is initialized during module initialization and the module fails to load if the initialization fails there is no need to fall back to plain bio_alloc. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Acked-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-26rsxx: remove redundant NULL checkYang Li
Fix below warnings reported by coccicheck: ./drivers/block/rsxx/dma.c:948:3-8: WARNING: NULL check before some freeing functions is not needed. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <abaci-bugfix@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-26zram: fix NULL check before some freeing functions is not neededTian Tao
fixed the below warning: /drivers/block/zram/zram_drv.c:534:2-8: WARNING: NULL check before some freeing functions is not needed. Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-26drbd: remove unused argument from drbd_request_prepare and __drbd_make_requestGuoqing Jiang
We can remove start_jif since it is not used by drbd_request_prepare, then remove it from __drbd_make_request further. Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Lars Ellenberg <lars.ellenberg@linbit.com> Cc: drbd-dev@lists.linbit.com Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-26mtip32xx: prefer pcie_capability_read_word()Bjorn Helgaas
Replace pci_read_config_word() with pcie_capability_read_word(). pcie_capability_read_word() takes care of a few special cases when reading the PCIe capability. See 8c0d3a02c130 ("PCI: Add accessors for PCI Express Capability"). Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-26mtip32xx: use PCI #defines instead of numbersBjorn Helgaas
Use PCI #defines for PCIe Device Control register values instead of hard-coding bit positions. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-26loop: scale loop device by introducing per device lockPavel Tatashin
Currently, loop device has only one global lock: loop_ctl_mutex. This becomes hot in scenarios where many loop devices are used. Scale it by introducing per-device lock: lo_mutex that protects modifications of all fields in struct loop_device. Keep loop_ctl_mutex to protect global data: loop_index_idr, loop_lookup, loop_add. The new lock ordering requirement is that loop_ctl_mutex must be taken before lo_mutex. Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com> Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> Reviewed-by: Petr Vorel <pvorel@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-26xen-blkfront: allow discard-* nodes to be optionalRoger Pau Monne
This is inline with the specification described in blkif.h: * discard-granularity: should be set to the physical block size if node is not present. * discard-alignment, discard-secure: should be set to 0 if node not present. This was detected as QEMU would only create the discard-granularity node but not discard-alignment, and thus the setup done in blkfront_setup_discard would fail. Fix blkfront_setup_discard to not fail on missing nodes, and also fix blkif_set_queue_limits to set the discard granularity to the physical block size if none is specified in xenbus. Fixes: ed30bf317c5ce ('xen-blkfront: Handle discard requests.') Reported-by: Arthur Borsboom <arthurborsboom@gmail.com> Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Juergen Gross <jgross@suse.com> Tested-By: Arthur Borsboom <arthurborsboom@gmail.com> Link: https://lore.kernel.org/r/20210119105727.95173-1-roger.pau@citrix.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-01-25nbd: freeze the queue while we're adding connectionsJosef Bacik
When setting up a device, we can krealloc the config->socks array to add new sockets to the configuration. However if we happen to get a IO request in at this point even though we aren't setup we could hit a UAF, as we deref config->socks without any locking, assuming that the configuration was setup already and that ->socks is safe to access it as we have a reference on the configuration. But there's nothing really preventing IO from occurring at this point of the device setup, we don't want to incur the overhead of a lock to access ->socks when it will never change while the device is running. To fix this UAF scenario simply freeze the queue if we are adding sockets. This will protect us from this particular case without adding any additional overhead for the normal running case. Cc: stable@vger.kernel.org Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-24block: remove unnecessary argument from blk_execute_rqGuoqing Jiang
We can remove 'q' from blk_execute_rq as well after the previous change in blk_execute_rq_nowait. And more importantly it never really was needed to start with given that we can trivial derive it from struct request. Cc: linux-scsi@vger.kernel.org Cc: virtualization@lists.linux-foundation.org Cc: linux-ide@vger.kernel.org Cc: linux-mmc@vger.kernel.org Cc: linux-nvme@lists.infradead.org Cc: linux-nfs@vger.kernel.org Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-24block: remove unnecessary argument from blk_execute_rq_nowaitGuoqing Jiang
The 'q' is not used since commit a1ce35fa4985 ("block: remove dead elevator code"), also update the comment of the function. And more importantly it never really was needed to start with given that we can trivial derive it from struct request. Cc: target-devel@vger.kernel.org Cc: linux-scsi@vger.kernel.org Cc: virtualization@lists.linux-foundation.org Cc: linux-ide@vger.kernel.org Cc: linux-mmc@vger.kernel.org Cc: linux-nvme@lists.infradead.org Cc: linux-nfs@vger.kernel.org Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-24block: store a block_device pointer in struct bioChristoph Hellwig
Replace the gendisk pointer in struct bio with a pointer to the newly improved struct block device. From that the gendisk can be trivially accessed with an extra indirection, but it also allows to directly look up all information related to partition remapping. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-24brd: remove the end of device check in brd_do_bvecChristoph Hellwig
The block layer already checks for this conditions in bio_check_eod before calling the driver. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-24rbd: remove the ->set_read_only methodChristoph Hellwig
Now that the hardware read-only state can't be changed by the BLKROSET ioctl, the code in this method is not required anymore. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-08block/rnbd-clt: avoid module unload race with close confirmationJack Wang
We had kernel panic, it is caused by unload module and last close confirmation. call trace: [1196029.743127] free_sess+0x15/0x50 [rtrs_client] [1196029.743128] rtrs_clt_close+0x4c/0x70 [rtrs_client] [1196029.743129] ? rnbd_clt_unmap_device+0x1b0/0x1b0 [rnbd_client] [1196029.743130] close_rtrs+0x25/0x50 [rnbd_client] [1196029.743131] rnbd_client_exit+0x93/0xb99 [rnbd_client] [1196029.743132] __x64_sys_delete_module+0x190/0x260 And in the crashdump confirmation kworker is also running. PID: 6943 TASK: ffff9e2ac8098000 CPU: 4 COMMAND: "kworker/4:2" #0 [ffffb206cf337c30] __schedule at ffffffff9f93f891 #1 [ffffb206cf337cc8] schedule at ffffffff9f93fe98 #2 [ffffb206cf337cd0] schedule_timeout at ffffffff9f943938 #3 [ffffb206cf337d50] wait_for_completion at ffffffff9f9410a7 #4 [ffffb206cf337da0] __flush_work at ffffffff9f08ce0e #5 [ffffb206cf337e20] rtrs_clt_close_conns at ffffffffc0d5f668 [rtrs_client] #6 [ffffb206cf337e48] rtrs_clt_close at ffffffffc0d5f801 [rtrs_client] #7 [ffffb206cf337e68] close_rtrs at ffffffffc0d26255 [rnbd_client] #8 [ffffb206cf337e78] free_sess at ffffffffc0d262ad [rnbd_client] #9 [ffffb206cf337e88] rnbd_clt_put_dev at ffffffffc0d266a7 [rnbd_client] The problem is both code path try to close same session, which lead to panic. To fix it, just skip the sess if the refcount already drop to 0. Fixes: f7a7a5c228d4 ("block/rnbd: client: main functionality") Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com> Reviewed-by: Gioh Kim <gi-oh.kim@cloud.ionos.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-08block/rnbd: Adding name to the Contributors ListSwapnil Ingle
Adding name to the Contributors List Signed-off-by: Swapnil Ingle <ingleswapnil@gmail.com> Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Acked-by: Danil Kipnis <danil.kipnis@cloud.ionos.com> Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-08block/rnbd-clt: Fix sg table use after freeGuoqing Jiang
Since dynamically allocate sglist is used for rnbd_iu, we can't free sg table after send_usr_msg since the callback function (cqe.done) could still access the sglist. Otherwise KASAN reports UAF issue: [ 4856.600257] BUG: KASAN: use-after-free in dma_direct_unmap_sg+0x53/0x290 [ 4856.600772] Read of size 4 at addr ffff888206af3a98 by task swapper/1/0 [ 4856.601729] CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: G W 5.10.0-pserver #5.10.0-1+feature+linux+next+20201214.1025+0910d71 [ 4856.601748] Hardware name: Supermicro Super Server/X11DDW-L, BIOS 3.3 02/21/2020 [ 4856.601766] Call Trace: [ 4856.601785] <IRQ> [ 4856.601822] dump_stack+0x99/0xcb [ 4856.601856] ? dma_direct_unmap_sg+0x53/0x290 [ 4856.601888] print_address_description.constprop.7+0x1e/0x230 [ 4856.601913] ? freeze_kernel_threads+0x73/0x73 [ 4856.601965] ? mark_held_locks+0x29/0xa0 [ 4856.602019] ? dma_direct_unmap_sg+0x53/0x290 [ 4856.602039] ? dma_direct_unmap_sg+0x53/0x290 [ 4856.602079] kasan_report.cold.9+0x37/0x7c [ 4856.602188] ? mlx5_ib_post_recv+0x430/0x520 [mlx5_ib] [ 4856.602209] ? dma_direct_unmap_sg+0x53/0x290 [ 4856.602256] dma_direct_unmap_sg+0x53/0x290 [ 4856.602366] complete_rdma_req+0x188/0x4b0 [rtrs_client] [ 4856.602451] ? rtrs_clt_close+0x80/0x80 [rtrs_client] [ 4856.602535] ? mlx5_ib_poll_cq+0x48b/0x16e0 [mlx5_ib] [ 4856.602589] ? radix_tree_insert+0x3a0/0x3a0 [ 4856.602610] ? do_raw_spin_lock+0x119/0x1d0 [ 4856.602647] ? rwlock_bug.part.1+0x60/0x60 [ 4856.602740] rtrs_clt_rdma_done+0x3f7/0x670 [rtrs_client] [ 4856.602804] ? rtrs_clt_rdma_cm_handler+0xda0/0xda0 [rtrs_client] [ 4856.602857] ? check_flags.part.31+0x6c/0x1f0 [ 4856.602927] ? rcu_read_lock_sched_held+0xaf/0xe0 [ 4856.602963] ? rcu_read_lock_bh_held+0xc0/0xc0 [ 4856.603137] __ib_process_cq+0x10a/0x350 [ib_core] [ 4856.603309] ib_poll_handler+0x41/0x1c0 [ib_core] [ 4856.603358] irq_poll_softirq+0xe6/0x280 [ 4856.603392] ? lockdep_hardirqs_on_prepare+0x111/0x210 [ 4856.603446] __do_softirq+0x10d/0x646 [ 4856.603540] asm_call_irq_on_stack+0x12/0x20 [ 4856.603563] </IRQ> [ 4856.605096] Allocated by task 8914: [ 4856.605510] kasan_save_stack+0x19/0x40 [ 4856.605532] __kasan_kmalloc.constprop.7+0xc1/0xd0 [ 4856.605552] __kmalloc+0x155/0x320 [ 4856.605574] __sg_alloc_table+0x155/0x1c0 [ 4856.605594] sg_alloc_table+0x1f/0x50 [ 4856.605620] send_msg_sess_info+0x119/0x2e0 [rnbd_client] [ 4856.605646] remap_devs+0x71/0x210 [rnbd_client] [ 4856.605676] init_sess+0xad8/0xe10 [rtrs_client] [ 4856.605706] rtrs_clt_reconnect_work+0xd6/0x170 [rtrs_client] [ 4856.605728] process_one_work+0x521/0xa90 [ 4856.605748] worker_thread+0x65/0x5b0 [ 4856.605769] kthread+0x1f2/0x210 [ 4856.605789] ret_from_fork+0x22/0x30 [ 4856.606159] Freed by task 8914: [ 4856.606559] kasan_save_stack+0x19/0x40 [ 4856.606580] kasan_set_track+0x1c/0x30 [ 4856.606601] kasan_set_free_info+0x1b/0x30 [ 4856.606622] __kasan_slab_free+0x108/0x150 [ 4856.606642] slab_free_freelist_hook+0x64/0x190 [ 4856.606661] kfree+0xe2/0x650 [ 4856.606681] __sg_free_table+0xa4/0x100 [ 4856.606707] send_msg_sess_info+0x1d6/0x2e0 [rnbd_client] [ 4856.606733] remap_devs+0x71/0x210 [rnbd_client] [ 4856.606763] init_sess+0xad8/0xe10 [rtrs_client] [ 4856.606792] rtrs_clt_reconnect_work+0xd6/0x170 [rtrs_client] [ 4856.606813] process_one_work+0x521/0xa90 [ 4856.606833] worker_thread+0x65/0x5b0 [ 4856.606853] kthread+0x1f2/0x210 [ 4856.606872] ret_from_fork+0x22/0x30 The solution is to free iu's sgtable after the iu is not used anymore. And also move sg_alloc_table into rnbd_get_iu accordingly. Fixes: 5a1328d0c3a7 ("block/rnbd-clt: Dynamically allocate sglist for rnbd_iu") Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-08block/rnbd-srv: Fix use after free in rnbd_srv_sess_dev_force_closeJack Wang
KASAN detect following BUG: [ 778.215311] ================================================================== [ 778.216696] BUG: KASAN: use-after-free in rnbd_srv_sess_dev_force_close+0x38/0x60 [rnbd_server] [ 778.219037] Read of size 8 at addr ffff88b1d6516c28 by task tee/8842 [ 778.220500] CPU: 37 PID: 8842 Comm: tee Kdump: loaded Not tainted 5.10.0-pserver #5.10.0-1+feature+linux+next+20201214.1025+0910d71 [ 778.220529] Hardware name: Supermicro Super Server/X11DDW-L, BIOS 3.3 02/21/2020 [ 778.220555] Call Trace: [ 778.220609] dump_stack+0x99/0xcb [ 778.220667] ? rnbd_srv_sess_dev_force_close+0x38/0x60 [rnbd_server] [ 778.220715] print_address_description.constprop.7+0x1e/0x230 [ 778.220750] ? freeze_kernel_threads+0x73/0x73 [ 778.220896] ? rnbd_srv_sess_dev_force_close+0x38/0x60 [rnbd_server] [ 778.220932] ? rnbd_srv_sess_dev_force_close+0x38/0x60 [rnbd_server] [ 778.220994] kasan_report.cold.9+0x37/0x7c [ 778.221066] ? kobject_put+0x80/0x270 [ 778.221102] ? rnbd_srv_sess_dev_force_close+0x38/0x60 [rnbd_server] [ 778.221184] rnbd_srv_sess_dev_force_close+0x38/0x60 [rnbd_server] [ 778.221240] rnbd_srv_dev_session_force_close_store+0x6a/0xc0 [rnbd_server] [ 778.221304] ? sysfs_file_ops+0x90/0x90 [ 778.221353] kernfs_fop_write+0x141/0x240 [ 778.221451] vfs_write+0x142/0x4d0 [ 778.221553] ksys_write+0xc0/0x160 [ 778.221602] ? __ia32_sys_read+0x50/0x50 [ 778.221684] ? lockdep_hardirqs_on_prepare+0x13d/0x210 [ 778.221718] ? syscall_enter_from_user_mode+0x1c/0x50 [ 778.221821] do_syscall_64+0x33/0x40 [ 778.221862] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 778.221896] RIP: 0033:0x7f4affdd9504 [ 778.221928] Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b3 0f 1f 80 00 00 00 00 48 8d 05 f9 61 0d 00 8b 00 85 c0 75 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 41 54 49 89 d4 55 48 89 f5 53 [ 778.221956] RSP: 002b:00007fffebb36b28 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 778.222011] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f4affdd9504 [ 778.222038] RDX: 0000000000000002 RSI: 00007fffebb36c50 RDI: 0000000000000003 [ 778.222066] RBP: 00007fffebb36c50 R08: 0000556a151aa600 R09: 00007f4affeb1540 [ 778.222094] R10: fffffffffffffc19 R11: 0000000000000246 R12: 0000556a151aa520 [ 778.222121] R13: 0000000000000002 R14: 00007f4affea6760 R15: 0000000000000002 [ 778.222764] Allocated by task 3212: [ 778.223285] kasan_save_stack+0x19/0x40 [ 778.223316] __kasan_kmalloc.constprop.7+0xc1/0xd0 [ 778.223347] kmem_cache_alloc_trace+0x186/0x350 [ 778.223382] rnbd_srv_rdma_ev+0xf16/0x1690 [rnbd_server] [ 778.223422] process_io_req+0x4d1/0x670 [rtrs_server] [ 778.223573] __ib_process_cq+0x10a/0x350 [ib_core] [ 778.223709] ib_cq_poll_work+0x31/0xb0 [ib_core] [ 778.223743] process_one_work+0x521/0xa90 [ 778.223773] worker_thread+0x65/0x5b0 [ 778.223802] kthread+0x1f2/0x210 [ 778.223833] ret_from_fork+0x22/0x30 [ 778.224296] Freed by task 8842: [ 778.224800] kasan_save_stack+0x19/0x40 [ 778.224829] kasan_set_track+0x1c/0x30 [ 778.224860] kasan_set_free_info+0x1b/0x30 [ 778.224889] __kasan_slab_free+0x108/0x150 [ 778.224919] slab_free_freelist_hook+0x64/0x190 [ 778.224947] kfree+0xe2/0x650 [ 778.224982] rnbd_destroy_sess_dev+0x2fa/0x3b0 [rnbd_server] [ 778.225011] kobject_put+0xda/0x270 [ 778.225046] rnbd_srv_sess_dev_force_close+0x30/0x60 [rnbd_server] [ 778.225081] rnbd_srv_dev_session_force_close_store+0x6a/0xc0 [rnbd_server] [ 778.225111] kernfs_fop_write+0x141/0x240 [ 778.225140] vfs_write+0x142/0x4d0 [ 778.225169] ksys_write+0xc0/0x160 [ 778.225198] do_syscall_64+0x33/0x40 [ 778.225227] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 778.226506] The buggy address belongs to the object at ffff88b1d6516c00 which belongs to the cache kmalloc-512 of size 512 [ 778.227464] The buggy address is located 40 bytes inside of 512-byte region [ffff88b1d6516c00, ffff88b1d6516e00) The problem is in the sess_dev release function we call rnbd_destroy_sess_dev, and could free the sess_dev already, but we still set the keep_id in rnbd_srv_sess_dev_force_close, which lead to use after free. To fix it, move the keep_id before the sysfs removal, and cache the rnbd_srv_session for lock accessing, Fixes: 786998050cbc ("block/rnbd-srv: close a mapped device from server side.") Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com> Reviewed-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-08block/rnbd: Select SG_POOL for RNBD_CLIENTJack Wang
lkp reboot following build error: drivers/block/rnbd/rnbd-clt.c: In function 'rnbd_softirq_done_fn': >> drivers/block/rnbd/rnbd-clt.c:387:2: error: implicit declaration of function 'sg_free_table_chained' [-Werror=implicit-function-declaration] 387 | sg_free_table_chained(&iu->sgt, RNBD_INLINE_SG_CNT); | ^~~~~~~~~~~~~~~~~~~~~ The reason is CONFIG_SG_POOL is not enabled in the config, to avoid such failure, select SG_POOL in Kconfig for RNBD_CLIENT. Fixes: 5a1328d0c3a7 ("block/rnbd-clt: Dynamically allocate sglist for rnbd_iu") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-03block: rsxx: select CONFIG_CRC32Arnd Bergmann
Without crc32, the driver fails to link: arm-linux-gnueabi-ld: drivers/block/rsxx/config.o: in function `rsxx_load_config': config.c:(.text+0x124): undefined reference to `crc32_le' Fixes: 8722ff8cdbfa ("block: IBM RamSan 70/80 device driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-24Merge tag 'block-5.11-2020-12-23' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "A few stragglers in here, but mostly just straight fixes. In particular: - Set of rnbd fixes for issues around changes for the merge window (Gioh, Jack, Md Haris Iqbal) - iocost tracepoint addition (Baolin) - Copyright/maintainers update (Christoph) - Remove old blk-mq fast path CPU warning (Daniel) - loop max_part fix (Josh) - Remote IPI threaded IRQ fix (Sebastian) - dasd stable fixes (Stefan) - bcache merge window fixup and style fixup (Yi, Zheng)" * tag 'block-5.11-2020-12-23' of git://git.kernel.dk/linux-block: md/bcache: convert comma to semicolon bcache:remove a superfluous check in register_bcache block: update some copyrights block: remove a pointless self-reference in block_dev.c MAINTAINERS: add fs/block_dev.c to the block section blk-mq: Don't complete on a remote CPU in force threaded mode s390/dasd: fix list corruption of lcu list s390/dasd: fix list corruption of pavgroup group list s390/dasd: prevent inconsistent LCU device data s390/dasd: fix hanging device offline processing blk-iocost: Add iocg idle state tracepoint nbd: Respect max_part for all partition scans block/rnbd-clt: Does not request pdu to rtrs-clt block/rnbd-clt: Dynamically allocate sglist for rnbd_iu block/rnbd: Set write-back cache and fua same to the target device block/rnbd: Fix typos block/rnbd-srv: Protect dev session sysfs removal block/rnbd-clt: Fix possible memleak block/rnbd-clt: Get rid of warning regarding size argument in strlcpy blk-mq: Remove 'running from the wrong CPU' warning
2020-12-19Merge tag 'for-linus-5.11-rc1b-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull more xen updates from Juergen Gross: "Some minor cleanup patches and a small series disentangling some Xen related Kconfig options" * tag 'for-linus-5.11-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: Kconfig: remove X86_64 depends from XEN_512GB xen/manage: Fix fall-through warnings for Clang xen-blkfront: Fix fall-through warnings for Clang xen: remove trailing semicolon in macro definition xen: Kconfig: nest Xen guest options xen: Remove Xen PVH/PVHVM dependency on PCI x86/xen: Convert to DEFINE_SHOW_ATTRIBUTE
2020-12-17Merge tag 'powerpc-5.11-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Switch to the generic C VDSO, as well as some cleanups of our VDSO setup/handling code. - Support for KUAP (Kernel User Access Prevention) on systems using the hashed page table MMU, using memory protection keys. - Better handling of PowerVM SMT8 systems where all threads of a core do not share an L2, allowing the scheduler to make better scheduling decisions. - Further improvements to our machine check handling. - Show registers when unwinding interrupt frames during stack traces. - Improvements to our pseries (PowerVM) partition migration code. - Several series from Christophe refactoring and cleaning up various parts of the 32-bit code. - Other smaller features, fixes & cleanups. Thanks to: Alan Modra, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Ard Biesheuvel, Athira Rajeev, Balamuruhan S, Bill Wendling, Cédric Le Goater, Christophe Leroy, Christophe Lombard, Colin Ian King, Daniel Axtens, David Hildenbrand, Frederic Barrat, Ganesh Goudar, Gautham R. Shenoy, Geert Uytterhoeven, Giuseppe Sacco, Greg Kurz, Harish, Jan Kratochvil, Jordan Niethe, Kaixu Xia, Laurent Dufour, Leonardo Bras, Madhavan Srinivasan, Mahesh Salgaonkar, Mathieu Desnoyers, Nathan Lynch, Nicholas Piggin, Oleg Nesterov, Oliver O'Halloran, Oscar Salvador, Po-Hsu Lin, Qian Cai, Qinglang Miao, Randy Dunlap, Ravi Bangoria, Sachin Sant, Sandipan Das, Sebastian Andrzej Siewior , Segher Boessenkool, Srikar Dronamraju, Tyrel Datwyler, Uwe Kleine-König, Vincent Stehlé, Youling Tang, and Zhang Xiaoxu. * tag 'powerpc-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (304 commits) powerpc/32s: Fix cleanup_cpu_mmu_context() compile bug powerpc: Add config fragment for disabling -Werror powerpc/configs: Add ppc64le_allnoconfig target powerpc/powernv: Rate limit opal-elog read failure message powerpc/pseries/memhotplug: Quieten some DLPAR operations powerpc/ps3: use dma_mapping_error() powerpc: force inlining of csum_partial() to avoid multiple csum_partial() with GCC10 powerpc/perf: Fix Threshold Event Counter Multiplier width for P10 powerpc/mm: Fix hugetlb_free_pmd_range() and hugetlb_free_pud_range() KVM: PPC: Book3S HV: Fix mask size for emulated msgsndp KVM: PPC: fix comparison to bool warning KVM: PPC: Book3S: Assign boolean values to a bool variable powerpc: Inline setup_kup() powerpc/64s: Mark the kuap/kuep functions non __init KVM: PPC: Book3S HV: XIVE: Add a comment regarding VP numbering powerpc/xive: Improve error reporting of OPAL calls powerpc/xive: Simplify xive_do_source_eoi() powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_EOI_FW powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_MASK_FW powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_SHIFT_BUG ...
generated by cgit v1.2.3 (git 2.46.0) at 2026-05-16 19:04:57 +0000