| Age | Commit message (Collapse) | Author |
|---|
|
Oliver reported that x86_pmu_del() ended up doing an out-of-bound memory access
when group_sched_in() fails and needs to roll back.
This *should* be handled by the transaction callbacks, but he found that when
the group leader is a software event, the transaction handlers of the wrong PMU
are used. Despite the move_group case in perf_event_open() and group_sched_in()
using pmu_ctx->pmu.
Turns out, inherit uses event->pmu to clone the events, effectively undoing the
move_group case for all inherited contexts. Fix this by also making inherit use
pmu_ctx->pmu, ensuring all inherited counters end up in the same pmu context.
Similarly, __perf_event_read() should use equally use pmu_ctx->pmu for the
group case.
Fixes: bd2756811766 ("perf: Rewrite core context handling")
Reported-by: Oliver Rosenberg <olrose55@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://patch.msgid.link/20260309133713.GB606826@noisy.programming.kicks-ass.net
|
|
Both Mi Dapeng and Ian Rogers noted that not everything that sets HES_STOPPED
is required to EF_UPDATE. Specifically the 'step 1' loop of rescheduling
explicitly does EF_UPDATE to ensure the counter value is read.
However, then 'step 2' simply leaves the new counter uninitialized when
HES_STOPPED, even though, as noted above, the thing that stopped them might not
be aware it needs to EF_RELOAD -- since it didn't EF_UPDATE on stop.
One such location that is affected is throttling, throttle does pmu->stop(, 0);
and unthrottle does pmu->start(, 0); possibly restarting an uninitialized counter.
Fixes: a4eaf7f14675 ("perf: Rework the PMU methods")
Reported-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Reported-by: Ian Rogers <irogers@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://patch.msgid.link/20260311204035.GX606826@noisy.programming.kicks-ass.net
|
|
A production AMD EPYC system crashed with a NULL pointer dereference
in the PMU NMI handler:
BUG: kernel NULL pointer dereference, address: 0000000000000198
RIP: x86_perf_event_update+0xc/0xa0
Call Trace:
<NMI>
amd_pmu_v2_handle_irq+0x1a6/0x390
perf_event_nmi_handler+0x24/0x40
The faulting instruction is `cmpq $0x0, 0x198(%rdi)` with RDI=0,
corresponding to the `if (unlikely(!hwc->event_base))` check in
x86_perf_event_update() where hwc = &event->hw and event is NULL.
drgn inspection of the vmcore on CPU 106 showed a mismatch between
cpuc->active_mask and cpuc->events[]:
active_mask: 0x1e (bits 1, 2, 3, 4)
events[1]: 0xff1100136cbd4f38 (valid)
events[2]: 0x0 (NULL, but active_mask bit 2 set)
events[3]: 0xff1100076fd2cf38 (valid)
events[4]: 0xff1100079e990a90 (valid)
The event that should occupy events[2] was found in event_list[2]
with hw.idx=2 and hw.state=0x0, confirming x86_pmu_start() had run
(which clears hw.state and sets active_mask) but events[2] was
never populated.
Another event (event_list[0]) had hw.state=0x7 (STOPPED|UPTODATE|ARCH),
showing it was stopped when the PMU rescheduled events, confirming the
throttle-then-reschedule sequence occurred.
The root cause is commit 7e772a93eb61 ("perf/x86: Fix NULL event access
and potential PEBS record loss") which moved the cpuc->events[idx]
assignment out of x86_pmu_start() and into step 2 of x86_pmu_enable(),
after the PERF_HES_ARCH check. This broke any path that calls
pmu->start() without going through x86_pmu_enable() -- specifically
the unthrottle path:
perf_adjust_freq_unthr_events()
-> perf_event_unthrottle_group()
-> perf_event_unthrottle()
-> event->pmu->start(event, 0)
-> x86_pmu_start() // sets active_mask but not events[]
The race sequence is:
1. A group of perf events overflows, triggering group throttle via
perf_event_throttle_group(). All events are stopped: active_mask
bits cleared, events[] preserved (x86_pmu_stop no longer clears
events[] after commit 7e772a93eb61).
2. While still throttled (PERF_HES_STOPPED), x86_pmu_enable() runs
due to other scheduling activity. Stopped events that need to
move counters get PERF_HES_ARCH set and events[old_idx] cleared.
In step 2 of x86_pmu_enable(), PERF_HES_ARCH causes these events
to be skipped -- events[new_idx] is never set.
3. The timer tick unthrottles the group via pmu->start(). Since
commit 7e772a93eb61 removed the events[] assignment from
x86_pmu_start(), active_mask[new_idx] is set but events[new_idx]
remains NULL.
4. A PMC overflow NMI fires. The handler iterates active counters,
finds active_mask[2] set, reads events[2] which is NULL, and
crashes dereferencing it.
Move the cpuc->events[hwc->idx] assignment in x86_pmu_enable() to
before the PERF_HES_ARCH check, so that events[] is populated even
for events that are not immediately started. This ensures the
unthrottle path via pmu->start() always finds a valid event pointer.
Fixes: 7e772a93eb61 ("perf/x86: Fix NULL event access and potential PEBS record loss")
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260310-perf-v2-1-4a3156fce43c@debian.org
|
|
with sparse
There are two versions of the __this_cpu_local_lock() definitions in
include/linux/local_lock_internal.h: one version that relies on the
Clang overloading functionality and another version that does not.
Select the latter version when using sparse. This patch fixes the
following errors reported by sparse:
include/linux/local_lock_internal.h:331:40: sparse: sparse: multiple definitions for function '__this_cpu_local_lock'
include/linux/local_lock_internal.h:325:37: sparse: the previous one is here
Closes: https://lore.kernel.org/oe-kbuild-all/202603062334.wgI5htP0-lkp@intel.com/
Fixes: d3febf16dee2 ("locking/local_lock: Support Clang's context analysis")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Marco Elver <elver@google.com>
Link: https://patch.msgid.link/20260311231455.1961413-1-bvanassche@acm.org
|
|
The kernel fmt! proc macro wraps each format argument as &(arg). Passing a
tuple such as (a, b) produces &((a, b)) after expansion. Clippy flags that
as double_parens, but it is a false positive fixed in Clippy 1.92 [1] [2].
Suppress the warning on the affected doctest function with a reason
attribute so it can be removed once the minimum toolchain moves past 1.92.
[ We may end up deciding to support per-version Clippy lints, in which
case we will need [3].
In the future, if [4] gets fixed, we may be able to use
`Delimiter::None` as Gary suggested in [5].
Link: https://lore.kernel.org/rust-for-linux/20260307170929.153892-1-ojeda@kernel.org/ [3]
Link: https://github.com/rust-lang/rust/issues/67062 [4]
Link: https://lore.kernel.org/rust-for-linux/DGUA5GY2DGYN.3PG0FKLG7GFN1@garyguo.net/ [5]
- Miguel ]
Link: https://github.com/rust-lang/rust-clippy/issues/15852 [1]
Link: https://github.com/rust-lang/rust-clippy/pull/15939 [2]
Suggested-by: Gary Guo <gary@garyguo.net>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/20260312041934.362840-2-jhubbard@nvidia.com
[ Reworded to replace GitHub-like short link with full URLs in Link tags.
Reworded reason string to match the style of a couple others we have
elsewhere. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
We use a unit struct `__InitOk` in the closure generated by the
initializer macros as the return value. We shadow it by creating a
struct with the same name again inside of the closure, preventing early
returns of `Ok` in the initializer (before all fields have been
initialized).
In the face of Type Alias Impl Trait (TAIT) and the next trait solver,
this solution no longer works [1]. The shadowed struct can be named
through type inference. In addition, there is an RFC proposing to add
the feature of path inference to Rust, which would similarly allow [2].
Thus remove the shadowed token and replace it with an `unsafe` to create
token.
The reason we initially used the shadowing solution was because an
alternative solution used a builder pattern. Gary writes [3]:
In the early builder-pattern based InitOk, having a single InitOk
type for token is unsound because one can launder an InitOk token
used for one place to another initializer. I used a branded lifetime
solution, and then you figured out that using a shadowed type would
work better because nobody could construct it at all.
The laundering issue does not apply to the approach we ended up with
today.
With this change, the example by Tim Chirananthavat in [1] no longer
compiles and results in this error:
error: cannot construct `pin_init::__internal::InitOk` with struct literal syntax due to private fields
--> src/main.rs:26:17
|
26 | InferredType {}
| ^^^^^^^^^^^^
|
= note: private field `0` that was not provided
help: you might have meant to use the `new` associated function
|
26 - InferredType {}
26 + InferredType::new()
|
Applying the suggestion of using the `::new()` function, results in
another expected error:
error[E0133]: call to unsafe function `pin_init::__internal::InitOk::new` is unsafe and requires unsafe block
--> src/main.rs:26:17
|
26 | InferredType::new()
| ^^^^^^^^^^^^^^^^^^^ call to unsafe function
|
= note: consult the function's documentation for information on how to avoid undefined behavior
Reported-by: Tim Chirananthavat <theemathas@gmail.com>
Link: https://github.com/rust-lang/rust/issues/153535 [1]
Link: https://github.com/rust-lang/rfcs/pull/3444#issuecomment-4016145373 [2]
Link: https://github.com/rust-lang/rust/issues/153535#issuecomment-4017620804 [3]
Fixes: fc6c6baa1f40 ("rust: init: add initialization macros")
Cc: stable@vger.kernel.org
Signed-off-by: Benno Lossin <lossin@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260311105056.1425041-1-lossin@kernel.org
[ Added period as mentioned. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
net->xfrm.nlsk is used in 2 types of contexts:
- fully under RCU, with rcu_read_lock + rcu_dereference and a NULL check
- in the netlink handlers, with requests coming from a userspace socket
In the 2nd case, net->xfrm.nlsk is guaranteed to stay non-NULL and the
object is alive, since we can't enter the netns destruction path while
the user socket holds a reference on the netns.
After adding the __rcu annotation to netns_xfrm.nlsk (which silences
sparse warnings in the RCU users and __net_init code), we need to tell
sparse that the 2nd case is safe. Add a helper for that.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
xfrm_input_afinfo is __rcu, we should use rcu_access_pointer to avoid
a sparse warning:
net/xfrm/xfrm_input.c:78:21: error: incompatible types in comparison expression (different address spaces):
net/xfrm/xfrm_input.c:78:21: struct xfrm_input_afinfo const [noderef] __rcu *
net/xfrm/xfrm_input.c:78:21: struct xfrm_input_afinfo const *
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
xfrm_policy_afinfo is __rcu, use rcu_access_pointer to silence:
net/xfrm/xfrm_policy.c:4152:43: error: incompatible types in comparison expression (different address spaces):
net/xfrm/xfrm_policy.c:4152:43: struct xfrm_policy_afinfo const [noderef] __rcu *
net/xfrm/xfrm_policy.c:4152:43: struct xfrm_policy_afinfo const *
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
In xfrm_policy_init:
add rcu_assign_pointer to fix warning:
net/xfrm/xfrm_policy.c:4238:29: warning: incorrect type in assignment (different address spaces)
net/xfrm/xfrm_policy.c:4238:29: expected struct hlist_head [noderef] __rcu *table
net/xfrm/xfrm_policy.c:4238:29: got struct hlist_head *
add rcu_dereference_protected to silence warning:
net/xfrm/xfrm_policy.c:4265:36: warning: incorrect type in argument 1 (different address spaces)
net/xfrm/xfrm_policy.c:4265:36: expected struct hlist_head *n
net/xfrm/xfrm_policy.c:4265:36: got struct hlist_head [noderef] __rcu *table
The netns is being created, no concurrent access is possible yet.
In xfrm_policy_fini, net is going away, there shouldn't be any
concurrent changes to the hashtables, so we can use
rcu_dereference_protected to silence warnings:
net/xfrm/xfrm_policy.c:4291:17: warning: incorrect type in argument 1 (different address spaces)
net/xfrm/xfrm_policy.c:4291:17: expected struct hlist_head const *h
net/xfrm/xfrm_policy.c:4291:17: got struct hlist_head [noderef] __rcu *table
net/xfrm/xfrm_policy.c:4292:36: warning: incorrect type in argument 1 (different address spaces)
net/xfrm/xfrm_policy.c:4292:36: expected struct hlist_head *n
net/xfrm/xfrm_policy.c:4292:36: got struct hlist_head [noderef] __rcu *table
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Silence sparse warnings in xfrm_state_fini:
net/xfrm/xfrm_state.c:3327:9: warning: incorrect type in argument 1 (different address spaces)
net/xfrm/xfrm_state.c:3327:9: expected struct hlist_head const *h
net/xfrm/xfrm_state.c:3327:9: got struct hlist_head [noderef] __rcu *state_byseq
Add xfrm_state_deref_netexit() to wrap those calls. The netns is going
away, we don't have to worry about the state_by* pointers being
changed behind our backs.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
xfrm_state_lookup_spi_proto is called under xfrm_state_lock by
xfrm_alloc_spi, no need to take a reference on the state and pretend
to be under RCU.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
We're under xfrm_state_lock for all those walks, we can use
xfrm_state_deref_prot to silence sparse warnings such as:
net/xfrm/xfrm_state.c:933:17: warning: dereference of noderef expression
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
We're under xfrm_state_lock in all those cases, use
xfrm_state_deref_prot(state_by*) to avoid sparse warnings:
net/xfrm/xfrm_state.c:2597:25: warning: cast removes address space '__rcu' of expression
net/xfrm/xfrm_state.c:2597:25: warning: incorrect type in argument 2 (different address spaces)
net/xfrm/xfrm_state.c:2597:25: expected struct hlist_head *h
net/xfrm/xfrm_state.c:2597:25: got struct hlist_head [noderef] __rcu *
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Use rcu_assign_pointer, and tmp variables for freeing on the error
path without accessing net->xfrm.state_by*.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
In all callers, x is not an __rcu pointer. We can drop the annotation to
avoid sparse warnings:
net/xfrm/xfrm_state.c:58:39: warning: incorrect type in argument 1 (different address spaces)
net/xfrm/xfrm_state.c:58:39: expected struct refcount_struct [usertype] *r
net/xfrm/xfrm_state.c:58:39: got struct refcount_struct [noderef] __rcu *
net/xfrm/xfrm_state.c:1166:42: warning: incorrect type in argument 1 (different address spaces)
net/xfrm/xfrm_state.c:1166:42: expected struct xfrm_state [noderef] __rcu *x
net/xfrm/xfrm_state.c:1166:42: got struct xfrm_state *[assigned] x
(repeated for each caller)
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
__copy_tofrom_user_power7_vmx
The new PowerPC VMX fast path (__copy_tofrom_user_power7_vmx) is not
exercised by existing copyloops selftests. This patch updates
the selftest to exercise the VMX variant, ensuring the VMX copy path
is validated.
Changes include:
- COPY_LOOP=test___copy_tofrom_user_power7_vmx with -D VMX_TEST is used
in existing selftest build targets.
- Inclusion of ../utils.c to provide get_auxv_entry() for hardware
feature detection.
- At runtime, the test skips execution if Altivec is not available.
- Copy sizes above VMX_COPY_THRESHOLD are used to ensure the VMX
path is taken.
This enables validation of the VMX fast path without affecting systems
that do not support Altivec.
Signed-off-by: Sayali Patil <sayalip@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260304122201.153049-2-sayalip@linux.ibm.com
|
|
On powerpc with PREEMPT_FULL or PREEMPT_LAZY and function tracing enabled,
KUAP warnings can be triggered from the VMX usercopy path under memory
stress workloads.
KUAP requires that no subfunctions are called once userspace access has
been enabled. The existing VMX copy implementation violates this
requirement by invoking enter_vmx_usercopy() from the assembly path after
userspace access has already been enabled. If preemption occurs
in this window, the AMR state may not be preserved correctly,
leading to unexpected userspace access state and resulting in
KUAP warnings.
Fix this by restructuring the VMX usercopy flow so that VMX selection
and VMX state management are centralized in raw_copy_tofrom_user(),
which is invoked by the raw_copy_{to,from,in}_user() wrappers.
The new flow is:
- raw_copy_{to,from,in}_user() calls raw_copy_tofrom_user()
- raw_copy_tofrom_user() decides whether to use the VMX path
based on size and CPU capability
- Call enter_vmx_usercopy() before enabling userspace access
- Enable userspace access as per the copy direction
and perform the VMX copy
- Disable userspace access as per the copy direction
- Call exit_vmx_usercopy()
- Fall back to the base copy routine if the VMX copy faults
With this change, the VMX assembly routines no longer perform VMX state
management or call helper functions; they only implement the
copy operations.
The previous feature-section based VMX selection inside
__copy_tofrom_user_power7() is removed, and a dedicated
__copy_tofrom_user_power7_vmx() entry point is introduced.
This ensures correct KUAP ordering, avoids subfunction calls
while KUAP is unlocked, and eliminates the warnings while preserving
the VMX fast path.
Fixes: de78a9c42a79 ("powerpc: Add a framework for Kernel Userspace Access Protection")
Reported-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Closes: https://lore.kernel.org/all/20260109064917.777587-2-sshegde@linux.ibm.com/
Suggested-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Co-developed-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Signed-off-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Signed-off-by: Sayali Patil <sayalip@linux.ibm.com>
Tested-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260304122201.153049-1-sayalip@linux.ibm.com
|
|
It may happen that mm is already released, which leads to kernel panic.
This adds the NULL check for current->mm, similarly to
commit 20afc60f892d ("x86, perf: Check that current->mm is alive before getting user callchain").
I was getting this panic when running a profiling BPF program
(profile.py from bcc-tools):
[26215.051935] Kernel attempted to read user page (588) - exploit attempt? (uid: 0)
[26215.051950] BUG: Kernel NULL pointer dereference on read at 0x00000588
[26215.051952] Faulting instruction address: 0xc00000000020fac0
[26215.051957] Oops: Kernel access of bad area, sig: 11 [#1]
[...]
[26215.052049] Call Trace:
[26215.052050] [c000000061da6d30] [c00000000020fc10] perf_callchain_user_64+0x2d0/0x490 (unreliable)
[26215.052054] [c000000061da6dc0] [c00000000020f92c] perf_callchain_user+0x1c/0x30
[26215.052057] [c000000061da6de0] [c0000000005ab2a0] get_perf_callchain+0x100/0x360
[26215.052063] [c000000061da6e70] [c000000000573bc8] bpf_get_stackid+0x88/0xf0
[26215.052067] [c000000061da6ea0] [c008000000042258] bpf_prog_16d4ab9ab662f669_do_perf_event+0xf8/0x274
[...]
In addition, move storing the top-level stack entry to generic
perf_callchain_user to make sure the top-evel entry is always captured,
even if current->mm is NULL.
Fixes: 20002ded4d93 ("perf_counter: powerpc: Add callchain support")
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Tested-by: Qiao Zhao <qzhao@redhat.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Reviewed-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
[Maddy: fixed message to avoid checkpatch format style error]
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260309144045.169427-1-vmalik@redhat.com
|
|
commit 4267739cabb8 ("arch, mm: consolidate initialization of SPARSE memory model"),
changed the initialization order of "pageblock_order" from...
start_kernel()
- setup_arch()
- initmem_init()
- sparse_init()
- set_pageblock_order(); // this sets the pageblock_order
- xxx_cma_reserve();
to...
start_kernel()
- setup_arch()
- xxx_cma_reserve();
- mm_core_init_early()
- free_area_init()
- sparse_init()
- set_pageblock_order() // this sets the pageblock_order.
So this means, pageblock_order is not initialized before these cma
reservation function calls, hence we are seeing CMA failures like...
[ 0.000000] kvm_cma_reserve: reserving 3276 MiB for global area
[ 0.000000] cma: pageblock_order not yet initialized. Called during early boot?
[ 0.000000] cma: Failed to reserve 3276 MiB
....
[ 0.000000][ T0] cma: pageblock_order not yet initialized. Called during early boot?
[ 0.000000][ T0] cma: Failed to reserve 1024 MiB
This patch moves these CMA reservations to arch_mm_preinit() which
happens in mm_core_init() (which happens after pageblock_order is
initialized), but before the memblock moves the free memory to buddy.
Fixes: 4267739cabb8 ("arch, mm: consolidate initialization of SPARSE memory model")
Suggested-by: Mike Rapoport <rppt@kernel.org>
Reported-and-tested-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Closes: https://lore.kernel.org/linuxppc-dev/4c338a29-d190-44f3-8874-6cfa0a031f0b@linux.ibm.com/
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Tested-by: Dan Horák <dan@danny.cz>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/6e532cf0db5be99afbe20eed699163d5e86cd71f.1772303986.git.ritesh.list@gmail.com
|
|
https://gitlab.freedesktop.org/drm/msm into drm-fixes
Fixes for v7.0:
Core:
- Adjusted msm_iommu_pagetable_prealloc_allocate() allocation type
DPU:
- Fixed blue screens on Hamoa laptops by reverting the LM reservation
- Fixed the size of the LM block on several platforms
- Dropped usage of %pK (again)
- Fixed smatch warning on SSPP v13+ code
- Fixed INTF_6 interrupts on Lemans
DSI:
- Fixed DSI PHY revision on Kaanapali
- Fixed pixel clock calculation for the bonded DSI mode panels with
compression enabled
DT bindings:
- Fixed DisplayPort description on Glymur
- Fixed model name in SM8750 MDSS schema
GPU:
- Added MODULE_DEVICE_TABLE to the GPU driver
- Fix bogus protect error on X2-85
- Fix dma_free_attrs() buffer size
- Gen8 UBWC fix for Glymur
From: Rob Clark <rob.clark@oss.qualcomm.com>
Link: https://patch.msgid.link/CACSVV00wZ95gFDLfzJ0Ywb8rsjPSjZ1aHdwE4smnyuZ=Fg-g8Q@mail.gmail.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
For unstated reasons, function mshv_partition_ioctl_set_memory passes
struct mshv_user_mem_region by value instead of by reference. Change
it to pass by reference.
Signed-off-by: Mukesh R <mrathor@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
hv_hvcrash_ctxt_save() in arch/x86/hyperv/hv_crash.c currently saves %cr2
and %cr8 using %eax ("=a"). This unnecessarily forces a specific register.
Update the inline assembly to use a general-purpose register ("=r") for
both %cr2 and %cr8. This makes the code more flexible for the compiler
while producing the same saved context contents.
No functional changes.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Long Li <longli@microsoft.com>
Cc: Thomas Gleixner <tglx@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Use current_stack_pointer to avoid asm() when saving %rsp to the
crash context memory in hv_hvcrash_ctxt_save(). The new code is
more readable and results in exactly the same object file.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Long Li <longli@microsoft.com>
Cc: Thomas Gleixner <tglx@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
hv_hvcrash_ctxt_save() in arch/x86/hyperv/hv_crash.c currently saves
segment registers via a general-purpose register (%eax). Update the
code to save segment registers (cs, ss, ds, es, fs, gs) directly to
the crash context memory using movw. This avoids unnecessary use of
a general-purpose register, making the code simpler and more efficient.
The size of the corresponding object file improves as follows:
text data bss dec hex filename
4167 176 200 4543 11bf hv_crash-old.o
4151 176 200 4527 11af hv_crash-new.o
No functional change occurs to the saved context contents; this is
purely a code-quality improvement.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Long Li <longli@microsoft.com>
Cc: Thomas Gleixner <tglx@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
The NIX RAS health report path uses nix_af_rvu_err when handling the
NIX_AF_RVU_RAS case, so the report prints the ERR interrupt status rather
than the RAS interrupt status.
Use nix_af_rvu_ras for the NIX_AF_RVU_RAS report.
Fixes: 5ed66306eab6 ("octeontx2-af: Add devlink health reporters for NIX")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/20260310184824.1183651-2-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The NIX RAS health reporter recovery routine checks nix_af_rvu_int to
decide whether to re-enable NIX_AF_RAS interrupts. This is the RVU
interrupt status field and is unrelated to RAS events, so the recovery
flow may incorrectly skip re-enabling NIX_AF_RAS interrupts.
Check nix_af_rvu_ras instead before writing NIX_AF_RAS_ENA_W1S.
Fixes: 5ed66306eab6 ("octeontx2-af: Add devlink health reporters for NIX")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/20260310184824.1183651-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The "rx_filter" member of "hwtstamp_config" structure is an enum field and
does not support bitwise OR combination of multiple filter values. It
causes error while linuxptp application tries to match rx filter version.
Fix this by storing the requested filter type in a new port field.
Fixes: 97248adb5a3b ("net: ti: am65-cpsw: Update hw timestamping filter for PTPv1 RX packets")
Signed-off-by: Chintan Vankar <c-vankar@ti.com>
Link: https://patch.msgid.link/20260310160940.109822-1-c-vankar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In mana_gd_setup() error path, set gc->service_wq to NULL after
destroy_workqueue() to match the cleanup in mana_gd_cleanup().
This prevents a use-after-free if the workqueue pointer is checked
after a failed setup.
Fixes: f975a0955276 ("net: mana: Fix double destroy_workqueue on service rescan PCI path")
Signed-off-by: Shiraz Saleem <shirazsaleem@microsoft.com>
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260309172443.688392-1-kotaranov@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter: updates for net
Due to large volume of backlogged patches its unlikely I will make the
2nd planned PR this week, so several legit fixes will be pushed back
to next week. Sorry for the inconvenience but I am out of ideas and
alternatives.
1) syzbot managed to add/remove devices to a flowtable, due to a bug in
the flowtable netdevice notifier this gets us a double-add and
eventually UaF when device is removed again (we only expect one
entry, duplicate remains past net_device end-of-life).
From Phil Sutter, bug added in 6.16.
2) Yiming Qian reports another nf_tables transaction handling bug:
in some cases error unwind misses to undo certain set elements,
resulting in refcount underflow and use-after-free, bug added in 6.4.
3) Jenny Guanni Qu found out-of-bounds read in pipapo set type.
While the value is never used, it still rightfully triggers KASAN
splats. Bug exists since this set type was added in 5.6.
4) a few x_tables modules contain copypastry tcp option parsing code which
can read 1 byte past the option area. This bug is ancient, fix from
David Dull.
5) nfnetlink_queue leaks kernel memory if userspace provides bad
NFQA_VLAN/NFQA_L2HDR attributes. From Hyunwoo Kim, bug stems from
from 4.7 days.
6) nfnetlink_cthelper has incorrect loop restart logic which may result
in reading one pointer past end of array. From 3.6 days, fix also from
Hyunwoo Kim.
7) xt_IDLETIMER v0 extension must reject working with timers added
by revision v1, else we get list corruption. Bug added in v5.7.
From Yifan Wu, Juefei Pu and Yuan Tan via Xin Lu.
* tag 'nf-26-03-10' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: xt_IDLETIMER: reject rev0 reuse of ALARM timer labels
netfilter: nfnetlink_cthelper: fix OOB read in nfnl_cthelper_dump_table()
netfilter: nfnetlink_queue: fix entry leak in bridge verdict error path
netfilter: x_tables: guard option walkers against 1-byte tail reads
netfilter: nft_set_pipapo: fix stack out-of-bounds read in pipapo_drop()
netfilter: nf_tables: always walk all pending catchall elements
netfilter: nf_tables: Fix for duplicate device in netdev hooks
====================
Link: https://patch.msgid.link/20260310132050.630-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2026-03-10 (ice, iavf, i40e, e1000e, e1000)
Nikolay Aleksandrov changes return code of RDMA related ice devlink get
parameters when irdma is not enabled to -EOPNOTSUPP as current return
of -ENODEV causes issues with devlink output.
Petr Oros resolves a couple of issues in iavf; freeing PTP resources
before reset and disable. Fixing contention issues with the netdev lock
between reset and some ethtool operations.
Alok Tiwari corrects an incorrect comparison of cloud filter values and
adjust some passed arguments to sizeof() for consistency on i40e.
Matt Vollrath removes an incorrect decrement for DMA error on e1000 and
e1000e drivers.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
e1000/e1000e: Fix leak in DMA error cleanup
i40e: fix src IP mask checks and memcpy argument names in cloud filter
iavf: fix incorrect reset handling in callbacks
iavf: fix PTP use-after-free during reset
drivers: net: ice: fix devlink parameters get without irdma
====================
Link: https://patch.msgid.link/20260310205654.4109072-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Sabrina Dubroca says:
====================
neighbour: fix update of proxy neighbour
While re-reading some "old" patches I ran into a small change of
behavior in commit dc2a27e524ac ("neighbour: Update pneigh_entry in
pneigh_create().").
The old behavior was not consistent between ->protocol and ->flags,
and didn't offer a way to clear protocol, so maybe it's better to
change that (7-years-old [1]) behavior. But then we should change
non-proxy neighbours as well to keep neigh/pneigh consistent.
[1] df9b0e30d44c ("neighbor: Add protocol attribute")
====================
Link: https://patch.msgid.link/cover.1772894876.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Check that protocol and flags are updated correctly for
neighbour and pneigh entries.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/d28f72b5b4ff4c9ecbbbde06146a938dcc4c264a.1772894876.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Prior to commit dc2a27e524ac ("neighbour: Update pneigh_entry in
pneigh_create()."), a pneigh's protocol was updated only when the
value of the NDA_PROTOCOL attribute was non-0. While moving the code,
that check was removed. This is a small change of user-visible
behavior, and inconsistent with the (non-proxy) neighbour behavior.
Fixes: dc2a27e524ac ("neighbour: Update pneigh_entry in pneigh_create().")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/38c61de1bb032871a886aff9b9b52fe1cdd4cada.1772894876.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The rtl8366rb_led_group_port_mask() function always returns LED port
bit in LED group 0; the switch statement returns the same thing in all
non-default cases.
This means that the driver does not currently support configuring LEDs
in non-zero LED groups.
Fix this.
Fixes: 32d617005475a71e ("net: dsa: realtek: add LED drivers for rtl8366rb")
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260311111237.29002-1-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A user can set conn_timeout to any value via
setsockopt(TIPC_CONN_TIMEOUT), including values less than 4. When a
SYN is rejected with TIPC_ERR_OVERLOAD and the retry path in
tipc_sk_filter_connect() executes:
delay %= (tsk->conn_timeout / 4);
If conn_timeout is in the range [0, 3], the integer division yields 0,
and the modulo operation triggers a divide-by-zero exception, causing a
kernel oops/panic.
Fix this by clamping conn_timeout to a minimum of 4 at the point of use
in tipc_sk_filter_connect().
Oops: divide error: 0000 [#1] SMP KASAN NOPTI
CPU: 0 UID: 0 PID: 119 Comm: poc-F144 Not tainted 7.0.0-rc2+
RIP: 0010:tipc_sk_filter_rcv (net/tipc/socket.c:2236 net/tipc/socket.c:2362)
Call Trace:
tipc_sk_backlog_rcv (include/linux/instrumented.h:82 include/linux/atomic/atomic-instrumented.h:32 include/net/sock.h:2357 net/tipc/socket.c:2406)
__release_sock (include/net/sock.h:1185 net/core/sock.c:3213)
release_sock (net/core/sock.c:3797)
tipc_connect (net/tipc/socket.c:2570)
__sys_connect (include/linux/file.h:62 include/linux/file.h:83 net/socket.c:2098)
Fixes: 6787927475e5 ("tipc: buffer overflow handling in listener socket")
Cc: stable@vger.kernel.org
Signed-off-by: Mehul Rao <mehulrao@gmail.com>
Reviewed-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Link: https://patch.msgid.link/20260310170730.28841-1-mehulrao@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If request_threaded_irq() fails during the PTP message IRQ setup, the
newly created IRQ mapping is never disposed. Indeed, the
ksz_ptp_irq_setup()'s error path only frees the mappings that were
successfully set up.
Dispose the newly created mapping if the associated
request_threaded_irq() fails at setup.
Cc: stable@vger.kernel.org
Fixes: d0b8fec8ae505 ("net: dsa: microchip: Fix symetry in ksz_ptp_msg_irq_{setup/free}()")
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20260309-ksz-ptp-irq-fix-v1-1-757b3b985955@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ricardo B. Marlière says:
====================
{net,bpf}: nd_tbl fixes for when ipv6.disable=1
Please consider merging these four patches to fix three crashes that were
found after this report:
https://lore.kernel.org/all/CAHXs0ORzd62QOG-Fttqa2Cx_A_VFp=utE2H2VTX5nqfgs7LDxQ@mail.gmail.com
The first patch from Jakub Kicinski is a preparation in order to enable
the use ipv6_mod_enabled() even when CONFIG_IPV6=n.
====================
Link: https://patch.msgid.link/20260307-net-nd_tbl_fixes-v4-0-e2677e85628c@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When booting with the 'ipv6.disable=1' parameter, the nd_tbl is never
initialized because inet6_init() exits before ndisc_init() is called which
initializes it. If bpf_redirect_neigh() is called with explicit AF_INET6
nexthop parameters, __bpf_redirect_neigh_v6() can skip the IPv6 FIB lookup
and call bpf_out_neigh_v6() directly. bpf_out_neigh_v6() then calls
ip_neigh_gw6(), which uses ipv6_stub->nd_tbl.
BUG: kernel NULL pointer dereference, address: 0000000000000248
Oops: Oops: 0000 [#1] SMP NOPTI
RIP: 0010:skb_do_redirect+0x44f/0xf40
Call Trace:
<TASK>
? srso_alias_return_thunk+0x5/0xfbef5
? __tcf_classify.constprop.0+0x83/0x160
? srso_alias_return_thunk+0x5/0xfbef5
? tcf_classify+0x2b/0x50
? srso_alias_return_thunk+0x5/0xfbef5
? tc_run+0xb8/0x120
? srso_alias_return_thunk+0x5/0xfbef5
__dev_queue_xmit+0x6fa/0x1000
? srso_alias_return_thunk+0x5/0xfbef5
packet_sendmsg+0x10da/0x1700
? srso_alias_return_thunk+0x5/0xfbef5
__sys_sendto+0x1f3/0x220
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x101/0xf80
? exc_page_fault+0x6e/0x170
? srso_alias_return_thunk+0x5/0xfbef5
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Fix this by adding an early check in bpf_out_neigh_v6(). If IPv6 is
disabled, drop the packet before neighbor lookup.
Suggested-by: Fernando Fernandez Mancera <fmancera@suse.de>
Fixes: ba452c9e996d ("bpf: Fix bpf_redirect_neigh helper api to support supplying nexthop")
Signed-off-by: Ricardo B. Marlière <rbm@suse.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/20260307-net-nd_tbl_fixes-v4-4-e2677e85628c@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When booting with the 'ipv6.disable=1' parameter, the nd_tbl is never
initialized because inet6_init() exits before ndisc_init() is called which
initializes it. If bpf_redirect_neigh() is called from tc with an explicit
nexthop of nh_family == AF_INET6, bpf_out_neigh_v4() takes the AF_INET6
branch and calls ip_neigh_gw6(), which relies on ipv6_stub->nd_tbl.
BUG: kernel NULL pointer dereference, address: 0000000000000248
Oops: Oops: 0000 [#1] SMP NOPTI
RIP: 0010:skb_do_redirect+0xb93/0xf00
Call Trace:
<TASK>
? srso_alias_return_thunk+0x5/0xfbef5
? __tcf_classify.constprop.0+0x83/0x160
? srso_alias_return_thunk+0x5/0xfbef5
? tcf_classify+0x2b/0x50
? srso_alias_return_thunk+0x5/0xfbef5
? tc_run+0xb8/0x120
? srso_alias_return_thunk+0x5/0xfbef5
__dev_queue_xmit+0x6fa/0x1000
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? alloc_skb_with_frags+0x58/0x200
packet_sendmsg+0x10da/0x1700
? srso_alias_return_thunk+0x5/0xfbef5
__sys_sendto+0x1f3/0x220
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x101/0xf80
? exc_page_fault+0x6e/0x170
? srso_alias_return_thunk+0x5/0xfbef5
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Fix this by adding an early check in the AF_INET6 branch of
bpf_out_neigh_v4(). If IPv6 is disabled, unlock RCU and drop the packet.
Suggested-by: Fernando Fernandez Mancera <fmancera@suse.de>
Fixes: ba452c9e996d ("bpf: Fix bpf_redirect_neigh helper api to support supplying nexthop")
Signed-off-by: Ricardo B. Marlière <rbm@suse.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/20260307-net-nd_tbl_fixes-v4-3-e2677e85628c@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When booting with the 'ipv6.disable=1' parameter, the nd_tbl is never
initialized because inet6_init() exits before ndisc_init() is called
which initializes it. If bonding ARP/NS validation is enabled, an IPv6
NS/NA packet received on a slave can reach bond_validate_na(), which
calls bond_has_this_ip6(). That path calls ipv6_chk_addr() and can
crash in __ipv6_chk_addr_and_flags().
BUG: kernel NULL pointer dereference, address: 00000000000005d8
Oops: Oops: 0000 [#1] SMP NOPTI
RIP: 0010:__ipv6_chk_addr_and_flags+0x69/0x170
Call Trace:
<IRQ>
ipv6_chk_addr+0x1f/0x30
bond_validate_na+0x12e/0x1d0 [bonding]
? __pfx_bond_handle_frame+0x10/0x10 [bonding]
bond_rcv_validate+0x1a0/0x450 [bonding]
bond_handle_frame+0x5e/0x290 [bonding]
? srso_alias_return_thunk+0x5/0xfbef5
__netif_receive_skb_core.constprop.0+0x3e8/0xe50
? srso_alias_return_thunk+0x5/0xfbef5
? update_cfs_rq_load_avg+0x1a/0x240
? srso_alias_return_thunk+0x5/0xfbef5
? __enqueue_entity+0x5e/0x240
__netif_receive_skb_one_core+0x39/0xa0
process_backlog+0x9c/0x150
__napi_poll+0x30/0x200
? srso_alias_return_thunk+0x5/0xfbef5
net_rx_action+0x338/0x3b0
handle_softirqs+0xc9/0x2a0
do_softirq+0x42/0x60
</IRQ>
<TASK>
__local_bh_enable_ip+0x62/0x70
__dev_queue_xmit+0x2d3/0x1000
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? packet_parse_headers+0x10a/0x1a0
packet_sendmsg+0x10da/0x1700
? kick_pool+0x5f/0x140
? srso_alias_return_thunk+0x5/0xfbef5
? __queue_work+0x12d/0x4f0
__sys_sendto+0x1f3/0x220
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x101/0xf80
? exc_page_fault+0x6e/0x170
? srso_alias_return_thunk+0x5/0xfbef5
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Fix this by checking ipv6_mod_enabled() before dispatching IPv6 packets to
bond_na_rcv(). If IPv6 is disabled, return early from bond_rcv_validate()
and avoid the path to ipv6_chk_addr().
Suggested-by: Fernando Fernandez Mancera <fmancera@suse.de>
Fixes: 4e24be018eb9 ("bonding: add new parameter ns_targets")
Signed-off-by: Ricardo B. Marlière <rbm@suse.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20260307-net-nd_tbl_fixes-v4-2-e2677e85628c@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
From: Jakub Kicinski <kuba@kernel.org>
Make sure disable_ipv6_mod itself is not part of the IPv6 module,
in case core code wants to refer to it. We will remove support
for IPv6=m soon, this change helps make fixes we commit before
that less messy.
Link: https://patch.msgid.link/20260307-net-nd_tbl_fixes-v4-1-e2677e85628c@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When retrans mount option was introduced, the default value was set
as 1. However, in the light of some bugs that this has exposed recently
we should change it to 0 and retain the old behaviour before this option
was introduced.
Cc: <stable@vger.kernel.org>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When looking up open handles to be re-used in cifs_open(), calling
cifs_get_{writable,readable}_path() is wrong as it will look up for
the first matching open handle, and if @file->f_flags doesn't match,
it will ignore the remaining open handles in
cifsInodeInfo::openFileList that might potentially match
@file->f_flags.
For writable and readable handles, fix this by calling
__cifs_get_writable_file() and __find_readable_file(), respectively,
with FIND_OPEN_FLAGS set.
With the patch, the following program ends up with two opens instead
of three sent over the wire.
```
#define _GNU_SOURCE
#include <unistd.h>
#include <string.h>
#include <fcntl.h>
int main(int argc, char *argv[])
{
int fd;
fd = open("/mnt/1/foo", O_CREAT | O_WRONLY | O_TRUNC, 0664);
close(fd);
fd = open("/mnt/1/foo", O_DIRECT | O_WRONLY);
close(fd);
fd = open("/mnt/1/foo", O_WRONLY);
close(fd);
fd = open("/mnt/1/foo", O_DIRECT | O_WRONLY);
close(fd);
return 0;
}
```
```
$ mount.cifs //srv/share /mnt/1 -o ...
$ gcc test.c && ./a.out
```
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Cc: David Howells <dhowells@redhat.com>
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
parse_server_interfaces() initializes interface socket addresses with
CIFS_PORT. When the mount uses a non-default port this overwrites the
configured destination port.
Later, cifs_chan_update_iface() copies this sockaddr into server->dstaddr,
causing reconnect attempts to use the wrong port after server interface
updates.
Use the existing port from server->dstaddr instead.
Cc: stable@vger.kernel.org
Fixes: fe856be475f7 ("CIFS: parse and store info on iface queries")
Tested-by: Dr. Thomas Orgis <thomas.orgis@uni-hamburg.de>
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The DesignWare I3C master controller ACKs IBIs as soon as a valid
Device Address Table (DAT) entry is present. This can create a race
between device attachment (after DAA) and the point where the client
driver enables IBIs via i3c_device_enable_ibi().
Set DEV_ADDR_TABLE_SIR_REJECT in the DAT entry during
attach_i3c_dev() and reattach_i3c_dev() so that IBIs are rejected
by default. The bit is managed thereafter by the existing
dw_i3c_master_set_sir_enabled() function, which clears it in
enable_ibi() after ENEC is issued, and restores it in disable_ibi()
after DISEC.
Fixes: 1dd728f5d4d4 ("i3c: master: Add driver for Synopsys DesignWare IP")
Signed-off-by: Adrian Ng Ho Yin <adrianhoyin.ng@altera.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/53f5b8cbdd8af789ec38b95b02873f32f9182dd6.1770962368.git.adrianhoyin.ng@altera.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The DesignWare I3C master driver creates a virtual I2C adapter to
provide backward compatibility with I2C devices. However, the current
implementation does not associate this virtual adapter with any
Device Tree node.
Propagate the of_node from the I3C master platform device to the
virtual I2C adapter's device structure. This ensures that standard
I2C aliases are correctly resolved and bus numbering remains consistent.
Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260302075645.1492766-1-peteryin.openbmc@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Disruption of the MIPI I3C HCI controller's internal state can cause
i3c_hci_bus_disable() to fail when attempting to shut down the bus.
In the code paths where bus disable is invoked - bus clean-up and runtime
suspend - the controller does not need to remain operational afterward, so
a full controller reset is a safe recovery mechanism.
Add a fallback to issue a software reset when disabling the bus fails.
This ensures the bus is reliably halted even if the controller's state
machine is stuck or unresponsive.
The fallback is used both during bus clean-up and in the runtime suspend
path. In the latter case, ensure interrupts are quiesced after reset.
Fixes: 9ad9a52cce282 ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-15-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Shared interrupts may fire unexpectedly, including during periods when the
controller is not yet fully initialized. Commit b9a15012a1452
("i3c: mipi-i3c-hci: Add optional Runtime PM support") addressed this issue
for the runtime-suspended state, but the same problem can also occur before
the bus is enabled for the first time.
Ensure the IRQ handler ignores interrupts until initialization is complete
by making consistent use of the existing irq_inactive flag. The flag is
now set to false immediately before enabling the bus.
To guarantee correct ordering with respect to the IRQ handler, protect
all transitions of irq_inactive with the same spinlock used inside the
handler.
Fixes: b8460480f62e1 ("i3c: mipi-i3c-hci: Allow for Multi-Bus Instances")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-14-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The DMA ring halts whenever a transfer encounters an error. The interrupt
handler previously attempted to detect this situation and restart the ring
if a transfer completed at the same time. However, this restart logic runs
entirely in interrupt context and is inherently racy: it interacts with
other paths manipulating the ring state, and fully serializing it within
the interrupt handler is not practical.
Move this error-recovery logic out of the interrupt handler and into the
transfer-processing path (i3c_hci_process_xfer()), where serialization and
state management are already controlled. Introduce a new optional I/O-ops
callback, handle_error(), invoked when a completed transfer reports an
error. For DMA operation, the implementation simply calls the existing
dequeue function, which safely aborts and restarts the ring when needed.
This removes the fragile ring-restart logic from the interrupt handler and
centralizes error handling where proper sequencing can be ensured.
Fixes: ccdb2e0e3b00d ("i3c: mipi-i3c-hci: Add Intel specific quirk to ring resuming")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-13-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
