| Age | Commit message (Collapse) | Author |
|
Convert the micrel-ksz90x1.txt to DT schema. Create a separate YAML file
for this PHY series. The old naming of ksz90x1 would be misleading in
this case, so rename it to gigabit, as it contains ksz9xx1 and lan8xxx
gigabit PHYs.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260116130948.79558-3-eichest@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert the devicetree bindings for the Micrel PHYs and switches to DT
schema.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260116130948.79558-2-eichest@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
LAN969x has 2 dedicated RGMII ports, so regular SERDES lanes are not used
for RGMII.
So, lets not require phys to be defined when any of the rgmii phy-modes are
set.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260115114021.111324-11-robert.marko@sartura.hr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Kaanapali introduces DPU 13.0.0 and DSI 2.10. Compared to SM8750,
Kaanapali has significant register changes, making it incompatible
with SM8750. So add MDSS/MDP display subsystem for Qualcomm Kaanapali.
Co-developed-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Signed-off-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Yuanjie Yang <yuanjie.yang@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/698700/
Link: https://lore.kernel.org/r/20260115092749.533-5-yuanjie.yang@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
The DSI registers on the Kaanapali platform differ from those on SM8750.
So add DSI for Kaanapali to compatible these changes.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Yuanjie Yang <yuanjie.yang@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/698698/
Link: https://lore.kernel.org/r/20260115092749.533-4-yuanjie.yang@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
The DSI PHY registers on the Kaanapali platform differ from those
on SM8750. So add DSI PHY for Kaanapali to compatible these changes.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Yuanjie Yang <yuanjie.yang@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/698696/
Link: https://lore.kernel.org/r/20260115092749.533-3-yuanjie.yang@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Add DPU version 13.0 for Qualcomm Kaanapali Soc. The Kaanapali
DPU and SM8750 have significant differences, including additions
and removals of registers, as well as changes in register addresses.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Yuanjie Yang <yuanjie.yang@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/698694/
Link: https://lore.kernel.org/r/20260115092749.533-2-yuanjie.yang@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Merge Linux 6.19-rc1 in order to catch up with other changes (e.g. UBWC
config database defining UBWC_6).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Convert the Android Goldfish Events Keypad binding to DT schema format.
Move the file to the input directory to match the subsystem.
Update the example node name to 'keypad' to comply with generic node
naming standards.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260113092602.3197681-4-visitorckw@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
MT7987
Add thermal controller definition for MT7987.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251223175710.25850-2-linux@fw-web.de
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The MT8196 eFuse layout is compatible with MT8186 and shares the same
decoding scheme for the gpu-speedbin cell.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Laura Nao <laura.nao@collabora.com>
Link: https://patch.msgid.link/20251125-mt8196-lvts-v4-v5-8-6db7eb903fb7@collabora.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Add LVTS thermal controller binding for MediaTek MT8196.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Laura Nao <laura.nao@collabora.com>
Link: https://patch.msgid.link/20251125-mt8196-lvts-v4-v5-1-6db7eb903fb7@collabora.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Document FocalTech FT3518 support by adding the compatible.
Co-developed-by: Kamil Gołda <kamil.golda@protonmail.com>
Signed-off-by: Kamil Gołda <kamil.golda@protonmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Yedaya Katsman <yedaya.ka@gmail.com>
Link: https://patch.msgid.link/20260118-touchscreen-patches-v3-1-1c6a729c5eb4@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Merge series from Claudiu <claudiu.beznea@tuxon.dev>:
This series adds cleanups for the Renesas RZ SSI driver.
|
|
Merge series from Abdurrahman Hussain <abdurrahman@nexthop.ai>:
Additionally, make interrupts optional to allow the driver to fall back
to its existing polling mode on systems where interrupts are either missing
or broken.
|
|
Both described in the binding PWM controllers depend on supply clocks,
thus it's necessary to specify 'clocks' property in the correspondent
device tree nodes.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251228224907.1729627-2-vz@mleia.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
Add DT binding document for Rockchip's RK801 PMIC
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260112124351.17707-2-chenjh@rock-chips.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Add DT binding documentation for the SpacemiT K3 SoC and the board Pico-ITX
which is a 2.5-inch single-board computer.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Link: https://lore.kernel.org/r/20260115-k3-basic-dt-v5-5-6990ac9f4308@riscstar.com
Signed-off-by: Yixun Lan <dlan@kernel.org>
|
|
Add compatible string for SpacemiT K3 IMSIC.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Link: https://lore.kernel.org/r/20260115-k3-basic-dt-v5-4-6990ac9f4308@riscstar.com
Signed-off-by: Yixun Lan <dlan@kernel.org>
|
|
Add compatible string for SpacemiT K3 APLIC.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Link: https://lore.kernel.org/r/20260115-k3-basic-dt-v5-3-6990ac9f4308@riscstar.com
Signed-off-by: Yixun Lan <dlan@kernel.org>
|
|
Add compatible string for SpacemiT K3 CLINT.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Link: https://lore.kernel.org/r/20260115-k3-basic-dt-v5-2-6990ac9f4308@riscstar.com
Signed-off-by: Yixun Lan <dlan@kernel.org>
|
|
Add compatible string for the SpacemiT X100 core. [1]
The X100 is a 64-bit RVA23-compliant RISC-V core from SpacemiT. X100
supports the RISC-V vector and hypervisor extensions and all mandatory
extersions as required by the RVA23U64 and RVA23S64 profiles, per the
definition in 'RVA23 Profile, Version 1.0'. [2]
From a microarchieture viewpoint, the X100 features a 4-issue
out-of-order pipeline.
X100 is used in SpacemiT K3 SoC.
Acked-by: Paul Walmsley <pjw@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://www.spacemit.com/en/spacemit-x100-core/ [1]
Link: https://docs.riscv.org/reference/profiles/rva23/_attachments/rva23-profile.pdf [2]
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Link: https://lore.kernel.org/r/20260115-k3-basic-dt-v5-1-6990ac9f4308@riscstar.com
Signed-off-by: Yixun Lan <dlan@kernel.org>
|
|
Document i.MX952 XSPI compatible, which is derived from
i.MX94 XSPI.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://patch.msgid.link/20260114-xspi-imx952-v1-1-acc60a5a2a9d@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The Anbernic RG-DS uses two (mostly) identical panels as a top
and bottom panel which appear to use the same controller as the
Jadard JD9365DA-H3. The panels differ with a parameter defined
differently in the init sequence.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260113195721.151205-3-macroalpha82@gmail.com
|
|
STM32 DCMIPP may be in a power domain which is the case for the
STM32MP2x based boards.
Allow a single 'power-domains' entry for STM32 DCMIPP.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251219-stm32-mp2x-dcmipp-csi-power-domain-v1-4-a6edb2aa8154@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
STM32 CSI may be in a power domain which is the case for the STM32MP2x
based boards. Allow a single 'power-domains' entry for STM32 CSI.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251219-stm32-mp2x-dcmipp-csi-power-domain-v1-1-a6edb2aa8154@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
STM32 I2C may be in a power domain which is the case for the STM32MP2x
based boards. Allow a single 'power-domains' entry for STM32 I2C.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251215-stm32-i2c-mp2x-dt-updates-v1-1-2738a05a7af8@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
In order to access the protected IO power domain registers, a valid
unlock sequence must be performed by writing the required keys to the
AIB Secure Access Register (ASAR).
The ASAR register resides within the APBC register address space.
A corresponding syscon property is added to allow the pinctrl driver
to access this register.
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Both the hardware and driver already support polling mode. By removing
the mandatory IRQ requirement during probe, the driver can now fall
back to polling when an interrupt is unavailable, ensuring
compatibility with a wider range of systems.
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Link: https://patch.msgid.link/20260119-spi-xilinx-v3-1-4566c33bac0d@nexthop.ai
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Document the compatible for the X1E80100 platform to the Qualcomm watchdog
binding. The HW implementation is compatible with the KPSS WDT.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251224-arm64-dts-qcom-x1e80100-el2-add-apss-wdt-v3-1-1801c55d2883@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add new maxlinear,slew-rate-txc and maxlinear,slew-rate-txd uint32
properties. The properties are only applicable for ports in R(G)MII mode
and allow for slew rate reduction in comparison to "normal" default
configuration with the purpose to reduce radiated emissions.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260114104509.618984-2-alexander.sverdlin@siemens.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix incorrect plural form of the uncountable noun 'hardware' in the
MediaTek DP binding description.
Signed-off-by: Nauman Sabir <officialnaumansabir@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20260112160759.19027-1-officialnaumansabir@gmail.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
The Documentation/devicetree/bindings/regulator/regulator.yaml
already states in its description that regulator-suspend-microvolt
is deprecated, but the schema did not formally mark it as such.
Add the `deprecated: true` annotation to regulator-suspend-microvolt
so that this is enforced at the schema level.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://patch.msgid.link/20260119-regulator-binding-v1-1-e55d33b4c3e3@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a new compatible string 'fsl,imx952-sai' for i.MX952 platform, which
is fallback compatible with 'fsl,imx95-sai'.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260115061418.4131432-1-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support for the mediatek,mt8192-audsys compatible, which uses
a different audio controller (mt8192-afe-pcm) compared to mt8183
and mt2701.
This resolves a dtbs_check warning on all MT8192 devicetrees.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add device tree binding for Qualcomm Coresight Interconnect Trace
Network On Chip (ITNOC). This TNOC acts as a CoreSight
graph link that forwards trace data from a subsystem to the
Aggregator TNOC, without aggregation or ATID functionality.
Signed-off-by: Yuanfang Zhang <yuanfang.zhang@oss.qualcomm.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20251203-itnoc-v5-1-5b97c63f2268@oss.qualcomm.com
|
|
Convert STMicroelectronics SPI FSM Serial NOR Flash Controller binding
to DT Schema.
Signed-off-by: Akhila YS <akhilayalmati@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Convert Microchip 23K256 SPI SRAM MTD binding to YAML format.
Changes during conversion:
- Remove "address-cells" and "size-cells" from properties and
required sections as there is no child node for sram.
Signed-off-by: Akhila YS <akhilayalmati@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Convert NVIDIA Tegra NAND Flash Controller binding to YAML format.
Changes during Conversion:
- Define new properties `power-domains` and `operating-points-v2`
because the existing in tree DTS uses them.
- Modify MAINTAINERS references to point the created YAML file.
Signed-off-by: Charan Pedumuru <charan.pedumuru@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next
Mediatek DRM Next - 20260117
1. mtk_hdmi_v2: Remove unneeded semicolon
2. Move DP training to hotplug thread
3. Convert legacy DRM logging to drm_* helpers in mtk_crtc.c
4. mtk_dsi: Add support for High Speed (HS) mode
5. Add HDMI support for Mediatek Genio 510/700/1200-EVK and Radxa NIO-12L boards
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patch.msgid.link/20260117005152.3770-1-chunkuang.hu@kernel.org
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung into devel
Samsung pinctrl drivers changes for v6.20
Add new pin controllers for Samsung Exynos9610 SoC.
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v6.20
- Add support for GPIO IRQs on RZ/T2H and RZ/N2H.
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy fixes from Vinod Koul:
"A bunch of driver fixes:
- Freescale typec orientation switch fix, clearing register fix,
assertion of phy reset during power on
- Qualcomm pcs register clear before using
- stm one off fix
- TI runtimepm error handling, regmap leak fixes
- Rockchip gadget mode disconnection and disruption fixes
- Tegra register level fix
- Broadcom pointer cast warning fix"
* tag 'phy-fixes-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: freescale: imx8m-pcie: assert phy reset during power on
phy: rockchip: inno-usb2: Fix a double free bug in rockchip_usb2phy_probe()
phy: broadcom: ns-usb3: Fix Wvoid-pointer-to-enum-cast warning (again)
phy: tegra: xusb: Explicitly configure HS_DISCON_LEVEL to 0x7
phy: rockchip: inno-usb2: fix communication disruption in gadget mode
phy: rockchip: inno-usb2: fix disconnection in gadget mode
phy: ti: gmii-sel: fix regmap leak on probe failure
phy: sparx5-serdes: make it selectable for ARCH_LAN969X
phy: ti: da8xx-usb: Handle devm_pm_runtime_enable() errors
phy: stm32-usphyc: Fix off by one in probe()
phy: qcom-qusb2: Fix NULL pointer dereference on early suspend
phy: fsl-imx8mq-usb: Clear the PCS_TX_SWING_FULL field before using it
dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Update pcie phy bindings for qcs8300
phy: fsl-imx8mq-usb: fix typec orientation switch when built as module
|
|
pic64gx mailbox is compatible with mpfs mailbox, even if the mailbox
consumer is not - the underlying communication mechanism is the same.
Signed-off-by: Pierre-Henry Moussay <pierre-henry.moussay@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes and new device ids for 6.19-rc6
Included in here are:
- new usb-serial device ids
- dwc3-apple driver fixes to get things working properly on that
hardware platform
- ohci/uhci platfrom driver module soft-deps with ehci to remove a
runtime warning that sometimes shows up on some platforms.
- quirk for broken devices that can not handle reading the BOS
descriptor from them without going crazy.
- usb-serial driver fixes
- xhci driver fixes
- usb gadget driver fixes
All of these except for the last xhci fix has been in linux-next for a
while. The xhci fix has been reported by others to solve the issue for
them, so should be ok"
* tag 'usb-6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
xhci: sideband: don't dereference freed ring when removing sideband endpoint
usb: gadget: uvc: retry vb2_reqbufs() with vb_vmalloc_memops if use_sg fail
usb: gadget: uvc: return error from uvcg_queue_init()
usb: gadget: uvc: fix interval_duration calculation
usb: gadget: uvc: fix req_payload_size calculation
usb: dwc3: apple: Ignore USB role switches to the active role
usb: host: xhci-tegra: Use platform_get_irq_optional() for wake IRQs
USB: OHCI/UHCI: Add soft dependencies on ehci_platform
usb: dwc3: apple: Set USB2 PHY mode before dwc3 init
USB: serial: f81232: fix incomplete serial port generation
USB: serial: ftdi_sio: add support for PICAXE AXE027 cable
USB: serial: option: add Telit LE910 MBIM composition
usb: core: add USB_QUIRK_NO_BOS for devices that hang on BOS descriptor
dt-bindings: usb: qcom,dwc3: Correct MSM8994 interrupts
dt-bindings: usb: qcom,dwc3: Correct IPQ5018 interrupts
tcpm: allow looking for role_sw device in the main node
usb: dwc3: Check for USB4 IP_NAME
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- riic, imx-lpi2c: suspend/resume fixes
- qcom-geni: DMA handling fix
- iproc: correct DT binding description
* tag 'i2c-for-6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: imx-lpi2c: change to PIO mode in system-wide suspend/resume progress
i2c: qcom-geni: make sure I2C hub controllers can't use SE DMA
i2c: riic: Move suspend handling to NOIRQ phase
dt-bindings: i2c: brcm,iproc-i2c: Allow 2 reg entries for brcm,iproc-nic-i2c
|
|
Document CPUSS Control Processor (CPUCP) mailbox controller for Qualcomm
Kaanapali, which is compatible with X1E80100, use fallback to indicate
this.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
The MTK VCP mailbox enables the SoC to communicate with the VCP by passing
messages through 64 32-bit wide registers. It has 32 interrupt vectors in
either direction for signalling purposes.
This adds a binding for Mediatek VCP mailbox.
Signed-off-by: Jjian Zhou <jjian.zhou@mediatek.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
These GPUs have physically have the same regions as the base case
("main" + "cx_mem" + "cx_dbgc"). Remove the specific override.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/696547/
Message-ID: <20251229-topic-6115_2290_gpu_dbgc-v1-1-4a24d196389c@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
|