| Age | Commit message (Collapse) | Author |
|---|
|
The generic CC_CAN_LINK detection does not handle different byte orders
or ABIs. This may lead to userprogs which are not actually runnable on
the target kernel.
Use architecture-specific logic supporting byte orders instead.
Modern 64-bit toolchains default to a n32 libc, which are not
supported by all kernel configurations, as MIPS32_N32 is optional.
On 64-bit, test for a n32 ABI libc first and fall back to o64 and
o32 if necessary.
Link: https://lore.kernel.org/lkml/20260105100507-14db55e3-aa71-48bf-a6ac-33b186bd082f@linutronix.de/
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Since commit 6e690d54cfa8 ("serial: 8250: fix return error code in
serial8250_request_std_resource()"), registering an 8250 MMIO port
without mapbase no longer works, as the resource range is derived from
mapbase/mapsize.
Populate mapbase and mapsize accordingly. Also drop ugly membase KSEG1
pointer and set UPF_IOREMAP instead, letting the 8250 core perform the
ioremap.
Fixes: 6e690d54cfa8 ("serial: 8250: fix return error code in serial8250_request_std_resource()")
Cc: stable@vger.kernel.org
Reported-by: Waldemar Brodkorb <wbx@openadk.org>
Link: https://lore.kernel.org/linux-mips/aX-d0ShTplHKZT33@waldemar-brodkorb.de/
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
On MIPS, __current_thread_info is defined as global register variable
locating in $gp, and is simply assigned with new address during kernel
relocation.
This however is broken with LLVM, which always restores $gp if it finds
$gp is clobbered in any form, including when intentionally through a
global register variable. This is against GCC's documentation[1], which
requires a callee-saved register used as global register variable not to
be restored if it's clobbered.
As a result, $gp will continue to point to the unrelocated kernel after
the epilog of relocate_kernel(), leading to an early crash in init_idle,
[ 0.000000] CPU 0 Unable to handle kernel paging request at virtual address 0000000000000000, epc == ffffffff81afada8, ra == ffffffff81afad90
[ 0.000000] Oops[#1]:
[ 0.000000] CPU: 0 UID: 0 PID: 0 Comm: swapper Tainted: G W 6.19.0-rc5-00262-gd3eeb99bbc99-dirty #188 VOLUNTARY
[ 0.000000] Tainted: [W]=WARN
[ 0.000000] Hardware name: loongson,loongson64v-4core-virtio
[ 0.000000] $ 0 : 0000000000000000 0000000000000000 0000000000000001 0000000000000000
[ 0.000000] $ 4 : ffffffff80b80ec0 ffffffff80b53d48 0000000000000000 00000000000f4240
[ 0.000000] $ 8 : 0000000000000100 ffffffff81d82f80 ffffffff81d82f80 0000000000000001
[ 0.000000] $12 : 0000000000000000 ffffffff81776f58 00000000000005da 0000000000000002
[ 0.000000] $16 : ffffffff80b80e40 0000000000000000 ffffffff80b81614 9800000005dfbe80
[ 0.000000] $20 : 00000000540000e0 ffffffff81980000 0000000000000000 ffffffff80f81c80
[ 0.000000] $24 : 0000000000000a26 ffffffff8114fb90
[ 0.000000] $28 : ffffffff80b50000 ffffffff80b53d40 0000000000000000 ffffffff81afad90
[ 0.000000] Hi : 0000000000000000
[ 0.000000] Lo : 0000000000000000
[ 0.000000] epc : ffffffff81afada8 init_idle+0x130/0x270
[ 0.000000] ra : ffffffff81afad90 init_idle+0x118/0x270
[ 0.000000] Status: 540000e2 KX SX UX KERNEL EXL
[ 0.000000] Cause : 00000008 (ExcCode 02)
[ 0.000000] BadVA : 0000000000000000
[ 0.000000] PrId : 00006305 (ICT Loongson-3)
[ 0.000000] Process swapper (pid: 0, threadinfo=(____ptrval____), task=(____ptrval____), tls=0000000000000000)
[ 0.000000] Stack : 9800000005dfbf00 ffffffff8178e950 0000000000000000 0000000000000000
[ 0.000000] 0000000000000000 ffffffff81970000 000000000000003f ffffffff810a6528
[ 0.000000] 0000000000000001 9800000005dfbe80 9800000005dfbf00 ffffffff81980000
[ 0.000000] ffffffff810a6450 ffffffff81afb6c0 0000000000000000 ffffffff810a2258
[ 0.000000] ffffffff81d82ec8 ffffffff8198d010 ffffffff81b67e80 ffffffff8197dd98
[ 0.000000] ffffffff81d81c80 ffffffff81930000 0000000000000040 0000000000000000
[ 0.000000] 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 0.000000] 0000000000000000 000000000000009e ffffffff9fc01000 0000000000000000
[ 0.000000] 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 0.000000] 0000000000000000 ffffffff81ae86dc ffffffff81b3c741 0000000000000002
[ 0.000000] ...
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffff81afada8>] init_idle+0x130/0x270
[ 0.000000] [<ffffffff81afb6c0>] sched_init+0x5c8/0x6c0
[ 0.000000] [<ffffffff81ae86dc>] start_kernel+0x27c/0x7a8
This bug has been reported to LLVM[2] and affects version from (at
least) 18 to 21. Let's work around this by using inline assembly to
assign $gp before a fix is widely available.
Cc: stable@vger.kernel.org
Link: https://gcc.gnu.org/onlinedocs/gcc-15.2.0/gcc/Global-Register-Variables.html # [1]
Link: https://github.com/llvm/llvm-project/issues/176546 # [2]
Signed-off-by: Yao Zi <me@ziyao.cc>
Acked-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The PT_RECLAIM can work on all architectures that support
MMU_GATHER_RCU_TABLE_FREE, except for those that have selected
HAVE_ARCH_TLB_REMOVE_TABLE,so make PT_RECLAIM depends on
MMU_GATHER_RCU_TABLE_FREE && !HAVE_ARCH_TLB_REMOVE_TABLE.
BTW, change PT_RECLAIM to be enabled by default, since nobody should want
to turn it off.
Link: https://lkml.kernel.org/r/83b034810935a9ff18e425b085e065bb0acb28f3.1769515122.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Magnus Lindholm <linmag7@gmail.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
CONFIG_HAVE_ARCH_TLB_REMOVE_TABLE config
For architectures that define __HAVE_ARCH_TLB_REMOVE_TABLE, the page
tables at the pmd/pud level are generally not of struct ptdesc type, and
do not have pt_rcu_head member, thus these architectures cannot support
PT_RECLAIM.
In preparation for enabling PT_RECLAIM on more architectures, convert
__HAVE_ARCH_TLB_REMOVE_TABLE to CONFIG_HAVE_ARCH_TLB_REMOVE_TABLE config,
so that we can make conditional judgments in Kconfig.
Link: https://lkml.kernel.org/r/5ebfa3d4b56e63c6906bda5eccaa9f7194d3a86b.1769515122.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Tested-by: Andreas Larsson <andreas@gaisler.com> [sparc, UP&SMP]
Acked-by: Andreas Larsson <andreas@gaisler.com> [sparc]
Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Magnus Lindholm <linmag7@gmail.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
On a 64-bit system, madvise(MADV_DONTNEED) may cause a large number of
empty PTE page table pages (such as 100GB+). To resolve this problem,
first enable MMU_GATHER_RCU_TABLE_FREE to prepare for enabling the
PT_RECLAIM feature, which resolves this problem.
Link: https://lkml.kernel.org/r/e2217546504668b8a87a39eb0e378839339a1bb4.1769515122.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand (Red Hat) <david@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Magnus Lindholm <linmag7@gmail.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
On a 64-bit system, madvise(MADV_DONTNEED) may cause a large number of
empty PTE page table pages (such as 100GB+). To resolve this problem,
first enable MMU_GATHER_RCU_TABLE_FREE to prepare for enabling the
PT_RECLAIM feature, which resolves this problem.
Link: https://lkml.kernel.org/r/b827939046dbc94bc7c585cdbed8522baab75b15.1769515122.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand (Red Hat) <david@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Magnus Lindholm <linmag7@gmail.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
On a 64-bit system, madvise(MADV_DONTNEED) may cause a large number of
empty PTE page table pages (such as 100GB+). To resolve this problem,
first enable MMU_GATHER_RCU_TABLE_FREE to prepare for enabling the
PT_RECLAIM feature, which resolves this problem.
Link: https://lkml.kernel.org/r/0d17f00a724f77aaca2da7c847acd490c3a47571.1769515122.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand (Red Hat) <david@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Magnus Lindholm <linmag7@gmail.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Gleixner <tglx@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
On a 64-bit system, madvise(MADV_DONTNEED) may cause a large number of
empty PTE page table pages (such as 100GB+). To resolve this problem,
first enable MMU_GATHER_RCU_TABLE_FREE to prepare for enabling the
PT_RECLAIM feature, which resolves this problem.
Link: https://lkml.kernel.org/r/bd1b11bc1a13686aeba81a40194f87b369d62661.1769515122.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand (Red Hat) <david@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Magnus Lindholm <linmag7@gmail.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
On a 64-bit system, madvise(MADV_DONTNEED) may cause a large number of
empty PTE page table pages (such as 100GB+). To resolve this problem,
first enable MMU_GATHER_RCU_TABLE_FREE to prepare for enabling the
PT_RECLAIM feature, which resolves this problem.
Link: https://lkml.kernel.org/r/3380f40a89b73c488202c85f9a8abf99fb08543b.1769515122.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: Magnus Lindholm <linmag7@gmail.com> [alpha]
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand (Red Hat) <david@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Enhance output when running PAT firmware, which is helpful when
developing the QEMU emulator. The added code is behind an ifdef,
so no performance overhead for normal kernels.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
PDC PAT defines this optional function. Testing on my C8000 workstation
and a rp3440 server did not indicate that they provide such counter.
Nevertheless, add the function since we should try to use such a
counter if it's available. In Qemu it should be simple to add it.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The hardware IDs are 32-bit unsigned integers, so print them as 4-digit
hex numbers. Additionally fix some whitespace glitches.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
If device_register() fails, put_device() is the correct way to
drop the device reference.
Found by code review.
Fixes: 1070c9655b90 ("[PA-RISC] Fix must_check warnings in drivers.c")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Fedora QA reported the following panic:
BUG: unable to handle page fault for address: 0000000040003e54
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20251119-3.fc43 11/19/2025
RIP: 0010:vmware_hypercall4.constprop.0+0x52/0x90
..
Call Trace:
vmmouse_report_events+0x13e/0x1b0
psmouse_handle_byte+0x15/0x60
ps2_interrupt+0x8a/0xd0
...
because the QEMU VMware mouse emulation is buggy, and clears the top 32
bits of %rdi that the kernel kept a pointer in.
The QEMU vmmouse driver saves and restores the register state in a
"uint32_t data[6];" and as a result restores the state with the high
bits all cleared.
RDI originally contained the value of a valid kernel stack address
(0xff5eeb3240003e54). After the vmware hypercall it now contains
0x40003e54, and we get a page fault as a result when it is dereferenced.
The proper fix would be in QEMU, but this works around the issue in the
kernel to keep old setups working, when old kernels had not happened to
keep any state in %rdi over the hypercall.
In theory this same issue exists for all the hypercalls in the vmmouse
driver; in practice it has only been seen with vmware_hypercall3() and
vmware_hypercall4(). For now, just mark RDI/RSI as clobbered for those
two calls. This should have a minimal effect on code generation overall
as it should be rare for the compiler to want to make RDI/RSI live
across hypercalls.
Reported-by: Justin Forbes <jforbes@fedoraproject.org>
Link: https://lore.kernel.org/all/99a9c69a-fc1a-43b7-8d1e-c42d6493b41f@broadcom.com/
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The can IP on PolarFire SoC requires the use of the blocks reset
during normal operation, and the property is therefore required by the
binding, causing a warning on the m100pfsevp board where it is default
enabled:
mpfs-m100pfsevp.dtb: can@2010c000 (microchip,mpfs-can): 'resets' is a required property
Add the reset to both can nodes.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Pull ARM fix from Russell King:
"Just one fix for memset64() on big endian 32-bit ARM systems"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9468/1: fix memset64() on big-endian
|
|
The commit 1b35a57b1c178 ("sparc32: Kill off software 32-bit multiply/divide
routines") removed the last usage of strtab in funtion module_frob_arch_sections
Therefore, it can be removed now.
Reported-by: kernel test robot <lkp@intel.com>
Cc: sparclinux@vger.kernel.org
Cc: David S. Miller <davem@davemloft.net>
Cc: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Alex Shi <alexs@kernel.org>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
|
|
arch/sparc/mm/init_64.c: In function 'arch_hugetlb_valid_size':
arch/sparc/mm/init_64.c:361:24: warning: variable 'hv_pgsz_idx'
set but not used [-Wunused-but-set-variable]
361 | unsigned short hv_pgsz_idx;
| ^~~~~~~~~~~
Reported-by: kernel test robot <lkp@intel.com>
Cc: sparclinux@vger.kernel.org
CC: Nitin Gupta <nitin.m.gupta@oracle.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Alex Shi <alexs@kernel.org>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
|
|
Similar in nature to commit ab107276607a ("powerpc: Fix struct termio related ioctl macros").
glibc-2.42 drops the legacy termio struct, but the ioctls.h header still
defines some TC* constants in terms of termio (via sizeof). Hardcode the
values instead.
This fixes building Python for example, which falls over like:
./Modules/termios.c:1119:16: error: invalid application of 'sizeof' to incomplete type 'struct termio'
Link: https://bugs.gentoo.org/961769
Link: https://bugs.gentoo.org/962600
Signed-off-by: Sam James <sam@gentoo.org>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
|
|
Replace snprintf("%s", ...) with the faster and more direct strscpy().
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
|
|
Add support for the clone3 system call to the SPARC architectures.
The implementation follows the pattern of the original clone syscall.
However, instead of explicitly calling kernel_clone, the clone3
handler calls the generic sys_clone3 handler in kernel/fork.
In case no stack is provided, the parents stack is reused.
The return value convention for clone3 follows the regular kernel return
value convention (in contrast to the original clone/fork on SPARC).
Closes: https://github.com/sparclinux/issues/issues/10
Signed-off-by: Ludwig Rydberg <ludwig.rydberg@gaisler.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Tested-by: Andreas Larsson <andreas@gaisler.com>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/20260119144753.27945-3-ludwig.rydberg@gaisler.com
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
|
|
Flush all uncommitted user windows before calling the generic syscall
handlers for clone, fork, and vfork.
Prior to entering the arch common handlers sparc_{clone|fork|vfork}, the
arch-specific syscall wrappers for these syscalls will attempt to flush
all windows (including user windows).
In the window overflow trap handlers on both SPARC{32|64},
if the window can't be stored (i.e due to MMU related faults) the routine
backups the user window and increments a thread counter (wsaved).
By adding a synchronization point after the flush attempt, when fault
handling is enabled, any uncommitted user windows will be flushed.
Link: https://sourceware.org/bugzilla/show_bug.cgi?id=31394
Closes: https://lore.kernel.org/sparclinux/fe5cc47167430007560501aabb28ba154985b661.camel@physik.fu-berlin.de/
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Ludwig Rydberg <ludwig.rydberg@gaisler.com>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/20260119144753.27945-2-ludwig.rydberg@gaisler.com
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
|
|
Currently, KVM assumes the minimum of implemented HGEIE bits and
"BIT(gc->guest_index_bits) - 1" as the number of guest files available
across all CPUs. This will not work when CPUs have different number
of guest files because KVM may incorrectly allocate a guest file on a
CPU with fewer guest files.
To address above, during initialization, calculate the number of
available guest interrupt files according to MMIO resources and
constrain the number of guest interrupt files that can be allocated
by KVM.
Signed-off-by: Xu Lu <luxu.kernel@bytedance.com>
Reviewed-by: Nutty Liu <nutty.liu@hotmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Acked-by: Thomas Gleixner <tglx@kernel.org>
Link: https://lore.kernel.org/r/20260104133457.57742-1-luxu.kernel@bytedance.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Use block mapping if backed by a THP, as implemented in architectures
like ARM and x86_64.
Signed-off-by: Jessica Liu <liu.xuemei1@zte.com.cn>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20251127165137780QbUOVPKPAfWSGAFl5qtRy@zte.com.cn
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Extend the KVM ISA extension ONE_REG interface to allow KVM user space
to detect and enable Zalasr extensions for Guest/VM.
Signed-off-by: Xu Lu <luxu.kernel@bytedance.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20251020042457.30915-5-luxu.kernel@bytedance.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Extend the KVM ISA extension ONE_REG interface to allow KVM user space
to detect and enable Zilsd and Zclsd extensions for Guest/VM.
Signed-off-by: Pincheng Wang <pincheng.plct@isrc.iscas.ac.cn>
Reviewed-by: Nutty Liu <nutty.liu@hotmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20250826162939.1494021-5-pincheng.plct@isrc.iscas.ac.cn
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
kvm_riscv_vcpu_aia_imsic_update() assumes that the vCPU IMSIC state has
already been initialized and unconditionally accesses imsic->vsfile_lock.
However, in fuzzed ioctl sequences, the AIA device may be initialized at
the VM level while the per-vCPU IMSIC state is still NULL.
This leads to invalid access when entering the vCPU run loop before
IMSIC initialization has completed.
The crash manifests as:
Unable to handle kernel paging request at virtual address
dfffffff00000006
...
kvm_riscv_vcpu_aia_imsic_update arch/riscv/kvm/aia_imsic.c:801
kvm_riscv_vcpu_aia_update arch/riscv/kvm/aia_device.c:493
kvm_arch_vcpu_ioctl_run arch/riscv/kvm/vcpu.c:927
...
Add a guard to skip the IMSIC update path when imsic_state is NULL. This
allows the vCPU run loop to continue safely.
This issue was discovered during fuzzing of RISC-V KVM code.
Fixes: db8b7e97d6137a ("RISC-V: KVM: Add in-kernel virtualization of AIA IMSIC")
Signed-off-by: Jiakai Xu <xujiakai2025@iscas.ac.cn>
Signed-off-by: Jiakai Xu <jiakaiPeanut@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260127084313.3496485-1-xujiakai2025@iscas.ac.cn
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Add a null pointer check for imsic_state before dereferencing it in
kvm_riscv_aia_imsic_rw_attr(). While the function checks that the
vcpu exists, it doesn't verify that the vcpu's imsic_state has been
initialized, leading to a null pointer dereference when accessed.
The crash manifests as:
Unable to handle kernel paging request at virtual address
dfffffff00000006
...
kvm_riscv_aia_imsic_rw_attr+0x2d8/0x854 arch/riscv/kvm/aia_imsic.c:958
aia_set_attr+0x2ee/0x1726 arch/riscv/kvm/aia_device.c:354
kvm_device_ioctl_attr virt/kvm/kvm_main.c:4744 [inline]
kvm_device_ioctl+0x296/0x374 virt/kvm/kvm_main.c:4761
vfs_ioctl fs/ioctl.c:51 [inline]
...
The fix adds a check to return -ENODEV if imsic_state is NULL and moves
isel assignment after imsic_state NULL check.
Fixes: 5463091a51cfaa ("RISC-V: KVM: Expose IMSIC registers as attributes of AIA irqchip")
Signed-off-by: Jiakai Xu <xujiakai2025@iscas.ac.cn>
Signed-off-by: Jiakai Xu <jiakaiPeanut@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260127072219.3366607-1-xujiakai2025@iscas.ac.cn
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Add a null pointer check for imsic_state before dereferencing it in
kvm_riscv_aia_imsic_has_attr(). While the function checks that the
vcpu exists, it doesn't verify that the vcpu's imsic_state has been
initialized, leading to a null pointer dereference when accessed.
This issue was discovered during fuzzing of RISC-V KVM code. The
crash occurs when userspace calls KVM_HAS_DEVICE_ATTR ioctl on an
AIA IMSIC device before the IMSIC state has been fully initialized
for a vcpu.
The crash manifests as:
Unable to handle kernel paging request at virtual address
dfffffff00000001
...
epc : kvm_riscv_aia_imsic_has_attr+0x464/0x50e
arch/riscv/kvm/aia_imsic.c:998
...
kvm_riscv_aia_imsic_has_attr+0x464/0x50e arch/riscv/kvm/aia_imsic.c:998
aia_has_attr+0x128/0x2bc arch/riscv/kvm/aia_device.c:471
kvm_device_ioctl_attr virt/kvm/kvm_main.c:4722 [inline]
kvm_device_ioctl+0x296/0x374 virt/kvm/kvm_main.c:4739
...
The fix adds a check to return -ENODEV if imsic_state is NULL, which
is consistent with other error handling in the function and prevents
the null pointer dereference.
Fixes: 5463091a51cf ("RISC-V: KVM: Expose IMSIC registers as attributes of AIA irqchip")
Signed-off-by: Jiakai Xu <xujiakai2025@iscas.ac.cn>
Signed-off-by: Jiakai Xu <jiakaiPeanut@gmail.com>
Reviewed-by: Nutty Liu <nutty.liu@hotmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260125143344.2515451-1-xujiakai2025@iscas.ac.cn
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
If execution reaches "ret = 0" assignment in
kvm_riscv_vcpu_pmu_event_info() then it means
kvm_vcpu_write_guest() returned 0 hence ret is
already zero and does not need to be assigned 0.
Fixes: e309fd113b9f ("RISC-V: KVM: Implement get event info function")
Signed-off-by: Qiang Ma <maqianga@uniontech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20251229072530.3075496-1-maqianga@uniontech.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The generic CC_CAN_LINK detection does not handle different byte orders.
This may lead to userprogs which are not actually runnable on the target
kernel.
Use architecture-specific logic supporting byte orders instead.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Function vcpu_is_preempted() is used to check whether vCPU is preempted
or not. Here add the implementation with vcpu_is_preempted() when option
CONFIG_PARAVIRT is enabled.
Acked-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Feature KVM_FEATURE_PREEMPT is added to show whether vCPU is preempted
or not. It is to help guest OS scheduling or lock checking etc. Here
add KVM_FEATURE_PREEMPT feature and use one byte as preempted flag in
the steal time structure.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
When in-kernel irqchip is enabled, its register area is registered in
the KVM IO bus list with API kvm_io_bus_register_dev(). In MMIO/IOCSR
register access emulation, kvm_io_bus_read()/kvm_io_bus_write() is
called firstly. If it returns 0, it means that the in-kernel irqchip
handles the emulation already, else it returns to user-mode VMM and
lets VMM emulate the register access.
Once in-kernel irqchip is enabled, it should return 0 if the address
is within range of the registered KVM IO bus. It should not return to
user-mode VMM since VMM does not know how to handle it, and irqchip is
handled in kernel already.
Here set default return value with 0 in KVM IO bus operations.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
FPU/LBT are lazy enabled with KVM hypervisor. After FPU/LBT enabled and
loaded, vCPU can be preempted and FPU/LBT will be lost again, there will
be unnecessary FPU/LBT exceptions, load and store stuff. Here delay the
FPU/LBT load until the guest entry.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Like FPU exception handler, check LBT capability in the LBT exception
handler rather than function kvm_own_lbt().
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Like FPU exception handler, check LASX capability in the LASX exception
handler rather than function kvm_own_lasx(). Since LASX capability in
the function kvm_guest_has_lasx() implies FPU and LSX capability, only
checking kvm_guest_has_lasx() is OK here.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Like FPU exception handler, check LSX capability in the LSX exception
handler rather than function kvm_own_lsx(). Since LSX capability in
the function kvm_guest_has_lsx() implies FPU capability, only checking
kvm_guest_has_lsx() is OK here.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Register LOONGARCH_CSR_IPR is interrupt priority setting for nested
interrupt handling. Though LoongArch Linux AVEC driver does not use
this register, KVM hypervisor needs to save and restore this it during
vCPU context switch. Because Linux AVEC driver may use this register
in future, or other OS may use it.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
During message interrupt handling and relative CSR registers saving and
restore, it is better to check VM msgint feature rather than host msgint
feature, because VM may disable this feature even if host supports this.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add flag HW_GCSR with msgint registers in function kvm_init_gcsr_flag().
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
VM feature detection is sparsed in function kvm_vm_init_features() and
kvm_vm_feature_has_attr(). Here move all the features detection in
function kvm_vm_init_features(), and there is only feature checking in
function kvm_vm_feature_has_attr().
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
With new CPU cores there are more features supported which are indicated
in CPUCFG2 bits 24:30 and CPUCFG3 bits 17:23. The KVM hypervisor cannot
enable or disable (most of) these features and there is no KVM exception
when instructions of these features are executed in guest mode.
Here add more CPUCFG mask support with LA664 CPU type.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Cross-merge networking fixes after downstream PR (net-6.19-rc9).
No adjacent changes, conflicts:
drivers/net/ethernet/spacemit/k1_emac.c
3125fc1701694 ("net: spacemit: k1-emac: fix jumbo frame support")
f66086798f91f ("net: spacemit: Remove broken flow control support")
https://lore.kernel.org/aYIysFIE9ooavWia@sirena.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
* kvm-arm64/misc-6.20:
: .
: Misc KVM/arm64 changes for 6.20
:
: - Trivial FPSIMD cleanups
:
: - Calculate hyp VA size only once, avoiding potential mapping issues when
: VA bits is smaller than expected
:
: - Silence sparse warning for the HYP stack base
:
: - Fix error checking when handling FFA_VERSION
:
: - Add missing trap configuration for DBGWCR15_EL1
:
: - Don't try to deal with nested S2 when NV isn't enabled for a guest
:
: - Various spelling fixes
: .
KVM: arm64: nv: Avoid NV stage-2 code when NV is not supported
KVM: arm64: Fix various comments
KVM: arm64: nv: Add trap config for DBGWCR<15>_EL1
KVM: arm64: Fix error checking for FFA_VERSION
KVM: arm64: Fix missing <asm/stackpage/nvhe.h> include
KVM: arm64: Calculate hyp VA size only once
KVM: arm64: Remove ISB after writing FPEXC32_EL2
KVM: arm64: Shuffle KVM_HOST_DATA_FLAG_* indices
KVM: arm64: Fix comment in fpsimd_lazy_switch_to_host()
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
