| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit fac51482577d5e05bbb0efa8d602a3c2111098bf ]
With CONFIG_OF enabled on x86, we get the following error on boot:
"
Failed to find cpu0 device node
Unable to detect cache hierarchy from DT for CPU 0
"
and the cacheinfo fails to get populated in the corresponding sysfs
entries. This is because cache_setup_of_node looks for of_node for
setting up the shared cpu_map without checking that it's already
populated in the architecture specific callback.
In order to indicate that the shared cpu_map is already populated, this
patch introduces a boolean `cpu_map_populated` in struct cpu_cacheinfo
that can be used by the generic code to skip cache_shared_cpu_map_setup.
This patch also sets that boolean for x86.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
|
|
[ Upstream commit f97238373b8662a6d580e204df2e7bcbfa43e27a ]
Accessing more than one byte from a symbol declared simply 'char' is undefined
behavior, as reported by UBSAN:
UBSAN: Undefined behaviour in drivers/base/power/trace.c:178:18
load of address ffffffff8203fc78 with insufficient space
for an object of type 'char'
Avoid this by declaring the symbols as arrays.
Signed-off-by: Eric Biggers <ebiggers3@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
|
|
[ Upstream commit 5a244727f428a06634f22bb890e78024ab0c89f3 ]
The isa_driver structure for an isa_bus device is stored in the device
platform_data member of the respective device structure. This
platform_data member may be reset to NULL if isa_driver match callback
for the device fails, indicating a device unsupported by the ISA driver.
This patch fixes a possible NULL pointer dereference if one of the
isa_driver callbacks to attempted for an unsupported device. This error
should not occur in practice since ISA devices are typically manually
configured and loaded by the users, but we may as well prevent this
error from popping up for the 0day testers.
Fixes: a5117ba7da37 ("[PATCH] Driver model: add ISA bus")
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
|
|
[ Upstream commit bf563b01c2895a4bfd1a29cc5abc67fe706ecffd ]
When printing the driver_override parameter when it is 4095 and 4094 bytes
long, the printing code would access invalid memory because we need count+1
bytes for printing.
Reject driver_override values of these lengths in driver_override_store().
This is in close analogy to commit 4efe874aace5 ("PCI: Don't read past the
end of sysfs "driver_override" buffer") from Sasha Levin.
Fixes: 3d713e0e382e ("driver core: platform: add device binding path 'driver_override'")
Cc: stable@vger.kernel.org # v3.17+
Signed-off-by: Nicolai Stange <nstange@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
|
|
[ Upstream commit 0f9b011d3321ca1079c7a46c18cb1956fbdb7bcb ]
The .release function of driver_ktype is 'driver_release()'.
This function frees the container_of this kobject.
So, this memory must not be freed explicitly in the error handling path of
'bus_add_driver()'. Otherwise a double free will occur.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
|
|
present
[ Upstream commit 975e83cfb8dc16e7a2fdc58188c77c0c605876c2 ]
If the genpd->attach_dev or genpd->power_on fails, genpd_dev_pm_attach
may return -EPROBE_DEFER initially. However genpd_alloc_dev_data sets
the PM domain for the device unconditionally.
When subsequent attempts are made to call genpd_dev_pm_attach, it may
return -EEXISTS checking dev->pm_domain without re-attempting to call
attach_dev or power_on.
platform_drv_probe then attempts to call drv->probe as the return value
-EEXIST != -EPROBE_DEFER, which may end up in a situation where the
device is accessed without it's power domain switched on.
Fixes: f104e1e5ef57 (PM / Domains: Re-order initialization of generic_pm_domain_data)
Cc: 4.4+ <stable@vger.kernel.org> # v4.4+
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
|
|
[ Upstream commit b556b15dc04e9b9b98790f04c21acf5e24f994b2 ]
of_genpd_del_provider() iterates over list of domain provides and
removes matching element thus it has to use safe version of list
iteration.
Fixes: aa42240ab254 (PM / Domains: Add generic OF-based PM domain look-up)
Cc: 3.19+ <stable@vger.kernel.org> # 3.19+
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
|
|
[ Upstream commit c6e83cac3eda5f7dd32ee1453df2f7abb5c6cd46 ]
pm_genpd_remove_subdomain() iterates over domain's master_links list and
removes matching element thus it has to use safe version of list
iteration.
Fixes: f721889ff65a ("PM / Domains: Support for generic I/O PM domains (v8)")
Cc: 3.1+ <stable@vger.kernel.org> # 3.1+
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
|
|
[ Upstream commit 2ca30331c156ca9e97643ad05dd8930b8fe78b01 ]
In the current code, if the user accidentally writes a bogus command to
this sysfs file, then we set the latency tolerance to an uninitialized
variable.
Fixes: 2d984ad132a8 (PM / QoS: Introcuce latency tolerance device PM QoS type)
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: 3.15+ <stable@vger.kernel.org> # 3.15+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
|
|
[ Upstream commit f77af15165847406b15d8f70c382c4cb15846b2a ]
The TPM class has some common shutdown code that must be executed for
all drivers. This adds some needed functionality for that.
Signed-off-by: Josh Zimmerman <joshz@google.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
Fixes: 74d6b3ceaa17 ("tpm: fix suspend/resume paths for TPM 2.0")
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
|
|
[ Upstream commit 6265539776a0810b7ce6398c27866ddb9c6bd154 ]
The driver_override implementation is susceptible to race condition when
different threads are reading vs storing a different driver override.
Add locking to avoid race condition.
Fixes: 3d713e0e382e ("driver core: platform: add device binding path 'driver_override'")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Salido <salidoa@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
|
|
[ Upstream commit a9306a63631493afc75893a4ac405d4e1cbae6aa ]
The might_sleep_if() assertions in __pm_runtime_idle(),
__pm_runtime_suspend() and __pm_runtime_resume() may generate
false-positive warnings in some situations. For example, that
happens if a nested pm_runtime_get_sync()/pm_runtime_put() pair
is executed with disabled interrupts within an outer
pm_runtime_get_sync()/pm_runtime_put() section for the same device.
[Generally, pm_runtime_get_sync() may sleep, so it should not be
called with disabled interrupts, but in this particular case the
previous pm_runtime_get_sync() guarantees that the device will not
be suspended, so the inner pm_runtime_get_sync() will return
immediately after incrementing the device's usage counter.]
That started to happen in the i915 driver in 4.10-rc, leading to
the following splat:
BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:1032
in_atomic(): 1, irqs_disabled(): 0, pid: 1500, name: Xorg
1 lock held by Xorg/1500:
#0: (&dev->struct_mutex){+.+.+.}, at:
[<ffffffffa0680c13>] i915_mutex_lock_interruptible+0x43/0x140 [i915]
CPU: 0 PID: 1500 Comm: Xorg Not tainted
Call Trace:
dump_stack+0x85/0xc2
___might_sleep+0x196/0x260
__might_sleep+0x53/0xb0
__pm_runtime_resume+0x7a/0x90
intel_runtime_pm_get+0x25/0x90 [i915]
aliasing_gtt_bind_vma+0xaa/0xf0 [i915]
i915_vma_bind+0xaf/0x1e0 [i915]
i915_gem_execbuffer_relocate_entry+0x513/0x6f0 [i915]
i915_gem_execbuffer_relocate_vma.isra.34+0x188/0x250 [i915]
? trace_hardirqs_on+0xd/0x10
? i915_gem_execbuffer_reserve_vma.isra.31+0x152/0x1f0 [i915]
? i915_gem_execbuffer_reserve.isra.32+0x372/0x3a0 [i915]
i915_gem_do_execbuffer.isra.38+0xa70/0x1a40 [i915]
? __might_fault+0x4e/0xb0
i915_gem_execbuffer2+0xc5/0x260 [i915]
? __might_fault+0x4e/0xb0
drm_ioctl+0x206/0x450 [drm]
? i915_gem_execbuffer+0x340/0x340 [i915]
? __fget+0x5/0x200
do_vfs_ioctl+0x91/0x6f0
? __fget+0x111/0x200
? __fget+0x5/0x200
SyS_ioctl+0x79/0x90
entry_SYSCALL_64_fastpath+0x23/0xc6
even though the code triggering it is correct.
Unfortunately, the might_sleep_if() assertions in question are
too coarse-grained to cover such cases correctly, so make them
a bit less sensitive in order to avoid the false-positives.
Reported-and-tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
|
|
[ Upstream commit 2e700f8d85975f516ccaad821278c1fe66b2cc98 ]
When you use the firmware usermode helper fallback with a timeout value set to a
value greater than INT_MAX (2147483647) a cast overflow issue causes the
timeout value to go negative and breaks all usermode helper loading. This
regression was introduced through commit 68ff2a00dbf5 ("firmware_loader:
handle timeout via wait_for_completion_interruptible_timeout()") on kernel
v4.0.
The firmware_class drivers relies on the firmware usermode helper
fallback as a mechanism to look for firmware if the direct filesystem
search failed only if:
a) You've enabled CONFIG_FW_LOADER_USER_HELPER_FALLBACK (not many distros):
Then all of these callers will rely on the fallback mechanism in case
the firmware is not found through an initial direct filesystem lookup:
o request_firmware()
o request_firmware_into_buf()
o request_firmware_nowait()
b) If you've only enabled CONFIG_FW_LOADER_USER_HELPER (most distros):
Then only callers using request_firmware_nowait() with the second
argument set to false, this explicitly is requesting the UMH firmware
fallback to be relied on in case the first filesystem lookup fails.
Using Coccinelle SmPL grammar we have identified only two drivers
explicitly requesting the UMH firmware fallback mechanism:
- drivers/firmware/dell_rbu.c
- drivers/leds/leds-lp55xx-common.c
Since most distributions only enable CONFIG_FW_LOADER_USER_HELPER the
biggest impact of this regression are users of the dell_rbu and
leds-lp55xx-common device driver which required the UMH to find their
respective needed firmwares.
The default timeout for the UMH is set to 60 seconds always, as of
commit 68ff2a00dbf5 ("firmware_loader: handle timeout via
wait_for_completion_interruptible_timeout()") the timeout was bumped
to MAX_JIFFY_OFFSET ((LONG_MAX >> 1)-1). Additionally the MAX_JIFFY_OFFSET
value was also used if the timeout was configured by a user to 0.
The following works:
echo 2147483647 > /sys/class/firmware/timeout
But both of the following set the timeout to MAX_JIFFY_OFFSET even if
we display 0 back to userspace:
echo 2147483648 > /sys/class/firmware/timeout
cat /sys/class/firmware/timeout
0
echo 0> /sys/class/firmware/timeout
cat /sys/class/firmware/timeout
0
A max value of INT_MAX (2147483647) seconds is therefore implicit due to the
another cast with simple_strtol().
This fixes the secondary cast (the first one is simple_strtol() but its an
issue only by forcing an implicit limit) by re-using the timeout variable and
only setting retval in appropriate cases.
Lastly worth noting systemd had ripped out the UMH firmware fallback
mechanism from udev since udev 2014 via commit be2ea723b1d023b3d
("udev: remove userspace firmware loading support"), so as of systemd v217.
Signed-off-by: Yves-Alexis Perez <corsac@corsac.net>
Fixes: 68ff2a00dbf5 "firmware_loader: handle timeout via wait_for_completion_interruptible_timeout()"
Cc: Luis R. Rodriguez <mcgrof@kernel.org>
Cc: Ming Lei <ming.lei@canonical.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
Acked-by: Luis R. Rodriguez <mcgrof@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
[mcgrof@kernel.org: gave commit log a whole lot of love]
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
|
|
[ Upstream commit 7e1b1fc4dabd6ec8e28baa0708866e13fa93c9b3 ]
Modules which register drivers via standard path (driver_register) in
parallel can cause a warning:
WARNING: CPU: 2 PID: 3492 at ../fs/sysfs/dir.c:31 sysfs_warn_dup+0x62/0x80
sysfs: cannot create duplicate filename '/module/saa7146/drivers'
Modules linked in: hexium_gemini(+) mxb(+) ...
...
Call Trace:
...
[<ffffffff812e63a2>] sysfs_warn_dup+0x62/0x80
[<ffffffff812e6487>] sysfs_create_dir_ns+0x77/0x90
[<ffffffff8140f2c4>] kobject_add_internal+0xb4/0x340
[<ffffffff8140f5b8>] kobject_add+0x68/0xb0
[<ffffffff8140f631>] kobject_create_and_add+0x31/0x70
[<ffffffff8157a703>] module_add_driver+0xc3/0xd0
[<ffffffff8155e5d4>] bus_add_driver+0x154/0x280
[<ffffffff815604c0>] driver_register+0x60/0xe0
[<ffffffff8145bed0>] __pci_register_driver+0x60/0x70
[<ffffffffa0273e14>] saa7146_register_extension+0x64/0x90 [saa7146]
[<ffffffffa0033011>] hexium_init_module+0x11/0x1000 [hexium_gemini]
...
As can be (mostly) seen, driver_register causes this call sequence:
-> bus_add_driver
-> module_add_driver
-> module_create_drivers_dir
The last one creates "drivers" directory in /sys/module/<...>. When
this is done in parallel, the directory is attempted to be created
twice at the same time.
This can be easily reproduced by loading mxb and hexium_gemini in
parallel:
while :; do
modprobe mxb &
modprobe hexium_gemini
wait
rmmod mxb hexium_gemini saa7146_vv saa7146
done
saa7146 calls pci_register_driver for both mxb and hexium_gemini,
which means /sys/module/saa7146/drivers is to be created for both of
them.
Fix this by a new mutex in module_create_drivers_dir which makes the
test-and-create "drivers" dir atomic.
I inverted the condition and removed 'return' to avoid multiple
unlocks or a goto.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Fixes: fe480a2675ed (Modules: only add drivers/ direcory if needed)
Cc: v2.6.21+ <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
|
|
[ Upstream commit 3a17fb329da68cb00558721aff876a80bba2fdb9 ]
Grygorii Strashko reports:
The PM runtime will be left disabled for the device if its
.suspend_late() callback fails and async suspend is not allowed
for this device. In this case device will not be added in
dpm_late_early_list and dpm_resume_early() will ignore this
device, as result PM runtime will be disabled for it forever
(side effect: after 8 subsequent failures for the same device
the PM runtime will be reenabled due to disable_depth overflow).
To fix this problem, add devices to dpm_late_early_list regardless
of whether or not device_suspend_late() returns errors for them.
That will ensure failures in there to be handled consistently for
all devices regardless of their async suspend/resume status.
Reported-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
|
|
[ Upstream commit 0ae3aeefabbeef26294e7a349b51f1c761d46c9f ]
As pm_runtime_set_active() may fail because the device's parent isn't
active, we can end up executing the ->runtime_resume() callback for the
device when it isn't allowed.
Fix this by invoking pm_runtime_set_active() before running the callback
and let's also deal with the error code.
Fixes: 37f204164dfb (PM: Add pm_runtime_suspend|resume_force functions)
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: 3.15+ <stable@vger.kernel.org> # 3.15+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
|
|
[ Upstream commit dec8e8f6e6504aa3496c0f7cc10c756bb0e10f44 ]
Specifically for the case of reads that use the Extended Register
Read Long command, a multi-byte read operation is broken up into
8-byte chunks. However the call to spmi_ext_register_readl() is
incorrectly passing 'val_size', which if greater than 8 will
always fail. The argument should instead be 'len'.
Fixes: c9afbb05a9ff ("regmap: spmi: support base and extended register spaces")
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
|
|
commit 2110d70c5e58326a10e93cfefdc0b3686e2ada12 upstream.
Philip Müller reported a hang when booting 32-bit 4.1 kernel on an AMD
box. A fragment of the splat was enough to pinpoint the issue:
task: f58e0000 ti: f58e8000 task.ti: f58e800
EIP: 0060:[<c135a903>] EFLAGS: 00010206 CPU: 0
EIP is at free_cache_attributes+0x83/0xd0
EAX: 00000001 EBX: f589d46c ECX: 00000090 EDX: 360c2000
ESI: 00000000 EDI: c1724a80 EBP: f58e9ec0 ESP: f58e9ea0
DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
CR0: 8005003b CR2: 000000ac CR3: 01731000 CR4: 000006d0
cache_shared_cpu_map_setup() did check sibling CPUs cacheinfo descriptor
while the respective teardown path cache_shared_cpu_map_remove() didn't.
Fix that.
>From tglx's version: to be on the safe side, move the cacheinfo
descriptor check to free_cache_attributes(), thus cleaning up the
hotplug path a little and making this even more robust.
Reported-and-tested-by: Philip Müller <philm@manjaro.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-kernel@vger.kernel.org
Cc: manjaro-dev@manjaro.org
Cc: Philip Müller <philm@manjaro.org>
Link: https://lkml.kernel.org/r/55B47BB8.6080202@manjaro.org
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 176fc2d5770a0990eebff903ba680d2edd32e718 upstream.
The in kernel snprintf() will conveniently return the actual length of
the printed string even if not given an output beffer at all so just do
that rather than relying on the user to pass in a suitable buffer,
ensuring that we don't need to worry if the buffer was truncated due to
the size of the buffer passed in.
Reported-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b763ec17ac762470eec5be8ebcc43e4f8b2c2b82 upstream.
If a read is attempted which is smaller than the line length then we may
underflow the subtraction we're doing with the unsigned size_t type so
move some of the calculation to be additions on the right hand side
instead in order to avoid this.
Reported-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ecc87eed7beeb50c0be0b73322d62135277ea2b0 upstream.
In device_add_property_set() we check pset parameter for a NULL, but few lines
later we do a pointer arithmetic without check that will crash kernel in the
set_secondary_fwnode().
Here we check if pset parameter is NULL and return immediately.
Fixes: 16ba08d5c9ec (device property: Introduce firmware node type for platform data)
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 04697858d89e4bf2650364f8d6956e2554e8ef88 upstream.
Tony Luck found on his setup, if memory block size 512M will cause crash
during booting.
BUG: unable to handle kernel paging request at ffffea0074000020
IP: get_nid_for_pfn+0x17/0x40
PGD 128ffcb067 PUD 128ffc9067 PMD 0
Oops: 0000 [#1] SMP
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.2.0-rc8 #1
...
Call Trace:
? register_mem_sect_under_node+0x66/0xe0
register_one_node+0x17b/0x240
? pci_iommu_alloc+0x6e/0x6e
topology_init+0x3c/0x95
do_one_initcall+0xcd/0x1f0
The system has non continuous RAM address:
BIOS-e820: [mem 0x0000001300000000-0x0000001cffffffff] usable
BIOS-e820: [mem 0x0000001d70000000-0x0000001ec7ffefff] usable
BIOS-e820: [mem 0x0000001f00000000-0x0000002bffffffff] usable
BIOS-e820: [mem 0x0000002c18000000-0x0000002d6fffefff] usable
BIOS-e820: [mem 0x0000002e00000000-0x00000039ffffffff] usable
So there are start sections in memory block not present. For example:
memory block : [0x2c18000000, 0x2c20000000) 512M
first three sections are not present.
The current register_mem_sect_under_node() assume first section is
present, but memory block section number range [start_section_nr,
end_section_nr] would include not present section.
For arch that support vmemmap, we don't setup memmap for struct page
area within not present sections area.
So skip the pfn range that belong to absent section.
[akpm@linux-foundation.org: simplification]
[rientjes@google.com: more simplification]
Fixes: bdee237c0343 ("x86: mm: Use 2GB memory block size on large memory x86-64 systems")
Fixes: 982792c782ef ("x86, mm: probe memory block size for generic x86 64bit")
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: David Rientjes <rientjes@google.com>
Reported-by: Tony Luck <tony.luck@intel.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Cc: Greg KH <greg@kroah.com>
Cc: Ingo Molnar <mingo@elte.hu>
Tested-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7f5dcaf1fdf289767a126a0a5cc3ef39b5254b06 upstream.
The unregister path of platform_device is broken. On registration, it
will register all resources with either a parent already set, or
type==IORESOURCE_{IO,MEM}. However, on unregister it will release
everything with type==IORESOURCE_{IO,MEM}, but ignore the others. There
are also cases where resources don't get registered in the first place,
like with devices created by of_platform_populate()*.
Fix the unregister path to be symmetrical with the register path by
checking the parent pointer instead of the type field to decide which
resources to unregister. This is safe because the upshot of the
registration path algorithm is that registered resources have a parent
pointer, and non-registered resources do not.
* It can be argued that of_platform_populate() should be registering
it's resources, and they argument has some merit. However, there are
quite a few platforms that end up broken if we try to do that due to
overlapping resources in the device tree. Until that is fixed, we need
to solve the immediate problem.
Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: Rob Herring <robh@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Grant Likely <grant.likely@linaro.org>
Tested-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 64526370d11ce8868ca495723d595b61e8697fbf upstream.
Currently, devres_get() passes devres_free() the pointer to devres,
but devres_free() should be given with the pointer to resource data.
Fixes: 9ac7849e35f7 ("devres: device resource management")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f4745a92781b872455f32feb01d1dce92aefcb6c upstream.
Static analysis by cppcheck found an issue that was recently introduced by
commit 471f7707b6f0b1 ("PM / clock_ops: make __pm_clk_enable more generic")
where a return status in ret was not being initialised and garbage
being returned when ce->status >= PCE_STATUS_ERROR.
The fact that ret is not being checked by the caller and that
ret is only used internally __pm_clk_enable() to check if clk_enable()
was OK means we can ignore returning it instead turn
__pm_clk_enable() into function with a void return.
Fixes: 471f7707b6f0b1 ("PM / clock_ops: make __pm_clk_enable more generic")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8ef9724bf9718af81cfc5132253372f79c71b7e2 upstream.
When inserting a new register into a block, the present bit map size is
increased using krealloc. krealloc does not clear the additionally
allocated memory, leaving it filled with random values. Result is that
some registers are considered cached even though this is not the case.
Fix the problem by clearing the additionally allocated memory. Also, if
the bitmap size does not increase, do not reallocate the bitmap at all
to reduce overhead.
Fixes: 3f4ff561bc88 ("regmap: rbtree: Make cache_present bitmap per node")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6f957724b94cb19f5c1c97efd01dd4df8ced323c upstream.
The firmware class uevent function accessed the "fw_priv->buf" buffer
without the proper locking and testing for NULL. This is an old bug
(looks like it goes back to 2012 and commit 1244691c73b2: "firmware
loader: introduce firmware_buf"), but for some reason it's triggering
only now in 4.2-rc1.
Shuah Khan is trying to bisect what it is that causes this to trigger
more easily, but in the meantime let's just fix the bug since others are
hitting it too (at least Ingo reports having seen it as well).
Reported-and-tested-by: Shuah Khan <shuahkh@osg.samsung.com>
Acked-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3fc3a0be0dab352e065d1dad7d3f81953ed0d4bc upstream.
In the final iteration of commit 245bd6f6af8a62a2 ("PM / clock_ops: Add
pm_clk_add_clk()"), a refcount increment was added by Grygorii Strashko.
However, the accompanying IS_ERR() check operates on the wrong clock
pointer, which is always zero at this point, i.e. not an error.
This may lead to a NULL pointer dereference later, when __clk_get()
tries to dereference an error pointer.
Check the passed clock pointer instead to fix this.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Fixes: 245bd6f6af8a62a2 ("PM / clock_ops: Add pm_clk_add_clk()")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 921cc29473a0d7c109105c1876ddb432f4a4be7d upstream.
The way the mask is generated in regmap_field_init() is wrong.
Indeed, a field initialized with msb = 31 and lsb = 0 provokes a shift
overflow while calculating the mask field.
On some 32 bits architectures, such as x86, the generated mask is 0,
instead of the expected 0xffffffff.
This patch uses GENMASK() to fix the problem, as this macro is already safe
regarding shift overflow.
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 15b8d2c41fe5839582029f65c5f7004db451cc2b upstream.
In big endian mode regmap_bulk_read gives incorrect data
for byte reads.
This is because memcpy of a single byte from an address
after full word read gives different results when
endianness differs. ie. we get little-end in LE and big-end in BE.
Signed-off-by: Arun Chandran <achandran@mvista.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
On some simulators like GEM5, caches may not be simulated. In those
cases, the cache levels and leaves will be zero and will result in
following exception:
Unable to handle kernel NULL pointer dereference at virtual address 0040
pgd = ffffffc0008fa000
[00000040] *pgd=00000009f6807003, *pud=00000009f6807003,
*pmd=00000009f6808003, *pte=006000002c010707
Internal error: Oops: 96000005 [#1] PREEMPT SMP
Modules linked in:
CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.1.0-rc5 #198
task: ffffffc9768a0000 ti: ffffffc9768a8000 task.ti: ffffffc9768a8000
PC is at detect_cache_attributes+0x98/0x2c8
LR is at detect_cache_attributes+0x88/0x2c8
kcalloc(0) returns a special value ZERO_SIZE_PTR which is non-NULL value
but results in fault only on any attempt to dereferencing it. So
checking for the non-NULL pointer will not suffice.
This patch checks for non-zero cache leaf nodes and returns error if
there are no cache leaves in detect_cache_attributes.
Cc: <stable@vger.kernel.org> # 3.19.x
Cc: Will Deacon <will.deacon@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reported-by: William Wang <william.wang@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 5590f3196b29 ("drivers/core/of: Add symlink to device-tree from
devices with an OF node") adds the symlink `of_node` for each device
pointing to it's device tree node while creating/initialising it.
However the devicetree sysfs is created and setup in of_init which is
executed at core_initcall level. For all the devices created before
of_init, the following error is thrown:
"Error -2(-ENOENT) creating of_node link"
Like many other components in driver model, initialize the sysfs support
for OF/devicetree from driver_init so that it's ready before any devices
are created.
Fixes: 5590f3196b29 ("drivers/core/of: Add symlink to device-tree from
devices with an OF node")
Suggested-by: Rob Herring <robh+dt@kernel.org>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Robert Schwebel <r.schwebel@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull fourth vfs update from Al Viro:
"d_inode() annotations from David Howells (sat in for-next since before
the beginning of merge window) + four assorted fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
RCU pathwalk breakage when running into a symlink overmounting something
fix I_DIO_WAKEUP definition
direct-io: only inc/dec inode->i_dio_count for file systems
fs/9p: fix readdir()
VFS: assorted d_backing_inode() annotations
VFS: fs/inode.c helpers: d_inode() annotations
VFS: fs/cachefiles: d_backing_inode() annotations
VFS: fs library helpers: d_inode() annotations
VFS: assorted weird filesystems: d_inode() annotations
VFS: normal filesystems (and lustre): d_inode() annotations
VFS: security/: d_inode() annotations
VFS: security/: d_backing_inode() annotations
VFS: net/: d_inode() annotations
VFS: net/unix: d_backing_inode() annotations
VFS: kernel/: d_inode() annotations
VFS: audit: d_backing_inode() annotations
VFS: Fix up some ->d_inode accesses in the chelsio driver
VFS: Cachefiles should perform fs modifications on the top layer only
VFS: AF_UNIX sockets should call mknod on the top layer only
|
|
The seq_printf return value, because it's frequently misused,
will eventually be converted to void.
See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to
seq_has_overflowed() and make public")
Signed-off-by: Joe Perches <joe@perches.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Len Brown <len.brown@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI updates from Rafael Wysocki:
"These are mostly fixes and cleanups all over, although there are a few
items that sort of fall into the new feature category.
First off, we have new callbacks for PM domains that should help us to
handle some issues related to device initialization in a better way.
There also is some consolidation in the unified device properties API
area allowing us to use that inferface for accessing data coming from
platform initialization code in addition to firmware-provided data.
We have some new device/CPU IDs in a few drivers, support for new
chips and a new cpufreq driver too.
Specifics:
- Generic PM domains support update including new PM domain callbacks
to handle device initialization better (Russell King, Rafael J
Wysocki, Kevin Hilman)
- Unified device properties API update including a new mechanism for
accessing data provided by platform initialization code (Rafael J
Wysocki, Adrian Hunter)
- ARM cpuidle update including ARM32/ARM64 handling consolidation
(Daniel Lezcano)
- intel_idle update including support for the Silvermont Core in the
Baytrail SOC and for the Airmont Core in the Cherrytrail and
Braswell SOCs (Len Brown, Mathias Krause)
- New cpufreq driver for Hisilicon ACPU (Leo Yan)
- intel_pstate update including support for the Knights Landing chip
(Dasaratharaman Chandramouli, Kristen Carlson Accardi)
- QorIQ cpufreq driver update (Tang Yuantian, Arnd Bergmann)
- powernv cpufreq driver update (Shilpasri G Bhat)
- devfreq update including Tegra support changes (Tomeu Vizoso,
MyungJoo Ham, Chanwoo Choi)
- powercap RAPL (Running-Average Power Limit) driver update including
support for Intel Broadwell server chips (Jacob Pan, Mathias Krause)
- ACPI device enumeration update related to the handling of the
special PRP0001 device ID allowing DT-style 'compatible' property
to be used for ACPI device identification (Rafael J Wysocki)
- ACPI EC driver update including limited _DEP support (Lan Tianyu,
Lv Zheng)
- ACPI backlight driver update including a new mechanism to allow
native backlight handling to be forced on non-Windows 8 systems and
a new quirk for Lenovo Ideapad Z570 (Aaron Lu, Hans de Goede)
- New Windows Vista compatibility quirk for Sony VGN-SR19XN (Chen Yu)
- Assorted ACPI fixes and cleanups (Aaron Lu, Martin Kepplinger,
Masanari Iida, Mika Westerberg, Nan Li, Rafael J Wysocki)
- Fixes related to suspend-to-idle for the iTCO watchdog driver and
the ACPI core system suspend/resume code (Rafael J Wysocki, Chen Yu)
- PM tracing support for the suspend phase of system suspend/resume
transitions (Zhonghui Fu)
- Configurable delay for the system suspend/resume testing facility
(Brian Norris)
- PNP subsystem cleanups (Peter Huewe, Rafael J Wysocki)"
* tag 'pm+acpi-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (74 commits)
ACPI / scan: Fix NULL pointer dereference in acpi_companion_match()
ACPI / scan: Rework modalias creation when "compatible" is present
intel_idle: mark cpu id array as __initconst
powercap / RAPL: mark rapl_ids array as __initconst
powercap / RAPL: add ID for Broadwell server
intel_pstate: Knights Landing support
intel_pstate: remove MSR test
cpufreq: fix qoriq uniprocessor build
ACPI / scan: Take the PRP0001 position in the list of IDs into account
ACPI / scan: Simplify acpi_match_device()
ACPI / scan: Generalize of_compatible matching
device property: Introduce firmware node type for platform data
device property: Make it possible to use secondary firmware nodes
PM / watchdog: iTCO: stop watchdog during system suspend
cpufreq: hisilicon: add acpu driver
ACPI / EC: Call acpi_walk_dep_device_list() after installing EC opregion handler
cpufreq: powernv: Report cpu frequency throttling
intel_idle: Add support for the Airmont Core in the Cherrytrail and Braswell SOCs
intel_idle: Update support for Silvermont Core in Baytrail SOC
PM / devfreq: tegra: Register governor on module init
...
|
|
There's a deadlock when concurrently hot-adding memory through the probe
interface and switching a memory block from offline to online.
When hot-adding memory via the probe interface, add_memory() first takes
mem_hotplug_begin() and then device_lock() is later taken when registering
the newly initialized memory block. This creates a lock dependency of (1)
mem_hotplug.lock (2) dev->mutex.
When switching a memory block from offline to online, dev->mutex is first
grabbed in device_online() when the write(2) transitions an existing
memory block from offline to online, and then online_pages() will take
mem_hotplug_begin().
This creates a lock inversion between mem_hotplug.lock and dev->mutex.
Vitaly reports that this deadlock can happen when kworker handling a probe
event races with systemd-udevd switching a memory block's state.
This patch requires the state transition to take mem_hotplug_begin()
before dev->mutex. Hot-adding memory via the probe interface creates a
memory block while holding mem_hotplug_begin(), there is no way to take
dev->mutex first in this case.
online_pages() and offline_pages() are only called when transitioning
memory block state. We now require that mem_hotplug_begin() is taken
before calling them -- this requires exporting the mem_hotplug_begin() and
mem_hotplug_done() to generic code. In all hot-add and hot-remove cases,
mem_hotplug_begin() is done prior to device_online(). This is all that is
needed to avoid the deadlock.
Signed-off-by: David Rientjes <rientjes@google.com>
Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zhang Zhen <zhenzhang.zhang@huawei.com>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Cc: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Use macro section_nr_to_pfn() to switch between section and pfn, instead
of open-coding it. No semantic changes.
Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here's the driver-core / kobject / lz4 tree update for 4.1-rc1.
Everything here has been in linux-next for a while with no reported
issues. It's mostly just coding style cleanups, with other minor
changes in here as well, nothing big"
* tag 'driver-core-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (32 commits)
debugfs: allow bad parent pointers to be passed in
stable_kernel_rules: Add clause about specification of kernel versions to patch.
kobject: WARN as tip when call kobject_get() to a kobject not initialized
lib/lz4: Pull out constant tables
drivers: platform: parse IRQ flags from resources
driver core: Make probe deferral more quiet
drivers/core/of: Add symlink to device-tree from devices with an OF node
device: Add dev_of_node() accessor
drivers: base: fw: fix ret value when loading fw
firmware: Avoid manual device_create_file() calls
drivers/base: cacheinfo: validate device node for all the caches
drivers/base: use tabs where possible in code indentation
driver core: add missing blank line after declaration
drivers: base: node: Delete space after pointer declaration
drivers: base: memory: Use tabs instead of spaces
firmware_class: Fix whitespace and indentation
drivers: base: dma-mapping: Erase blank space after pointer
drivers: base: class: Add a blank line after declarations
attribute_container: fix missing blank lines after declarations
drivers: base: memory: Fix switch indent
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap update from Mark Brown:
"Just one patch for regmap this time around, a change from Steven
Rostedt to prettify the way we're making the regmap internal header
available to the trace events (it turns out that the trace subsystem
doesn't actually need to be in trace/events)"
* tag 'regmap-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: Move tracing header into drivers/base/regmap
|
|
* pm-sleep:
PM / watchdog: iTCO: stop watchdog during system suspend
PM / sleep: add pm-trace support for suspending phase
PM / sleep: add configurable delay for pm_test
* pm-domains:
PM / domains: avoid potential oops in pm_genpd_remove_device()
PM / domains: factor out code to get the generic PM domain from a struct device
PM / domains: quieten down generic pm domains
PM / Domains: Sync runtime PM status with genpd after probe
driver core / PM: Add PM domain callbacks for device setup/cleanup
MAINTAINERS: add entry for Generic PM domains (genpd)
|
|
* device-properties:
device property: Introduce firmware node type for platform data
device property: Make it possible to use secondary firmware nodes
driver core: Implement device property accessors through fwnode ones
driver core: property: Update fwnode_property_read_string_array()
driver core: Add comments about returning array counts
ACPI: Introduce has_acpi_companion()
driver core / ACPI: Represent ACPI companions using fwnode_handle
|
|
|
|
Introduce data structures and code allowing "built-in" properties
to be associated with devices in such a way that they will be used
by the device_property_* API if no proper firmware node (neither DT
nor ACPI) is present for the given device.
Each property is to be represented by a property_entry structure.
An array of property_entry structures (terminated with a null
entry) can be pointed to by the properties field of struct
property_set that can be added as a firmware node to a struct
device using device_add_property_set(). That will cause the
device_property_* API to use that property_set as the source
of properties if the given device does not have a DT node or
an ACPI companion device object associated with it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a secondary pointer to struct fwnode_handle so as to make it
possible for a device to have two firmware nodes associated with
it at the same time, for example, an ACPI node and a node with
a set of properties provided by platform initialization code.
In the future that will allow device property lookup to fall back
from the primary firmware node to the secondary one if the given
property is not present there to make it easier to provide defaults
for device properties used by device drivers.
Introduce two helper routines, set_primary_fwnode() and
set_secondary_fwnode() allowing callers to add a primary/secondary
firmware node to the given device in such a way that
(1) If there's only one firmware node for that device, it will be
pointed to by the device's firmware node pointer.
(2) If both the primary and secondary firmware nodes are present,
the primary one will be pointed to by the device's firmware
node pointer, while the secondary one will be pointed to by the
primary node's secondary pointer.
(3) If one of these nodes is removed (by calling one of the new
nelpers with NULL as the second argument), the other one will
be preserved.
Make ACPI use set_primary_fwnode() for attaching its firmware nodes
to devices.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Now that the ACPI companions of devices are pointed to by the fwnode
field in struct device, the device_property_*() accessor functions
can be modified to use their fwnode_property_*() counterparts
internally with minimum extra overhead in the IS_ENABLED(CONFIG_OF)
case, so make those changes.
This allows us to get rid of the rather ugly DEV_PROP_READ_ARRAY()
macro among other things.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
Commit 5c0acf3b4f96 (driver core: Add comments about returning array
counts) forgot to update fwnode_property_read_string_array() along
the lines of device_property_read_string_array(), although it did
change the kerneldoc comment of it. Fix that.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This fixes a regression from the net subsystem:
After commit d52fdbb735c36a209f36a628d40ca9185b349ba7
"smc91x: retrieve IRQ and trigger flags in a modern way"
a regression would appear on some legacy platforms such
as the ARM PXA Zylonite that specify IRQ resources like
this:
static struct resource r = {
.start = X,
.end = X,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
};
The previous code would retrieve the resource and parse
the high edge setting in the SMC91x driver, a use pattern
that means every driver specifying an IRQ flag from a
static resource need to parse resource flags and apply
them at runtime.
As we switched the code to use IRQ descriptors to retrieve
the the trigger type like this:
irqd_get_trigger_type(irq_get_irq_data(...));
the code would work for new platforms using e.g. device
tree as the backing irq descriptor would have its flags
properly set, whereas this kind of oldstyle static
resources at no point assign the trigger flags to the
corresponding IRQ descriptor.
To make the behaviour identical on modern device tree
and legacy static platform data platforms, modify
platform_get_irq() to assign the trigger flags to the
irq descriptor when a client looks up an IRQ from static
resources.
Fixes: d52fdbb735c3 ("smc91x: retrieve IRQ and trigger flags in a modern way")
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently probe deferral prints a message every time a device requests
deferral at info severity (which is displayed by default). This can have
an impact on system boot times with serial consoles and is generally quite
noisy.
Since subsystems and drivers should already be logging the specific reason
for probe deferral in order to aid users in understanding problems the
messages from the driver core should be redundant lower the severity of
the messages printed, cutting down on the volume of output on the console.
This does mean that if the drivers and subsystems aren't doing a good job
we get no output on the console by default. Ideally we'd be able to arrange
to print if nothing else printed, though that's a little fun. Even better
would be to come up with a mechanism that explicitly does dependencies so
we don't have to keep polling and erroring.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
