| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2026-01-31
This first 2 patches are by Biju Das, target the rcar_canfd driver and
add support for FD-only mode.
Lad Prabhakar's patches, also for the rcar_canfd driver add support
for the RZ/T2H SoC.
The last 2 patches are by Michael Tretter and me, target the sja1000
driver and clean up the CAN state handling.
* tag 'linux-can-next-for-6.20-20260131' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: sja1000: sja1000_err(): use error counter for error state
can: sja1000: sja1000_err(): make use of sja1000_get_berr_counter() to read error counters
can: rcar_canfd: Add RZ/T2H support
dt-bindings: can: renesas,rcar-canfd: Document RZ/T2H and RZ/N2H SoCs
dt-bindings: can: renesas,rcar-canfd: Document RZ/V2H(P) and RZ/V2N SoCs
dt-bindings: can: renesas,rcar-canfd: Specify reset-names
can: rcar_canfd: Add support for FD-Only mode
dt-bindings: can: renesas,rcar-canfd: Document renesas,fd-only property
====================
Link: https://patch.msgid.link/20260131101512.1958907-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Just a few device-specific fixes; all small and mostly trivial, should
be pretty safe to take at the late stage"
* tag 'sound-6.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: sof_sdw: Add a quirk for Lenovo laptop using sidecar amps with cs42l43
ASoC: Intel: sof_es8336: fix headphone GPIO logic inversion
ASoC: amd: yc: Add DMI quirk for Acer TravelMate P216-41-TCO
ASoC: soc-acpi-intel-ptl-match: fix name_prefix of rt1320-2
ALSA: hda/realtek: Add quirk for Inspur S14-G1
ALSA: hda/realtek: fix right sounds and mute/micmute LEDs for HP machine
ALSA: hda/realtek: Really fix headset mic for TongFang X6AR55xU.
ALSA: hda/realtek - fixed speaker no sound
ASoC: amd: yc: Add ASUS ExpertBook PM1503CDA to quirks list
ASoC: fsl: imx-card: Do not force slot width to sample width
ASoC: dt-bindings: fsl,sai: Add support for i.MX952 platform
ASoC: cs35l45: Corrects ASP_TX5 DAPM widget channel
|
|
Document the NXP P3T1035 and P3T2030 compatibles in TMP108.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Mayank Mahajan <mayankmahajan.x@nxp.com>
Link: https://lore.kernel.org/r/20260119040459.2898998-1-mayankmahajan.x@nxp.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add device tree bindings for the hot-swap controller STEF48H28.
Signed-off-by: Charles Hsu <hsu.yungteng@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20260126063712.1049025-1-hsu.yungteng@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Convert the ASpeed fan controller binding to DT schema format.
The '#size-cells' value is 0 rather 1.
Some users define more that 8 fan nodes where 2 fans share a PWM. The
driver seems to let the 2nd fan just overwrite the 1st one. That also
creates some addressing errors in the DT (duplicate addresses and wrong
unit-addresses).
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Link: https://lore.kernel.org/r/20260109-dev-dt-warnings-hwmon-v1-1-f2a84cdb0e1b@codeconstruct.com.au
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add a device tree bindings for mp5926 device.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Yuxi Wang <Yuxi.Wang@monolithicpower.com>
Link: https://lore.kernel.org/r/20251219055413.1661-2-Yuxi.Wang@monolithicpower.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Document LAN969x hwmon temperature sensor compatible.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20251215163820.1584926-15-robert.marko@sartura.hr
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Document Microchip LAN969x SHA compatible.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Document Microchip LAN969x AES compatible.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Document the Inline Crypto Engine (ICE) on the Milos SoC.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add "loongson,ls2k0300-rtc" dedicated compatible to represent the RTC
interface of the Loongson-2K0300 chip.
Its hardware design is similar to that of the Loongson-1B, but it does
not support the alarm feature.
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/0c6a4fd221b5bf05f06cae9bb543a5bf7ea59f57.1768616276.git.zhoubinbin@loongson.cn
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The `interrupts` property indicates an RTC alarm interrupt, which is
required for RTCs that support the alarm feature, which is not supported
by the Loongson-1C RTC. We exclude it for a more accurate description.
Changing the `allowed` property is ABI-breaking behavior, but
throughout the existing Loongson DTS{i}, the description of the RTC
nodes conforms to the modified bingding rules.
Thus, the existing Loongson DTS{i} will not be affected.
Fixes: 487ef32caebe ("dt-bindings: rtc: Split loongson,ls2x-rtc into SoC-based compatibles")
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/b6295c907410f6708115cba4df0959ee6629f8a5.1768616276.git.zhoubinbin@loongson.cn
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The Renesas RZ/V2N (r9a09g056) RTC is identical to the RZ/V2H
(r9a09g057) variant. Add the compatible string for RZ/V2N and
extend the existing RZ/V2H reset configuration to cover both
variants.
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260125192706.27099-4-ovidiu.panait.rb@renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Merge immutable branch between MFD, Clk, GPIO, Power, Regulator and RTC
due for the v6.20 merge window to apply further cleanups on top of the
BD72720 power-supply driver contained in this branch.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Convert the Android Goldfish Battery binding to DT schema format.
Move the file to the power/supply directory to match the subsystem.
Update the example node name to 'battery' to comply with generic node
naming standards.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260113092602.3197681-5-visitorckw@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next
Georgi writes:
interconnect changes for 6.20
This pull request contains the interconnect changes for the 6.20-rc1
merge window. The core and driver changes are listed below.
Core changes:
- Add KUnit tests for core functionality
Driver changes:
- New driver for MediaTek MT8196 EMI
- MediaTek driver fixes
- Support for Glymur BWMONs
- QCS8300 driver topology fix
- Misc cleanups
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-6.20-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: qcom: msm8974: drop duplicated RPM_BUS_{MASTER,SLAVE}_REQ defines
interconnect: qcom: smd-rpm: drop duplicated QCOM_RPM_SMD_KEY_RATE define
dt-bindings: interconnect: qcom-bwmon: Document Glymur BWMONs
interconnect: qcom: qcs8300: fix the num_links for nsp icc node
interconnect: Add kunit tests for core functionality
dt-bindings: interconnect: qcom,qcs615-rpmh: Drop IPA interconnects
interconnect: mediatek: Aggregate bandwidth with saturating add
interconnect: mediatek: Don't hijack parent device
interconnect: mediatek: Add support for MediaTek MT8196 EMI ICC
dt-bindings: interconnect: mt8183-emi: Add support for MT8196 EMI
|
|
For 32-bit Altera SoCFPGA parts, the sys-mgr uses the syscon as a fallback.
This change addresses this warning from dtbs_check:
sysmgr@ffd08000 (altr,sys-mgr): compatible: 'oneOf' conditional failed, one
must be fixed:
['altr,sys-mgr', 'syscon'] is too long
'altr,sys-mgr-s10' was expected
'altr,sys-mgr' was expected
from schema $id: http://devicetree.org/schemas/soc/altera/altr,sys-mgr.yaml
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
For all SoCFPGA platforms, whether it has the "intel" or "altr" vendor
prefix are referring to the same business unit that is responsible for
the platform. And now that Altera has spun off to be a separate corporate
entity from Intel, it would make sense to have the device bindings
documentation in the same file.
Move the Intel AgileX board binding documentations into the same file that
contains the Altera ones.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Add compatible for Agilex5 SoCFPGA modular board.
Signed-off-by: Niravkumar L Rabara <niravkumarlaxmidas.rabara@altera.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
The firmware-name property was originally introduced to allow end-users
and integrators to select use-case-specific firmware for the WCN6855.
However, specifying firmware for an M.2 WLAN module in the Device Tree
is not appropriate. Instead, this functionality will be handled within
the ath11k driver. Therefore, the firmware-name property is now
deprecated.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Miaoqing Pan <miaoqing.pan@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260121095055.3683957-3-miaoqing.pan@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Another fairly large set of changes, notably:
- cfg80211/mac80211
- most of EPPKE/802.1X over auth frames support
- additional FTM capabilities
- split up drop reasons better, removing generic RX_DROP
- NAN cleanups/fixes
- ath11k:
- support for Channel Frequency Response measurement
- ath12k:
- support for the QCC2072 chipset
- iwlwifi:
- partial NAN support
- UNII-9 support
- some UHR/802.11bn FW APIs
- remove most of MLO/EHT from iwlmvm
(such devices use iwlmld)
- rtw89:
- preparations for RTL8922DE support
* tag 'wireless-next-2026-01-29' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (184 commits)
wifi: iwlegacy: add missing mutex protection in il4965_store_tx_power()
wifi: iwlegacy: add missing mutex protection in il3945_store_measurement()
wifi: mac80211: use u64_stats_t with u64_stats_sync properly
wifi: p54: Fix memory leak in p54_beacon_update()
wifi: cfg80211: treat deprecated INDOOR_SP_AP_OLD control value as LPI mode
wifi: rtw88: sdio: Migrate to use sdio specific shutdown function
wifi: rsi: sdio: Migrate to use sdio specific shutdown function
sdio: Provide a bustype shutdown function
wifi: nl80211/cfg80211: support operating as RSTA in PMSR FTM request
wifi: nl80211/cfg80211: add negotiated burst period to FTM result
wifi: nl80211/cfg80211: clarify periodic FTM parameters for non-EDCA based ranging
wifi: nl80211/cfg80211: add new FTM capabilities
wifi: iwlwifi: rename struct iwl_mcc_allowed_ap_type_cmd::offset_map
wifi: iwlwifi: mvm: Remove link_id from time_events
wifi: iwlwifi: mld: change cluster_id type to u8 array
wifi: iwlwifi: support V13 of iwl_lari_config_change_cmd
wifi: iwlwifi: split bios_value_u32 to separate the header
wifi: iwlwifi: uefi: cache the DSM functions
wifi: iwlwifi: acpi: cache the DSM functions
wifi: iwlwifi: mvm: Cleanup MLO code
...
====================
Link: https://patch.msgid.link/20260129110136.176980-39-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.19-rc8).
No adjacent changes, conflicts:
drivers/net/ethernet/spacemit/k1_emac.c
2c84959167d64 ("net: spacemit: Check for netif_carrier_ok() in emac_stats_update()")
f66086798f91f ("net: spacemit: Remove broken flow control support")
https://lore.kernel.org/aXjAqZA3iEWD_DGM@sirena.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert Macronix Raw NAND Controller Device Tree binding to DT Schema.
Signed-off-by: Akhila YS <akhilayalmati@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Convert STMicroelectronics SPEAr600 Serial Memory Interface (SMI)
Controller binding to YAML format.
Signed-off-by: Akhila YS <akhilayalmati@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Commit bd3f305886ad ("dt-bindings: bluetooth: qualcomm: describe the
inputs from PMU for wcn7850") changed the binding to new description
with a Power Management Unit (PMU), thus certain power-controller
properties are considered deprecated and are part of that PMUs binding.
Deprecate them to mark clearly that new PMU-based approach is preferred.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
One big Qualcomm Bluetooth schema is hardly manageable: it lists all
possible properties (19 supplies). Split qcom,wcn7850-bt to separate
bindings, so device schema will be easier to read/maintain and list only
relevant properties. Re-shuffle few properties to alphabetical order
while moving them and drop redundant enable-gpios description.
This makes the source qualcomm-bluetooth.yaml binding empty, thus drop
it making entire change a variant of file rename.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Commit 5f4f954bba12 ("dt-bindings: bluetooth: bring the HW description
closer to reality for wcn6855") changed the binding to new description
with a Power Management Unit (PMU), thus certain power-controller
properties are considered deprecated and are part of that PMUs binding.
Deprecate them to mark clearly that new PMU-based approach is preferred.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
One big Qualcomm Bluetooth schema is hardly manageable: it lists all
possible properties (19 supplies). Split qcom,wcn6855-bt to separate
bindings, so device schema will be easier to read/maintain and list only
relevant properties.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Commit cca4fe34979a ("dt-bindings: bluetooth: Utilize PMU abstraction
for WCN6750") changed the binding to new description with a Power
Management Unit (PMU), thus certain power-controller properties are
considered deprecated and are part of that PMUs binding.
Deprecate them to mark clearly that new PMU-based approach is preferred.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
One big Qualcomm Bluetooth schema is hardly manageable: it lists all
possible properties (19 supplies). Split qcom,wcn6750-bt to separate
bindings, so device schema will be easier to read/maintain and list only
relevant properties.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
One big Qualcomm Bluetooth schema is hardly manageable: it lists all
possible properties (19 supplies). Split qcom,wcn3990-bt to separate
bindings, so device schema will be easier to read/maintain and list only
relevant properties.
This binding is very similar to qcom,wcn3950-bt, however devices have
additional VDD_CH1 supply.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
One big Qualcomm Bluetooth schema is hardly manageable: it lists all
possible properties (19 supplies). Split qcom,wcn3950-bt to separate
bindings, so device schema will be easier to read/maintain and list only
relevant properties.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
One big Qualcomm Bluetooth schema is hardly manageable: it lists all
possible properties (19 supplies). Split qcom,qca6390-bt to separate
bindings, so device schema will be easier to read/maintain and list only
relevant properties.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
One big Qualcomm Bluetooth schema is hardly manageable: it lists all
possible properties (19 supplies). Split qcom,qca9377-bt to separate
bindings, so device schema will be easier to read/maintain and list only
relevant properties.
Existing binding has incomplete and incorrect list of supplies (e.g.
there is no VDD_XO) and Linux driver does not ask for any, thus keep
this state unchanged.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
One big Qualcomm Bluetooth schema is hardly manageable: it lists all
possible properties (19 supplies). Split common part and
qcom,qca2066-bt to separate bindings, so each schema will be easier to
read/maintain and list only relevant properties.
The existing bindings do not mention interrupts, but
am335x-sancloud-bbe-extended-wifi.dts already defines such. This issue
is not being fixed here.
Existing binding also did not mention any supplies (which do exist as
confirmed in datasheet) and Linux driver does not ask for any, thus keep
this state unchanged.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Convert RTC devicetree bindings for the Motorola CPCAP MFD from TXT to
YAML format. This patch does not change any functionality; the bindings
remain the same.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://patch.msgid.link/20260125134302.45958-7-clamor95@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
soc/drivers
Reset controller updates for v6.20
* Add a compatible to the reset-gpio driver, suppress the sysfs bind
attributes, and propagate GPIO API errors.
* Add support for the i.MX8ULP SIM LPAV reset controller.
* Add RZ/G3S USBPHY suspend/resume support.
* Enable reset-k230 by default on ARCH_CANAAN
* Add support for the SpacemiT K3 SoC reset controller.
* Merge the 'spacemit-clkrst-v6.20-3' tag, shared with the clk tree,
as a dependency for the SpacemiT changes.
* tag 'reset-for-v6.20' of https://git.pengutronix.de/git/pza/linux:
reset: spacemit: Add SpacemiT K3 reset driver
reset: spacemit: Extract common K1 reset code
reset: Create subdirectory for SpacemiT drivers
dt-bindings: soc: spacemit: Add K3 reset support and IDs
reset: canaan: k230: drop OF dependency and enable by default
reset: rzg2l-usbphy-ctrl: Add suspend/resume support
reset: rzg2l-usbphy-ctrl: Propagate the return value of regmap_field_update_bits()
reset: gpio: check the return value of gpiod_set_value_cansleep()
reset: imx8mp-audiomix: Support i.MX8ULP SIM LPAV
reset: imx8mp-audiomix: Extend the driver usage
reset: imx8mp-audiomix: Switch to using regmap API
reset: imx8mp-audiomix: Drop unneeded macros
reset: gpio: suppress bind attributes in sysfs
clk: spacemit: k3: extract common header
reset: spacemit: fix auxiliary device id
clk: spacemit: prepare common ccu header
reset: gpio: add the "compatible" property
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into soc/drivers
Memory controller drivers for v6.20
1. Mediatek SMI: Fix old struct device reference leaks during error
paths and device unbinding.
2. Memory Devicetree bindings: refactor existing LPDDR bindings and add
bindings for DDR4 SDRAM. These will be used for example in
stm32mp257f-ev1 DTS.
* tag 'memory-controller-drv-6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
dt-bindings: memory: SDRAM channel: standardise node name
dt-bindings: memory: add DDR4 channel compatible
dt-bindings: memory: factorise LPDDR channel binding into SDRAM channel
dt-bindings: memory: introduce DDR4
dt-bindings: memory: factorise LPDDR props into SDRAM props
memory: mtk-smi: clean up device link creation
memory: mtk-smi: fix device leak on larb probe
memory: mtk-smi: fix device leaks on common probe
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/drivers
MediaTek soc driver updates
This adds:
- A socinfo entry for the MT8371 Genio 520 SoC
- Support for the Dynamic Voltage and Frequency Scaling
Resource Controller (DVFSRC) version 4, found in the
new MediaTek Kompanio Ultra (MT8196) SoC
- Initial support for the CMDQ mailbox found in the MT8196.
- A memory leak fix in the MediaTek SVS driver's debug ops.
* tag 'mtk-soc-for-v6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
soc: mediatek: mtk-cmdq: Add mminfra_offset adjustment for DRAM addresses
soc: mediatek: mtk-cmdq: Extend cmdq_pkt_write API for SoCs without subsys ID
soc: mediatek: mtk-cmdq: Add pa_base parsing for hardware without subsys ID support
soc: mediatek: mtk-cmdq: Add cmdq_get_mbox_priv() in cmdq_pkt_create()
mailbox: mtk-cmdq: Add driver data to support for MT8196
mailbox: mtk-cmdq: Add mminfra_offset configuration for DRAM transaction
mailbox: mtk-cmdq: Add GCE hardware virtualization configuration
mailbox: mtk-cmdq: Add cmdq private data to cmdq_pkt for generating instruction
soc: mediatek: mtk-dvfsrc: Rework bandwidth calculations
soc: mediatek: mtk-dvfsrc: Get and Enable DVFSRC clock
soc: mediatek: mtk-dvfsrc: Add support for DVFSRCv4 and MT8196
soc: mediatek: mtk-dvfsrc: Write bandwidth to EMI DDR if present
soc: mediatek: mtk-dvfsrc: Add a new callback for calc_dram_bw
soc: mediatek: mtk-dvfsrc: Add and propagate DVFSRC bandwidth type
soc: mediatek: mtk-dvfsrc: Change error check for DVFSRCv4 START cmd
dt-bindings: soc: mediatek: dvfsrc: Document clock
soc: mediatek: mtk-socinfo: Add entry for MT8371AV/AZA Genio 520
soc: mediatek: svs: Fix memory leak in svs_enable_debug_write()
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Extend the existing Tegra186 GPIO controller device tree bindings with
support for the GPIO controller found on Tegra264. The number of pins
is slightly different, but the programming model remains the same.
Add a new header, include/dt-bindings/gpio/nvidia,tegra264-gpio.h,
that defines port IDs as well as the TEGRA264_MAIN_GPIO() helper,
both of which are used in conjunction to create a unique specifier
for each pin.
On Tegra, GPIO wake events are latched and routed via the PMC.
Document the standard DT property, wakeup-parent, which is a phandle to
the PMC interrupt controller that provides the parent wake interrupt
domain for the GPIO controller. If the property is absent the driver
falls back to a compatible-based lookup.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260128085114.1137725-1-pshete@nvidia.com
[Bartosz: fixed whitespace errors]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt
RISC-V Devicetrees for v6.20 (or v7.0)
Anlogic:
Minor change to the extension information, to add the "b" extension
that's a catch-all for 3 of the extensions already in the dts.
Starfive:
Append the jh7110 compatible to jh7110s devicetrees, as that will enable
OpenSBI etc to run without adding support for this minor variant. The
"s" device differs from the non "s" device only in
thermal limits and voltage/frequency characteristics.
Microchip:
Redo the mpfs clock setup yet again, to something approaching correct.
The original binding conjured up for the platform was wildly inaccurate,
and even with the original improvements, a bigger change to using
syscons was required to support several peripherals that also inhabit
the memory regions that the clocks lie in. The damage to the dts isn't
that bad in the end, and of course the whole thing has been done in a
backwards compatible manner, with the code changes being merged a cycle
or two ago in the kernel and like a year ago in U-Boot (the only other
user that I am aware of).
Generic:
Additions to extensions.yaml, mainly for things in the "rva23" profile
that appear for the first time on the Spacemit K3 SoC.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-for-v6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: anlogic: dr1v90: Add "b" ISA extension
dt-bindings: riscv: extensions: Drop unnecessary select schema
dt-bindings: riscv: Add Sha and its comprised extensions
dt-bindings: riscv: Add Ssccptr, Sscounterenw, Sstvala, Sstvecd, Ssu64xl
dt-bindings: riscv: Add descriptions for Za64rs, Ziccamoa, Ziccif, and Zicclsm
dt-bindings: riscv: Add B ISA extension description
dt-bindings: riscv: update ratified version of h, svinval, svnapot, svpbmt
riscv: dts: starfive: Append JH-7110 SoC compatible to VisionFive 2 Lite eMMC board
riscv: dts: starfive: Append JH-7110 SoC compatible to VisionFive 2 Lite board
dt-bindings: riscv: starfive: Append JH-7110 SoC compatible to VisionFive 2 Lite board
riscv: dts: microchip: convert clock and reset to use syscon
riscv: dts: microchip: fix mailbox description
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Define compatible strings for Realtek RTD1501s, RTD1861b and RTD1920s.
Additionally, convert legacy DTS-style comments to YAML description
properties, following the pattern from the ARM bindings conversion series
[1].
[1] https://lore.kernel.org/lkml/20200622125527.24207-2-afaerber@suse.de/
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20260127071530.25426-2-eleanor15x@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The label is useless here. Plus, if there are several examples with the
same label, we'll get very useless yet annoying warnings.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Miquel Raynal (Schneider Electric) <miquel.raynal@bootlin.com>
Tested-by: Santhosh Kumar K <s-k6@ti.com>
Link: https://patch.msgid.link/20260122-schneider-6-19-rc1-qspi-v4-1-f9c21419a3e6@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
More Qualcomm Arm64 DeviceTree updates for v6.20
Enable ADSP FastRPC and add missing GPU memory regions on Agatti.
Also add the missing GPU regions on SM6115.
Describe the application subsystem watchdog on Hamoa and enable this in
the EL2 configurations.
Add the camera control interface (CCI) I2C controller on MSM8953, and
describe the camera regulators and the camera EEPROM on Fairphone FP3.
Specify clock frequency for the i2c4 bus on OnePlus 6, to silence the
warnings about missing frequency definition.
Add FastRPC and associated heap memory, as well as Coresight, on SM8750
Switch a variety of platforms to use the generic RPMPD_ constants,
instead of target-specific duplicated, to allow us to drop these from
the header files.
Drop the invalid opp-shared on the QUP OPP table for Talos.
* tag 'qcom-arm64-for-6.20-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: sm6115: Add CX_MEM/DBGC GPU regions
arm64: dts: qcom: agatti: Add CX_MEM/DBGC GPU regions
arm64: dts: qcom: sm8750: add ADSP fastrpc-compute-cb nodes
arm64: dts: qcom: sm8750: add memory node for adsp fastrpc
arm64: dts: qcom: switch to RPMPD_* indices
arm64: dts: qcom: oneplus-enchilada: Specify i2c4 clock frequency
arm64: dts: qcom: sm6350: Add clocks for aggre1 & aggre2 NoC
arm64: dts: qcom: agatti: enable FastRPC on the ADSP
arm64: qcom: dts: sm8750: add coresight nodes
arm64: dts: qcom: talos: Drop opp-shared from QUP OPP table
arm64: dts: qcom: x1-el2: Enable the APSS watchdog
arm64: dts: qcom: hamoa: Add the APSS watchdog
dt-bindings: watchdog: Document X1E80100 compatible
arm64: dts: qcom: sdm632-fairphone-fp3: Enable CCI and add EEPROM
arm64: dts: qcom: sdm632-fairphone-fp3: Add camera fixed regulators
arm64: dts: qcom: msm8953: Add CCI nodes
arm64: dts: qcom: msm8953: Re-sort tlmm pinctrl states
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New boards: Anberic RG-DS game console, Radxa CM3J module + baseboard
for the Rpi CM4 IO board, QNAP TS133 from the RK3568 NAS series.
2 display outputs for the Lion board (old RK3368), TPS65185 pmic for the
PineNote and fixes for the PCIe ranges on both RK356x and RK3588.
These came quite late, so I wanted to give them the time till 6.20-rc1
and have them migrate to stable-kernels afterwards.
The rest is small stuff on a number of boards wrt gpios and compatibles.
* tag 'v6.20-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (25 commits)
arm64: dts: rockchip: Fix rk3588 PCIe range mappings
arm64: dts: rockchip: Fix rk356x PCIe range mappings
arm64: dts: rockchip: Add Anbernic RG-DS
dt-bindings: input: touchscreen: goodix: Add "panel" property
dt-bindings: arm: rockchip: Add Anbernic RG-DS
arm64: dts: rockchip: Explicitly request UFS reset pin on RK3576
arm64: dts: rockchip: Add TPS65185 for PineNote
arm64: dts: rockchip: Do not enable hdmi_sound node on Pinebook Pro
arm64: dts: rockchip: Fix imx258 variant on pinephone pro
arm64: dts: rockchip: Add the Video-Demo overlay for Lion Haikou
arm64: dts: rockchip: Enable pwm1 on rk3368-lion-haikou
arm64: dts: rockchip: Enable HDMI output on RK3368-Lion-Haikou
arm64: dts: rockchip: Add HDMI node to RK3368
arm64: dts: rockchip: Use phandle for i2c_lvds_blc on rk3368-lion haikou
arm64: dts: rockchip: Fix SD card support for RK3576 Nanopi R76s
arm64: dts: rockchip: Fix SD card support for RK3576 EVB1
arm64: dts: rockchip: Add Radxa CM3J on RPi CM4 IO Board
arm64: dts: rockchip: Add Radxa CM3J
dt-bindings: arm: rockchip: Add Radxa CM3J on RPi CM4 IO Board
arm64: dts: rockchip: Make eeprom read-only for Radxa ROCK 3C/5A/5C
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/cix into soc/dt
- Add OrangePi 6 Plus board
* tag 'cix-dt-binding-v6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/cix:
dt-bindings: arm: cix: add OrangePi 6 Plus board
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt
Microchip AT91 device tree updates for v6.20
This update includes:
- update the SAMA7D65 flexcom nodes to add the missing i2c, spi, and usart
child nodes; the flexcom child nodes were also updated with DMA
properties
- add basic support for the PCB8385 board, based on LAN966X SoC
- drop usb_a9g20-dab-mmx.dtsi as it is not used anywhere in the tree
* tag 'at91-dt-6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: microchip: Drop usb_a9g20-dab-mmx.dtsi
ARM: dts: Add support for pcb8385
dt-bindings: arm: at91: add lan966 pcb8385 board
ARM: dts: microchip: sama7d65: add missing flexcom nodes
ARM: dts: microchip: sama7d65: add fifo-size to usart
ARM: dts: microchip: sama7d65: add dma properties to usart6
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt
MediaTek ARM64 Device Tree updates
This adds support for new boards and variants based on different
already supported MediaTek SoCs, and improves support for current
boards.
In particular:
- New machines:
- Ezurio Tungsten 510 (MediaTek Genio 510 SoC)
- Ezurio Tungsten 700 (MediaTek Genio 700 SoC)
...improvements for already supported SoCs and machines:
- MT7981b gains support for PCI-Express, USB, Ethernet and for
the "GED" WiFi HW offload
- OpenWRT One board gains support for the same
- MT8188/8195/8390/8395 gains support for the DPI1 interface
and HDMI output from the SoC's HDMI Tx controller along with
its HDMI PHY and DDC IPs, usable on a selection of boards
that expose a HDMI connector, namely:
- All MT8390 Genio EVK based boards
- All MT8395 Genio EVK based boards
- Radxa NIO-12L (MT8395)
...and dtbs_check warning fixes for many of the MTK devicetrees,
including MT6795, MT7981, MT7986, MT7988, MT8173, MT8183, MT8186,
MT8188, MT8192, and a dts coding style fix for Airoha EN7581-EVB.
This also includes a fix for the new devicetree overlay warnings,
adding dtbs with applied overlays for all of the devices having
at least one overlay.
* tag 'mtk-dts64-for-v6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: (47 commits)
arm64: dts: mediatek: mt8192: Rename mt8192-afe-pcm to audio-controller
dt-bindings: arm: mediatek: audsys: Support mt8192-audsys variant
arm64: dts: mediatek: mt7988a: Fix PCI-Express T-PHY node address
arm64: dts: mediatek: mt8186-evb: Add vproc fixed regulator
arm64: dts: mediatek: mt7981b-openwrt-one: Add address/size cells to eth
arm64: dts: mediatek: mt8183-kukui: Clean up IT6505 regulator supply
arm64: dts: mediatek: mt7986a: Change compatible for SafeXcel crypto
arm64: dts: mediatek: mt8173-evb: Add interrupts to DA9211 regulator
arm64: dts: mediatek: mt6795-xperia-m5: Rename PMIC leds node
arm64: dts: mediatek: mt6795: Fix issues in SCPSYS node
arm64: dts: mediatek: mt6331: Fix VCAM IO regulator name
arm64: dts: mediatek: mt6795-xperia-m5: Add UHS pins for MMC1 and 2
arm64: dts: mediatek: mt8192-asurada: Remove unused clock-stretch-ns
arm64: dts: mediatek: mt8173-elm: Remove regulators from thermal node
arm64: dts: mediatek: mt8173-elm: Fix dsi0 ports warning
arm64: dts: mediatek: mt8173-elm: Fix bluetooth node name and reorder
arm64: dts: mediatek: mt8183-pumpkin: Fix pinmux node names
arm64: dts: mediatek: mt8183-jacuzzi-pico6: Fix typo in pinmux node
arm64: dts: mediatek: mt7981b-openwrt-one: Remove useless cells from flash@0
arm64: dts: mediatek: mt8183-evb: Fix dtbs_check warnings
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt
Amlogic ARM64 DT for v6.20:
- Cleanups:
- Use lowercase hex
- Use hyphen in node names
- move CPU OPP table and clock assignment to SoC.dtsi
- drop useless assigned-clock-parents
- MMC clock fixup across multiple families
- Add type-c controller on Radxa Zero 2 and enable NPU
- New board:
- Khadas VIM1s based on Amlogic S4
* tag 'amlogic-arm64-dt-for-v6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
arm64: dts: amlogic: meson-s4-s905y4-khadas-vim1s: enable SDIO interface
arm64: dts: amlogic: add the type-c controller on Radxa Zero 2
arm64: dts: amlogic: meson-sm1-odroid: Eliminate Odroid HC4 power glitches during boot.
arm64: dts: amlogic: meson-s4-s905y4-khadas-vim1s: enable eMMC storage
arm64: dts: meson-s4-s905y4-khadas-vim1s: add initial device tree
arm64: dts: meson-s4-aq222: update compatible string with s805x2
dt-bindings: arm: amlogic: introduce specific compatibles for S4 family
arm64: dts: amlogic: Enable the npu node on Radxa Zero 2
arm64: dts: amlogic: g12: assign the MMC A signal clock
arm64: dts: amlogic: g12: assign the MMC B and C signal clocks
arm64: dts: amlogic: gx: assign the MMC signal clocks
arm64: dts: amlogic: axg: assign the MMC signal clocks
arm64: dts: amlogic: a1: align the mmc clock setup
arm64: dts: amlogic: c3: assign the MMC signal clocks
arm64: dts: amlogic: s4: fix mmc clock assignment
arm64: dts: amlogic: s4: assign mmc b clock to 24MHz
arm64: dts: amlogic: drop useless assigned-clock-parents
arm64: dts: amlogic: move CPU OPP table and clock assignment to SoC.dtsi
arm64: dts: amlogic: Use lowercase hex
arm64: dts: amlogic: Use hyphen in node names
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
into soc/dt
RISC-V SpacemiT DT changes for 6.20
- Disable Ethernet PHY auto sleep mode
- Add pinctrl IO power support
- Add K3 Pico-ITX board
- Add support for K3 SoC
- Add DWC USB support
- Add reset for eMMC(sdhci)/I2C
- Add PCIe support
- Support PMIC for Jupiter board
* tag 'spacemit-dt-for-6.20-1' of https://github.com/spacemit-com/linux:
riscv: dts: spacemit: Disable ETH PHY sleep mode for OrangePi
riscv: dts: spacemit: pinctrl: update register and IO power
riscv: dts: spacemit: add K3 Pico-ITX board support
riscv: dts: spacemit: add initial support for K3 SoC
dt-bindings: riscv: spacemit: add K3 and Pico-ITX board bindings
dt-bindings: interrupt-controller: add SpacemiT K3 IMSIC
dt-bindings: interrupt-controller: add SpacemiT K3 APLIC
dt-bindings: timer: add SpacemiT K3 CLINT
dt-bindings: riscv: add SpacemiT X100 CPU compatible
riscv: dts: spacemit: k1: Add "b" ISA extension
riscv: dts: spacemit: Enable USB3.0 on BananaPi-F3
riscv: dts: spacemit: Add DWC3 USB 3.0 controller node for K1
riscv: dts: spacemit: Add USB2 PHY node for K1
riscv: dts: spacemit: sdhci: add reset support
riscv: dts: spacemit: add reset property
riscv: dts: spacemit: PCIe and PHY-related updates
riscv: dts: spacemit: Add a PCIe regulator
riscv: dts: spacemit: Define the P1 PMIC regulators for Milk-V Jupiter
riscv: dts: spacemit: Define fixed regulators for Milk-V Jupiter
riscv: dts: spacemit: Enable i2c8 adapter for Milk-V Jupiter
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
