| Age | Commit message (Collapse) | Author |
|---|
|
not using in USB-C complex
The QMP USB3/DP Combo PHY hosts an USB3 phy and a DP PHY on top
of a combo glue to route either lanes to the 4 shared physical lanes.
The routing of the lanes can be:
- 2 DP + 2 USB3
- 4 DP
- 2 USB3
The layout of the lanes was designed to be mapped and swapped
related to the USB-C Power Delivery negociation, so it supports
a finite set of mappings inherited by the USB-C Altmode layouts.
Nevertheless those QMP Comby PHY can be used to drive a DisplayPort
connector, DP->HDMI bridge, USB3 A Connector, etc... without
an USB-C connector and no PD events.
Document the data-lanes on numbered port@0 out endpoints,
allowing us to document the lanes mapping to DisplayPort
and/or USB3 connectors/peripherals.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251119-topic-x1e80100-hdmi-v7-1-2bee0e66cc1b@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The reset lines are mandatory for the Renesas RZ/G3S platform and must be
explicitly defined in device tree.
Fixes: f3c849855114 ("dt-bindings: phy: renesas,usb2-phy: Document RZ/G3S phy bindings")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20251023135810.1688415-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Document a compatible string for the rk3506 dsi-dphy.
Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20251106020632.92-3-kernel@airkyi.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Document the FP9931/JD9930. As the FP9931 is a clear subset of the JD9930,
define it as a fallback compatible. GPIO names are same as in the datasheet
except for the EN pad which is described as "enable".
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://patch.msgid.link/20251115-fp9931-submit-v3-2-92f5d0772b68@kemnade.info
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add Fitipower Integrated Technology Inc. to the vendor prefixes.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://patch.msgid.link/20251115-fp9931-submit-v3-1-92f5d0772b68@kemnade.info
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a compatible string for Filogic 820, this chip integrates a MediaTek
generic T-PHY version 2
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sjoerd Simons <sjoerd@collabora.com>
Link: https://patch.msgid.link/20251115-openwrt-one-network-v4-3-48cbda2969ac@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The timepulse pin is an output that can be used to generate a pulse at a
(configurable) frequency (i.e. it is not an input).
Fixes: dba529605f55 ("dt-bindings: gnss: Rewrite common bindings in YAML")
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
The u-blox company name is written in lowercase so restore the style
that was used before the binding was converted to YAML.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
The RESET_N and SAFEBOOT_N pins should typically be left open and only
be connected to ground in rare cases where a device is misbehaving.
Specify GPIO_OPEN_DRAIN in the example as this is what should generally
be used.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
This hardware block amongst other things includes a multiplexer for a
high-speed Combo-Phy. This binding allows exposing the multiplexer
Signed-off-by: Sjoerd Simons <sjoerd@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20251115-openwrt-one-network-v4-1-48cbda2969ac@collabora.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Bean Huo <beanhuo@iokpp.de> says:
This patch series introduces OP-TEE based RPMB (Replay Protected
Memory Block) support for UFS devices, extending the kernel-level
secure storage capabilities that are currently available for eMMC
devices.
Previously, OP-TEE required a userspace supplicant to access RPMB
partitions, which created complex dependencies and reliability issues,
especially during early boot scenarios. Recent work by Linaro has
moved core supplicant functionality directly into the Linux kernel for
eMMC devices, eliminating userspace dependencies and enabling
immediate secure storage access. This series extends the same approach
to UFS devices, which are used in enterprise and mobile applications
that require secure storage capabilities.
Benefits:
- Eliminates dependency on userspace supplicant for UFS RPMB access
- Enables early boot secure storage access (e.g., fTPM, secure UEFI
variables)
- Provides kernel-level RPMB access as soon as UFS driver is
initialized
- Removes complex initramfs dependencies and boot ordering
requirements
- Ensures reliable and deterministic secure storage operations
- Supports both built-in and modular fTPM configurations.
Prerequisites:
--------------
This patch series depends on commit 7e8242405b94 ("rpmb: move struct
rpmb_frame to common header") which has been merged into mainline
v6.18-rc2.
Link: https://patch.msgid.link/20251107230518.4060231-1-beanhuo@iokpp.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
LPG channels can be used for only outputting PWM signals by routing to
PMIC GPIOs without enabling TRILED. Explain this usage in the description
for better clarity.
Signed-off-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://patch.msgid.link/20251119-lpg_triled_fix-v3-1-84b6dbdc774a@oss.qualcomm.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The 'leds' node is missing constraints on additional properties. It is
mixing 'leds' node and child node properties as well as missing some
properties. Add the 'led@' child nodes and the missing properties.
Fixes: 1160f9f88be2 ("dt-bindings: mfd: fsl,mc13xxx: Convert txt to DT schema")
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251118213541.43812-1-robh@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The sfrbu on both sama7g5 and sama6d65 both fall back to sama5d2 in
devicetrees, but the former two compatibles were undocumented. Now that
syscon.yaml has easy support for multiple soc-specific compatibles, add
both of these undocumented devices.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251117-marlin-mustang-5ffda4d211c7@spud
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
On pic64gx these syscons are identical to those on mpfs, and should use
a fallback. Add support for multiple fallback compatibles to syscon.yaml
with these as the first two users.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251117-aeration-smock-5e7ac06e2942@spud
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
TAS5806M, TAS5806MD and TAS5830 is in same family with TAS58XX.
TAS2568, TAS2574 is in family with TAS257X.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://patch.msgid.link/20251117102153.30644-1-baojun.xu@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert dlg,da9052-i2c.txt to yaml format.
Additional changes:
- compatible string fallback to dlg,da9052 to align existing dts files.
- Add interrupts property.
- Add ref to /schemas/spi/spi-peripheral-props.yaml#
- Add dlg,da9053bc.
Remove dlg,da9053 from trivial-devices.yaml.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251114213037.1211907-1-Frank.Li@nxp.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Some PWM LED driver chips like TPS92380 and LT3743 require a separate
enable signal in addition to PWM control. Add this property to allow
device trees to specify such GPIO, which will be controlled
automatically by the driver based on the LED brightness state.
Signed-off-by: LI Qingwu <Qing-wu.Li@leica-geosystems.com.cn>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251117054511.730246-1-Qing-wu.Li@leica-geosystems.com.cn
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Pull in fixes branch to resolve UFS merge conflict.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Different SoCs have different numbers of Wireless Ethernet
Dispatch (WED) units:
- MT7981: Has 1 WED unit
- MT7986: Has 2 WED units
- MT7988: Has 2 WED units
Update the binding to reflect these hardware differences. The MT7981
also uses infracfg for PHY switching, so allow that property.
Signed-off-by: Sjoerd Simons <sjoerd@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20251115-openwrt-one-network-v4-6-48cbda2969ac@collabora.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert the lattice,ice40-fpga-mgr binding to DT schema format. It's a
straight-forward conversion.
Link: https://patch.msgid.link/20251029185503.2124434-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
As mention in sifive,plic-1.0.0.yaml, a specific compatible should be used
for pic64gx, so here it is.
Signed-off-by: Pierre-Henry Moussay <pierre-henry.moussay@microchip.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20251117-evict-corridor-5efe40101eea@spud
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Merge the immutable branch dt into next, to allow the DT bindings to be
tested together with changes that are targeted for v6.19.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add description for the Zalasr ISA extension
Signed-off-by: Xu Lu <luxu.kernel@bytedance.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20251020042056.30283-3-luxu.kernel@bytedance.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
Reason for moving from simple panel is this DDIC has three supplies,
while panel-simple-dsi is limited to one.
Previous compatible only described the DDIC, but didn't include panel
connected to it. Let's fix it, and offer bindings authors two
compatibles to distinguish the connected panel.
Basic description for SOFEF00 DDIC with attached panels
- Samsung AMS601NT22 6.01 inch, 1080x2160 pixels, 18:9 ratio
- Samsung AMS628NW01 6.28 inch, 1080x2280 pixels, 19:9 ratio
There is only one user which uses samsung,sofef00 and it's updated to
comply within this patch series.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251119-sofef00-rebuild-v3-1-6cd55471e84e@ixit.cz
|
|
Like w552946aba, w552946aaa uses the Ilitek ILI9881D controller chip,
and it supports up to 2 lanes.
Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251106020632.92-2-kernel@airkyi.com
|
|
Add Winstar WF70A8SYJHLNGA 7 inch WSVGA lvds panel.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251117-imx8mp-hb-iiot-v3-3-bf1a4cf5fa8e@solid-run.com
|
|
Add missing ref on panel-common.yaml for this dsi panel so that common
properties can be shared.
Drop reset-gpios and backlight as they are already in panel-common.
Switch from additionalProperties to unevaluatedProperties so that common
panel properties are available without repeating them in this binding.
Notably panel-common defines the "port" property for linking panels to a
source - which was missing from this panel. Mark it as required.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251117-imx8mp-hb-iiot-v3-2-bf1a4cf5fa8e@solid-run.com
|
|
Add Raystar RFF500F-AWH-DNN 5.0" TFT 840x480 LVDS panel compatible string.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251115025827.3113790-2-festevam@gmail.com
|
|
Raystar Optronics is an LCD manufacturer based in Taiwan:
https://www.raystar-optronics.com/
Add a vendor prefix for it.
Signed-off-by: Fabio Estevam <festevam@nabladev.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251115025827.3113790-1-festevam@gmail.com
|
|
Document Samsung LTL106AL01 simple LVDS panel.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251110091440.5251-5-clamor95@gmail.com
|
|
LG LD070WX3-SL01 was mistakenly documented as a simple DSI panel, which it
clearly is not. Address this by adding the proper schema for this panel.
There is only one user of this panel binding in the mainline Linux kernel,
which is the Nvidia tablet Tegra Note 7. Its panel is broken anyway since
it cannot initialize properly if the bootloader does not leave a
pre-initialized panel. It also cannot suspend or re-initialize properly,
since no DSI configuration is set and it has a loose regulator which
relies on an always-on property rather than being hooked to the panel
where it belongs.
Tegra Note 7 device tree is adjusted as a part of this series.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251110091440.5251-2-clamor95@gmail.com
|
|
Add new compatible for ao-secure of Amlogic SoCs(S6,S7,S7D).
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://patch.msgid.link/20251119-soc-info-s6-s7-s7d-v3-1-1764c1995c04@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
on '^conf' nodes
Add the missing unevaluatedProperties to disallow extra properties on
the '^conf' nodes.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Fix the following DT schema check warning:
./Documentation/devicetree/bindings/pinctrl/cix,sky1-pinctrl.yaml:68:1: [warning] too many blank lines (2 > 1) (empty-lines)
One newline is enough. No functional change.
Signed-off-by: Marek Vasut <marex@nabladev.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add the clocks for some interconnects to the bindings that are required
to set up the QoS correctly. Update one of the examples to aggre2_noc to
have an example with clocks.
Also while we're at it, remove #interconnect-cells: true as that's
already provided from qcom,rpmh-common.yaml.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20251114-sm6350-icc-qos-v2-1-6af348cb9c69@fairphone.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Add PCIe PERST# group to support for PCIe RC.
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The pic64gx uses an identical integration of the macb IP to mpfs.
Signed-off-by: Pierre-Henry Moussay <pierre-henry.moussay@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251117-easter-machine-37851f20aaf3@spud
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add interconnect dt-bindings and driver support for Qualcomm Kaanapali SoC.
* icc-kaanapali
dt-bindings: interconnect: document the RPMh Network-On-Chip interconnect in Kaanapali SoC
interconnect: qcom: add Kaanapali interconnect provider driver
dt-bindings: interconnect: qcom-bwmon: Document Kaanapali BWMONs
Link: https://lore.kernel.org/r/20251031-knp-interconnect-v4-0-568bba2cb3e5@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Document the Kaanapali BWMONs, which have one instance per
cluster of BWMONv4.
Signed-off-by: Amir Vajid <amir.vajid@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250924-knp-bwmon-v1-1-56a9cdda7d72@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Add compatible string for SM8750 video clock controller and the bindings
for SM8750 Qualcomm SoC.
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20251118-sm8750-videocc-v2-v4-4-049882a70c9f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Make the different debounce timers configurable from the devicetree.
Depending on the board design, these have to be set different than the
default register values.
Signed-off-by: Martijn de Gouw <martijn.de.gouw@prodrive-technologies.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251117202215.1936139-1-martijn.de.gouw@prodrive-technologies.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add document for mt8189 board with nau8825.
Signed-off-by: Cyril Chao <Cyril.Chao@mediatek.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251031073216.8662-10-Cyril.Chao@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add mt8189 audio afe document.
Signed-off-by: Cyril Chao <Cyril.Chao@mediatek.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251031073216.8662-8-Cyril.Chao@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a device tree binding for the Toshiba TC9563 PCIe switch, which
provides an Ethernet MAC integrated to the 3rd downstream port and
two downstream PCIe ports.
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251101-tc9563-v9-1-de3429f7787a@oss.qualcomm.com
|
|
Biju <biju.das.au@gmail.com> says:
This patch series aims to add Renesas RZ/G3E USB3.0 PHY driver support.
This module is connected between USB3 Host and PHY module. The main
functions of this module are:
1) Reset control
2) Control of PHY input pins
3) Monitoring of PHY output pins
Biju Das (2):
dt-bindings: phy: renesas: Document Renesas RZ/G3E USB3.0 PHY
phy: renesas: Add Renesas RZ/G3E USB3.0 PHY driver
Link: https://patch.msgid.link/20251029084037.108610-1-biju.das.jz@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Document Renesas RZ/G3E USB3.0 PHY. This IP is connected between
USB3HOST and PHY module. The main functions of the module are
as follows:
- Reset control
- Control of PHY input pins
- Monitoring of PHY output pins
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251029084037.108610-2-biju.das.jz@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Document Adreno X2-85 GMU found in Glymur chipsets in the
dt-binding specification. It is very similar to Adreno 840
GMU with the additional requirement of RSCC HUB clock.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/689032/
Message-ID: <20251118-kaana-gpu-support-v4-21-86eeb8e93fb6@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
|
|
Document Adreno 840 GMU in the dt-binding specification.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/689031/
Message-ID: <20251118-kaana-gpu-support-v4-20-86eeb8e93fb6@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
|
|
Update the devicetree bindings to document the GPU SMMUs present in
Kaanapali and Glymur chipsets.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/689028/
Message-ID: <20251118-kaana-gpu-support-v4-19-86eeb8e93fb6@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
|
