| Age | Commit message (Collapse) | Author |
|---|
|
Avoid division by zero when sampling frequency is unspecified.
Fixes: 60df548277b7 ("iio: proximity: Add driver support for TYHX's HX9023S capacitive proximity sensor")
Signed-off-by: Yasin Lee <yasin.lee.x@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Initialize fw_size before copying firmware data into the flexible
array member to match the __counted_by() annotation. This fixes the
incorrect assignment order that triggers runtime safety checks.
Fixes: e9ed97be4fcc ("iio: proximity: hx9023s: Added firmware file parsing functionality")
Signed-off-by: Yasin Lee <yasin.lee.x@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This function refers to the Bosch BME680 API as the source of the
calculation, but one of the constants does not match the Bosch
implementation. This appears to be a simple transposition of two digits,
resulting in a wait time that is too short. This can cause the following
'device measurement cycle incomplete' check to occasionally fail, returning
EBUSY to user space.
Adjust the constant to match the Bosch implementation and resolve the EBUSY
errors.
Fixes: 4241665e6ea0 ("iio: chemical: bme680: Fix sensor data read operation")
Link: https://github.com/boschsensortec/BME68x_SensorAPI/blob/v4.4.8/bme68x.c#L521
Signed-off-by: Chris Spencer <spencercw@gmail.com>
Acked-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The DS442x DAC uses sign-magnitude encoding, so -128 cannot be represented
in hardware (7-bit magnitude).
Previously, passing -128 resulted in a truncated value that programmed
0mA (magnitude 0) instead of the expected maximum negative current,
effectively failing silently.
Reject -128 to avoid producing the wrong current.
Fixes: d632a2bd8ffc ("iio: dac: ds4422/ds4424 dac driver")
Cc: stable@vger.kernel.org
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Drive bit must be set for open-drain mode and be cleared for push-pull
mode.
Referring to datasheet DS-000576_ICM-45605.pdf section 17.23
INT1_CONFIG2.
Fixes: 06674a72cf7a ("iio: imu: inv_icm45600: add buffer support in iio devices")
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The MCP4131 wiper address is shifted twice when preparing the SPI
command in mcp4131_write_raw().
The address is already shifted when assigned to the local variable
"address", but is then shifted again when written to data->buf[0].
This results in an incorrect command being sent to the device and
breaks wiper writes to the second channel.
Remove the second shift and use the pre-shifted address directly
when composing the SPI transfer.
Fixes: 22d199a53910 ("iio: potentiometer: add driver for Microchip MCP413X/414X/415X/416X/423X/424X/425X/426X")
Signed-off-by: Lukas Schmid <lukas.schmid@netcube.li>#
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
IRQ needs to be acked. for some odd reasons, reading from irq status does
not reliable help, enable acking from any register to be on the safe side
and read the irq status register. Comments in the code indicate a known
unreliability with that register.
The blamed commit was tested with mpu6050 in lg,p895 and lg,p880 according
to Tested-bys. But with the MPU9150 in the Epson Moverio BT-200 this leads
to irq storms without properly acking the irq.
Fixes: 0a3b517c8089 ("iio: imu: inv_mpu6050: fix interrupt status read for old buggy chips")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The regmap_read_poll_timeout() uses ADF4377_0000_SOFT_RESET_R_MSK
twice instead of checking both SOFT_RESET_MSK (bit 0) and
SOFT_RESET_R_MSK (bit 7). This causes an incomplete reset status check.
The code first sets both SOFT_RESET and SOFT_RESET_R bits to 1 via
regmap_update_bits(), then polls for them to be cleared. Since we set
both bits before polling, we should be waiting for both to clear.
Fix by using both masks as done in regmap_update_bits() above.
Fixes: eda549e2e524 ("iio: frequency: adf4377: add support for ADF4377")
Signed-off-by: SeungJu Cheon <suunj1331@gmail.com>
Cc: Stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Move pm_runtime_put_autosuspend() before the error check to ensure
the PM runtime reference count is always decremented after
pm_runtime_get_sync(), regardless of whether the read operation
succeeds or fails.
Fixes: 1f0477f18306 ("iio: light: new driver for the ROHM BH1780")
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
ODR switch is done in 2 steps when FIFO is on : change the ODR register
value and acknowledge change when reading the FIFO ODR change flag.
When we are switching odr and turning buffer off just afterward, we are
losing the FIFO ODR change flag and ODR switch is blocked.
Fix the issue by force applying any waiting ODR change when turning
buffer off.
Fixes: ec74ae9fd37c ("iio: imu: inv_icm42600: add accurate timestamping")
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
ODR switch is done in 2 steps when FIFO is on : change the ODR register
value and acknowledge change when reading the FIFO ODR change flag.
When we are switching to the same odr value, we end up waiting for a
FIFO ODR flag that is never happening.
Fix the issue by doing nothing and exiting properly when we are
switching to the same ODR value.
Fixes: ec74ae9fd37c ("iio: imu: inv_icm42600: add accurate timestamping")
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
When probe of the sdio brcmfmac device fails for some reasons (i.e.
missing firmware), the sdiodev->bus is set to error instead of NULL, thus
the cleanup later in brcmf_sdio_remove() tries to free resources via
invalid bus pointer. This happens because sdiodev->bus is set 2 times:
first in brcmf_sdio_probe() and second time in brcmf_sdiod_probe(). Fix
this by chaning the brcmf_sdio_probe() function to return the error code
and set sdio->bus only there.
Fixes: 0ff0843310b7 ("wifi: brcmfmac: Add optional lpo clock enable support")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Arend van Spriel<arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260203102133.1478331-1-m.szyprowski@samsung.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The radiotap parser is currently only used with the radiotap
namespace (not with vendor namespaces), but if the undefined
field 18 is used, the alignment/size is unknown as well. In
this case, iterator->_next_ns_data isn't initialized (it's
only set for skipping vendor namespaces), and syzbot points
out that we later compare against this uninitialized value.
Fix this by moving the rejection of unknown radiotap fields
down to after the in-namespace lookup, so it will really use
iterator->_next_ns_data only for vendor namespaces, even in
case undefined fields are present.
Cc: stable@vger.kernel.org
Fixes: 33e5a2f776e3 ("wireless: update radiotap parser")
Reported-by: syzbot+b09c1af8764c0097bb19@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/69944a91.a70a0220.2c38d7.00fc.GAE@google.com
Link: https://patch.msgid.link/20260217120526.162647-2-johannes@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There is a use-after-free error in cfg80211_shutdown_all_interfaces found
by syzkaller:
BUG: KASAN: use-after-free in cfg80211_shutdown_all_interfaces+0x213/0x220
Read of size 8 at addr ffff888112a78d98 by task kworker/0:5/5326
CPU: 0 UID: 0 PID: 5326 Comm: kworker/0:5 Not tainted 6.19.0-rc2 #2 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: events cfg80211_rfkill_block_work
Call Trace:
<TASK>
dump_stack_lvl+0x116/0x1f0
print_report+0xcd/0x630
kasan_report+0xe0/0x110
cfg80211_shutdown_all_interfaces+0x213/0x220
cfg80211_rfkill_block_work+0x1e/0x30
process_one_work+0x9cf/0x1b70
worker_thread+0x6c8/0xf10
kthread+0x3c5/0x780
ret_from_fork+0x56d/0x700
ret_from_fork_asm+0x1a/0x30
</TASK>
The problem arises due to the rfkill_block work is not cancelled when wiphy
is being unregistered. In order to fix the issue cancel the corresponding
work in wiphy_unregister().
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 1f87f7d3a3b4 ("cfg80211: add rfkill support")
Cc: stable@vger.kernel.org
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Link: https://patch.msgid.link/20260211082024.1967588-1-d.dulov@aladdin.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The IGTK key ID must be 4 or 5, but the code checks against
key ID + 1, so must check against 5/6 rather than 4/5. Fix
that.
Reported-by: Jouni Malinen <j@w1.fi>
Fixes: 08645126dd24 ("cfg80211: implement wext key handling")
Link: https://patch.msgid.link/20260209181220.362205-2-johannes@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
'phys' may include an offset within the page, while previously used
'base_paddr' was already page-aligned. This caused incorrect DMA mapping
in dma_4u_map_phys and dma_4v_map_phys.
Fix both functions by masking 'phys' with IO_PAGE_MASK, covering both
generic SPARC code and sun4v.
Fixes: 38c0d0ebf520 ("sparc: Use physical address DMA mapping")
Reported-by: Stian Halseth <stian@itx.no>
Closes: https://github.com/sparclinux/issues/issues/75
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Stian Halseth <stian@itx.no>
Tested-by: Nathaniel Roach <nroach44@nroach44.id.au>
Tested-by: Han Gao <gaohan@iscas.ac.cn> # on SPARC Enterprise T5220
[mszyprow: adjusted commit description a bit]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260218120056.3366-2-stian@itx.no
|
|
dma_addr is unitialized in dma_direct_map_phys() when swiotlb is forced
and DMA_ATTR_MMIO is set which leads to random value print out in
warning. Fix that by just returning DMA_MAPPING_ERROR.
Fixes: e53d29f957b3 ("dma-mapping: convert dma_direct_*map_page to be phys_addr_t based")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260209153809.250835-2-jiri@resnulli.us
|
|
smb_direct_prepare_negotiation() casts an unsigned __u32 value
from sp->max_recv_size and req->preferred_send_size to a signed
int before computing min_t(int, ...). A maliciously provided
preferred_send_size of 0x80000000 will return as smaller than
max_recv_size, and then be used to set the maximum allowed
alowed receive size for the next message.
By sending a second message with a large value (>1420 bytes)
the attacker can then achieve a heap buffer overflow.
This fix replaces min_t(int, ...) with min_t(u32)
Fixes: 0626e6641f6b ("cifsd: add server handler for central processing and tranport layers")
Signed-off-by: Nicholas Carlini <nicholas@carlini.com>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
To prevent timing attacks, MAC comparisons need to be constant-time.
Replace the memcmp() with the correct function, crypto_memneq().
Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Currently, the define_read!() and define_write!() I/O macros are crate
public. The only user outside of the I/O module is PCI (for the
configurations space I/O backend). Consequently, when CONFIG_PCI=n this
causes a compile time warning [1].
In order to fix this, rename the macros to io_define_read!() and
io_define_write!() and use #[macro_export] to export them.
This is better than making the crate public visibility conditional, as
eventually subsystems will have their own crate.
Also, I/O backends are valid to be implemented by drivers as well. For
instance, there are devices (such as GPUs) that run firmware which
allows to program other devices only accessible through the primary
device through indirect I/O.
Since the macros are now public, also add the corresponding
documentation.
Fixes: 121d87b28e1d ("rust: io: separate generic I/O helpers from MMIO implementation")
Reported-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Closes: https://lore.kernel.org/driver-core/CANiq72khOYkt6t5zwMvSiyZvWWHMZuNCMERXu=7K=_5tT-8Pgg@mail.gmail.com/ [1]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://patch.msgid.link/20260216131534.65008-1-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Update the example devicetree with unique regulator names for all
regulators. This reflects the same change made to the actual .dtsi file.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260219-mtk-mt6359-fix-regulator-names-v1-2-ee0fcebfe1d9@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
According to the AHT20 datasheet (updated to V1.0 after the 2023.09
version), the initialization command for AHT20 is 0b10111110 (0xBE).
The previous sequence (0xE1) used in earlier versions is no longer
compatible with newer AHT20 sensors. Update the initialization
command to ensure the sensor is properly initialized.
While at it, use binary notation for DHT20_CMD_INIT to match the notation
used in the datasheet.
Fixes: d2abcb5cc885 ("hwmon: (aht10) Add support for compatible aht20")
Signed-off-by: Hao Yu <haoyufine@gmail.com>
Link: https://lore.kernel.org/r/20260222170332.1616-3-haoyufine@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add a closing '>' to Kalhan's emaill address.
line 60: Kalhan Trisal <kalhan.trisal@intel.com
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20260215010327.1687304-1-rdunlap@infradead.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The macsmc-hwmon driver experienced several issues related to value
scaling and type conversion:
1. macsmc_hwmon_read_f32_scaled() clipped values to INT_MAX/INT_MIN.
On 64-bit systems, hwmon supports long values, so clipping to
32-bit range was premature and caused loss of range for high-power
sensors. Changed it to use long and clip to LONG_MAX/LONG_MIN.
2. The overflow check in macsmc_hwmon_read_f32_scaled() used 1UL,
which is 32-bit on some platforms. Switched to 1ULL.
3. macsmc_hwmon_read_key() used a u32 temporary variable for f32
values. When assigned to a 64-bit long, negative values were
zero-extended instead of sign-extended, resulting in large
positive numbers.
4. macsmc_hwmon_read_ioft_scaled() used mult_frac() which could
overflow during intermediate multiplication. Switched to
mul_u64_u32_div() to handle the 64-bit multiplication safely.
5. ioft values (unsigned 48.16) could overflow long when scaled
by 1,000,000. Added explicit clipping to LONG_MAX in the caller.
6. macsmc_hwmon_write_f32() truncated its long argument to int,
potentially causing issues for large values.
Fix these issues by using appropriate types and helper functions.
Fixes: 785205fd8139 ("hwmon: Add Apple Silicon SMC hwmon driver")
Cc: James Calligeros <jcalligeros99@gmail.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Neal Gompa <neal@gompa.dev>
Cc: Janne Grunau <j@jannau.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20260129175112.3751907-3-linux@roeck-us.net
Reviewed-by: James Calligeros <jcalligeros99@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The recently added macsmc-hwmon driver contained several critical
bugs in its sensor population logic and float conversion routines.
Specifically:
- The voltage sensor population loop used the wrong prefix ("volt-"
instead of "voltage-") and incorrectly assigned sensors to the
temperature sensor array (hwmon->temp.sensors) instead of the
voltage sensor array (hwmon->volt.sensors). This would lead to
out-of-bounds memory access or data corruption when both temperature
and voltage sensors were present.
- The float conversion in macsmc_hwmon_write_f32() had flawed exponent
logic for values >= 2^24 and lacked masking for the mantissa, which
could lead to incorrect values being written to the SMC.
Fix these issues to ensure correct sensor registration and reliable
manual fan control.
Confirm that the reported overflow in FIELD_PREP is fixed by declaring
macsmc_hwmon_write_f32() as __always_inline for a compile test.
Fixes: 785205fd8139 ("hwmon: Add Apple Silicon SMC hwmon driver")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://lore.kernel.org/linux-hwmon/20260119195817.GA1035354@ax162/
Cc: James Calligeros <jcalligeros99@gmail.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Neal Gompa <neal@gompa.dev>
Cc: Janne Grunau <j@jannau.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Nathan Chancellor <nathan@kernel.org> # build only
Link: https://lore.kernel.org/r/20260129175112.3751907-2-linux@roeck-us.net
Reviewed-by: James Calligeros <jcalligeros99@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The siliconid_to_name() function currently masks the input silicon ID
with 0xff00ffff, but compares it against unmasked table entries. This
causes matching to fail if the table entries contain non-zero values in
the bits covered by the mask (bits 16-23).
Update the logic to apply the 0xff00ffff mask to the table entries
during comparison. This ensures that only the relevant model and
revision bits are considered, providing a consistent match across
different manufacturing batches.
[arj: Add Fixes: tag, fix 'soninfo' typo, clarify function reference]
Fixes: e0218dca5787 ("soc: aspeed: Add soc info driver")
Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
Link: https://patch.msgid.link/20260122-soc_aspeed_name_fix-v1-1-33a847f2581c@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
|
|
When device_get_child_node_count() got split to the fwnode and device
respective APIs, the fwnode didn't inherit the ability to traverse over
the secondary fwnode. Hence any user, that switches from device to fwnode
API misses this feature. In particular, this was revealed by the commit
1490cbb9dbfd ("device property: Split fwnode_get_child_node_count()")
that effectively broke the GPIO enumeration on Intel Galileo boards.
Fix this by moving the secondary lookup from device to fwnode API.
Note, in general no device_*() API should go into the depth of the fwnode
implementation.
Fixes: 114dbb4fa7c4 ("drivers property: When no children in primary, try secondary")
Cc: stable@vger.kernel.org
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://patch.msgid.link/20260210135822.47335-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
cifs_pick_channel uses (start % chan_count) when channels are equally
loaded, but that can return a channel that failed the eligibility
checks.
Drop the fallback and return the scan-selected channel instead. If none
is eligible, keep the existing behavior of using the primary channel.
Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Acked-by: Meetakshi Setiya <msetiya@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This reverts commit 6d54d935062e2d4a7d3f779ceb9eeff108d0535d.
It seems there are different variants of the Wifi chipset in use on the
Pinebook Pro. And according to the reported regression - see Closes
below, the reverted change causes issues with one Wifi chipset.
The original commit message indicates a "further description" only and
does not indicate this would fix an actual problem, so a revert should
not cause further problems.
Fixes: 6d54d935062e ("arm64: dts: rockchip: Further describe the WiFi for the Pinebook Pro")
Cc: Jan Palus <jpalus@fastmail.com>
Cc: Peter Robinson <pbrobinson@gmail.com>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: stable@vger.kernel.org
Closes: https://lore.kernel.org/r/aUKOlj-RvTYlrpiS@rock.grzadka/
Tested-by: Jan Palus <jpalus@fastmail.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260210120142.698512-1-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Fix the smatch checking:
drivers/soc/rockchip/grf.c:249 rockchip_grf_init()
warn: inconsistent refcounting 'np->kobj.kref.refcount.refs.counter':
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: 75fb63ae0312 ("soc: rockchip: grf: Support multiple grf to be handled")
Closes: https://lore.kernel.org/all/aYXvgTcUJWQL2can@stanley.mountain/
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://patch.msgid.link/1770814957-17762-1-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
|
|
Pull fsverity fixes from Eric Biggers:
- Fix a build error on parisc
- Remove the non-large-folio-aware function fsverity_verify_page()
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
fsverity: fix build error by adding fsverity_readahead() stub
fsverity: remove fsverity_verify_page()
f2fs: make f2fs_verify_cluster() partially large-folio-aware
f2fs: remove unnecessary ClearPageUptodate in f2fs_verify_cluster()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library fix from Eric Biggers:
"Fix a big endian specific issue in the PPC64-optimized AES code"
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto: powerpc/aes: Fix rndkey_from_vsx() on big endian CPUs
|
|
Stephen retired and stepped back from -next maintainership, update his
entry in CREDITS to recognise his 18 years of hard work making it what
it is today and all the impact it's had on our development process.
Also update to his current GnuPG key while we're here.
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The x509 public key code gained a dependency on the sha256 hash
implementation, causing a rare link time failure in randconfig
builds:
arm-linux-gnueabi-ld: crypto/asymmetric_keys/x509_public_key.o: in function `x509_get_sig_params':
x509_public_key.c:(.text.x509_get_sig_params+0x12): undefined reference to `sha256'
arm-linux-gnueabi-ld: (sha256): Unknown destination type (ARM/Thumb) in crypto/asymmetric_keys/x509_public_key.o
x509_public_key.c:(.text.x509_get_sig_params+0x12): dangerous relocation: unsupported relocation
Select the necessary library code from Kconfig.
Fixes: 2c62068ac86b ("x509: Separately calculate sha256 for blacklist")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Align to the commit bf4afc53b77a ("Convert 'alloc_obj' family to use the
new default GFP_KERNEL argument") update the 'kmalloc_obj' declaration
for userspace to fix below compile error:
In file included from arch/arm/boot/compressed/../../../../lib/decompress_unxz.c:241,
from arch/arm/boot/compressed/decompress.c:56:
arch/arm/boot/compressed/../../../../lib/xz/xz_dec_stream.c: In function 'xz_dec_init':
arch/arm/boot/compressed/../../../../lib/xz/xz_dec_stream.c:787:28: error: implicit declaration of function 'kmalloc_obj'; did you mean 'kmalloc'? [-Wimplicit-function-declaration]
787 | struct xz_dec *s = kmalloc_obj(*s);
| ^~~~~~~~~~~
| kmalloc
Signed-off-by: Haiyue Wang <haiyuewa@163.com>
Fixes: 69050f8d6d07 ("treewide: Replace kmalloc with kmalloc_obj for non-scalar types")
Fixes: bf4afc53b77a ("Convert 'alloc_obj' family to use the new default GFP_KERNEL argument")
Reviewed-by: Kees Cook <kees@kernel.org>
Acked-by: Lasse Collin <lasse.collin@tukaani.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since 3669ddd8fa8b5 ("KVM: arm64: Add a range to pkvm_mappings"),
pKVM tracks the memory that has been mapped into a guest in a
side data structure. Crucially, it uses it to find out whether
a page has already been mapped, and therefore refuses to map it
twice. So far, so good.
However, this very patch completely breaks non-4kB page support,
with guests being unable to boot. The most obvious symptom is that
we take the same fault repeatedly, and not making forward progress.
A quick investigation shows that this is because of the above
rejection code.
As it turns out, there are multiple issues at play:
- while the HPFAR_EL2 register gives you the faulting IPA minus
the bottom 12 bits, it will still give you the extra bits that
are part of the page offset for anything larger than 4kB,
even for a level-3 mapping
- pkvm_pgtable_stage2_map() assumes that the address passed as
a parameter is aligned to the size of the intended mapping
- the faulting address is only aligned for a non-page mapping
When the planets are suitably aligned (pun intended), the guest
faults on a page by accessing it past the bottom 4kB, and extra bits
get set in the HPFAR_EL2 register. If this results in a page mapping
(which is likely with large granule sizes), nothing aligns it further
down, and pkvm_mapping_iter_first() finds an intersection that
doesn't really exist. We assume this is a spurious fault and return
-EAGAIN. And again...
This doesn't hit outside of the protected code, as the page table
code always aligns the IPA down to a page boundary, hiding the issue
for everyone else.
Fix it by always forcing the alignment on vma_pagesize, irrespective
of the value of vma_pagesize.
Fixes: 3669ddd8fa8b5 ("KVM: arm64: Add a range to pkvm_mappings")
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://https://patch.msgid.link/20260222141000.3084258-1-maz@kernel.org
Cc: stable@vger.kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
- loongson: Loongson-2K0300 support
- s35390a: nvmem support
- zynqmp: rework calibration
* tag 'rtc-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: ds1390: fix number of bytes read from RTC
rtc: class: Remove duplicate check for alarm
rtc: optee: simplify OP-TEE context match
rtc: interface: Alarm race handling should not discard preceding error
rtc: s35390a: implement nvmem support
rtc: loongson: Add Loongson-2K0300 support
dt-bindings: rtc: loongson: Document Loongson-2K0300 compatible
dt-bindings: rtc: loongson: Correct Loongson-1C interrupts property
dt-bindings: rtc: renesas,rz-rtca3: Add RZ/V2N support
dt-bindings: rtc: cpcap: convert to schema
rtc: zynqmp: use dynamic max and min offset ranges
rtc: zynqmp: rework set_offset
rtc: zynqmp: rework read_offset
rtc: zynqmp: check calibration max value
rtc: zynqmp: correct frequency value
rtc: amlogic-a4: Remove IRQF_ONESHOT
rtc: pcf8563: use correct of_node for output clock
rtc: max31335: use correct CONFIG symbol in IS_REACHABLE()
rtc: nvvrs: Add ARCH_TEGRA to the NV VRS RTC driver
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- Pass '-Zunstable-options' flag required by the future Rust 1.95.0
- Fix 'objtool' warning for Rust 1.84.0
'kernel' crate:
- 'irq' module: add missing bound detected by the future Rust 1.95.0
- 'list' module: add missing 'unsafe' blocks and placeholder safety
comments to macros (an issue for future callers within the crate)
'pin-init' crate:
- Clean Clippy warning that changed behavior in the future Rust
1.95.0"
* tag 'rust-fixes-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: list: Add unsafe blocks for container_of and safety comments
rust: pin-init: replace clippy `expect` with `allow`
rust: irq: add `'static` bounds to irq callbacks
objtool/rust: add one more `noreturn` Rust function
rust: kbuild: pass `-Zunstable-options` for Rust 1.95.0
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull runtime verifier fix from Steven Rostedt:
- Fix multiple definition of __pcpu_unique_da_mon_this
After refactoring monitors, we used static per-cpu variables with the
same names across different per-cpu monitors. This is explicitly
disallowed for modules on some architectures (alpha) or if
CONFIG_DEBUG_FORCE_WEAK_PER_CPU is enabled (e.g. Fedora's debug
kernel). Make sure all those variables have different names to avoid
compilation issues.
* tag 'trace-rv-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv: Fix multiple definition of __pcpu_unique_da_mon_this
|
|
Conversion performed via this Coccinelle script:
// SPDX-License-Identifier: GPL-2.0-only
// Options: --include-headers-for-types --all-includes --include-headers --keep-comments
virtual patch
@gfp depends on patch && !(file in "tools") && !(file in "samples")@
identifier ALLOC = {kmalloc_obj,kmalloc_objs,kmalloc_flex,
kzalloc_obj,kzalloc_objs,kzalloc_flex,
kvmalloc_obj,kvmalloc_objs,kvmalloc_flex,
kvzalloc_obj,kvzalloc_objs,kvzalloc_flex};
@@
ALLOC(...
- , GFP_KERNEL
)
$ make coccicheck MODE=patch COCCI=gfp.cocci
Build and boot tested x86_64 with Fedora 42's GCC and Clang:
Linux version 6.19.0+ (user@host) (gcc (GCC) 15.2.1 20260123 (Red Hat 15.2.1-7), GNU ld version 2.44-12.fc42) #1 SMP PREEMPT_DYNAMIC 1970-01-01
Linux version 6.19.0+ (user@host) (clang version 20.1.8 (Fedora 20.1.8-4.fc42), LLD 20.1.8) #1 SMP PREEMPT_DYNAMIC 1970-01-01
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Most simple allocations use GFP_KERNEL, and with the new allocation
helpers being introduced, let's just take advantage of that to simplify
that default case.
It's a numbers game:
git grep 'alloc_obj(' |
sed 's/.*\(GFP_[_A-Z]*\).*/\1/' |
sort | uniq -c | sort -n | tail
shows that about 90% of all those new allocator instances just use that
standard GFP_KERNEL.
Those helpers are already macros, and we can easily just make it be the
default case when the gfp argument is missing.
And yes, we could do that for all the legacy interfaces too, but let's
keep it to just the new ones at least for now, since those all got
converted recently anyway, so this is not any "extra" noise outside of
that limited conversion.
And, in fact, I want to do this before doing the -rc1 release, exactly
so that we don't get extra merge conflicts.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 69050f8d6d07 ("treewide: Replace kmalloc with kmalloc_obj for
non-scalar types") started using the new allocation helpers, and in the
process showed that they were completely non-working.
The overflow logic in overflows_flex_counter_type() is completely the
wrong way around, and that broke __alloc_flex() completely. By chance,
the resulting code was then such a mess that clang generated
sufficiently garbage code that objtool warned about it all. Which made
it somewhat quicker to narrow things down.
While fixing overflows_flex_counter_type() would presumably fix this
all, I'm excising the whole broken overflow logic from __alloc_flex(),
because we don't want that kind of code in basic allocation functions
anyway.
That (no longer) broken overflows_flex_counter_type() thing needs to be
inserted into the actual __set_flex_counter() logic in the unlikely case
that we ever want this at all. And made conditional.
Fixes: 81cee9166a90 ("compiler_types: Introduce __flex_counter() and family")
Fixes: 69050f8d6d07 ("treewide: Replace kmalloc with kmalloc_obj for non-scalar types")
Cc: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/all/CAHk-=whEd020BYzGTzYrENjD9Z5_82xx6h8HsQvH5xDSnv0=Hw@mail.gmail.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull kmalloc_obj conversion from Kees Cook:
"This does the tree-wide conversion to kmalloc_obj() and friends using
coccinelle, with a subsequent small manual cleanup of whitespace
alignment that coccinelle does not handle.
This uncovered a clang bug in __builtin_counted_by_ref(), so the
conversion is preceded by disabling that for current versions of
clang. The imminent clang 22.1 release has the fix.
I've done allmodconfig build tests for x86_64, arm64, i386, and arm. I
did defconfig builds for alpha, m68k, mips, parisc, powerpc, riscv,
s390, sparc, sh, arc, csky, xtensa, hexagon, and openrisc"
* tag 'kmalloc_obj-treewide-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
kmalloc_obj: Clean up after treewide replacements
treewide: Replace kmalloc with kmalloc_obj for non-scalar types
compiler_types: Disable __builtin_counted_by_ref for Clang
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Arnaldo Carvalho de Melo:
- Introduce 'perf sched stats' tool with record/report/diff workflows
using schedstat counters
- Add a faster libdw based addr2line implementation and allow selecting
it or its alternatives via 'perf config addr2line.style='
- Data-type profiling fixes and improvements including the ability to
select fields using 'perf report''s -F/-fields, e.g.:
'perf report --fields overhead,type'
- Add 'perf test' regression tests for Data-type profiling with C and
Rust workloads
- Fix srcline printing with inlines in callchains, make sure this has
coverage in 'perf test'
- Fix printing of leaf IP in LBR callchains
- Fix display of metrics without sufficient permission in 'perf stat'
- Print all machines in 'perf kvm report -vvv', not just the host
- Switch from SHA-1 to BLAKE2s for build ID generation, remove SHA-1
code
- Fix 'perf report's histogram entry collapsing with '-F' option
- Use system's cacheline size instead of a hardcoded value in 'perf
report'
- Allow filtering conversion by time range in 'perf data'
- Cover conversion to CTF using 'perf data' in 'perf test'
- Address newer glibc const-correctness (-Werror=discarded-qualifiers)
issues
- Fixes and improvements for ARM's CoreSight support, simplify ARM SPE
event config in 'perf mem', update docs for 'perf c2c' including the
ARM events it can be used with
- Build support for generating metrics from arch specific python
script, add extra AMD, Intel, ARM64 metrics using it
- Add AMD Zen 6 events and metrics
- Add JSON file with OpenHW Risc-V CVA6 hardware counters
- Add 'perf kvm' stats live testing
- Add more 'perf stat' tests to 'perf test'
- Fix segfault in `perf lock contention -b/--use-bpf`
- Fix various 'perf test' cases for s390
- Build system cleanups, bump minimum shellcheck version to 0.7.2
- Support building the capstone based annotation routines as a plugin
- Allow passing extra Clang flags via EXTRA_BPF_FLAGS
* tag 'perf-tools-for-v7.0-1-2026-02-21' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (255 commits)
perf test script: Add python script testing support
perf test script: Add perl script testing support
perf script: Allow the generated script to be a path
perf test: perf data --to-ctf testing
perf test: Test pipe mode with data conversion --to-json
perf json: Pipe mode --to-ctf support
perf json: Pipe mode --to-json support
perf check: Add libbabeltrace to the listed features
perf build: Allow passing extra Clang flags via EXTRA_BPF_FLAGS
perf test data_type_profiling.sh: Skip just the Rust tests if code_with_type workload is missing
tools build: Fix feature test for rust compiler
perf libunwind: Fix calls to thread__e_machine()
perf stat: Add no-affinity flag
perf evlist: Reduce affinity use and move into iterator, fix no affinity
perf evlist: Missing TPEBS close in evlist__close()
perf evlist: Special map propagation for tool events that read on 1 CPU
perf stat-shadow: In prepare_metric fix guard on reading NULL perf_stat_evsel
Revert "perf tool_pmu: More accurately set the cpus for tool events"
tools build: Emit dependencies file for test-rust.bin
tools build: Make test-rust.bin be removed by the 'clean' target
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux
Pull coccinelle updates from Julia Lawall:
"This simplifies and clarifies the handling of output generated by
Coccinelle that is sent to standard error.
By default, this goes to /dev/null. Remind the user of that and
encourage them to provide another file name (Benjamin Philip)"
* tag 'cocci-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
Documentation: Coccinelle: document debug log handling
scripts: coccicheck: warn on unset debug file
scripts: coccicheck: simplify debug file handling
|
|
Pull NTB (PCIe non-transparent bridge) updates from Jon Mason:
"NTB updates include debugfs improvements, correctness fixes, cleanups,
and new hardware support:
ntb_transport QP stats are converted to seq_file, a tx_memcpy_offload
module parameter is introduced with associated ordering fixes, and a
debugfs queue name truncation bug is corrected.
Additional fixes address format specifier mismatches in ntb_tool and
boundary conditions in the Switchtec driver, while unused MSI helpers
are removed and the codebase migrates to dma_map_phys().
Intel Gen6 (Diamond Rapids) NTB support is also added"
* tag 'ntb-7.0' of https://github.com/jonmason/ntb:
NTB: ntb_transport: Use seq_file for QP stats debugfs
NTB: ntb_transport: Fix too small buffer for debugfs_name
ntb/ntb_tool: correct sscanf format for u64 and size_t in tool_peer_mw_trans_write
ntb: intel: Add Intel Gen6 NTB support for DiamondRapids
NTB/msi: Remove unused functions
ntb: ntb_hw_switchtec: Increase MAX_MWS limit to 256
ntb: ntb_hw_switchtec: Fix array-index-out-of-bounds access
ntb: ntb_hw_switchtec: Fix shift-out-of-bounds for 0 mw lut
NTB: epf: allow built-in build
ntb: migrate to dma_map_phys instead of map_page
NTB: ntb_transport: Add 'tx_memcpy_offload' module option
NTB: ntb_transport: Remove unused 'retries' field from ntb_queue_entry
|
