| Age | Commit message (Collapse) | Author |
|---|
|
commit 8168a7b72bdee3790b126f63bd30306759206b15 upstream.
When SEV is disabled, the HV-Fixed page allocation call fails, which in
turn causes SFS initialization to fail.
Fix the HV-Fixed API so callers (for example, SFS) can use it even when
SEV is disabled by performing normal page allocation and freeing.
Fixes: e09701dcdd9c ("crypto: ccp - Add new HV-Fixed page allocation/free API")
Cc: stable@vger.kernel.org
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6e3f4514e3b432871ac81717d24f56b441857f77 upstream.
Fix a nasty copy and paste bug, where the incorrect boolean return type of
the ttm_pool_beneficial_order() helper had a consequence of avoiding
direct reclaim too eagerly for drivers which use this feature (currently
amdgpu).
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Fixes: 7e9c548d3709 ("drm/ttm: Allow drivers to specify maximum beneficial TTM pool size")
Cc: Christian König <christian.koenig@amd.com>
Cc: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.19+
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20260227124901.3177-1-tvrtko.ursulin@igalia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 550bae2c0931dbb664a61b08c21cf156f0a5362a upstream.
bcm2835_reset_status() has a misplaced parenthesis on every PM_READ()
call. Since PM_READ(reg) expands to readl(power->base + (reg)), the
expression:
PM_READ(PM_GRAFX & PM_V3DRSTN)
computes the bitwise AND of the register offset PM_GRAFX with the
bitmask PM_V3DRSTN before using the result as a register offset, reading
from the wrong MMIO address instead of the intended PM_GRAFX register.
The same issue affects the PM_IMAGE cases.
Fix by moving the closing parenthesis so PM_READ() receives only the
register offset, and the bitmask is applied to the value returned by
the read.
Fixes: 670c672608a1 ("soc: bcm: bcm2835-pm: Add support for power domains under a new binding.")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2d85ecd6fb0eb2fee0ffa040ec1ddea57b09bc38 upstream.
The datasheet specifies, that the IRQ_B pin is pulled low when any
unmasked interrupt bit status is changed, and it is released high once
the application processor reads the INT1 register. As it specifies a
level-low behavior, it should not force a falling-edge interrupt.
Remove the IRQF_TRIGGER_FALLING to not force the falling-edge interrupt
and instead rely on the flag from the device tree.
Fixes: 0959b6706325 ("regulator: pf9453: add PMIC PF9453 support")
Cc: stable@vger.kernel.org
Signed-off-by: Franz Schnyder <franz.schnyder@toradex.com>
Link: https://patch.msgid.link/20260218102518.238943-2-fra.schnyder@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c36e28becd0586ac98318fd335e5e91d19cd2623 upstream.
IORING_SEND_VECTORIZED with registered buffers is not implemented but
could be. Don't silently ignore the flag in this case but reject it with
an error. It only affects sendzc as normal sends don't support
registered buffers.
Fixes: 6f02527729bd3 ("io_uring/net: Allow to do vectorized send")
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 17c144f1104bfc29a3ce3f7d0931a1bfb7a3558c upstream.
The check if the initial mapping is sufficient needs to happen much
earlier during bootup. Move this test directly to the start_parisc()
function and use native PDC iodc functions to print the warning, because
panic() and printk() are not functional yet.
This fixes boot when enabling various KALLSYSMS options which need
much more space.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v6.0+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 97c5550b763171dbef61e6239cab372b9f9cd4a2 upstream.
contpte_ptep_set_access_flags() compared the gathered ptep_get() value
against the requested entry to detect no-ops. ptep_get() ORs AF/dirty
from all sub-PTEs in the CONT block, so a dirty sibling can make the
target appear already-dirty. When the gathered value matches entry, the
function returns 0 even though the target sub-PTE still has PTE_RDONLY
set in hardware.
For a CPU with FEAT_HAFDBS this gathered view is fine, since hardware may
set AF/dirty on any sub-PTE and CPU TLB behavior is effectively gathered
across the CONT range. But page-table walkers that evaluate each
descriptor individually (e.g. a CPU without DBM support, or an SMMU
without HTTU, or with HA/HD disabled in CD.TCR) can keep faulting on the
unchanged target sub-PTE, causing an infinite fault loop.
Gathering can therefore cause false no-ops when only a sibling has been
updated:
- write faults: target still has PTE_RDONLY (needs PTE_RDONLY cleared)
- read faults: target still lacks PTE_AF
Fix by checking each sub-PTE against the requested AF/dirty/write state
(the same bits consumed by __ptep_set_access_flags()), using raw
per-PTE values rather than the gathered ptep_get() view, before
returning no-op. Keep using the raw target PTE for the write-bit unfold
decision.
Per Arm ARM (DDI 0487) D8.7.1 ("The Contiguous bit"), any sub-PTE in a CONT
range may become the effective cached translation and software must
maintain consistent attributes across the range.
Fixes: 4602e5757bcc ("arm64/mm: wire up PTE_CONT for user mappings")
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Breno Leitao <leitao@debian.org>
Cc: stable@vger.kernel.org
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: James Houghton <jthoughton@google.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Piotr Jaroszynski <pjaroszynski@nvidia.com>
Acked-by: Balbir Singh <balbirs@nvidia.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8475d8fe21ec9c7eb2faca555fbc5b68cf0d2597 upstream.
The KERNEL_INITIAL_ORDER value defines the initial size (usually 32 or
64 MB) of the page table during bootup. Up until now the whole area was
initialized with PTE entries, but there was no check if we filled too
many entries. Change the code to fill up with so many entries that the
"_end" symbol can be reached by the kernel, but not more entries than
actually fit into the initial PTE tables.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v6.0+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 531bb98a030cc1073bd7ed9a502c0a3a781e92ee upstream.
Refill queue entries are shared with the user space, use READ_ONCE when
reading them.
Fixes: 34a3e60821ab9 ("io_uring/zcrx: implement zerocopy receive pp memory provider");
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 25dd70a03b1f5f3aa71e1a5091ecd9cd2a13ee43 upstream.
The q54sj108a2_debugfs_read function suffers from a stack buffer overflow
due to incorrect arguments passed to bin2hex(). The function currently
passes 'data' as the destination and 'data_char' as the source.
Because bin2hex() converts each input byte into two hex characters, a
32-byte block read results in 64 bytes of output. Since 'data' is only
34 bytes (I2C_SMBUS_BLOCK_MAX + 2), this writes 30 bytes past the end
of the buffer onto the stack.
Additionally, the arguments were swapped: it was reading from the
zero-initialized 'data_char' and writing to 'data', resulting in
all-zero output regardless of the actual I2C read.
Fix this by:
1. Expanding 'data_char' to 66 bytes to safely hold the hex output.
2. Correcting the bin2hex() argument order and using the actual read count.
3. Using a pointer to select the correct output buffer for the final
simple_read_from_buffer call.
Fixes: d014538aa385 ("hwmon: (pmbus) Driver for Delta power supplies Q54SJ108A2")
Cc: stable@vger.kernel.org
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Link: https://lore.kernel.org/r/20260304235116.1045-1-sanman.p211993@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c25c4aa3f79a488cc270507935a29c07dc6bddfc upstream.
Commit 143937ca51cc ("arm64, mm: avoid always making PTE dirty in
pte_mkwrite()") changed pte_mkwrite_novma() to only clear PTE_RDONLY
when PTE_DIRTY is set. This was to allow writable-clean PTEs for swap
pages that haven't actually been written.
However, this broke kexec and hibernation for some platforms. Both go
through trans_pgd_create_copy() -> _copy_pte(), which calls
pte_mkwrite_novma() to make the temporary linear-map copy fully
writable. With the updated pte_mkwrite_novma(), read-only kernel pages
(without PTE_DIRTY) remain read-only in the temporary mapping.
While such behaviour is fine for user pages where hardware DBM or
trapping will make them writeable, subsequent in-kernel writes by the
kexec relocation code will fault.
Add PTE_DIRTY back to all _PAGE_KERNEL* protection definitions. This was
the case prior to 5.4, commit aa57157be69f ("arm64: Ensure
VM_WRITE|VM_SHARED ptes are clean by default"). With the kernel
linear-map PTEs always having PTE_DIRTY set, pte_mkwrite_novma()
correctly clears PTE_RDONLY.
Fixes: 143937ca51cc ("arm64, mm: avoid always making PTE dirty in pte_mkwrite()")
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: stable@vger.kernel.org
Reported-by: Jianpeng Chang <jianpeng.chang.cn@windriver.com>
Link: https://lore.kernel.org/r/20251204062722.3367201-1-jianpeng.chang.cn@windriver.com
Cc: Will Deacon <will@kernel.org>
Cc: Huang, Ying <ying.huang@linux.alibaba.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Huang Ying <ying.huang@linux.alibaba.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8f3c6f08ababad2e3bdd239728cf66a9949446b4 upstream.
If we have runtime suspended, and userspace wants to use /dev/drm_dp_*
then just tell it the device is busy instead of crashing in the GSP
code.
WARNING: CPU: 2 PID: 565741 at drivers/gpu/drm/nouveau/nvkm/subdev/gsp/rm/r535/rpc.c:164 r535_gsp_msgq_wait+0x9a/0xb0 [nouveau]
CPU: 2 UID: 0 PID: 565741 Comm: fwupd Not tainted 6.18.10-200.fc43.x86_64 #1 PREEMPT(lazy)
Hardware name: LENOVO 20QTS0PQ00/20QTS0PQ00, BIOS N2OET65W (1.52 ) 08/05/2024
RIP: 0010:r535_gsp_msgq_wait+0x9a/0xb0 [nouveau]
This is a simple fix to get backported. We should probably engineer a
proper power domain solution to wake up devices and keep them awake
while fw updates are happening.
Cc: stable@vger.kernel.org
Fixes: 8894f4919bc4 ("drm/nouveau: register a drm_dp_aux channel for each dp connector")
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260224031750.791621-1-airlied@gmail.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8e732934fb81282be41602550e7e07baf265e972 upstream.
The 32MB initial kernel mapping can become too small when CONFIG_KALLSYMS
is used. Increase the mapping to 64 MB in this case.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v6.0+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0fb59eaca18f1254ecdce34354eec3cb1b3b5e10 upstream.
>From the RK3588 TRM Table 7-1 RK3588 Voltage Domain and Power Domain Summary,
PD_RKVDEC0/1 and PD_VENC0/1 rely on VD_VCODEC which require extra voltages to
be applied, otherwise it breaks RK3588-evb1-v10 board after vdec support landed[1].
The panic looks like below:
rockchip-pm-domain fd8d8000.power-management:power-controller: failed to set domain 'rkvdec0' on, val=0
rockchip-pm-domain fd8d8000.power-management:power-controller: failed to set domain 'rkvdec1' on, val=0
...
Hardware name: Rockchip RK3588S EVB1 V10 Board (DT)
Workqueue: pm genpd_power_off_work_fn
Call trace:
show_stack+0x18/0x24 (C)
dump_stack_lvl+0x40/0x84
dump_stack+0x18/0x24
vpanic+0x1ec/0x4fc
vpanic+0x0/0x4fc
check_panic_on_warn+0x0/0x94
arm64_serror_panic+0x6c/0x78
do_serror+0xc4/0xcc
el1h_64_error_handler+0x3c/0x5c
el1h_64_error+0x6c/0x70
regmap_mmio_read32le+0x18/0x24 (P)
regmap_bus_reg_read+0xfc/0x130
regmap_read+0x188/0x1ac
regmap_read+0x54/0x78
rockchip_pd_power+0xcc/0x5f0
rockchip_pd_power_off+0x1c/0x4c
genpd_power_off+0x84/0x120
genpd_power_off+0x1b4/0x260
genpd_power_off_work_fn+0x38/0x58
process_scheduled_works+0x194/0x2c4
worker_thread+0x2ac/0x3d8
kthread+0x104/0x124
ret_from_fork+0x10/0x20
SMP: stopping secondary CPUs
Kernel Offset: disabled
CPU features: 0x3000000,000e0005,40230521,0400720b
Memory Limit: none
---[ end Kernel panic - not syncing: Asynchronous SError Interrupt ]---
Chaoyi pointed out the PD_VCODEC is the parent of PD_RKVDEC0/1 and PD_VENC0/1, so checking
the PD_VCODEC is enough.
[1] https://lore.kernel.org/linux-rockchip/20251020212009.8852-2-detlev.casanova@collabora.com/
Fixes: db6df2e3fc16 ("pmdomain: rockchip: add regulator support")
Cc: stable@vger.kernel.org
Suggested-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 89865e6dc8487b627302bdced3f965cd0c406835 upstream.
Wa_16025250150 asks us to set five register fields of the register to
0x1 each. However we were just OR'ing this into the existing register
value (which has a default of 0x4 for each nibble-sized field) resulting
in final field values of 0x5 instead of the desired 0x1. Correct the
RTP programming (use FIELD_SET instead of SET) to ensure each field is
assigned to exactly the value we want.
Cc: Aradhya Bhatia <aradhya.bhatia@intel.com>
Cc: Tejas Upadhyay <tejas.upadhyay@intel.com>
Cc: stable@vger.kernel.org # v6.16+
Fixes: 7654d51f1fd8 ("drm/xe/xe2hpg: Add Wa_16025250150")
Reviewed-by: Ngai-Mint Kwan <ngai-mint.kwan@linux.intel.com>
Link: https://patch.msgid.link/20260227164341.3600098-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit d139209ef88e48af1f6731cd45440421c757b6b5)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cfc83a3c71517b59c1047db57da31e26a9dc2f33 upstream.
batadv_v_elp_get_throughput() might be called when the RTNL lock is already
held. This could be problematic when the work queue item is cancelled via
cancel_delayed_work_sync() in batadv_v_elp_iface_disable(). In this case,
an rtnl_lock() would cause a deadlock.
To avoid this, rtnl_trylock() was used in this function to skip the
retrieval of the ethtool information in case the RTNL lock was already
held.
But for cfg80211 interfaces, batadv_get_real_netdev() was called - which
also uses rtnl_lock(). The approach for __ethtool_get_link_ksettings() must
also be used instead and the lockless version __batadv_get_real_netdev()
has to be called.
Cc: stable@vger.kernel.org
Fixes: 8c8ecc98f5c6 ("batman-adv: Drop unmanaged ELP metric worker")
Reported-by: Christian Schmidbauer <github@grische.xyz>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Tested-by: Sören Skaarup <freifunk_nordm4nn@gmx.de>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 46d0d6f50dab706637f4c18a470aac20a21900d3 upstream.
To prevent timing attacks, MACs need to be compared in constant
time. Use the appropriate helper function for this.
Fixes: cfb6eeb4c860 ("[TCP]: MD5 Signature Option (RFC2385) support.")
Fixes: 658ddaaf6694 ("tcp: md5: RST: getting md5 key from listener")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20260302203409.13388-1-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b96d0c59cdbb2a22b2545f6f3d5c6276b05761dd upstream.
trace_graph_thresh_return() called handle_nosleeptime() and then delegated
to trace_graph_return(), which calls handle_nosleeptime() again. When
sleep-time accounting is disabled this double-adjusts calltime and can
produce bogus durations (including underflow).
Fix this by computing rettime once, applying handle_nosleeptime() only
once, using the adjusted calltime for threshold comparison, and writing
the return event directly via __trace_graph_return() when the threshold is
met.
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260221113314048jE4VRwIyZEALiYByGK0My@zte.com.cn
Fixes: 3c9880f3ab52b ("ftrace: Use a running sleeptime instead of saving on shadow stack")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shengming Hu <hu.shengming@zte.com.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 67edfec516d30d3e62925c397be4a1e5185802fc upstream.
To prevent timing attacks, MACs need to be compared in constant
time. Use the appropriate helper function for this.
Fixes: 0a3a809089eb ("net/tcp: Verify inbound TCP-AO signed segments")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20260302203600.13561-1-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0a663b764dbdf135a126284f454c9f01f95a87d4 upstream.
When multiple syscall events are specified in the kernel command line
(e.g., trace_event=syscalls:sys_enter_openat,syscalls:sys_enter_close),
they are often not captured after boot, even though they appear enabled
in the tracing/set_event file.
The issue stems from how syscall events are initialized. Syscall
tracepoints require the global reference count (sys_tracepoint_refcount)
to transition from 0 to 1 to trigger the registration of the syscall
work (TIF_SYSCALL_TRACEPOINT) for tasks, including the init process (pid 1).
The current implementation of early_enable_events() with disable_first=true
used an interleaved sequence of "Disable A -> Enable A -> Disable B -> Enable B".
If multiple syscalls are enabled, the refcount never drops to zero,
preventing the 0->1 transition that triggers actual registration.
Fix this by splitting early_enable_events() into two distinct phases:
1. Disable all events specified in the buffer.
2. Enable all events specified in the buffer.
This ensures the refcount hits zero before re-enabling, allowing syscall
events to be properly activated during early boot.
The code is also refactored to use a helper function to avoid logic
duplication between the disable and enable phases.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260224023544.1250787-1-hehuiwen@kylinos.cn
Fixes: ce1039bd3a89 ("tracing: Fix enabling of syscall events on the command line")
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6ca8379b5d36e22b04e6315c3e49a6083377c862 upstream.
When tracing_thresh is enabled, function graph tracing uses
trace_graph_thresh_return() as the return handler. Unlike
trace_graph_return(), it did not clear the per-task TRACE_GRAPH_NOTRACE
flag set by the entry handler for set_graph_notrace addresses. This could
leave the task permanently in "notrace" state and effectively disable
function graph tracing for that task.
Mirror trace_graph_return()'s per-task notrace handling by clearing
TRACE_GRAPH_NOTRACE and returning early when set.
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260221113007819YgrZsMGABff4Rc-O_fZxL@zte.com.cn
Fixes: b84214890a9bc ("function_graph: Move graph notrace bit to shadow stack global var")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shengming Hu <hu.shengming@zte.com.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fb4903b3354aed4a2301180cf991226f896c87ed upstream.
Executing ethtool -m can fail reporting a netlink I/O error while firmware
link management holds the i2c bus used to communicate with the module.
According to Intel(R) Ethernet Controller E810 Datasheet Rev 2.8 [1]
Section 3.3.10.4 Read/Write SFF EEPROM (0x06EE)
request should to be retried upon receiving EBUSY from firmware.
Commit e9c9692c8a81 ("ice: Reimplement module reads used by ethtool")
implemented it only for part of ice_get_module_eeprom(), leaving all other
calls to ice_aq_sff_eeprom() vulnerable to returning early on getting
EBUSY without retrying.
Remove the retry loop from ice_get_module_eeprom() and add Admin Queue
(AQ) command with opcode 0x06EE to the list of commands that should be
retried on receiving EBUSY from firmware.
Cc: stable@vger.kernel.org
Fixes: e9c9692c8a81 ("ice: Reimplement module reads used by ethtool")
Signed-off-by: Jakub Staniszewski <jakub.staniszewski@linux.intel.com>
Co-developed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Signed-off-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://www.intel.com/content/www/us/en/content-details/613875/intel-ethernet-controller-e810-datasheet.html [1]
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1a86a1f7d88996085934139fa4c063b6299a2dd3 upstream.
I was debugging a NIC driver when I noticed that when I enable
threaded busypoll, bpftrace hangs when starting up. dmesg showed:
rcu_tasks_wait_gp: rcu_tasks grace period number 85 (since boot) is 10658 jiffies old.
rcu_tasks_wait_gp: rcu_tasks grace period number 85 (since boot) is 40793 jiffies old.
rcu_tasks_wait_gp: rcu_tasks grace period number 85 (since boot) is 131273 jiffies old.
rcu_tasks_wait_gp: rcu_tasks grace period number 85 (since boot) is 402058 jiffies old.
INFO: rcu_tasks detected stalls on tasks:
00000000769f52cd: .N nvcsw: 2/2 holdout: 1 idle_cpu: -1/64
task:napi/eth2-8265 state:R running task stack:0 pid:48300 tgid:48300 ppid:2 task_flags:0x208040 flags:0x00004000
Call Trace:
<TASK>
? napi_threaded_poll_loop+0x27c/0x2c0
? __pfx_napi_threaded_poll+0x10/0x10
? napi_threaded_poll+0x26/0x80
? kthread+0xfa/0x240
? __pfx_kthread+0x10/0x10
? ret_from_fork+0x31/0x50
? __pfx_kthread+0x10/0x10
? ret_from_fork_asm+0x1a/0x30
</TASK>
The cause is that in threaded busypoll, the main loop is in
napi_threaded_poll rather than napi_threaded_poll_loop, where the
latter rarely iterates more than once within its loop. For
rcu_softirq_qs_periodic inside napi_threaded_poll_loop to report its
qs state, the last_qs must be 100ms behind, and this can't happen
because napi_threaded_poll_loop rarely iterates in threaded busypoll,
and each time napi_threaded_poll_loop is called last_qs is reset to
latest jiffies.
This patch changes so that in threaded busypoll, last_qs is saved
in the outer napi_threaded_poll, and whether busy_poll_last_qs
is NULL indicates whether napi_threaded_poll_loop is called for
busypoll. This way last_qs would not reset to latest jiffies on
each invocation of napi_threaded_poll_loop.
Fixes: c18d4b190a46 ("net: Extend NAPI threaded polling to allow kthread based busy polling")
Cc: stable@vger.kernel.org
Signed-off-by: YiFei Zhu <zhuyifei@google.com>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Link: https://patch.msgid.link/20260227221937.1060857-1-zhuyifei@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit dabffd08545ffa1d7183bc45e387860984025291 upstream.
MANA hardware requires at least one doorbell ring every 8 wraparounds
of the CQ. The driver rings the doorbell as a form of flow control to
inform hardware that CQEs have been consumed.
The NAPI poll functions mana_poll_tx_cq() and mana_poll_rx_cq() can
poll up to CQE_POLLING_BUFFER (512) completions per call. If the CQ
has fewer than 512 entries, a single poll call can process more than
4 wraparounds without ringing the doorbell. The doorbell threshold
check also uses ">" instead of ">=", delaying the ring by one extra
CQE beyond 4 wraparounds. Combined, these issues can cause the driver
to exceed the 8-wraparound hardware limit, leading to missed
completions and stalled queues.
Fix this by capping the number of CQEs polled per call to 4 wraparounds
of the CQ in both TX and RX paths. Also change the doorbell threshold
from ">" to ">=" so the doorbell is rung as soon as 4 wraparounds are
reached.
Cc: stable@vger.kernel.org
Fixes: 58a63729c957 ("net: mana: Fix doorbell out of order violation and avoid unnecessary doorbell rings")
Signed-off-by: Long Li <longli@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260226192833.1050807-1-longli@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 24d87712727a5017ad142d63940589a36cd25647 upstream.
The ule_mandatory_ext_handlers[] and ule_optional_ext_handlers[] tables
in handle_one_ule_extension() are declared with 255 elements (valid
indices 0-254), but the index htype is derived from network-controlled
data as (ule_sndu_type & 0x00FF), giving a range of 0-255. When
htype equals 255, an out-of-bounds read occurs on the function pointer
table, and the OOB value may be called as a function pointer.
Add a bounds check on htype against the array size before either table
is accessed. Out-of-range values now cause the SNDU to be discarded.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Ariel Silver <arielsilver77@gmail.com>
Signed-off-by: Ariel Silver <arielsilver77@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4c7b2ec23cc5d880e3ffe35e8c2aad686b67723a upstream.
Now that we changed permission checking make sure that we reflect that
in the selftests.
Link: https://patch.msgid.link/20260226-work-visibility-fixes-v1-4-d2c2853313bd@kernel.org
Fixes: 9d87b1067382 ("selftests: add tests for mntns iteration")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Cc: stable@kernel.org # v6.14+
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b6c3af46c26f2d07c10a1452adc34b821719327e upstream.
When code had been changed to use for_each_set_clump8(), it mistakenly
switched from chip->nport to chip->tpin since the cy8c9540 and cy8c9560
have a 4-pin gap. This, in particular, led to the missed read of
the last bank interrupt status register and hence missing interrupts
on those pins. Restore the upper limit in for_each_set_clump8() to take
into consideration that gap.
Fixes: 83e29a7a1fdf ("pinctrl: cy8c95x0; Switch to use for_each_set_clump8()")
Cc: stable@vger.kernel.org
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a75281626fc8fa6dc6c9cc314ee423e8bc45203b upstream.
The current code checks 'i + 5 < in_len' at the end of the if statement.
However, it accesses 'in_ie[i + 5]' before that check, which can lead
to an out-of-bounds read. Move the length check to the beginning of the
conditional to ensure the index is within bounds before accessing the
array.
Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Luka Gejak <luka.gejak@linux.dev>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/20260224132647.11642-2-luka.gejak@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f0109b9d3e1e455429279d602f6276e34689750a upstream.
Just like in commit 154828bf9559 ("staging: rtl8723bs: fix out-of-bounds
read in rtw_get_ie() parser"), we don't trust the data in the frame so
we should check the length better before acting on it
Cc: stable <stable@kernel.org>
Assisted-by: gkh_clanker_2000
Tested-by: Navaneeth K <knavaneeth786@gmail.com>
Reviewed-by: Navaneeth K <knavaneeth786@gmail.com>
Link: https://patch.msgid.link/2026022336-arrange-footwork-6e54@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8225489ddb900656cc21573b4e1b00c9181fd777 upstream.
hw_sm750_map() calls pci_request_region() but never releases the
region on error paths or in lynxfb_pci_remove(). This causes a
resource leak that prevents the PCI region from being mapped again
after driver removal or a failed probe. A TODO comment in the code
acknowledges this missing cleanup.
Restructure the error handling in hw_sm750_map() to properly release
the PCI region on ioremap failures, and add pci_release_region() to
lynxfb_pci_remove().
Signed-off-by: Artem Lytkin <iprintercanon@gmail.com>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/20260216202038.1828-1-iprintercanon@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8dafa9f5900c4855a65dbfee51e3bd00636deee1 upstream.
obj_exts_alloc_size() prevents recursive allocation of slabobj_ext
array from the same cache, to avoid creating slabs that are never freed.
There is one mistake that returns the original size when memory
allocation profiling is disabled. The assumption was that
memcg-triggered slabobj_ext allocation is always served from
KMALLOC_CGROUP type. But this is wrong [1]: when the caller specifies
both __GFP_RECLAIMABLE and __GFP_ACCOUNT with SLUB_TINY enabled, the
allocation is served from normal kmalloc. This is because kmalloc_type()
prioritizes __GFP_RECLAIMABLE over __GFP_ACCOUNT, and SLUB_TINY aliases
KMALLOC_RECLAIM with KMALLOC_NORMAL.
As a result, the recursion guard is bypassed and the problematic slabs
can be created. Fix this by removing the mem_alloc_profiling_enabled()
check entirely. The remaining is_kmalloc_normal() check is still
sufficient to detect whether the cache is of KMALLOC_NORMAL type and
avoid bumping the size if it's not.
Without SLUB_TINY, no functional change intended.
With SLUB_TINY, allocations with __GFP_ACCOUNT|__GFP_RECLAIMABLE
now allocate a larger array if the sizes equal.
Reported-by: Zw Tang <shicenci@gmail.com>
Fixes: 280ea9c3154b ("mm/slab: avoid allocating slabobj_ext array from its own slab")
Closes: https://lore.kernel.org/linux-mm/CAPHJ_VKuMKSke8b11AZQw1PTSFN4n2C0gFxC6xGOG0ZLHgPmnA@mail.gmail.com [1]
Cc: stable@vger.kernel.org
Signed-off-by: Harry Yoo <harry.yoo@oracle.com>
Link: https://patch.msgid.link/20260309072219.22653-1-harry.yoo@oracle.com
Tested-by: Zw Tang <shicenci@gmail.com>
Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d210fdcac9c0d1380eab448aebc93f602c1cd4e6 upstream.
damos_walk() sets ctx->walk_control to the caller-provided control
structure before checking whether the context is running. If the context
is inactive (damon_is_running() returns false), the function returns
-EINVAL without clearing ctx->walk_control. This leaves a dangling
pointer to a stack-allocated structure that will be freed when the caller
returns.
This is structurally identical to the bug fixed in commit f9132fbc2e83
("mm/damon/core: remove call_control in inactive contexts") for
damon_call(), which had the same pattern of linking a control object and
returning an error without unlinking it.
The dangling walk_control pointer can cause:
1. Use-after-free if the context is later started and kdamond
dereferences ctx->walk_control (e.g., in damos_walk_cancel()
which writes to control->canceled and calls complete())
2. Permanent -EBUSY from subsequent damos_walk() calls, since the
stale pointer is non-NULL
Nonetheless, the real user impact is quite restrictive. The
use-after-free is impossible because there is no damos_walk() callers who
starts the context later. The permanent -EBUSY can actually confuse
users, as DAMON is not running. But the symptom is kept only while the
context is turned off. Turning it on again will make DAMON internally
uses a newly generated damon_ctx object that doesn't have the invalid
damos_walk_control pointer, so everything will work fine again.
Fix this by clearing ctx->walk_control under walk_control_lock before
returning -EINVAL, mirroring the fix pattern from f9132fbc2e83.
Link: https://lkml.kernel.org/r/20260224011102.56033-1-sj@kernel.org
Fixes: bf0eaba0ff9c ("mm/damon/core: implement damos_walk()")
Reported-by: Raul Pazemecxas De Andrade <raul_pazemecxas@hotmail.com>
Closes: https://lore.kernel.org/CPUPR80MB8171025468965E583EF2490F956CA@CPUPR80MB8171.lamprd80.prod.outlook.com
Signed-off-by: Raul Pazemecxas De Andrade <raul_pazemecxas@hotmail.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [6.14+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 577a1f495fd78d8fb61b67ac3d3b595b01f6fcb0 upstream.
During a pagecache folio split, the values in the related xarray should
not be changed from the original folio at xarray split time until all
after-split folios are well formed and stored in the xarray. Current use
of xas_try_split() in __split_unmapped_folio() lets some after-split
folios show up at wrong indices in the xarray. When these misplaced
after-split folios are unfrozen, before correct folios are stored via
__xa_store(), and grabbed by folio_try_get(), they are returned to
userspace at wrong file indices, causing data corruption. More detailed
explanation is at the bottom.
The reproducer is at: https://github.com/dfinity/thp-madv-remove-test
It
1. creates a memfd,
2. forks,
3. in the child process, maps the file with large folios (via shmem code
path) and reads the mapped file continuously with 16 threads,
4. in the parent process, uses madvise(MADV_REMOVE) to punch poles in the
large folio.
Data corruption can be observed without the fix. Basically, data from a
wrong page->index is returned.
Fix it by using the original folio in xas_try_split() calls, so that
folio_try_get() can get the right after-split folios after the original
folio is unfrozen.
Uniform split, split_huge_page*(), is not affected, since it uses
xas_split_alloc() and xas_split() only once and stores the original folio
in the xarray. Change xas_split() used in uniform split branch to use the
original folio to avoid confusion.
Fixes below points to the commit introduces the code, but folio_split() is
used in a later commit 7460b470a131f ("mm/truncate: use folio_split() in
truncate operation").
More details:
For example, a folio f is split non-uniformly into f, f2, f3, f4 like
below:
+----------------+---------+----+----+
| f | f2 | f3 | f4 |
+----------------+---------+----+----+
but the xarray would look like below after __split_unmapped_folio() is
done:
+----------------+---------+----+----+
| f | f2 | f3 | f3 |
+----------------+---------+----+----+
After __split_unmapped_folio(), the code changes the xarray and unfreezes
after-split folios:
1. unfreezes f2, __xa_store(f2)
2. unfreezes f3, __xa_store(f3)
3. unfreezes f4, __xa_store(f4), which overwrites the second f3 to f4.
4. unfreezes f.
Meanwhile, a parallel filemap_get_entry() can read the second f3 from the
xarray and use folio_try_get() on it at step 2 when f3 is unfrozen. Then,
f3 is wrongly returned to user.
After the fix, the xarray looks like below after __split_unmapped_folio():
+----------------+---------+----+----+
| f | f | f | f |
+----------------+---------+----+----+
so that the race window no longer exists.
[ziy@nvidia.com: move comment, per David]
Link: https://lkml.kernel.org/r/5C9FA053-A4C6-4615-BE05-74E47A6462B3@nvidia.com
Link: https://lkml.kernel.org/r/20260302203159.3208341-1-ziy@nvidia.com
Fixes: 00527733d0dc ("mm/huge_memory: add two new (not yet used) functions for folio_split()")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reported-by: Bas van Dijk <bas@dfinity.org>
Closes: https://lore.kernel.org/all/CAKNNEtw5_kZomhkugedKMPOG-sxs5Q5OLumWJdiWXv+C9Yct0w@mail.gmail.com/
Tested-by: Lance Yang <lance.yang@linux.dev>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nico Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7e04bf1f33151a30e06a65b74b5f2c19fc2be128 upstream.
A dirty folio is one which has been written to. A clean folio is its
opposite. Since a clean folio has no user data, it can be freed under
memory pressure.
memfd preservation with LUO saves the flag at preserve(). This is
problematic. The folio might get dirtied later. Saving it at freeze()
also doesn't work, since the dirty bit from PTE is normally synced at
unmap and there might still be mappings of the file at freeze().
To see why this is a problem, say a folio is clean at preserve, but gets
dirtied later. The serialized state of the folio will mark it as clean.
After retrieve, the next kernel will see the folio as clean and might try
to reclaim it under memory pressure. This will result in losing user
data.
Mark all folios of the file as dirty, and always set the
MEMFD_LUO_FOLIO_DIRTY flag. This comes with the side effect of making all
clean folios un-reclaimable. This is a cost that has to be paid for
participants of live update. It is not expected to be a common use case
to preserve a lot of clean folios anyway.
Since the value of pfolio->flags is a constant now, drop the flags
variable and set it directly.
Link: https://lkml.kernel.org/r/20260223173931.2221759-3-pratyush@kernel.org
Fixes: b3749f174d68 ("mm: memfd_luo: allow preserving memfd")
Signed-off-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 50d7b4332f27762d24641970fc34bb68a2621926 upstream.
Patch series "mm: memfd_luo: fixes for folio flag preservation".
This series contains a couple fixes for flag preservation for memfd live
update.
The first patch fixes memfd preservation when fallocate() was used to
pre-allocate some pages. For these memfds, all the writes to fallocated
pages touched after preserve were lost.
The second patch fixes dirty flag tracking. If the dirty flag is not
tracked correctly, the next kernel might incorrectly reclaim some folios
under memory pressure, losing user data. This is a theoretical bug that I
observed when reading the code, and haven't been able to reproduce it.
This patch (of 2):
When a folio is added to a shmem file via fallocate, it is not zeroed on
allocation. This is done as a performance optimization since it is
possible the folio will never end up being used at all. When the folio is
used, shmem checks for the uptodate flag, and if absent, zeroes the folio
(and sets the flag) before returning to user.
With LUO, the flags of each folio are saved at preserve time. It is
possible to have a memfd with some folios fallocated but not uptodate.
For those, the uptodate flag doesn't get saved. The folios might later
end up being used and become uptodate. They would get passed to the next
kernel via KHO correctly since they did get preserved. But they won't
have the MEMFD_LUO_FOLIO_UPTODATE flag.
This means that when the memfd is retrieved, the folios will be added to
the shmem file without the uptodate flag. They will be zeroed before
first use, losing the data in those folios.
Since we take a big performance hit in allocating, zeroing, and pinning
all folios at prepare time anyway, take some more and zero all
non-uptodate ones too.
Later when there is a stronger need to make prepare faster, this can be
optimized.
To avoid racing with another uptodate operation, take the folio lock.
Link: https://lkml.kernel.org/r/20260223173931.2221759-2-pratyush@kernel.org
Fixes: b3749f174d68 ("mm: memfd_luo: allow preserving memfd")
Signed-off-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit feae40a6a178bb525a15f19288016e5778102a99 upstream.
It may happen that VF spawned for E610 adapter has problem with setting
link up. This happens when ixgbevf supporting mailbox API 1.6 cooperates
with PF driver which doesn't support this version of API, and hence
doesn't support new approach for getting PF link data.
In that case VF asks PF to provide link data but as PF doesn't support
it, returns -EOPNOTSUPP what leads to early bail from link configuration
sequence.
Avoid such situation by using legacy VFLINKS approach whenever negotiated
API version is less than 1.6.
To reproduce the issue just create VF and set its link up - adapter must
be any from the E610 family, ixgbevf must support API 1.6 or higher while
ixgbevf must not.
Fixes: 53f0eb62b4d2 ("ixgbevf: fix getting link speed data for E610 devices")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 201ceb94aa1def0024a7c18ce643e5f65026be06 upstream.
Fix a bug where kunit_run_irq_test() could hang if the system is too
slow. This was noticed with the crypto library tests in certain VMs.
Specifically, if kunit_irq_test_timer_func() and the associated hrtimer
code took over 5us to run, then the CPU would spend all its time
executing that code in hardirq context. As a result, the task executing
kunit_run_irq_test() never had a chance to run, exit the loop, and
cancel the timer.
To fix it, make kunit_irq_test_timer_func() increase the timer interval
when the other contexts aren't having a chance to run.
Fixes: 950a81224e8b ("lib/crypto: tests: Add hash-test-template.h and gen-hash-testvecs.py")
Cc: stable@vger.kernel.org
Reviewed-by: David Gow <david@davidgow.net>
Link: https://lore.kernel.org/r/20260224033751.97615-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 326256c0a72d4877cec1d4df85357da106233128 upstream.
Add retry mechanism for indirect Admin Queue (AQ) commands. To do so we
need to keep the command buffer.
This technically reverts commit 43a630e37e25
("ice: remove unused buffer copy code in ice_sq_send_cmd_retry()"),
but combines it with a fix in the logic by using a kmemdup() call,
making it more robust and less likely to break in the future due to
programmer error.
Cc: Michal Schmidt <mschmidt@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 3056df93f7a8 ("ice: Re-send some AQ commands, as result of EBUSY AQ error")
Signed-off-by: Jakub Staniszewski <jakub.staniszewski@linux.intel.com>
Co-developed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Signed-off-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8d76afe84fa2babf604b3c173730d4d2b067e361 upstream.
Even privileged services should not necessarily be able to see other
privileged service's namespaces so they can't leak information to each
other. Use may_see_all_namespaces() helper that centralizes this policy
until the nstree adapts.
Link: https://patch.msgid.link/20260226-work-visibility-fixes-v1-3-d2c2853313bd@kernel.org
Fixes: 76b6f5dfb3fd ("nstree: add listns()")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Cc: stable@kernel.org # v6.19+
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d2324a9317f00013facb0ba00b00440e19d2af5e upstream.
Even privileged services should not necessarily be able to see other
privileged service's namespaces so they can't leak information to each
other. Use may_see_all_namespaces() helper that centralizes this policy
until the nstree adapts.
Link: https://patch.msgid.link/20260226-work-visibility-fixes-v1-2-d2c2853313bd@kernel.org
Fixes: 5222470b2fbb ("nsfs: support file handles")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Cc: stable@kernel.org # v6.18+
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d320f160aa5ff36cdf83c645cca52b615e866e32 upstream.
Filesystems should never provide a delayed allocation mapping to
writeback; they're supposed to allocate the space before replying.
This can lead to weird IO errors and crashes in the block layer if the
filesystem is being malicious, or if it hadn't set iomap->dev because
it's a delalloc mapping.
Fix this by failing writeback on delalloc mappings. Currently no
filesystems actually misbehave in this manner, but we ought to be
stricter about things like that.
Cc: stable@vger.kernel.org # v5.5
Fixes: 598ecfbaa742ac ("iomap: lift the xfs writeback code to iomap")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Link: https://patch.msgid.link/20260302173002.GL13829@frogsfrogsfrogs
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit debc1a492b2695d05973994fb0f796dbd9ceaae6 upstream.
If a folio has ifs metadata attached to it and the folio is partially
read in through an async IO helper with the rest of it then being read
in through post-EOF zeroing or as inline data, and the helper
successfully finishes the read first, then post-EOF zeroing / reading
inline will mark the folio as uptodate in iomap_set_range_uptodate().
This is a problem because when the read completion path later calls
iomap_read_end(), it will call folio_end_read(), which sets the uptodate
bit using XOR semantics. Calling folio_end_read() on a folio that was
already marked uptodate clears the uptodate bit.
Fix this by not marking the folio as uptodate if the read IO has bytes
pending. The folio uptodate state will be set in the read completion
path through iomap_end_read() -> folio_end_read().
Reported-by: Wei Gao <wegao@suse.com>
Suggested-by: Sasha Levin <sashal@kernel.org>
Tested-by: Wei Gao <wegao@suse.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Cc: stable@vger.kernel.org # v6.19
Link: https://lore.kernel.org/linux-fsdevel/aYbmy8JdgXwsGaPP@autotest-wegao.qe.prg2.suse.org/
Fixes: b2f35ac4146d ("iomap: add caller-provided callbacks for read and readahead")
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://patch.msgid.link/20260303233420.874231-2-joannelkoong@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b06ccbabe2506fd70b9167a644978b049150224a upstream.
During scx_enable(), the READY -> ENABLED task switching loop changes the
calling thread's sched_class from fair to ext. Since fair has higher
priority than ext, saturating fair-class workloads can indefinitely starve
the enable thread, hanging the system. This was introduced when the enable
path switched from preempt_disable() to scx_bypass() which doesn't protect
against fair-class starvation. Note that the original preempt_disable()
protection wasn't complete either - in partial switch modes, the calling
thread could still be starved after preempt_enable() as it may have been
switched to ext class.
Fix it by offloading the enable body to a dedicated system-wide RT
(SCHED_FIFO) kthread which cannot be starved by either fair or ext class
tasks. scx_enable() lazily creates the kthread on first use and passes the
ops pointer through a struct scx_enable_cmd containing the kthread_work,
then synchronously waits for completion.
The workfn runs on a different kthread from sch->helper (which runs
disable_work), so it can safely flush disable_work on the error path
without deadlock.
Fixes: 8c2090c504e9 ("sched_ext: Initialize in bypass mode")
Cc: stable@vger.kernel.org # v6.12+
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 83236b2e43dba00bee5b82eb5758816b1a674f6a upstream.
scx_claim_exit() atomically sets exit_kind, which prevents scx_error() from
triggering further error handling. After claiming exit, the caller must kick
the helper kthread work which initiates bypass mode and teardown.
If the calling task gets preempted between claiming exit and kicking the
helper work, and the BPF scheduler fails to schedule it back (since error
handling is now disabled), the helper work is never queued, bypass mode
never activates, tasks stop being dispatched, and the system wedges.
Disable preemption across scx_claim_exit() and the subsequent work kicking
in all callers - scx_disable() and scx_vexit(). Add
lockdep_assert_preemption_disabled() to scx_claim_exit() to enforce the
requirement.
Fixes: f0e1a0643a59 ("sched_ext: Implement BPF extensible scheduler class")
Cc: stable@vger.kernel.org # v6.12+
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
btrfs_chunk_map_num_copies()
commit f15fb3d41543244d1179f423da4a4832a55bc050 upstream.
Fix a chunk map leak in btrfs_map_block(): if we return early with -EINVAL,
we're not freeing the chunk map that we've just looked up.
Fixes: 0ae653fbec2b ("btrfs: reduce chunk_map lookups in btrfs_map_block()")
CC: stable@vger.kernel.org # 6.12+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
supports
commit ce9e40a9a5e5cff0b1b0d2fa582b3d71a8ce68e8 upstream.
The ITS driver blindly assumes that EventIDs are in abundant supply, to the
point where it never checks how many the hardware actually supports.
It turns out that some pretty esoteric integrations make it so that only a
few bits are available, all the way down to a single bit.
Enforce the advertised limitation at the point of allocating the device
structure, and hope that the endpoint driver can deal with such limitation.
Fixes: 84a6a2e7fc18d ("irqchip: GICv3: ITS: device allocation and configuration")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Zenghui Yu <zenghui.yu@linux.dev>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260206154816.3582887-1-maz@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2692c614f8f05929d692b3dbfd3faef1f00fbaf0 upstream.
When device_get_child_node_count() got split to the fwnode and device
respective APIs, the fwnode didn't inherit the ability to traverse over
the secondary fwnode. Hence any user, that switches from device to fwnode
API misses this feature. In particular, this was revealed by the commit
1490cbb9dbfd ("device property: Split fwnode_get_child_node_count()")
that effectively broke the GPIO enumeration on Intel Galileo boards.
Fix this by moving the secondary lookup from device to fwnode API.
Note, in general no device_*() API should go into the depth of the fwnode
implementation.
Fixes: 114dbb4fa7c4 ("drivers property: When no children in primary, try secondary")
Cc: stable@vger.kernel.org
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://patch.msgid.link/20260210135822.47335-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 92978c83bb4eef55d02a6c990c01c423131eefa7 upstream.
nfsd_nl_listener_set_doit() uses get_current_cred() without
put_cred().
As we can see from other callers, svc_xprt_create_from_sa()
does not require the extra refcount.
nfsd_nl_listener_set_doit() is always in the process context,
sendmsg(), and current->cred does not go away.
Let's use current_cred() in nfsd_nl_listener_set_doit().
Fixes: 16a471177496 ("NFSD: add listener-{set,get} netlink command")
Cc: stable@vger.kernel.org
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 47a8aad135ac1aed04b7b0c0a8157fd208075827 upstream.
vm_get_page_prot() short-circuits the protection_map[] lookup for a
VM_SHADOW_STACK mapping since it uses a different PIE index from the
typical read/write/exec permissions. However, the side effect is that it
also ignores mprotect(PROT_NONE) by creating an accessible PTE.
Special-case the !(vm_flags & VM_ACCESS_FLAGS) flags to use the
protection_map[VM_NONE] permissions instead. No GCS attributes are
required for an inaccessible PTE.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Fixes: 6497b66ba694 ("arm64/mm: Map pages for guarded control stack")
Cc: stable@vger.kernel.org
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Reviewed-by: David Hildenbrand (Arm) <david@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ad6fface76da42721c15e8fb281570aaa44a2c01 upstream.
We don't check if cookies are available on the kprobe_multi link
before accessing them in show_fdinfo callback, we should.
Cc: stable@vger.kernel.org
Fixes: da7e9c0a7fbc ("bpf: Add show_fdinfo for kprobe_multi")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20260225111249.186230-1-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
