| Age | Commit message (Collapse) | Author |
|---|
|
The added fsession does not prevent running on those architectures, that
haven't added fsession support.
For example, try to run fsession tests on arm64:
test_fsession_basic:PASS:fsession_test__open_and_load 0 nsec
test_fsession_basic:PASS:fsession_attach 0 nsec
check_result:FAIL:test_run_opts err unexpected error: -14 (errno 14)
In order to prevent such errors, add bpf_jit_supports_fsession() to guard
those architectures.
Fixes: 2d419c44658f ("bpf: add fsession support")
Acked-by: Puranjay Mohan <puranjay@kernel.org>
Tested-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260131144950.16294-2-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The BSS_DECRYPTED section that gets emitted into .bss will be empty if
CONFIG_AMD_MEM_ENCRYPT is not defined. However, due to the fact that it
is injected into .bss rather than emitted as a separate section, the
2 MiB alignment that it specifies is still taken into account
unconditionally, pushing .bss out to the next 2 MiB boundary, leaving
a gap that is never freed.
So only emit a non-empty BSS_DECRYPTED section if it is going to be
used. In that case, it would still be nice to free the padding, but
that is left for later.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20260108092526.28586-23-ardb@kernel.org
|
|
Restricted pointers ("%pK") were never meant to be used
through printk(). They can acquire sleeping locks in atomic contexts.
Switch to %px over the more secure %p as this usage is a debugging aid,
gated behind CONFIG_DEBUG_VIRTUAL and used by WARN().
Link: https://lore.kernel.org/lkml/20250113171731-dc10e3c1-da64-4af0-b767-7c7070468023@linutronix.de/
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
On big-endian systems the 32-bit low and high halves need to be swapped
for the underlying assembly implementation to work correctly.
Fixes: fd1d362600e2 ("ARM: implement memset32 & memset64")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
This patch exploits the new xflag PKEY_XFLAG_NOCLEARKEY from the pkey
layer. So now by default all the paes algorithms refuse the use of
clear key material ("clear key tokens") in the setkey function with
-EINVAL.
With a new kernel module parameter "clrkey" this behavior can be
controlled. By default clrkey is 'N' but for testing purpose on module
load a true value (1, 'Y') may be given to accept clear key tokens.
Note that during selftest clear keys are always used and thus the
xflag PKEY_XFLAG_NOCLEARKEY is NOT set as long as the algorithm is in
a larval state indicated by crypto_skcipher_tested() returning false.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch exploits the new xflag PKEY_XFLAG_NOCLEARKEY from the pkey
layer. So now by default the phmac refuses the use of clear key
material ("clear key tokens") in the setkey function with
-EINVAL.
With a new kernel module parameter "clrkey" this behavior can be
controlled. By default clrkey is 'N' but for testing purpose on module
load a true value (1, 'Y') may be given to accept clear key tokens.
Note that during selftest clear keys are always used and thus the
xflag PKEY_XFLAG_NOCLEARKEY is NOT set as long as the algorithm is in
a larval state indicated by crypto_ahash_tested() returning false.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Introduce a new xflag PKEY_XFLAG_NOCLEARKEY which when given refuses
the conversion of "clear key tokens" to protected key material.
Some algorithms (PAES, PHMAC) have the need to construct "clear key
tokens" to be used during selftest. But in general these algorithms
should only support clear key material for testing purpose. So now the
algorithm implementation can signal via xflag PKEY_XFLAG_NOCLEARKEY
that a conversion of clear key material to protected key is not
acceptable and thus the pkey layer (usually one of the handler
modules) refuses clear key material with -EINVAL.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
- Correct the RISC-V compat.h COMPAT_UTS_MACHINE architecture name
- Avoid printing a false warning message on kernels with the SiFive and
MIPS errata compiled in
- Address a few warnings generated by sparse in the signal handling
code
- Fix a comment typo
* tag 'riscv-for-linus-6.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: compat: fix COMPAT_UTS_MACHINE definition
errata/sifive: remove unreliable warn_miss_errata
riscv: fix minor typo in syscall.h comment
riscv: signal: fix some warnings reported by sparse
|
|
Some PCI devices have PCI_MSI_FLAGS_64BIT in the MSI capability, but
implement less than 64 address bits. This breaks on platforms where such
a device is assigned an MSI address higher than what's supported.
Currently, no_64bit_msi bit is set for these devices, meaning that only
32-bit MSI addresses are allowed for them. However, on some platforms the
MSI doorbell address is above the 32-bit limit but within the addressable
range of the device.
As a first step to enable MSI on those combinations of devices and
platforms, convert the boolean no_64bit_msi flag to a DMA mask and fixup
the affected usage sites:
- no_64bit_msi = 1 -> msi_addr_mask = DMA_BIT_MASK(32)
- no_64bit_msi = 0 -> msi_addr_mask = DMA_BIT_MASK(64)
- if (no_64bit_msi) -> if (msi_addr_mask < DMA_BIT_MASK(64))
Since no values other than DMA_BIT_MASK(32) and DMA_BIT_MASK(64) are used,
this is functionally equivalent.
This prepares for changing the binary decision between 32 and 64 bit to a
DMA mask based decision which allows to support systems which have a DMA
address space less than 64bit but a MSI doorbell address above the 32-bit
limit.
[ tglx: Massaged changelog ]
Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Brett Creeley <brett.creeley@amd.com> # ionic
Reviewed-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: Takashi Iwai <tiwai@suse.de> # sound
Link: https://patch.msgid.link/20260129-pci-msi-addr-mask-v4-1-70da998f2750@iscas.ac.cn
|
|
Mahe reported missing function from stack trace on top of kprobe
multi program. The missing function is the very first one in the
stacktrace, the one that the bpf program is attached to.
# bpftrace -e 'kprobe:__x64_sys_newuname* { print(kstack)}'
Attaching 1 probe...
do_syscall_64+134
entry_SYSCALL_64_after_hwframe+118
('*' is used for kprobe_multi attachment)
The reason is that the previous change (the Fixes commit) fixed
stack unwind for tracepoint, but removed attached function address
from the stack trace on top of kprobe multi programs, which I also
overlooked in the related test (check following patch).
The tracepoint and kprobe_multi have different stack setup, but use
same unwind path. I think it's better to keep the previous change,
which fixed tracepoint unwind and instead change the kprobe multi
unwind as explained below.
The bpf program stack unwind calls perf_callchain_kernel for kernel
portion and it follows two unwind paths based on X86_EFLAGS_FIXED
bit in pt_regs.flags.
When the bit set we unwind from stack represented by pt_regs argument,
otherwise we unwind currently executed stack up to 'first_frame'
boundary.
The 'first_frame' value is taken from regs.rsp value, but ftrace_caller
and ftrace_regs_caller (ftrace trampoline) functions set the regs.rsp
to the previous stack frame, so we skip the attached function entry.
If we switch kprobe_multi unwind to use the X86_EFLAGS_FIXED bit,
we set the start of the unwind to the attached function address.
As another benefit we also cut extra unwind cycles needed to reach
the 'first_frame' boundary.
The speedup can be measured with trigger bench for kprobe_multi
program and stacktrace support.
- trigger bench with stacktrace on current code:
kprobe-multi : 0.810 ± 0.001M/s
kretprobe-multi: 0.808 ± 0.001M/s
- and with the fix:
kprobe-multi : 1.264 ± 0.001M/s
kretprobe-multi: 1.401 ± 0.002M/s
With the fix, the entry probe stacktrace:
# bpftrace -e 'kprobe:__x64_sys_newuname* { print(kstack)}'
Attaching 1 probe...
__x64_sys_newuname+9
do_syscall_64+134
entry_SYSCALL_64_after_hwframe+118
The return probe skips the attached function, because it's no longer
on the stack at the point of the unwind and this way is the same how
standard kretprobe works.
# bpftrace -e 'kretprobe:__x64_sys_newuname* { print(kstack)}'
Attaching 1 probe...
do_syscall_64+134
entry_SYSCALL_64_after_hwframe+118
Fixes: 6d08340d1e35 ("Revert "perf/x86: Always store regs->ip in perf_callchain_kernel()"")
Reported-by: Mahe Tardy <mahe.tardy@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/bpf/20260126211837.472802-3-jolsa@kernel.org
|
|
The previous change (Fixes commit) messed up the rsp register value,
which is wrong because it's already adjusted with FRAME_SIZE, we need
the original rsp value.
This change does not affect fprobe current kernel unwind, the !perf_hw_regs
path perf_callchain_kernel:
if (perf_hw_regs(regs)) {
if (perf_callchain_store(entry, regs->ip))
return;
unwind_start(&state, current, regs, NULL);
} else {
unwind_start(&state, current, NULL, (void *)regs->sp);
}
which uses pt_regs.sp as first_frame boundary (FRAME_SIZE shift makes
no difference, unwind stil stops at the right frame).
This change fixes the other path when we want to unwind directly from
pt_regs sp/fp/ip state, which is coming in following change.
Fixes: 20a0bc10272f ("x86/fgraph,bpf: Fix stack ORC unwind from kprobe_multi return probe")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/bpf/20260126211837.472802-2-jolsa@kernel.org
|
|
Add two flags for KVM_CAP_X2APIC_API to allow userspace to control support
for Suppress EOI Broadcasts when using a split IRQCHIP (I/O APIC emulated
by userspace), which KVM completely mishandles. When x2APIC support was
first added, KVM incorrectly advertised and "enabled" Suppress EOI
Broadcast, without fully supporting the I/O APIC side of the equation,
i.e. without adding directed EOI to KVM's in-kernel I/O APIC.
That flaw was carried over to split IRQCHIP support, i.e. KVM advertised
support for Suppress EOI Broadcasts irrespective of whether or not the
userspace I/O APIC implementation supported directed EOIs. Even worse,
KVM didn't actually suppress EOI broadcasts, i.e. userspace VMMs without
support for directed EOI came to rely on the "spurious" broadcasts.
KVM "fixed" the in-kernel I/O APIC implementation by completely disabling
support for Suppress EOI Broadcasts in commit 0bcc3fb95b97 ("KVM: lapic:
stop advertising DIRECTED_EOI when in-kernel IOAPIC is in use"), but
didn't do anything to remedy userspace I/O APIC implementations.
KVM's bogus handling of Suppress EOI Broadcast is problematic when the
guest relies on interrupts being masked in the I/O APIC until well after
the initial local APIC EOI. E.g. Windows with Credential Guard enabled
handles interrupts in the following order:
1. Interrupt for L2 arrives.
2. L1 APIC EOIs the interrupt.
3. L1 resumes L2 and injects the interrupt.
4. L2 EOIs after servicing.
5. L1 performs the I/O APIC EOI.
Because KVM EOIs the I/O APIC at step #2, the guest can get an interrupt
storm, e.g. if the IRQ line is still asserted and userspace reacts to the
EOI by re-injecting the IRQ, because the guest doesn't de-assert the line
until step #4, and doesn't expect the interrupt to be re-enabled until
step #5.
Unfortunately, simply "fixing" the bug isn't an option, as KVM has no way
of knowing if the userspace I/O APIC supports directed EOIs, i.e.
suppressing EOI broadcasts would result in interrupts being stuck masked
in the userspace I/O APIC due to step #5 being ignored by userspace. And
fully disabling support for Suppress EOI Broadcast is also undesirable, as
picking up the fix would require a guest reboot, *and* more importantly
would change the virtual CPU model exposed to the guest without any buy-in
from userspace.
Add KVM_X2APIC_ENABLE_SUPPRESS_EOI_BROADCAST and
KVM_X2APIC_DISABLE_SUPPRESS_EOI_BROADCAST flags to allow userspace to
explicitly enable or disable support for Suppress EOI Broadcasts. This
gives userspace control over the virtual CPU model exposed to the guest,
as KVM should never have enabled support for Suppress EOI Broadcast without
userspace opt-in. Not setting either flag will result in legacy quirky
behavior for backward compatibility.
Disallow fully enabling SUPPRESS_EOI_BROADCAST when using an in-kernel
I/O APIC, as KVM's history/support is just as tragic. E.g. it's not clear
that commit c806a6ad35bf ("KVM: x86: call irq notifiers with directed EOI")
was entirely correct, i.e. it may have simply papered over the lack of
Directed EOI emulation in the I/O APIC.
Note, Suppress EOI Broadcasts is defined only in Intel's SDM, not in AMD's
APM. But the bit is writable on some AMD CPUs, e.g. Turin, and KVM's ABI
is to support Directed EOI (KVM's name) irrespective of guest CPU vendor.
Fixes: 7543a635aa09 ("KVM: x86: Add KVM exit for IOAPIC EOIs")
Closes: https://lore.kernel.org/kvm/7D497EF1-607D-4D37-98E7-DAF95F099342@nutanix.com
Cc: stable@vger.kernel.org
Suggested-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Khushit Shah <khushit.shah@nutanix.com>
Link: https://patch.msgid.link/20260123125657.3384063-1-khushit.shah@nutanix.com
[sean: clean up minor formatting goofs and fix a comment typo]
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add a flag to track when KVM is actively configuring its CPU caps, and
WARN if a cap is set or cleared if KVM isn't in its configuration stage.
Modifying CPU caps after {svm,vmx}_set_cpu_caps() can be fatal to KVM, as
vendor setup code expects the CPU caps to be frozen at that point, e.g.
will do additional configuration based on the caps.
Rename kvm_set_cpu_caps() to kvm_initialize_cpu_caps() to pair with the
new "finalize", and to make it more obvious that KVM's CPU caps aren't
fully configured within the function.
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Link: https://patch.msgid.link/20260128014310.3255561-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
When kvm-intel.ko refuses to load due to a mismatched VMCS config, print
all mismatching offsets+values to make it easier to debug goofs during
development, and to make it at least feasible to triage failures that
occur during production. E.g. if a physical core is flaky or is running
with the "wrong" microcode patch loaded, then a CPU can get a legitimate
mismatch even without KVM bugs.
Print the mismatches as 32-bit values as a compromise between hand coding
every field (to provide precise information) and printing individual bytes
(requires more effort to deduce the mismatch bit(s)). All fields in the
VMCS config are either 32-bit or 64-bit values, i.e. in many cases,
printing 32-bit values will be 100% precise, and in the others it's close
enough, especially when considering that MSR values are split into EDX:EAX
anyways.
E.g. on mismatch CET entry/exit controls, KVM will print:
kvm_intel: VMCS config on CPU 0 doesn't match reference config:
Offset 76 REF = 0x107fffff, CPU0 = 0x007fffff, mismatch = 0x10000000
Offset 84 REF = 0x0010f3ff, CPU0 = 0x0000f3ff, mismatch = 0x00100000
Opportunistically tweak the wording on the initial error message to say
"mismatch" instead of "inconsistent", as the VMCS config itself isn't
inconsistent, and the wording conflates the cross-CPU compatibility check
with the error_on_inconsistent_vmcs_config knob that treats inconsistent
VMCS configurations as errors (e.g. if a CPU supports CET entry controls
but no CET exit controls).
Cc: Jim Mattson <jmattson@google.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Link: https://patch.msgid.link/20260128014310.3255561-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Explicitly configure KVM's supported XSS as part of each vendor's setup
flow to fix a bug where clearing SHSTK and IBT in kvm_cpu_caps, e.g. due
to lack of CET XFEATURE support, makes kvm-intel.ko unloadable when nested
VMX is enabled, i.e. when nested=1. The late clearing results in
nested_vmx_setup_{entry,exit}_ctls() clearing VM_{ENTRY,EXIT}_LOAD_CET_STATE
when nested_vmx_setup_ctls_msrs() runs during the CPU compatibility checks,
ultimately leading to a mismatched VMCS config due to the reference config
having the CET bits set, but every CPU's "local" config having the bits
cleared.
Note, kvm_caps.supported_{xcr0,xss} are unconditionally initialized by
kvm_x86_vendor_init(), before calling into vendor code, and not referenced
between ops->hardware_setup() and their current/old location.
Fixes: 69cc3e886582 ("KVM: x86: Add XSS support for CET_KERNEL and CET_USER")
Cc: stable@vger.kernel.org
Cc: Mathias Krause <minipli@grsecurity.net>
Cc: John Allen <john.allen@amd.com>
Cc: Rick Edgecombe <rick.p.edgecombe@intel.com>
Cc: Chao Gao <chao.gao@intel.com>
Cc: Binbin Wu <binbin.wu@linux.intel.com>
Cc: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Link: https://patch.msgid.link/20260128014310.3255561-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
UAPI headers are not supposed to leak references to kconfig symbols.
These won't be set when building userspace. Hide the kconfig reference
behind 'if defined(__KERNEL__)', so it will be stripped by
headers_install.sh. The result for userspace will be the same, but the
exceptions in headers_install.sh can also be removed.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
UAPI headers are not supposed to leak references to kconfig symbols.
They are undefined there in any case. As all actual definitions of this
header are guarded behind a kconfig symbol, for userspace the header is
always identical to its asm-generic variant.
Make the custom UAPI header a kernel-internal one, so the leaks of
kconfig symbols are fixed and userspace will instead use
asm-generic/swab.h directly.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/lkml/93c55086-931a-4282-a94c-de4954047fa9@app.fastmail.com/
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The symbol PSR_ENDSTATE is pointless for userspace. Drop it from the
UAPI headers and instead inline it into the only two callers.
As as side-effect, remove a leak of an internal kconfig symbol through
the UAPI headers.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/lkml/d2ad12f2-3d65-4bef-890c-65d78a33d790@app.fastmail.com/
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Since commit 67a697e7576 ("ARC: retire ARC750 support") all supported
CPUs have the 'swape' instruction.
Always use the implementation of __arch_swabe() which uses 'swape'.
ARCH_USE_BUILTIN_BSWAP can not be used as that results on libcalls on
-mcpu=arc700.
As as side-effect, remove a leak of an internal kconfig symbol through
the UAPI headers.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/lkml/0ae2688a-5a22-405b-adaf-9b5ad712b245@app.fastmail.com/
Suggested-by: Vineet Gupta <vgupta@kernel.org>
Link: https://lore.kernel.org/lkml/a033a402-e3c5-4982-9fff-b6a4c55817ae@kernel.org/
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The Agilex devkit supports a separate eMMC daughter card. The
eMMC daughter card replaces the SDMMC slot that is on the default
daughter card and thus requires a separate board dts file.
Signed-off-by: Ng Tze Yee <tzeyee.ng@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Move dma-controller node under simple-bus node to allow bus node specific
property able to be properly defined. This is require to fulfill Agilex5
bus limitation that is limited to 40-addressable-bit.
Update the compatible string for the DMA controller nodes in the Agilex5
device tree from the generic "snps,axi-dma-1.01a" to the platform-specific
"altr,agilex5-axi-dma". Add fallback capability to ensure driver is able
to initialize properly.
This change enables the use of platform-specific features and constraints
in the driver, such as setting a 40-bit DMA addressable mask through
dma-ranges, which is required for Agilex5. It also aligns with the updated
device tree bindings and driver support for this compatible string.
Signed-off-by: Khairul Anuar Romli <khairul.anuar.romli@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
soc (simple-bus): base_fpga_region: 'ranges' is a required property
from schema $id: http://devicetree.org/schemas/simple-bus.yaml
base_fpga_region (fpga-region): $nodename:0: 'base_fpga_region' does not match
'^fpga-region(@.*|-([0-9]|[1-9][0-9]+))?$'
from schema $id: http://devicetree.org/schemas/fpga/fpga-region.yaml
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Add #address-cells and #size-cells for sram node to fix below DTB_CHECK
warnings:
socfpga_arria5_socdk.dtb: sram@ffff0000 (mmio-sram): '#size-cells' is a
required property from schema $id: http://devicetree.org/schemas/sram/sram.yaml
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
The DTS code coding style expects lowercase hex for values and unit
addresses.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
To enable SMMU integration, populate the iommus property to the ethernet
device-tree node.
Signed-off-by: Nazim Amirul <muhammad.nazim.amirul.nazle.asmade@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
The Agilex5 Modular board consists of a compute module (Agilex5 SoCFPGA)
attached to a carrier board that provides PCIe and additional system
interfaces.
Signed-off-by: Niravkumar L Rabara <niravkumarlaxmidas.rabara@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Add the `dma-coherent` property to these device nodes to inform the
kernel and DMA subsystem that the devices support hardware-managed
cache coherence.
Changes:
- Add `dma-coherent` to `cdns,hp-nfc`
- Add `dma-coherent` to both `snps,axi-dma-1.01a` instances
(dmac0, dmac1)
This aligns the Agilex5 device tree with the coherent DMA-capable
devices accordingly.
Signed-off-by: Khairul Anuar Romli <khairul.anuar.romli@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Currently the LS7A GMAC device tree node lacks a proper phy-handle
property pointing to the PHY node.
In addition, the phy-mode property specifies "rgmii" without any
internal delay information, which means the board trace needs to add 2ns
delay to the RGMII data lines; but that isn't known to happen on any
Loongson board. The ACPI-based initialization codepath, which is used on
LoongArch-based 3A5000 + 7A1000 hardwares, specifies "rgmii-id" phy
mode, which should be the one we are using.
Add the lacking phy-handle property and set proper phy-mode.
Tested on a LS3A4000_7A1000_NUC_BOARD_V2.1 board with YT8521S PHY.
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
All users of the MIPS pic32.h asm header have been migrated to
linux/platform_data/pic32.h, so let's go ahead and drop the unused asm
variant.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Use the linux/platform_data/pic32.h include instead of
asm/mach-pic32/pic32.h so that the asm variant can be dropped. This
is in preparation for allowing some drivers to be compiled on other
architectures with COMPILE_TEST enabled.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The linux/io.h include is not used, so let's drop it from pic32.h.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The pic32.h header file currently includes linux/io.h, however that
header is not actually used. The only header that's needed by this
C file is linux/types.h. Let's include it so that linux/io.h can be
dropped.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The pic32.h header includes linux/io.h, however nothing from that
include file is directly used by pic32.h. Several C files that
include pic32.h indirectly depend on linux/io.h, so let's go ahead
and add the missing include so that linux/io.h can be dropped from
pic32.h.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
CPU_HAS_LOAD_STORE_LR is not used anywhere in the kernel sources,
so drop it.
Fixes: 85c4354076ca ("MIPS: loongson32: Switch to generic core")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Keguang Zhang <keguang.zhang@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The arch definition of cpumask_of_node() cannot handle NUMA_NO_NODE - which
is a valid index - so add a check for this.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Different GIC types require the private IRQs to be initialised
differently. GICv5 is the culprit as it supports both a different
number of private IRQs, and all of these are PPIs (there are no
SGIs). Moreover, as GICv5 uses the top bits of the interrupt ID to
encode the type, the intid also needs to computed differently.
Up until now, the GIC model has been set after initialising the
private IRQs for a VCPU. Move this earlier to ensure that the GIC
model is available when configuring the private IRQs. While we're at
it, also move the setting of the in_kernel flag and implementation
revision to keep them grouped together as before.
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260128175919.3828384-7-sascha.bischoff@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The GICv5 architecture is dropping the ICC_HAPR_EL1 and ICV_HAPR_EL1
system registers. These registers were never added to the sysregs, but
the traps for them were.
Drop the trap bit from the ICH_HFGRTR_EL2 and make it Res1 as per the
upcoming GICv5 spec change. Additionally, update the EL2 setup code to
not attempt to set that bit.
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260128175919.3828384-4-sascha.bischoff@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The VGIC-v3 code relied on hand-written definitions for the
ICH_VMCR_EL2 register. This register, and the associated fields, is
now generated as part of the sysreg framework. Move to using the
generated definitions instead of the hand-written ones.
There are no functional changes as part of this change.
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260128175919.3828384-3-sascha.bischoff@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Use tab instead of whitespaces, as well as 2 minor typo fixes.
Signed-off-by: Zenghui Yu (Huawei) <zenghui.yu@linux.dev>
Link: https://patch.msgid.link/20260128075208.23024-1-zenghui.yu@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Seems that it was missed when MDCR_EL2 was first added to the trap
forwarding infrastructure. Add it back.
Fixes: cb31632c4452 ("KVM: arm64: nv: Add trap forwarding for MDCR_EL2")
Signed-off-by: Zenghui Yu (Huawei) <zenghui.yu@linux.dev>
Link: https://patch.msgid.link/20260130094435.39942-1-zenghui.yu@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The hypervisor generated wrapping key is an AES-GCM-256 symmetric key which
is stored in a non-volatile, secure, and encrypted storage called the Power
LPAR Platform KeyStore. It has policy based protections that prevent it
from being read out or exposed to the user.
Implement H_PKS_GEN_KEY, H_PKS_WRAP_OBJECT, and H_PKS_UNWRAP_OBJECT HCALLs
to enable using the PowerVM Key Wrapping Module (PKWM) as a new trust
source for trusted keys. Disallow H_PKS_READ_OBJECT, H_PKS_SIGNED_UPDATE,
and H_PKS_WRITE_OBJECT for objects with the 'wrapping key' policy set.
Capture the availability status for the H_PKS_WRAP_OBJECT interface.
Signed-off-by: Srish Srinivasan <ssrish@linux.ibm.com>
Tested-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260127145228.48320-5-ssrish@linux.ibm.com
|
|
Starting with Power11, PowerVM supports a new feature called "Key Wrapping"
that protects user secrets by wrapping them using a hypervisor generated
wrapping key. The status of this feature can be read by the
H_PKS_GET_CONFIG HCALL.
Expose the Power LPAR Platform KeyStore (PLPKS) wrapping features config
via the sysfs file /sys/firmware/plpks/config/wrapping_features.
Signed-off-by: Srish Srinivasan <ssrish@linux.ibm.com>
Tested-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260127145228.48320-4-ssrish@linux.ibm.com
|
|
The /sys/firmware/secvar/config directory represents Power LPAR Platform
KeyStore (PLPKS) configuration properties such as max_object_size, signed_
update_algorithms, supported_policies, total_size, used_space, and version.
These attributes describe the PLPKS, and not the secure boot variables
(secvars).
Create /sys/firmware/plpks directory and move the PLPKS config inside this
directory. For backwards compatibility, create a soft link from the secvar
sysfs directory to this config and emit a warning stating that the older
sysfs path has been deprecated. Separate out the plpks specific
documentation from secvar.
Signed-off-by: Srish Srinivasan <ssrish@linux.ibm.com>
Tested-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260127145228.48320-3-ssrish@linux.ibm.com
|
|
Fix issues with comments for all the applicable functions to be
consistent with kernel-doc format. Move them before the function
definition as opposed to the function prototype.
Signed-off-by: Srish Srinivasan <ssrish@linux.ibm.com>
Tested-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260127145228.48320-2-ssrish@linux.ibm.com
|
|
Cross-merge networking fixes after downstream PR (net-6.19-rc8).
No adjacent changes, conflicts:
drivers/net/ethernet/spacemit/k1_emac.c
2c84959167d64 ("net: spacemit: Check for netif_carrier_ok() in emac_stats_update()")
f66086798f91f ("net: spacemit: Remove broken flow control support")
https://lore.kernel.org/aXjAqZA3iEWD_DGM@sirena.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"16 hotfixes. 9 are cc:stable, 12 are for MM.
There's a patch series from Pratyush Yadav which fixes a few things in
the new-in-6.19 LUO memfd code.
Plus the usual shower of singletons - please see the changelogs for
details"
* tag 'mm-hotfixes-stable-2026-01-29-09-41' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
vmcoreinfo: make hwerr_data visible for debugging
mm/zone_device: reinitialize large zone device private folios
mm/mm_init: don't cond_resched() in deferred_init_memmap_chunk() if called from deferred_grow_zone()
mm/kfence: randomize the freelist on initialization
kho: kho_preserve_vmalloc(): don't return 0 when ENOMEM
kho: init alloc tags when restoring pages from reserved memory
mm: memfd_luo: restore and free memfd_luo_ser on failure
mm: memfd_luo: use memfd_alloc_file() instead of shmem_file_setup()
memfd: export alloc_file()
flex_proportions: make fprop_new_period() hardirq safe
mailmap: add entry for Viacheslav Bocharov
mm/memory-failure: teach kill_accessing_process to accept hugetlb tail page pfn
mm/memory-failure: fix missing ->mf_stats count in hugetlb poison
mm, swap: restore swap_space attr aviod kernel panic
mm/kasan: fix KASAN poisoning in vrealloc()
mm/shmem, swap: fix race of truncate and swap entry split
|
|
* for-next/misc:
arm64: mm: warn once for ioremap attempts on RAM mappings
arm64: Disable branch profiling for all arm64 code
arm64: kernel: initialize missing kexec_buf->random field
arm64: simplify arch_uprobe_xol_was_trapped return
|
|
* for-next/errata:
arm64: errata: Workaround for SI L1 downstream coherency issue
|
|
* for-next/entry:
arm64/ptrace: Return early for ptrace_report_syscall_entry() error
arm64/ptrace: Split report_syscall()
arm64: Remove unused _TIF_WORK_MASK
arm64: Avoid memcpy() for syscall_get_arguments()
syscall.h: Remove unused SYSCALL_MAX_ARGS
|
|
* for-next/cpufreq:
arm64: topology: Do not warn on missing AMU in cpuhp_topology_online()
arm64: topology: Handle AMU FIE setup on CPU hotplug
cpufreq: Add new helper function returning cpufreq policy
arm64: topology: Skip already covered CPUs when setting freq source
|
