| Age | Commit message (Collapse) | Author |
|---|
|
The runtime PM suspend callback doesn't know whether the IRQ handler is
in progress on a different CPU core and doesn't wait for it to finish.
Depending on timing, the IRQ handler could be running while the GPU is
suspended, leading to kernel crashes when trying to access GPU
registers. See example signature below.
In a power off sequence initiated by the runtime PM suspend callback,
wait for any IRQ handlers in progress on other CPU cores to finish, by
calling synchronize_irq().
At the same time, remove the runtime PM resume/put calls in the threaded
IRQ handler. On top of not being the right approach to begin with, and
being at the wrong place as they should have wrapped all GPU register
accesses, the driver would hit a deadlock between synchronize_irq()
being called from a runtime PM suspend callback, holding the device
power lock, and the resume callback requiring the same.
Example crash signature on a TI AM68 SK platform:
[ 337.241218] SError Interrupt on CPU0, code 0x00000000bf000000 -- SError
[ 337.241239] CPU: 0 UID: 0 PID: 112 Comm: irq/234-gpu Tainted: G M 6.17.7-B2C-00005-g9c7bbe4ea16c #2 PREEMPT
[ 337.241246] Tainted: [M]=MACHINE_CHECK
[ 337.241249] Hardware name: Texas Instruments AM68 SK (DT)
[ 337.241252] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 337.241256] pc : pvr_riscv_irq_pending+0xc/0x24
[ 337.241277] lr : pvr_device_irq_thread_handler+0x64/0x310
[ 337.241282] sp : ffff800085b0bd30
[ 337.241284] x29: ffff800085b0bd50 x28: ffff0008070d9eab x27: ffff800083a5ce10
[ 337.241291] x26: ffff000806e48f80 x25: ffff0008070d9eac x24: 0000000000000000
[ 337.241296] x23: ffff0008068e9bf0 x22: ffff0008068e9bd0 x21: ffff800085b0bd30
[ 337.241301] x20: ffff0008070d9e00 x19: ffff0008068e9000 x18: 0000000000000001
[ 337.241305] x17: 637365645f656c70 x16: 0000000000000000 x15: ffff000b7df9ff40
[ 337.241310] x14: 0000a585fe3c0d0e x13: 000000999704f060 x12: 000000000002771a
[ 337.241314] x11: 00000000000000c0 x10: 0000000000000af0 x9 : ffff800085b0bd00
[ 337.241318] x8 : ffff0008071175d0 x7 : 000000000000b955 x6 : 0000000000000003
[ 337.241323] x5 : 0000000000000000 x4 : 0000000000000002 x3 : 0000000000000000
[ 337.241327] x2 : ffff800080e39d20 x1 : ffff800080e3fc48 x0 : 0000000000000000
[ 337.241333] Kernel panic - not syncing: Asynchronous SError Interrupt
[ 337.241337] CPU: 0 UID: 0 PID: 112 Comm: irq/234-gpu Tainted: G M 6.17.7-B2C-00005-g9c7bbe4ea16c #2 PREEMPT
[ 337.241342] Tainted: [M]=MACHINE_CHECK
[ 337.241343] Hardware name: Texas Instruments AM68 SK (DT)
[ 337.241345] Call trace:
[ 337.241348] show_stack+0x18/0x24 (C)
[ 337.241357] dump_stack_lvl+0x60/0x80
[ 337.241364] dump_stack+0x18/0x24
[ 337.241368] vpanic+0x124/0x2ec
[ 337.241373] abort+0x0/0x4
[ 337.241377] add_taint+0x0/0xbc
[ 337.241384] arm64_serror_panic+0x70/0x80
[ 337.241389] do_serror+0x3c/0x74
[ 337.241392] el1h_64_error_handler+0x30/0x48
[ 337.241400] el1h_64_error+0x6c/0x70
[ 337.241404] pvr_riscv_irq_pending+0xc/0x24 (P)
[ 337.241410] irq_thread_fn+0x2c/0xb0
[ 337.241416] irq_thread+0x170/0x334
[ 337.241421] kthread+0x12c/0x210
[ 337.241428] ret_from_fork+0x10/0x20
[ 337.241434] SMP: stopping secondary CPUs
[ 337.241451] Kernel Offset: disabled
[ 337.241453] CPU features: 0x040000,02002800,20002001,0400421b
[ 337.241456] Memory Limit: none
[ 337.457921] ---[ end Kernel panic - not syncing: Asynchronous SError Interrupt ]---
Fixes: cc1aeedb98ad ("drm/imagination: Implement firmware infrastructure and META FW support")
Fixes: 96822d38ff57 ("drm/imagination: Handle Rogue safety event IRQs")
Cc: stable@vger.kernel.org # see patch description, needs adjustments for < 6.16
Signed-off-by: Alessio Belle <alessio.belle@imgtec.com>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Link: https://patch.msgid.link/20260310-drain-irqs-before-suspend-v1-1-bf4f9ed68e75@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
|
|
The soft reset sequence is currently executed from the threaded IRQ
handler, hence it cannot call disable_irq() which internally waits
for IRQ handlers, i.e. itself, to complete.
Use disable_irq_nosync() during a soft reset instead.
Fixes: cc1aeedb98ad ("drm/imagination: Implement firmware infrastructure and META FW support")
Cc: stable@vger.kernel.org
Signed-off-by: Alessio Belle <alessio.belle@imgtec.com>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Link: https://patch.msgid.link/20260309-fix-soft-reset-v1-1-121113be554f@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
|
|
For file systems implementing ->sync_lazytime, I_DIRTY_TIME fails to get
cleared in sync_lazytime, and might cause additional calls to
sync_lazytime during inode deactivation. Use the same pattern as in
__mark_inode_dirty to clear the flag under the inode lock.
Fixes: 5cf06ea56ee6 ("fs: add a ->sync_lazytime method")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260317134409.1691317-1-hch@lst.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add VID/PID 33f8:1003 for the Rolling Wireless RW135R-GL M.2 module,
which is used in laptop debug cards with MBIM interface for
Linux/Chrome OS. The device supports mbim, pipe functionalities.
Here are the outputs of usb-devices:
T: Bus=04 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0
D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
P: Vendor=33f8 ProdID=1003 Rev=05.15
S: Manufacturer=Rolling Wireless S.a.r.l.
S: Product=Rolling RW135R-GL Module
S: SerialNumber=12345678
C: #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=896mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option
E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
Signed-off-by: Wanquan Zhong <wanquan.zhong@fibocom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Using "(u64 __user *)hva + offset" to get the virtual addresses of S1/S2
descriptors looks really wrong, if offset is not zero. What we want to get
for swapping is hva + offset, not hva + offset*8. ;-)
Fix it.
Fixes: f6927b41d573 ("KVM: arm64: Add helper for swapping guest descriptor")
Signed-off-by: Zenghui Yu (Huawei) <zenghui.yu@linux.dev>
Link: https://patch.msgid.link/20260317115748.47332-1-zenghui.yu@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
|
|
Previously, commit 8388f7df936b ("iommu/amd: Do not support
IOMMU_DOMAIN_IDENTITY after SNP is enabled") prevented users from
changing the IOMMU domain to identity if SNP was enabled.
This resulted in an error when writing to sysfs:
# echo "identity" > /sys/kernel/iommu_groups/50/type
-bash: echo: write error: Cannot allocate memory
However, commit 4402f2627d30 ("iommu/amd: Implement global identity
domain") changed the flow of the code, skipping the SNP guard and
allowing users to change the IOMMU domain to identity after a machine
has booted.
Once the user does that, they will probably try to bind and the
device/driver will start to do DMA which will trigger errors:
iommu ivhd3: AMD-Vi: Event logged [ILLEGAL_DEV_TABLE_ENTRY device=0000:43:00.0 pasid=0x00000 address=0x3737b01000 flags=0x0020]
iommu ivhd3: AMD-Vi: Control Reg : 0xc22000142148d
AMD-Vi: DTE[0]: 6000000000000003
AMD-Vi: DTE[1]: 0000000000000001
AMD-Vi: DTE[2]: 2000003088b3e013
AMD-Vi: DTE[3]: 0000000000000000
bnxt_en 0000:43:00.0 (unnamed net_device) (uninitialized): Error (timeout: 500015) msg {0x0 0x0} len:0
iommu ivhd3: AMD-Vi: Event logged [ILLEGAL_DEV_TABLE_ENTRY device=0000:43:00.0 pasid=0x00000 address=0x3737b01000 flags=0x0020]
iommu ivhd3: AMD-Vi: Control Reg : 0xc22000142148d
AMD-Vi: DTE[0]: 6000000000000003
AMD-Vi: DTE[1]: 0000000000000001
AMD-Vi: DTE[2]: 2000003088b3e013
AMD-Vi: DTE[3]: 0000000000000000
bnxt_en 0000:43:00.0: probe with driver bnxt_en failed with error -16
To prevent this from happening, create an attach wrapper for
identity_domain_ops which returns EINVAL if amd_iommu_snp_en is true.
With this commit applied:
# echo "identity" > /sys/kernel/iommu_groups/62/type
-bash: echo: write error: Invalid argument
Fixes: 4402f2627d30 ("iommu/amd: Implement global identity domain")
Signed-off-by: Joe Damato <joe@dama.to>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
domain->mm->iommu_mm can be freed by iommu_domain_free():
iommu_domain_free()
mmdrop()
__mmdrop()
mm_pasid_drop()
After iommu_domain_free() returns, accessing domain->mm->iommu_mm may
dereference a freed mm structure, leading to a crash.
Fix this by moving the code that accesses domain->mm->iommu_mm to before
the call to iommu_domain_free().
Fixes: e37d5a2d60a3 ("iommu/sva: invalidate stale IOTLB entries for kernel address space")
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Avoid kernel-doc warnings in io-pgtable.h:
- use the correct struct member names or kernel-doc format
- add a missing struct member description
- add a missing function return comment section
Warning: include/linux/io-pgtable.h:187 struct member 'coherent_walk' not
described in 'io_pgtable_cfg'
Warning: include/linux/io-pgtable.h:187 struct member 'arm_lpae_s1_cfg' not
described in 'io_pgtable_cfg'
Warning: include/linux/io-pgtable.h:187 struct member 'arm_lpae_s2_cfg' not
described in 'io_pgtable_cfg'
Warning: include/linux/io-pgtable.h:187 struct member 'arm_v7s_cfg' not
described in 'io_pgtable_cfg'
Warning: include/linux/io-pgtable.h:187 struct member 'arm_mali_lpae_cfg'
not described in 'io_pgtable_cfg'
Warning: include/linux/io-pgtable.h:187 struct member 'apple_dart_cfg' not
described in 'io_pgtable_cfg'
Warning: include/linux/io-pgtable.h:187 struct member 'amd' not described
in 'io_pgtable_cfg'
Warning: include/linux/io-pgtable.h:223 struct member
'read_and_clear_dirty' not described in 'io_pgtable_ops'
Warning: include/linux/io-pgtable.h:237 No description found for return
value of 'alloc_io_pgtable_ops'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
syzbot reports "task hung in rpm_resume"
This is caused by aqc111_suspend calling
the PM variant of its write_cmd routine.
The simplified call trace looks like this:
rpm_suspend()
usb_suspend_both() - here udev->dev.power.runtime_status == RPM_SUSPENDING
aqc111_suspend() - called for the usb device interface
aqc111_write32_cmd()
usb_autopm_get_interface()
pm_runtime_resume_and_get()
rpm_resume() - here we call rpm_resume() on our parent
rpm_resume() - Here we wait for a status change that will never happen.
At this point we block another task which holds
rtnl_lock and locks up the whole networking stack.
Fix this by replacing the write_cmd calls with their _nopm variants
Reported-by: syzbot+48dc1e8dfc92faf1124c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=48dc1e8dfc92faf1124c
Fixes: e58ba4544c77 ("net: usb: aqc111: Add support for wake on LAN by MAGIC packet")
Signed-off-by: Nikola Z. Ivanov <zlatistiv@gmail.com>
Link: https://patch.msgid.link/20260313141643.1181386-1-zlatistiv@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit 789a5913b29c ("iommu/amd: Use the generic iommu page table")
introduces the shared iommu page table for AMD IOMMU. Some bioses
contain an identity mapping for address 0x0, which is not parsed
properly (e.g., certain Strix Halo devices). This causes the DMA
components of the device to fail to initialize (e.g., the NVMe SSD
controller), leading to a failed post.
Specifically, on the GPD Win 5, the NVME and SSD GPU fail to mount,
making collecting errors difficult. While debugging, it was found that
a -EADDRINUSE error was emitted and its source was traced to
iommu_iova_to_phys(). After adding some debug prints, it was found that
phys_addr becomes 0, which causes the code to try to re-map the 0
address and fail, causing a cascade leading to a failed post. This is
because the GPD Win 5 contains a 0x0-0x1 identity mapping for DMA
devices, causing it to be repeated for each device.
The cause of this failure is the following check in
iommu_create_device_direct_mappings(), where address aliasing is handled
via the following check:
```
phys_addr = iommu_iova_to_phys(domain, addr);
if (!phys_addr) {
map_size += pg_size;
continue;
}
````
Obviously, the iommu_iova_to_phys() signature is faulty and aliases
unmapped and 0 together, causing the allocation code to try to
re-allocate the 0 address per device. However, it has too many
instantiations to fix. Therefore, use a ternary so that when addr
is 0, the check is done for address 1 instead.
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Fixes: 789a5913b29c ("iommu/amd: Use the generic iommu page table")
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Add a compatible string for SPDIF on RK3576, which is similar to the
one on RK3568.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20260316-rk3576-spdif-v1-1-acb75088b560@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In intel_svm_set_dev_pasid(), the driver unconditionally manages the IOPF
handling during a domain transition. However, commit a86fb7717320
("iommu/vt-d: Allow SVA with device-specific IOPF") introduced support for
SVA on devices that handle page faults internally without utilizing the
PCI PRI. On such devices, the IOMMU-side IOPF infrastructure is not
required. Calling iopf_for_domain_replace() on these devices is incorrect
and can lead to unexpected failures during PASID attachment or unwinding.
Add a check for info->pri_supported to ensure that the IOPF queue logic
is only invoked for devices that actually rely on the IOMMU's PRI-based
fault handling.
Fixes: 17fce9d2336d ("iommu/vt-d: Put iopf enablement in domain attach path")
Cc: stable@vger.kernel.org
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20260310075520.295104-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
During the qi_check_fault process after an IOMMU ITE event, requests at
odd-numbered positions in the queue are set to QI_ABORT, only satisfying
single-request submissions. However, qi_submit_sync now supports multiple
simultaneous submissions, and can't guarantee that the wait_desc will be
at an odd-numbered position. Therefore, if an item times out, IOMMU can't
re-initiate the request, resulting in an infinite polling wait.
This modifies the process by setting the status of all requests already
fetched by IOMMU and recorded as QI_IN_USE status (including wait_desc
requests) to QI_ABORT, thus enabling multiple requests to be resubmitted.
Fixes: 8a1d82462540 ("iommu/vt-d: Multiple descriptors per qi_submit_sync()")
Cc: stable@vger.kernel.org
Signed-off-by: Guanghui Feng <guanghuifeng@linux.alibaba.com>
Tested-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Link: https://lore.kernel.org/r/20260306101516.3885775-1-guanghuifeng@linux.alibaba.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Fixes: 8a1d82462540 ("iommu/vt-d: Multiple descriptors per qi_submit_sync()")
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus
Mika writes:
thunderbolt: Fix for v7.0-rc5
This includes a single fix that reverses the check for return value of
device_property_read_u8() during the driver load.
This has been in linux-next with no reported issues.
* tag 'thunderbolt-for-v7.0-rc5' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Fix property read in nhi_wake_supported()
|
|
Fix a use-after-free in the clsact qdisc upon init/destroy rollback asymmetry.
The latter is achieved by first fully initializing a clsact instance, and
then in a second step having a replacement failure for the new clsact qdisc
instance. clsact_init() initializes ingress first and then takes care of the
egress part. This can fail midway, for example, via tcf_block_get_ext(). Upon
failure, the kernel will trigger the clsact_destroy() callback.
Commit 1cb6f0bae504 ("bpf: Fix too early release of tcx_entry") details the
way how the transition is happening. If tcf_block_get_ext on the q->ingress_block
ends up failing, we took the tcx_miniq_inc reference count on the ingress
side, but not yet on the egress side. clsact_destroy() tests whether the
{ingress,egress}_entry was non-NULL. However, even in midway failure on the
replacement, both are in fact non-NULL with a valid egress_entry from the
previous clsact instance.
What we really need to test for is whether the qdisc instance-specific ingress
or egress side previously got initialized. This adds a small helper for checking
the miniq initialization called mini_qdisc_pair_inited, and utilizes that upon
clsact_destroy() in order to fix the use-after-free scenario. Convert the
ingress_destroy() side as well so both are consistent to each other.
Fixes: 1cb6f0bae504 ("bpf: Fix too early release of tcx_entry")
Reported-by: Keenan Dong <keenanat2000@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260313065531.98639-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
A single AXIDMA controller can have one or two channels. When it has two
channels, the reset for both are tied together: resetting one channel
resets the other as well. This creates a problem where resetting one
channel will reset the registers for both channels, including clearing
interrupt enable bits for the other channel, which can then lead to
timeouts as the driver is waiting for an interrupt which never comes.
The driver currently has a probe-time work around for this: when a
channel is created, the driver also resets and enables the
interrupts. With two channels the reset for the second channel will
clear the interrupt enables for the first one. The work around in the
driver is just to manually enable the interrupts again in
xilinx_dma_alloc_chan_resources().
This workaround only addresses the probe-time issue. When channels are
reset at runtime (e.g., in xilinx_dma_terminate_all() or during error
recovery), there's no corresponding mechanism to restore the other
channel's interrupt enables. This leads to one channel having its
interrupts disabled while the driver expects them to work, causing
timeouts and DMA failures.
A proper fix is a complicated matter, as we should not reset the other
channel when it's operating normally. So, perhaps, there should be some
kind of synchronization for a common reset, which is not trivial to
implement. To add to the complexity, the driver also supports other DMA
types, like VDMA, CDMA and MCDMA, which don't have a shared reset.
However, when the two-channel AXIDMA is used in the (assumably) normal
use case, providing DMA for a single memory-to-memory device, the common
reset is a bit smaller issue: when something bad happens on one channel,
or when one channel is terminated, the assumption is that we also want
to terminate the other channel. And thus resetting both at the same time
is "ok".
With that line of thinking we can implement a bit better work around
than just the current probe time work around: let's enable the
AXIDMA interrupts at xilinx_dma_start_transfer() instead.
This ensures interrupts are enabled whenever a transfer starts,
regardless of any prior resets that may have cleared them.
This approach is also more logical: enable interrupts only when needed
for a transfer, rather than at resource allocation time, and, I think,
all the other DMA types should also use this model, but I'm reluctant to
do such changes as I cannot test them.
The reset function still enables interrupts even though it's not needed
for AXIDMA anymore, but it's common code for all DMA types (VDMA, CDMA,
MCDMA), so leave it unchanged to avoid affecting other variants.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Fixes: c0bba3a99f07 ("dmaengine: vdma: Add Support for Xilinx AXI Direct Memory Access Engine")
Link: https://patch.msgid.link/20260311-xilinx-dma-fix-v2-1-a725abb66e3c@ideasonboard.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The segment .control and .status fields both contain top bits which are
not part of the buffer size, the buffer size is located only in the bottom
max_buffer_len bits. To avoid interference from those top bits, mask out
the size using max_buffer_len first, and only then subtract the values.
Fixes: a575d0b4e663 ("dmaengine: xilinx_dma: Introduce xilinx_dma_get_residue")
Signed-off-by: Marek Vasut <marex@nabladev.com>
Link: https://patch.msgid.link/20260316222530.163815-1-marex@nabladev.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The cyclic DMA calculation is currently entirely broken and reports
residue only for the first segment. The problem is twofold.
First, when the first descriptor finishes, it is moved from active_list
to done_list, but it is never returned back into the active_list. The
xilinx_dma_tx_status() expects the descriptor to be in the active_list
to report any meaningful residue information, which never happens after
the first descriptor finishes. Fix this up in xilinx_dma_start_transfer()
and if the descriptor is cyclic, lift it from done_list and place it back
into active_list list.
Second, the segment .status fields of the descriptor remain dirty. Once
the DMA did one pass on the descriptor, the .status fields are populated
with data by the DMA, but the .status fields are not cleared before reuse
during the next cyclic DMA round. The xilinx_dma_get_residue() recognizes
that as if the descriptor was complete and had 0 residue, which is bogus.
Reinitialize the status field before placing the descriptor back into the
active_list.
Fixes: c0bba3a99f07 ("dmaengine: vdma: Add Support for Xilinx AXI Direct Memory Access Engine")
Signed-off-by: Marek Vasut <marex@nabladev.com>
Link: https://patch.msgid.link/20260316221943.160375-1-marex@nabladev.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Unlike chan->direction , struct dma_device .directions field is a
bitfield. Turn chan->direction into a bitfield to make it compatible
with struct dma_device .directions .
Fixes: 7e01511443c3 ("dmaengine: xilinx_dma: Set dma_device directions")
Signed-off-by: Marek Vasut <marex@nabladev.com>
Link: https://patch.msgid.link/20260316221728.160139-1-marex@nabladev.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
iptfs_clone_state() stores x->mode_data before allocating the reorder
window. If that allocation fails, the code frees the cloned state and
returns -ENOMEM, leaving x->mode_data pointing at freed memory.
The xfrm clone unwind later runs destroy_state() through x->mode_data,
so the failed clone path tears down IPTFS state that clone_state()
already freed.
Keep the cloned IPTFS state private until all allocations succeed so
failed clones leave x->mode_data unset. The destroy path already
handles a NULL mode_data pointer.
Fixes: 6be02e3e4f37 ("xfrm: iptfs: handle reordering of received packets")
Cc: stable@vger.kernel.org
Signed-off-by: Paul Moses <p@1g4.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
[BUG]
When recovering relocation at mount time, merge_reloc_root() and
btrfs_drop_snapshot() both use BUG_ON(level == 0) to guard against
an impossible state: a non-zero drop_progress combined with a zero
drop_level in a root_item, which can be triggered:
------------[ cut here ]------------
kernel BUG at fs/btrfs/relocation.c:1545!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
CPU: 1 UID: 0 PID: 283 ... Tainted: 6.18.0+ #16 PREEMPT(voluntary)
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: QEMU Ubuntu 24.04 PC v2, BIOS 1.16.3-debian-1.16.3-2
RIP: 0010:merge_reloc_root+0x1266/0x1650 fs/btrfs/relocation.c:1545
Code: ffff0000 00004589 d7e9acfa ffffe8a1 79bafebe 02000000
Call Trace:
merge_reloc_roots+0x295/0x890 fs/btrfs/relocation.c:1861
btrfs_recover_relocation+0xd6e/0x11d0 fs/btrfs/relocation.c:4195
btrfs_start_pre_rw_mount+0xa4d/0x1810 fs/btrfs/disk-io.c:3130
open_ctree+0x5824/0x5fe0 fs/btrfs/disk-io.c:3640
btrfs_fill_super fs/btrfs/super.c:987 [inline]
btrfs_get_tree_super fs/btrfs/super.c:1951 [inline]
btrfs_get_tree_subvol fs/btrfs/super.c:2094 [inline]
btrfs_get_tree+0x111c/0x2190 fs/btrfs/super.c:2128
vfs_get_tree+0x9a/0x370 fs/super.c:1758
fc_mount fs/namespace.c:1199 [inline]
do_new_mount_fc fs/namespace.c:3642 [inline]
do_new_mount fs/namespace.c:3718 [inline]
path_mount+0x5b8/0x1ea0 fs/namespace.c:4028
do_mount fs/namespace.c:4041 [inline]
__do_sys_mount fs/namespace.c:4229 [inline]
__se_sys_mount fs/namespace.c:4206 [inline]
__x64_sys_mount+0x282/0x320 fs/namespace.c:4206
...
RIP: 0033:0x7f969c9a8fde
Code: 0f1f4000 48c7c2b0 fffffff7 d8648902 b8ffffff ffc3660f
---[ end trace 0000000000000000 ]---
The bug is reproducible on 7.0.0-rc2-next-20260310 with our dynamic
metadata fuzzing tool that corrupts btrfs metadata at runtime.
[CAUSE]
A non-zero drop_progress.objectid means an interrupted
btrfs_drop_snapshot() left a resume point on disk, and in that case
drop_level must be greater than 0 because the checkpoint is only
saved at internal node levels.
Although this invariant is enforced when the kernel writes the root
item, it is not validated when the root item is read back from disk.
That allows on-disk corruption to provide an invalid state with
drop_progress.objectid != 0 and drop_level == 0.
When relocation recovery later processes such a root item,
merge_reloc_root() reads drop_level and hits BUG_ON(level == 0). The
same invalid metadata can also trigger the corresponding BUG_ON() in
btrfs_drop_snapshot().
[FIX]
Fix this by validating the root_item invariant in tree-checker when
reading root items from disk: if drop_progress.objectid is non-zero,
drop_level must also be non-zero. Reject such malformed metadata with
-EUCLEAN before it reaches merge_reloc_root() or btrfs_drop_snapshot()
and triggers the BUG_ON.
After the fix, the same corruption is correctly rejected by tree-checker
and the BUG_ON is no longer triggered.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: ZhengYuan Huang <gality369@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Fix a potential segfault in balance_remap_chunks(): if we quit early
because btrfs_inc_block_group_ro() fails, all the remaining items in the
chunks list will still have their bg value set to NULL. It's thus not
safe to dereference this pointer without checking first.
Reported-by: Chris Mason <clm@fb.com>
Link: https://lore.kernel.org/linux-btrfs/20260125120717.1578828-1-clm@meta.com/
Fixes: 81e5a4551c32 ("btrfs: allow balancing remap tree")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There is a potential use-after-free in move_existing_remap(): we're calling
btrfs_put_block_group() on dest_bg, then passing it to
btrfs_add_block_group_free_space() a few lines later.
Fix this by getting the BG at the start of the function and putting it
near the end. This also means we're not doing a lookup twice for the
same thing.
Reported-by: Chris Mason <clm@fb.com>
Link: https://lore.kernel.org/linux-btrfs/20260125123908.2096548-1-clm@meta.com/
Fixes: bbea42dfb91f ("btrfs: move existing remaps before relocating block group")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
When running btrfs/284 with 64K page size and 4K fs block size, it
crashes with the following ASSERT() triggered:
BTRFS info (device dm-3): use lzo compression, level 1
assertion failed: folio_size(fi.folio) == sectorsize :: 0, in lzo.c:450
------------[ cut here ]------------
kernel BUG at lzo.c:450!
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
CPU: 4 UID: 0 PID: 329 Comm: kworker/u37:2 Tainted: G OE 6.19.0-rc8-custom+ #185 PREEMPT(voluntary)
Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022
Workqueue: btrfs-endio simple_end_io_work [btrfs]
pc : lzo_decompress_bio+0x61c/0x630 [btrfs]
lr : lzo_decompress_bio+0x61c/0x630 [btrfs]
Call trace:
lzo_decompress_bio+0x61c/0x630 [btrfs] (P)
end_bbio_compressed_read+0x2a8/0x2c0 [btrfs]
btrfs_bio_end_io+0xc4/0x258 [btrfs]
btrfs_check_read_bio+0x424/0x7e0 [btrfs]
simple_end_io_work+0x40/0xa8 [btrfs]
process_one_work+0x168/0x3f0
worker_thread+0x25c/0x398
kthread+0x154/0x250
ret_from_fork+0x10/0x20
Code: 912a2021 b0000e00 91246000 940244e9 (d4210000)
---[ end trace 0000000000000000 ]---
[CAUSE]
Commit 37cc07cab7dc ("btrfs: lzo: use folio_iter to handle
lzo_decompress_bio()") added the ASSERT() to make sure the folio size
matches the fs block size.
But the check is completely wrong, the original intention is to make
sure for bs > ps cases, we always got a large folio that covers a full fs
block.
However for bs < ps cases, a folio can never be smaller than page size,
and the ASSERT() gets triggered immediately.
[FIX]
Check the folio size against @min_folio_size instead, which will never
be smaller than PAGE_SIZE, and still cover bs > ps cases.
Fixes: 37cc07cab7dc ("btrfs: lzo: use folio_iter to handle lzo_decompress_bio()")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
When running btrfs/284 with 64K page size and 4K fs block size, it
crashes with the following ASSERT() triggered:
assertion failed: folio_size(fi.folio) == blocksize :: 0, in fs/btrfs/zstd.c:603
------------[ cut here ]------------
kernel BUG at fs/btrfs/zstd.c:603!
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
CPU: 2 UID: 0 PID: 1183 Comm: kworker/u35:4 Not tainted 6.19.0-rc8-custom+ #185 PREEMPT(voluntary)
Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022
Workqueue: btrfs-endio simple_end_io_work [btrfs]
pc : zstd_decompress_bio+0x4f0/0x508 [btrfs]
lr : zstd_decompress_bio+0x4f0/0x508 [btrfs]
Call trace:
zstd_decompress_bio+0x4f0/0x508 [btrfs] (P)
end_bbio_compressed_read+0x260/0x2c0 [btrfs]
btrfs_bio_end_io+0xc4/0x258 [btrfs]
btrfs_check_read_bio+0x424/0x7e0 [btrfs]
simple_end_io_work+0x40/0xa8 [btrfs]
process_one_work+0x168/0x3f0
worker_thread+0x25c/0x398
kthread+0x154/0x250
ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]---
[CAUSE]
Commit 1914b94231e9 ("btrfs: zstd: use folio_iter to handle
zstd_decompress_bio()") added the ASSERT() to make sure the folio size
matches the fs block size.
But the check is completely wrong, the original intention is to make
sure for bs > ps cases, we always got a large folio that covers a full fs
block.
However for bs < ps cases, a folio can never be smaller than page size,
and the ASSERT() gets triggered immediately.
[FIX]
Check the folio size against @min_folio_size instead, which will never
be smaller than PAGE_SIZE, and still cover bs > ps cases.
Fixes: 1914b94231e9 ("btrfs: zstd: use folio_iter to handle zstd_decompress_bio()")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
When running btrfs/284, the following ASSERT() will be triggered with
64K page size and 4K fs block size:
assertion failed: folio_test_writeback(folio) :: 0, in subpage.c:476
------------[ cut here ]------------
kernel BUG at subpage.c:476!
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
CPU: 4 UID: 0 PID: 2313 Comm: kworker/u37:2 Tainted: G OE 6.19.0-rc8-custom+ #185 PREEMPT(voluntary)
Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022
Workqueue: btrfs-endio simple_end_io_work [btrfs]
pc : btrfs_subpage_clear_writeback+0x148/0x160 [btrfs]
lr : btrfs_subpage_clear_writeback+0x148/0x160 [btrfs]
Call trace:
btrfs_subpage_clear_writeback+0x148/0x160 [btrfs] (P)
btrfs_folio_clamp_clear_writeback+0xb4/0xd0 [btrfs]
end_compressed_writeback+0xe0/0x1e0 [btrfs]
end_bbio_compressed_write+0x1e8/0x218 [btrfs]
btrfs_bio_end_io+0x108/0x258 [btrfs]
simple_end_io_work+0x68/0xa8 [btrfs]
process_one_work+0x168/0x3f0
worker_thread+0x25c/0x398
kthread+0x154/0x250
ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]---
[CAUSE]
The offending bio is from an encoded write, where the compressed data is
directly written as a data extent, without touching the page cache.
However the encoded write still utilizes the regular buffered write path
for compressed data, by setting the compressed_bio::writeback flag.
When that flag is set, at end_bbio_compressed_write() btrfs will go
clearing the writeback flag of the folios in the page cache.
However for bs < ps cases, the subpage helper has one extra check to make
sure the folio has a writeback flag set in the first place.
But since it's an encoded write, we never go through page
cache, thus the folio has no writeback flag and triggers the ASSERT().
[FIX]
Do not set compressed_bio::writeback flag for encoded writes, and change
the ASSERT() in btrfs_submit_compressed_write() to make sure that flag
is not set.
Fixes: e1bc83f8b157 ("btrfs: get rid of compressed_folios[] usage for encoded writes")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
When running btrfs/284 with 64K page size and 4K fs block size, the
following ASSERT() can be triggered:
assertion failed: cb->bbio.bio.bi_iter.bi_size == disk_num_bytes :: 0, in inode.c:9991
------------[ cut here ]------------
kernel BUG at inode.c:9991!
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
CPU: 5 UID: 0 PID: 6787 Comm: btrfs Tainted: G OE 6.19.0-rc8-custom+ #1 PREEMPT(voluntary)
Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022
pc : btrfs_do_encoded_write+0x9b0/0x9c0 [btrfs]
lr : btrfs_do_encoded_write+0x9b0/0x9c0 [btrfs]
Call trace:
btrfs_do_encoded_write+0x9b0/0x9c0 [btrfs] (P)
btrfs_do_write_iter+0x1d8/0x208 [btrfs]
btrfs_ioctl_encoded_write+0x3c8/0x6d0 [btrfs]
btrfs_ioctl+0xeb0/0x2b60 [btrfs]
__arm64_sys_ioctl+0xac/0x110
invoke_syscall.constprop.0+0x64/0xe8
el0_svc_common.constprop.0+0x40/0xe8
do_el0_svc+0x24/0x38
el0_svc+0x3c/0x1b8
el0t_64_sync_handler+0xa0/0xe8
el0t_64_sync+0x1a4/0x1a8
Code: 91180021 90001080 9111a000 94039d54 (d4210000)
---[ end trace 0000000000000000 ]---
[CAUSE]
After commit e1bc83f8b157 ("btrfs: get rid of compressed_folios[] usage
for encoded writes"), the encoded write is changed to copy the content
from the iov into a folio, and queue the folio into the compressed bio.
However we always queue the full folio into the compressed bio, which
can make the compressed bio larger than the on-disk extent, if the folio
size is larger than the fs block size.
Although we have an ASSERT() to catch such problem, for kernels without
CONFIG_BTRFS_ASSERT, such larger than expected bio will just be
submitted, possibly overwrite the next data extent, causing data
corruption.
[FIX]
Instead of blindly queuing the full folio into the compressed bio, only
queue the rounded up range, which is the old behavior before that
offending commit.
This also means we no longer need to zero the tailing range until the
folio end (but still to the block boundary), as such range will not be
submitted anyway.
And since we're here, add a final ASSERT() into
btrfs_submit_compressed_write() as the last safety net for kernels with
btrfs assertions enabled
Fixes: e1bc83f8b157 ("btrfs: get rid of compressed_folios[] usage for encoded writes")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently our qgroup ioctls don't reserve any space, they just do a
transaction join, which does not reserve any space, neither for the quota
tree updates nor for the delayed refs generated when updating the quota
tree. The quota root uses the global block reserve, which is fine most of
the time since we don't expect a lot of updates to the quota root, or to
be too close to -ENOSPC such that other critical metadata updates need to
resort to the global reserve.
However this is not optimal, as not reserving proper space may result in a
transaction abort due to not reserving space for delayed refs and then
abusing the use of the global block reserve.
For example, the following reproducer (which is unlikely to model any
real world use case, but just to illustrate the problem), triggers such a
transaction abort due to -ENOSPC when running delayed refs:
$ cat test.sh
#!/bin/bash
DEV=/dev/nullb0
MNT=/mnt/nullb0
umount $DEV &> /dev/null
# Limit device to 1G so that it's much faster to reproduce the issue.
mkfs.btrfs -f -b 1G $DEV
mount -o commit=600 $DEV $MNT
fallocate -l 800M $MNT/filler
btrfs quota enable $MNT
for ((i = 1; i <= 400000; i++)); do
btrfs qgroup create 1/$i $MNT
done
umount $MNT
When running this, we can see in dmesg/syslog that a transaction abort
happened:
[436.490] BTRFS error (device nullb0): failed to run delayed ref for logical 30408704 num_bytes 16384 type 176 action 1 ref_mod 1: -28
[436.493] ------------[ cut here ]------------
[436.494] BTRFS: Transaction aborted (error -28)
[436.495] WARNING: fs/btrfs/extent-tree.c:2247 at btrfs_run_delayed_refs+0xd9/0x110 [btrfs], CPU#4: umount/2495372
[436.497] Modules linked in: btrfs loop (...)
[436.508] CPU: 4 UID: 0 PID: 2495372 Comm: umount Tainted: G W 6.19.0-rc8-btrfs-next-225+ #1 PREEMPT(full)
[436.510] Tainted: [W]=WARN
[436.511] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[436.513] RIP: 0010:btrfs_run_delayed_refs+0xdf/0x110 [btrfs]
[436.514] Code: 0f 82 ea (...)
[436.518] RSP: 0018:ffffd511850b7d78 EFLAGS: 00010292
[436.519] RAX: 00000000ffffffe4 RBX: ffff8f120dad37e0 RCX: 0000000002040001
[436.520] RDX: 0000000000000002 RSI: 00000000ffffffe4 RDI: ffffffffc090fd80
[436.522] RBP: 0000000000000000 R08: 0000000000000001 R09: ffffffffc04d1867
[436.523] R10: ffff8f18dc1fffa8 R11: 0000000000000003 R12: ffff8f173aa89400
[436.524] R13: 0000000000000000 R14: ffff8f173aa89400 R15: 0000000000000000
[436.526] FS: 00007fe59045d840(0000) GS:ffff8f192e22e000(0000) knlGS:0000000000000000
[436.527] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[436.528] CR2: 00007fe5905ff2b0 CR3: 000000060710a002 CR4: 0000000000370ef0
[436.530] Call Trace:
[436.530] <TASK>
[436.530] btrfs_commit_transaction+0x73/0xc00 [btrfs]
[436.531] ? btrfs_attach_transaction_barrier+0x1e/0x70 [btrfs]
[436.532] sync_filesystem+0x7a/0x90
[436.533] generic_shutdown_super+0x28/0x180
[436.533] kill_anon_super+0x12/0x40
[436.534] btrfs_kill_super+0x12/0x20 [btrfs]
[436.534] deactivate_locked_super+0x2f/0xb0
[436.534] cleanup_mnt+0xea/0x180
[436.535] task_work_run+0x58/0xa0
[436.535] exit_to_user_mode_loop+0xed/0x480
[436.536] ? __x64_sys_umount+0x68/0x80
[436.536] do_syscall_64+0x2a5/0xf20
[436.537] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[436.537] RIP: 0033:0x7fe5906b6217
[436.538] Code: 0d 00 f7 (...)
[436.540] RSP: 002b:00007ffcd87a61f8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
[436.541] RAX: 0000000000000000 RBX: 00005618b9ecadc8 RCX: 00007fe5906b6217
[436.541] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00005618b9ecb100
[436.542] RBP: 0000000000000000 R08: 00007ffcd87a4fe0 R09: 00000000ffffffff
[436.544] R10: 0000000000000103 R11: 0000000000000246 R12: 00007fe59081626c
[436.544] R13: 00005618b9ecb100 R14: 0000000000000000 R15: 00005618b9ecacc0
[436.545] </TASK>
[436.545] ---[ end trace 0000000000000000 ]---
Fix this by changing the qgroup ioctls to use start transaction instead of
joining so that proper space is reserved for the delayed refs generated
for the updates to the quota root. This way we don't get any transaction
abort.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Both rz_dmac_disable_hw() and rz_dmac_irq_handle_channel() update the
CHCTRL register. To avoid concurrency issues when configuring
functionalities exposed by this registers, take the virtual channel lock.
All other CHCTRL updates were already protected by the same lock.
Previously, rz_dmac_disable_hw() disabled and re-enabled local IRQs, before
accessing CHCTRL registers but this does not ensure race-free access.
Remove the local IRQ disable/enable code as well.
Fixes: 5000d37042a6 ("dmaengine: sh: Add DMAC driver for RZ/G2L SoC")
Cc: stable@vger.kernel.org
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20260316133252.240348-3-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The driver lists (ld_free, ld_queue) are used in
rz_dmac_free_chan_resources(), rz_dmac_terminate_all(),
rz_dmac_issue_pending(), and rz_dmac_irq_handler_thread(), all under
the virtual channel lock. Take the same lock in rz_dmac_prep_slave_sg()
and rz_dmac_prep_dma_memcpy() as well to avoid concurrency issues, since
these functions also check whether the lists are empty and update or
remove list entries.
Fixes: 5000d37042a6 ("dmaengine: sh: Add DMAC driver for RZ/G2L SoC")
Cc: stable@vger.kernel.org
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20260316133252.240348-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
It is possible for a malicious (or clumsy) device to respond to a
specific report's feature request using a completely different report
ID. This can cause confusion in the HID core resulting in nasty
side-effects such as OOB writes.
Add a check to ensure that the report ID in the response, matches the
one that was requested. If it doesn't, omit reporting the raw event and
return early.
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
btrfs_csum_root() can return a NULL pointer in case the root we are
looking for is not in the rb tree that tracks roots. So add checks to
every caller that is missing such check to log a message and return
an error.
Reported-by: Chris Mason <clm@meta.com>
Link: https://lore.kernel.org/linux-btrfs/20260208161657.3972997-1-clm@meta.com/
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_extent_root() can return a NULL pointer in case the root we are
looking for is not in the rb tree that tracks roots. So add checks to
every caller that is missing such check to log a message and return
an error. The same applies to callers of btrfs_block_group_root(),
since it calls btrfs_extent_root().
Reported-by: Chris Mason <clm@meta.com>
Link: https://lore.kernel.org/linux-btrfs/20260208161657.3972997-1-clm@meta.com/
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When riscv_acpi_get_gsi_info() fails, the mailbox channel previously
requested via mbox_request_channel() is not freed. Add the missing
mbox_free_channel() call to prevent the resource leak.
Fixes: 4752b0cfbc37 ("irqchip/riscv-rpmi-sysmsi: Add ACPI support")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: stable@vger.kernel.org
Reviewed-by: Rahul Pathak <rahul@summations.net>
Link: https://patch.msgid.link/20260315-sysmsi-v1-1-5f090c86c2ca@gmail.com
|
|
PSR entry_setup_frames is currently computed directly into struct
intel_dp:intel_psr:entry_setup_frames. This causes a problem if mode change
gets rejected after PSR compute config: Psr_entry_setup_frames computed for
this rejected state is in intel_dp:intel_psr:entry_setup_frame. Fix this by
computing it into intel_crtc_state and copy the value into
intel_dp:intel_psr:entry_setup_frames on PSR enable.
Fixes: 2b981d57e480 ("drm/i915/display: Support PSR entry VSC packet to be transmitted one frame earlier")
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260312083710.1593781-3-jouni.hogander@intel.com
(cherry picked from commit 8c229b4aa00262c13787982e998c61c0783285e0)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
PSR/PR parameters might change based on update_m_n or update_lrr. Disable
on update_m_n and update_lrr to ensure proper parameters are taken into use
on next PSR enable in intel_psr_post_plane_update.
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15771
Fixes: 2bc98c6f97af ("drm/i915/alpm: Compute ALPM parameters into crtc_state->alpm_state")
Cc: <stable@vger.kernel.org> # v6.19+
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260312083710.1593781-2-jouni.hogander@intel.com
(cherry picked from commit 65852b56bfa929f99e28c96fd98b02058959da7f)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Similar to commit d8dc8720468a ("ALSA: firewire-lib: fix uninitialized
local variable"), the local variable `curr_cycle_time` in
process_rx_packets() is declared without initialization.
When the tracepoint event is not probed, the variable may appear to be
used without being initialized. In practice the value is only relevant
when the tracepoint is enabled, however initializing it avoids potential
use of an uninitialized value and improves code safety.
Initialize `curr_cycle_time` to zero.
Fixes: fef4e61b0b76 ("ALSA: firewire-lib: extend tracepoints event including CYCLE_TIME of 1394 OHCI")
Cc: stable@vger.kernel.org
Signed-off-by: Alexey Nepomnyashih <sdl@nppct.ru>
Link: https://patch.msgid.link/20260316191824.83249-1-sdl@nppct.ru
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
Fixing a missing of_node_put() call.
* tag 'v7.0-rockchip-drvfixes1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
soc: rockchip: grf: Add missing of_node_put() when returning
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
On some systems (e.g. iMac 20,1 with BCM57766), the tg3 driver reads
a default placeholder mac address (00:10:18:00:00:00) from the
mailbox. The correct value on those systems are stored in the
'local-mac-address' property.
This patch, detect the default value and tries to retrieve
the correct address from the device_get_mac_address
function instead.
The patch has been tested on two different systems:
- iMac 20,1 (BCM57766) model which use the local-mac-address property
- iMac 13,2 (BCM57766) model which can use the mailbox,
NVRAM or MAC control registers
Tested-by: Rishon Jonathan R <mithicalaviator85@gmail.com>
Co-developed-by: Vincent MORVAN <vinc@42.fr>
Signed-off-by: Vincent MORVAN <vinc@42.fr>
Signed-off-by: Paul SAGE <paul.sage@42.fr>
Signed-off-by: Atharva Tiwari <atharvatiwarilinuxdev@gmail.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20260314215432.3589-1-atharvatiwarilinuxdev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tobgaertner says:
====================
net: usb: cdc_ncm: add ndpoffset to NDP nframes bounds check
The nframes bounds check in cdc_ncm_rx_verify_ndp16() and
cdc_ncm_rx_verify_ndp32() does not account for ndpoffset,
allowing out-of-bounds reads when the NDP is placed near the
end of the NTB.
====================
Link: https://patch.msgid.link/20260314054640.2895026-1-tob.gaertner@me.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The same bounds-check bug fixed for NDP16 in the previous patch also
exists in cdc_ncm_rx_verify_ndp32(). The DPE array size is validated
against the total skb length without accounting for ndpoffset, allowing
out-of-bounds reads when the NDP32 is placed near the end of the NTB.
Add ndpoffset to the nframes bounds check and use struct_size_t() to
express the NDP-plus-DPE-array size more clearly.
Compile-tested only.
Fixes: 0fa81b304a79 ("cdc_ncm: Implement the 32-bit version of NCM Transfer Block")
Signed-off-by: Tobi Gaertner <tob.gaertner@me.com>
Link: https://patch.msgid.link/20260314054640.2895026-3-tob.gaertner@me.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
cdc_ncm_rx_verify_ndp16() validates that the NDP header and its DPE
entries fit within the skb. The first check correctly accounts for
ndpoffset:
if ((ndpoffset + sizeof(struct usb_cdc_ncm_ndp16)) > skb_in->len)
but the second check omits it:
if ((sizeof(struct usb_cdc_ncm_ndp16) +
ret * (sizeof(struct usb_cdc_ncm_dpe16))) > skb_in->len)
This validates the DPE array size against the total skb length as if
the NDP were at offset 0, rather than at ndpoffset. When the NDP is
placed near the end of the NTB (large wNdpIndex), the DPE entries can
extend past the skb data buffer even though the check passes.
cdc_ncm_rx_fixup() then reads out-of-bounds memory when iterating
the DPE array.
Add ndpoffset to the nframes bounds check and use struct_size_t() to
express the NDP-plus-DPE-array size more clearly.
Fixes: ff06ab13a4cc ("net: cdc_ncm: splitting rx_fixup for code reuse")
Signed-off-by: Tobi Gaertner <tob.gaertner@me.com>
Link: https://patch.msgid.link/20260314054640.2895026-2-tob.gaertner@me.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Do not run airoha_dev_stop routine explicitly in airoha_remove()
since ndo_stop() callback is already executed by unregister_netdev() in
__dev_close_many routine if necessary and, doing so, we will end up causing
an underflow in the qdma users atomic counters. Rely on networking subsystem
to stop the device removing the airoha_eth module.
Fixes: 23020f0493270 ("net: airoha: Introduce ethernet support for EN7581 SoC")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260313-airoha-remove-ndo_stop-remove-net-v2-1-67542c3ceeca@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Whenever a TEQL devices has a lockless Qdisc as root, qdisc_reset should
be called using the seq_lock to avoid racing with the datapath. Failure
to do so may cause crashes like the following:
[ 238.028993][ T318] BUG: KASAN: double-free in skb_release_data (net/core/skbuff.c:1139)
[ 238.029328][ T318] Free of addr ffff88810c67ec00 by task poc_teql_uaf_ke/318
[ 238.029749][ T318]
[ 238.029900][ T318] CPU: 3 UID: 0 PID: 318 Comm: poc_teql_ke Not tainted 7.0.0-rc3-00149-ge5b31d988a41 #704 PREEMPT(full)
[ 238.029906][ T318] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 238.029910][ T318] Call Trace:
[ 238.029913][ T318] <TASK>
[ 238.029916][ T318] dump_stack_lvl (lib/dump_stack.c:122)
[ 238.029928][ T318] print_report (mm/kasan/report.c:379 mm/kasan/report.c:482)
[ 238.029940][ T318] ? skb_release_data (net/core/skbuff.c:1139)
[ 238.029944][ T318] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
...
[ 238.029957][ T318] ? skb_release_data (net/core/skbuff.c:1139)
[ 238.029969][ T318] kasan_report_invalid_free (mm/kasan/report.c:221 mm/kasan/report.c:563)
[ 238.029979][ T318] ? skb_release_data (net/core/skbuff.c:1139)
[ 238.029989][ T318] check_slab_allocation (mm/kasan/common.c:231)
[ 238.029995][ T318] kmem_cache_free (mm/slub.c:2637 (discriminator 1) mm/slub.c:6168 (discriminator 1) mm/slub.c:6298 (discriminator 1))
[ 238.030004][ T318] skb_release_data (net/core/skbuff.c:1139)
...
[ 238.030025][ T318] sk_skb_reason_drop (net/core/skbuff.c:1256)
[ 238.030032][ T318] pfifo_fast_reset (./include/linux/ptr_ring.h:171 ./include/linux/ptr_ring.h:309 ./include/linux/skb_array.h:98 net/sched/sch_generic.c:827)
[ 238.030039][ T318] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
...
[ 238.030054][ T318] qdisc_reset (net/sched/sch_generic.c:1034)
[ 238.030062][ T318] teql_destroy (./include/linux/spinlock.h:395 net/sched/sch_teql.c:157)
[ 238.030071][ T318] __qdisc_destroy (./include/net/pkt_sched.h:328 net/sched/sch_generic.c:1077)
[ 238.030077][ T318] qdisc_graft (net/sched/sch_api.c:1062 net/sched/sch_api.c:1053 net/sched/sch_api.c:1159)
[ 238.030089][ T318] ? __pfx_qdisc_graft (net/sched/sch_api.c:1091)
[ 238.030095][ T318] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 238.030102][ T318] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 238.030106][ T318] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 238.030114][ T318] tc_get_qdisc (net/sched/sch_api.c:1529 net/sched/sch_api.c:1556)
...
[ 238.072958][ T318] Allocated by task 303 on cpu 5 at 238.026275s:
[ 238.073392][ T318] kasan_save_stack (mm/kasan/common.c:58)
[ 238.073884][ T318] kasan_save_track (mm/kasan/common.c:64 (discriminator 5) mm/kasan/common.c:79 (discriminator 5))
[ 238.074230][ T318] __kasan_slab_alloc (mm/kasan/common.c:369)
[ 238.074578][ T318] kmem_cache_alloc_node_noprof (./include/linux/kasan.h:253 mm/slub.c:4542 mm/slub.c:4869 mm/slub.c:4921)
[ 238.076091][ T318] kmalloc_reserve (net/core/skbuff.c:616 (discriminator 107))
[ 238.076450][ T318] __alloc_skb (net/core/skbuff.c:713)
[ 238.076834][ T318] alloc_skb_with_frags (./include/linux/skbuff.h:1383 net/core/skbuff.c:6763)
[ 238.077178][ T318] sock_alloc_send_pskb (net/core/sock.c:2997)
[ 238.077520][ T318] packet_sendmsg (net/packet/af_packet.c:2926 net/packet/af_packet.c:3019 net/packet/af_packet.c:3108)
[ 238.081469][ T318]
[ 238.081870][ T318] Freed by task 299 on cpu 1 at 238.028496s:
[ 238.082761][ T318] kasan_save_stack (mm/kasan/common.c:58)
[ 238.083481][ T318] kasan_save_track (mm/kasan/common.c:64 (discriminator 5) mm/kasan/common.c:79 (discriminator 5))
[ 238.085348][ T318] kasan_save_free_info (mm/kasan/generic.c:587 (discriminator 1))
[ 238.085900][ T318] __kasan_slab_free (mm/kasan/common.c:287)
[ 238.086439][ T318] kmem_cache_free (mm/slub.c:6168 (discriminator 3) mm/slub.c:6298 (discriminator 3))
[ 238.087007][ T318] skb_release_data (net/core/skbuff.c:1139)
[ 238.087491][ T318] consume_skb (net/core/skbuff.c:1451)
[ 238.087757][ T318] teql_master_xmit (net/sched/sch_teql.c:358)
[ 238.088116][ T318] dev_hard_start_xmit (./include/linux/netdevice.h:5324 ./include/linux/netdevice.h:5333 net/core/dev.c:3871 net/core/dev.c:3887)
[ 238.088468][ T318] sch_direct_xmit (net/sched/sch_generic.c:347)
[ 238.088820][ T318] __qdisc_run (net/sched/sch_generic.c:420 (discriminator 1))
[ 238.089166][ T318] __dev_queue_xmit (./include/net/sch_generic.h:229 ./include/net/pkt_sched.h:121 ./include/net/pkt_sched.h:117 net/core/dev.c:4196 net/core/dev.c:4802)
Workflow to reproduce:
1. Initialize a TEQL topology (dummy0 and ifb0 as slaves, teql0 up).
2. Start multiple sender workers continuously transmitting packets
through teql0 to drive teql_master_xmit().
3. In parallel, repeatedly delete and re-add the root qdisc on
dummy0 and ifb0 via RTNETLINK, forcing frequent teardown and reset activity
(teql_destroy() / qdisc_reset()).
4. After running both workloads concurrently for several iterations,
KASAN reports slab-use-after-free or double-free in the skb free path.
Fix this by moving dev_reset_queue to sch_generic.h and calling it, instead
of qdisc_reset, in teql_destroy since it handles both the lock and lockless
cases correctly for root qdiscs.
Fixes: 96009c7d500e ("sched: replace __QDISC_STATE_RUNNING bit with a spin lock")
Reported-by: Xianrui Dong <keenanat2000@gmail.com>
Tested-by: Xianrui Dong <keenanat2000@gmail.com>
Co-developed-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260315155422.147256-1-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Syzkaller reported a panic in smc_tcp_syn_recv_sock() [1].
smc_tcp_syn_recv_sock() is called in the TCP receive path
(softirq) via icsk_af_ops->syn_recv_sock on the clcsock (TCP
listening socket). It reads sk_user_data to get the smc_sock
pointer. However, when the SMC listen socket is being closed
concurrently, smc_close_active() sets clcsock->sk_user_data
to NULL under sk_callback_lock, and then the smc_sock itself
can be freed via sock_put() in smc_release().
This leads to two issues:
1) NULL pointer dereference: sk_user_data is NULL when
accessed.
2) Use-after-free: sk_user_data is read as non-NULL, but the
smc_sock is freed before its fields (e.g., queued_smc_hs,
ori_af_ops) are accessed.
The race window looks like this (the syzkaller crash [1]
triggers via the SYN cookie path: tcp_get_cookie_sock() ->
smc_tcp_syn_recv_sock(), but the normal tcp_check_req() path
has the same race):
CPU A (softirq) CPU B (process ctx)
tcp_v4_rcv()
TCP_NEW_SYN_RECV:
sk = req->rsk_listener
sock_hold(sk)
/* No lock on listener */
smc_close_active():
write_lock_bh(cb_lock)
sk_user_data = NULL
write_unlock_bh(cb_lock)
...
smc_clcsock_release()
sock_put(smc->sk) x2
-> smc_sock freed!
tcp_check_req()
smc_tcp_syn_recv_sock():
smc = user_data(sk)
-> NULL or dangling
smc->queued_smc_hs
-> crash!
Note that the clcsock and smc_sock are two independent objects
with separate refcounts. TCP stack holds a reference on the
clcsock, which keeps it alive, but this does NOT prevent the
smc_sock from being freed.
Fix this by using RCU and refcount_inc_not_zero() to safely
access smc_sock. Since smc_tcp_syn_recv_sock() is called in
the TCP three-way handshake path, taking read_lock_bh on
sk_callback_lock is too heavy and would not survive a SYN
flood attack. Using rcu_read_lock() is much more lightweight.
- Set SOCK_RCU_FREE on the SMC listen socket so that
smc_sock freeing is deferred until after the RCU grace
period. This guarantees the memory is still valid when
accessed inside rcu_read_lock().
- Use rcu_read_lock() to protect reading sk_user_data.
- Use refcount_inc_not_zero(&smc->sk.sk_refcnt) to pin the
smc_sock. If the refcount has already reached zero (close
path completed), it returns false and we bail out safely.
Note: smc_hs_congested() has a similar lockless read of
sk_user_data without rcu_read_lock(), but it only checks for
NULL and accesses the global smc_hs_wq, never dereferencing
any smc_sock field, so it is not affected.
Reproducer was verified with mdelay injection and smc_run,
the issue no longer occurs with this patch applied.
[1] https://syzkaller.appspot.com/bug?extid=827ae2bfb3a3529333e9
Fixes: 8270d9c21041 ("net/smc: Limit backlog connections")
Reported-by: syzbot+827ae2bfb3a3529333e9@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/67eaf9b8.050a0220.3c3d88.004a.GAE@google.com/T/
Suggested-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Link: https://patch.msgid.link/20260312092909.48325-1-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bond_header_parse() can loop if a stack of two bonding devices is setup,
because skb->dev always points to the hierarchy top.
Add new "const struct net_device *dev" parameter to
(struct header_ops)->parse() method to make sure the recursion
is bounded, and that the final leaf parse method is called.
Fixes: 950803f72547 ("bonding: fix type confusion in bond_setup_by_slave()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Tested-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Cc: Jay Vosburgh <jv@jvosburgh.net>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Link: https://patch.msgid.link/20260315104152.1436867-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For file-backed mount, IO requests are handled by vfs_iocb_iter_read().
However, it can be interrupted by SIGKILL, returning the number of
bytes actually copied. Unused folios in bio are unexpectedly marked
as uptodate.
vfs_read
filemap_read
filemap_get_pages
filemap_readahead
erofs_fileio_readahead
erofs_fileio_rq_submit
vfs_iocb_iter_read
filemap_read
filemap_get_pages <= detect signal
erofs_fileio_ki_complete <= set all folios uptodate
This patch addresses this by setting short read bio with an error
directly.
Fixes: bc804a8d7e86 ("erofs: handle end of filesystem properly for file-backed mounts")
Reported-by: chenguanyou <chenguanyou@xiaomi.com>
Signed-off-by: Yunlei He <heyunlei@xiaomi.com>
Signed-off-by: Sheng Yong <shengyong1@xiaomi.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
The file contains a spelling error in a source comment (resposne).
Typos in comments reduce readability and make text searches less reliable
for developers and maintainers.
Replace 'resposne' with 'response' in the affected comment. This is a
comment-only cleanup and does not change behavior.
[v2: Removed Fixes: and Cc: to stable tags.]
Signed-off-by: Joseph Salisbury <joseph.salisbury@oracle.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Check the global CXL_HDM_DECODER_ENABLE bit instead of looping over
per-decoder COMMITTED bits to determine whether to fall back to DVSEC
range emulation. When the HDM decoder capability is globally enabled,
ignore DVSEC range registers regardless of individual decoder commit
state.
should_emulate_decoders() currently loops over per-decoder COMMITTED
bits, which leads to an incorrect DVSEC fallback when those bits are
zero. One way to trigger this is to destroy a region and bounce the
memdev:
cxl disable-region region0
cxl destroy-region region0
cxl disable-memdev mem0
cxl enable-memdev mem0
Region teardown zeroes the HDM decoder registers including the committed
bits. The subsequent memdev re-probe finds uncommitted decoders and falls
back to DVSEC emulation, even though HDM remains globally enabled.
Observed failures:
should_emulate_decoders: cxl_port endpoint6: decoder6.0: committed: 0 base: 0x0_00000000 size: 0x0_00000000
devm_cxl_setup_hdm: cxl_port endpoint6: Fallback map 1 range register
..
devm_cxl_add_region: cxl_acpi ACPI0017:00: decoder0.0: created region0
__construct_region: cxl_pci 0000:e1:00.0: mem1:decoder6.0:
__construct_region region0 res: [mem 0x850000000-0x284fffffff flags 0x200] iw: 1 ig: 4096
cxl region0: pci0000:e0:port1 cxl_port_setup_targets expected iw: 1 ig: 4096 ..
cxl region0: pci0000:e0:port1 cxl_port_setup_targets got iw: 1 ig: 256 state: disabled ..
cxl_port endpoint6: failed to attach decoder6.0 to region0: -6
..
devm_cxl_add_region: cxl_acpi ACPI0017:00: decoder0.0: created region4
alloc_hpa: cxl region4: HPA allocation error (-34) ..
Fixes: 52cc48ad2a76 ("cxl/hdm: Limit emulation to the number of range registers")
Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20260316201950.224567-1-Smita.KoralahalliChannabasappa@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
With Clang, there can be a conditional forward jump between the load of
the jump table address and the indirect branch.
Fixes the following warning:
vmlinux.o: warning: objtool: ___bpf_prog_run+0x1c5: sibling call from callable instruction with modified stack frame
Reported-by: Arnd Bergmann <arnd@arndb.de>
Closes: https://lore.kernel.org/a426d669-58bb-4be1-9eaa-6f3d83109e2d@app.fastmail.com
Link: https://patch.msgid.link/7d8600caed08901b6679767488acd639f6df9688.1773071992.git.jpoimboe@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
