summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2026-03-13smb/client: fix buffer size for smb311_posix_qinfo in SMB311_posix_query_info()ZhangGuoDong
[ Upstream commit 9621b996e4db1dbc2b3dc5d5910b7d6179397320 ] SMB311_posix_query_info() is currently unused, but it may still be used in some stable versions, so these changes are submitted as a separate patch. Use `sizeof(struct smb311_posix_qinfo)` instead of sizeof its pointer, so the allocated buffer matches the actual struct size. Fixes: b1bc1874b885 ("smb311: Add support for SMB311 query info (non-compounded)") Reported-by: ChenXiaoSong <chenxiaosong@kylinos.cn> Signed-off-by: ZhangGuoDong <zhangguodong@kylinos.cn> Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13smb/client: fix buffer size for smb311_posix_qinfo in smb2_compound_op()ZhangGuoDong
[ Upstream commit 12c43a062acb0ac137fc2a4a106d4d084b8c5416 ] Use `sizeof(struct smb311_posix_qinfo)` instead of sizeof its pointer, so the allocated buffer matches the actual struct size. Fixes: 6a5f6592a0b6 ("SMB311: Add support for query info using posix extensions (level 100)") Reported-by: ChenXiaoSong <chenxiaosong@kylinos.cn> Signed-off-by: ZhangGuoDong <zhangguodong@kylinos.cn> Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13bpf: Fix a UAF issue in bpf_trampoline_link_cgroup_shimLang Xu
[ Upstream commit 56145d237385ca0e7ca9ff7b226aaf2eb8ef368b ] The root cause of this bug is that when 'bpf_link_put' reduces the refcount of 'shim_link->link.link' to zero, the resource is considered released but may still be referenced via 'tr->progs_hlist' in 'cgroup_shim_find'. The actual cleanup of 'tr->progs_hlist' in 'bpf_shim_tramp_link_release' is deferred. During this window, another process can cause a use-after-free via 'bpf_trampoline_link_cgroup_shim'. Based on Martin KaFai Lau's suggestions, I have created a simple patch. To fix this: Add an atomic non-zero check in 'bpf_trampoline_link_cgroup_shim'. Only increment the refcount if it is not already zero. Testing: I verified the fix by adding a delay in 'bpf_shim_tramp_link_release' to make the bug easier to trigger: static void bpf_shim_tramp_link_release(struct bpf_link *link) { /* ... */ if (!shim_link->trampoline) return; + msleep(100); WARN_ON_ONCE(bpf_trampoline_unlink_prog(&shim_link->link, shim_link->trampoline, NULL)); bpf_trampoline_put(shim_link->trampoline); } Before the patch, running a PoC easily reproduced the crash(almost 100%) with a call trace similar to KaiyanM's report. After the patch, the bug no longer occurs even after millions of iterations. Fixes: 69fd337a975c ("bpf: per-cgroup lsm flavor") Reported-by: Kaiyan Mei <M202472210@hust.edu.cn> Closes: https://lore.kernel.org/bpf/3c4ebb0b.46ff8.19abab8abe2.Coremail.kaiyanm@hust.edu.cn/ Signed-off-by: Lang Xu <xulang@uniontech.com> Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://patch.msgid.link/279EEE1BA1DDB49D+20260303095217.34436-1-xulang@uniontech.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13iavf: fix netdev->max_mtu to respect actual hardware limitKohei Enju
[ Upstream commit b84852170153671bb0fa6737a6e48370addd8e1a ] iavf sets LIBIE_MAX_MTU as netdev->max_mtu, ignoring vf_res->max_mtu from PF [1]. This allows setting an MTU beyond the actual hardware limit, causing TX queue timeouts [2]. Set correct netdev->max_mtu using vf_res->max_mtu from the PF. Note that currently PF drivers such as ice/i40e set the frame size in vf_res->max_mtu, not MTU. Convert vf_res->max_mtu to MTU before setting netdev->max_mtu. [1] # ip -j -d link show $DEV | jq '.[0].max_mtu' 16356 [2] iavf 0000:00:05.0 enp0s5: NETDEV WATCHDOG: CPU: 1: transmit queue 0 timed out 5692 ms iavf 0000:00:05.0 enp0s5: NIC Link is Up Speed is 10 Gbps Full Duplex iavf 0000:00:05.0 enp0s5: NETDEV WATCHDOG: CPU: 6: transmit queue 3 timed out 5312 ms iavf 0000:00:05.0 enp0s5: NIC Link is Up Speed is 10 Gbps Full Duplex ... Fixes: 5fa4caff59f2 ("iavf: switch to Page Pool") Signed-off-by: Kohei Enju <kohei@enjuk.jp> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13xen/acpi-processor: fix _CST detection using undersized evaluation bufferDavid Thomson
[ Upstream commit 8b57227d59a86fc06d4f09de08f98133680f2cae ] read_acpi_id() attempts to evaluate _CST using a stack buffer of sizeof(union acpi_object) (48 bytes), but _CST returns a nested Package of sub-Packages (one per C-state, each containing a register descriptor, type, latency, and power) requiring hundreds of bytes. The evaluation always fails with AE_BUFFER_OVERFLOW. On modern systems using FFH/MWAIT entry (where pblk is zero), this causes the function to return before setting the acpi_id_cst_present bit. In check_acpi_ids(), flags.power is then zero for all Phase 2 CPUs (physical CPUs beyond dom0's vCPU count), so push_cxx_to_hypervisor() is never called for them. On a system with dom0_max_vcpus=2 and 8 physical CPUs, only PCPUs 0-1 receive C-state data. PCPUs 2-7 are stuck in C0/C1 idle, unable to enter C2/C3. This costs measurable wall power (4W observed on an Intel Core Ultra 7 265K with Xen 4.20). The function never uses the _CST return value -- it only needs to know whether _CST exists. Replace the broken acpi_evaluate_object() call with acpi_has_method(), which correctly detects _CST presence using acpi_get_handle() without any buffer allocation. This brings C-state detection to parity with the P-state path, which already works correctly for Phase 2 CPUs. Fixes: 59a568029181 ("xen/acpi-processor: C and P-state driver that uploads said data to hypervisor.") Signed-off-by: David Thomson <dt@linux-mail.net> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> Message-ID: <20260224093707.19679-1-dt@linux-mail.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13net/rds: Fix circular locking dependency in rds_tcp_tuneAllison Henderson
[ Upstream commit 6a877ececd6daa002a9a0002cd0fbca6592a9244 ] syzbot reported a circular locking dependency in rds_tcp_tune() where sk_net_refcnt_upgrade() is called while holding the socket lock: ====================================================== WARNING: possible circular locking dependency detected ====================================================== kworker/u10:8/15040 is trying to acquire lock: ffffffff8e9aaf80 (fs_reclaim){+.+.}-{0:0}, at: __kmalloc_cache_noprof+0x4b/0x6f0 but task is already holding lock: ffff88805a3c1ce0 (k-sk_lock-AF_INET6){+.+.}-{0:0}, at: rds_tcp_tune+0xd7/0x930 The issue occurs because sk_net_refcnt_upgrade() performs memory allocation (via get_net_track() -> ref_tracker_alloc()) while the socket lock is held, creating a circular dependency with fs_reclaim. Fix this by moving sk_net_refcnt_upgrade() outside the socket lock critical section. This is safe because the fields modified by the sk_net_refcnt_upgrade() call (sk_net_refcnt, ns_tracker) are not accessed by any concurrent code path at this point. v2: - Corrected fixes tag - check patch line wrap nits - ai commentary nits Reported-by: syzbot+2e2cf5331207053b8106@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=2e2cf5331207053b8106 Fixes: 3a58f13a881e ("net: rds: acquire refcount on TCP sockets") Signed-off-by: Allison Henderson <achender@kernel.org> Link: https://patch.msgid.link/20260227202336.167757-1-achender@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13indirect_call_wrapper: do not reevaluate function pointerEric Dumazet
[ Upstream commit 710f5c76580306cdb9ec51fac8fcf6a8faff7821 ] We have an increasing number of READ_ONCE(xxx->function) combined with INDIRECT_CALL_[1234]() helpers. Unfortunately this forces INDIRECT_CALL_[1234]() to read xxx->function many times, which is not what we wanted. Fix these macros so that xxx->function value is not reloaded. $ scripts/bloat-o-meter -t vmlinux.0 vmlinux add/remove: 0/0 grow/shrink: 1/65 up/down: 122/-1084 (-962) Function old new delta ip_push_pending_frames 59 181 +122 ip6_finish_output 687 681 -6 __udp_enqueue_schedule_skb 1078 1072 -6 ioam6_output 2319 2312 -7 xfrm4_rcv_encap_finish2 64 56 -8 xfrm4_output 297 289 -8 vrf_ip_local_out 278 270 -8 vrf_ip6_local_out 278 270 -8 seg6_input_finish 64 56 -8 rpl_output 700 692 -8 ipmr_forward_finish 124 116 -8 ip_forward_finish 143 135 -8 ip6mr_forward2_finish 100 92 -8 ip6_forward_finish 73 65 -8 input_action_end_bpf 1091 1083 -8 dst_input 52 44 -8 __xfrm6_output 801 793 -8 __xfrm4_output 83 75 -8 bpf_input 500 491 -9 __tcp_check_space 530 521 -9 input_action_end_dt6 291 280 -11 vti6_tnl_xmit 1634 1622 -12 bpf_xmit 1203 1191 -12 rpl_input 497 483 -14 rawv6_send_hdrinc 1355 1341 -14 ndisc_send_skb 1030 1016 -14 ipv6_srh_rcv 1377 1363 -14 ip_send_unicast_reply 1253 1239 -14 ip_rcv_finish 226 212 -14 ip6_rcv_finish 300 286 -14 input_action_end_x_core 205 191 -14 input_action_end_x 355 341 -14 input_action_end_t 205 191 -14 input_action_end_dx6_finish 127 113 -14 input_action_end_dx4_finish 373 359 -14 input_action_end_dt4 426 412 -14 input_action_end_core 186 172 -14 input_action_end_b6_encap 292 278 -14 input_action_end_b6 198 184 -14 igmp6_send 1332 1318 -14 ip_sublist_rcv 864 848 -16 ip6_sublist_rcv 1091 1075 -16 ipv6_rpl_srh_rcv 1937 1920 -17 xfrm_policy_queue_process 1246 1228 -18 seg6_output_core 903 885 -18 mld_sendpack 856 836 -20 NF_HOOK 756 736 -20 vti_tunnel_xmit 1447 1426 -21 input_action_end_dx6 664 642 -22 input_action_end 1502 1480 -22 sock_sendmsg_nosec 134 111 -23 ip6mr_forward2 388 364 -24 sock_recvmsg_nosec 134 109 -25 seg6_input_core 836 810 -26 ip_send_skb 172 146 -26 ip_local_out 140 114 -26 ip6_local_out 140 114 -26 __sock_sendmsg 162 136 -26 __ip_queue_xmit 1196 1170 -26 __ip_finish_output 405 379 -26 ipmr_queue_fwd_xmit 373 346 -27 sock_recvmsg 173 145 -28 ip6_xmit 1635 1607 -28 xfrm_output_resume 1418 1389 -29 ip_build_and_send_pkt 625 591 -34 dst_output 504 432 -72 Total: Before=25217686, After=25216724, chg -0.00% Fixes: 283c16a2dfd3 ("indirect call wrappers: helpers to speed-up indirect calls of builtin") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20260227172603.1700433-1-edumazet@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13wifi: mt76: Fix possible oob access in mt76_connac2_mac_write_txwi_80211()Lorenzo Bianconi
[ Upstream commit 4e10a730d1b511ff49723371ed6d694dd1b2c785 ] Check frame length before accessing the mgmt fields in mt76_connac2_mac_write_txwi_80211 in order to avoid a possible oob access. Fixes: 577dbc6c656d ("mt76: mt7915: enable offloading of sequence number assignment") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20260226-mt76-addba-req-oob-access-v1-3-b0f6d1ad4850@kernel.org [fix check to also cover mgmt->u.action.u.addba_req.capab, correct Fixes tag] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13wifi: mt76: mt7925: Fix possible oob access in mt7925_mac_write_txwi_80211()Lorenzo Bianconi
[ Upstream commit c41a9abd6ae31d130e8f332e7c8800c4c866234b ] Check frame length before accessing the mgmt fields in mt7925_mac_write_txwi_80211 in order to avoid a possible oob access. Fixes: c948b5da6bbec ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20260226-mt76-addba-req-oob-access-v1-2-b0f6d1ad4850@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13wifi: mt76: mt7996: Fix possible oob access in mt7996_mac_write_txwi_80211()Lorenzo Bianconi
[ Upstream commit 60862846308627e9e15546bb647a00de44deb27b ] Check frame length before accessing the mgmt fields in mt7996_mac_write_txwi_80211 in order to avoid a possible oob access. Fixes: 98686cd21624c ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20260226-mt76-addba-req-oob-access-v1-1-b0f6d1ad4850@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13wifi: wlcore: Fix a locking bugBart Van Assche
[ Upstream commit 72c6df8f284b3a49812ce2ac136727ace70acc7c ] Make sure that wl->mutex is locked before it is unlocked. This has been detected by the Clang thread-safety analyzer. Fixes: 45aa7f071b06 ("wlcore: Use generic runtime pm calls for wowlan elp configuration") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://patch.msgid.link/20260223220102.2158611-26-bart.vanassche@linux.dev Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13wifi: cw1200: Fix locking in error pathsBart Van Assche
[ Upstream commit d98c24617a831e92e7224a07dcaed2dd0b02af96 ] cw1200_wow_suspend() must only return with priv->conf_mutex locked if it returns zero. This mutex must be unlocked if an error is returned. Add mutex_unlock() calls to the error paths from which that call is missing. This has been detected by the Clang thread-safety analyzer. Fixes: a910e4a94f69 ("cw1200: add driver for the ST-E CW1100 & CW1200 WLAN chipsets") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://patch.msgid.link/20260223220102.2158611-25-bart.vanassche@linux.dev Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13octeon_ep_vf: avoid compiler and IQ/OQ reorderingVimlesh Kumar
[ Upstream commit 6c73126ecd1080351b468fe43353b2f705487f44 ] Utilize READ_ONCE and WRITE_ONCE APIs for IO queue Tx/Rx variable access to prevent compiler optimization and reordering. Additionally, ensure IO queue OUT/IN_CNT registers are flushed by performing a read-back after writing. The compiler could reorder reads/writes to pkts_pending, last_pkt_count, etc., causing stale values to be used when calculating packets to process or register updates to send to hardware. The Octeon hardware requires a read-back after writing to OUT_CNT/IN_CNT registers to ensure the write has been flushed through any posted write buffers before the interrupt resend bit is set. Without this, we have observed cases where the hardware didn't properly update its internal state. wmb/rmb only provides ordering guarantees but doesn't prevent the compiler from performing optimizations like caching in registers, load tearing etc. Fixes: 1cd3b407977c3 ("octeon_ep_vf: add Tx/Rx processing and interrupt support") Signed-off-by: Sathesh Edara <sedara@marvell.com> Signed-off-by: Shinas Rasheed <srasheed@marvell.com> Signed-off-by: Vimlesh Kumar <vimleshk@marvell.com> Link: https://patch.msgid.link/20260227091402.1773833-5-vimleshk@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13octeon_ep_vf: Relocate counter updates before NAPIVimlesh Kumar
[ Upstream commit 2ae7d20fb24f598f60faa8f6ecc856dac782261a ] Relocate IQ/OQ IN/OUT_CNTS updates to occur before NAPI completion. Moving the IQ/OQ counter updates before napi_complete_done ensures 1. Counter registers are updated before re-enabling interrupts. 2. Prevents a race where new packets arrive but counters aren't properly synchronized. Fixes: 1cd3b407977c3 ("octeon_ep_vf: add Tx/Rx processing and interrupt support") Signed-off-by: Sathesh Edara <sedara@marvell.com> Signed-off-by: Shinas Rasheed <srasheed@marvell.com> Signed-off-by: Vimlesh Kumar <vimleshk@marvell.com> Link: https://patch.msgid.link/20260227091402.1773833-4-vimleshk@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13octeon_ep: avoid compiler and IQ/OQ reorderingVimlesh Kumar
[ Upstream commit 43b3160cb639079a15daeb5f080120afbfbfc918 ] Utilize READ_ONCE and WRITE_ONCE APIs for IO queue Tx/Rx variable access to prevent compiler optimization and reordering. Additionally, ensure IO queue OUT/IN_CNT registers are flushed by performing a read-back after writing. The compiler could reorder reads/writes to pkts_pending, last_pkt_count, etc., causing stale values to be used when calculating packets to process or register updates to send to hardware. The Octeon hardware requires a read-back after writing to OUT_CNT/IN_CNT registers to ensure the write has been flushed through any posted write buffers before the interrupt resend bit is set. Without this, we have observed cases where the hardware didn't properly update its internal state. wmb/rmb only provides ordering guarantees but doesn't prevent the compiler from performing optimizations like caching in registers, load tearing etc. Fixes: 37d79d0596062 ("octeon_ep: add Tx/Rx processing and interrupt support") Signed-off-by: Sathesh Edara <sedara@marvell.com> Signed-off-by: Shinas Rasheed <srasheed@marvell.com> Signed-off-by: Vimlesh Kumar <vimleshk@marvell.com> Link: https://patch.msgid.link/20260227091402.1773833-3-vimleshk@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13octeon_ep: Relocate counter updates before NAPIVimlesh Kumar
[ Upstream commit 18c04a808c436d629d5812ce883e3822a5f5a47f ] Relocate IQ/OQ IN/OUT_CNTS updates to occur before NAPI completion, and replace napi_complete with napi_complete_done. Moving the IQ/OQ counter updates before napi_complete_done ensures 1. Counter registers are updated before re-enabling interrupts. 2. Prevents a race where new packets arrive but counters aren't properly synchronized. napi_complete_done (vs napi_complete) allows for better interrupt coalescing. Fixes: 37d79d0596062 ("octeon_ep: add Tx/Rx processing and interrupt support") Signed-off-by: Sathesh Edara <sedara@marvell.com> Signed-off-by: Shinas Rasheed <srasheed@marvell.com> Signed-off-by: Vimlesh Kumar <vimleshk@marvell.com> Link: https://patch.msgid.link/20260227091402.1773833-2-vimleshk@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13bpf/bonding: reject vlan+srcmac xmit_hash_policy change when XDP is loadedJiayuan Chen
[ Upstream commit 479d589b40b836442bbdadc3fdb37f001bb67f26 ] bond_option_mode_set() already rejects mode changes that would make a loaded XDP program incompatible via bond_xdp_check(). However, bond_option_xmit_hash_policy_set() has no such guard. For 802.3ad and balance-xor modes, bond_xdp_check() returns false when xmit_hash_policy is vlan+srcmac, because the 802.1q payload is usually absent due to hardware offload. This means a user can: 1. Attach a native XDP program to a bond in 802.3ad/balance-xor mode with a compatible xmit_hash_policy (e.g. layer2+3). 2. Change xmit_hash_policy to vlan+srcmac while XDP remains loaded. This leaves bond->xdp_prog set but bond_xdp_check() now returning false for the same device. When the bond is later destroyed, dev_xdp_uninstall() calls bond_xdp_set(dev, NULL, NULL) to remove the program, which hits the bond_xdp_check() guard and returns -EOPNOTSUPP, triggering: WARN_ON(dev_xdp_install(dev, mode, bpf_op, NULL, 0, NULL)) Fix this by rejecting xmit_hash_policy changes to vlan+srcmac when an XDP program is loaded on a bond in 802.3ad or balance-xor mode. commit 39a0876d595b ("net, bonding: Disallow vlan+srcmac with XDP") introduced bond_xdp_check() which returns false for 802.3ad/balance-xor modes when xmit_hash_policy is vlan+srcmac. The check was wired into bond_xdp_set() to reject XDP attachment with an incompatible policy, but the symmetric path -- preventing xmit_hash_policy from being changed to an incompatible value after XDP is already loaded -- was left unguarded in bond_option_xmit_hash_policy_set(). Note: commit 094ee6017ea0 ("bonding: check xdp prog when set bond mode") later added a similar guard to bond_option_mode_set(), but bond_option_xmit_hash_policy_set() remained unprotected. Reported-by: syzbot+5a287bcdc08104bc3132@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/6995aff6.050a0220.2eeac1.014e.GAE@google.com/T/ Fixes: 39a0876d595b ("net, bonding: Disallow vlan+srcmac with XDP") Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com> Link: https://patch.msgid.link/20260226080306.98766-2-jiayuan.chen@linux.dev Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13net: dsa: realtek: rtl8365mb: fix rtl8365mb_phy_ocp_write return valueMieczyslaw Nalewaj
[ Upstream commit 7cbe98f7bef965241a5908d50d557008cf998aee ] Function rtl8365mb_phy_ocp_write() always returns 0, even when an error occurs during register access. This patch fixes the return value to propagate the actual error code from regmap operations. Link: https://lore.kernel.org/netdev/a2dfde3c-d46f-434b-9d16-1e251e449068@yahoo.com/ Fixes: 2796728460b8 ("net: dsa: realtek: rtl8365mb: serialize indirect PHY register access") Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com> Reviewed-by: Linus Walleij <linusw@kernel.org> Link: https://patch.msgid.link/20260301-realtek_namiltd_fix1-v1-1-43a6bb707f9c@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13kunit: tool: copy caller args in run_kernel to prevent mutationShuvam Pandey
[ Upstream commit 40804c4974b8df2adab72f6475d343eaff72b7f6 ] run_kernel() appended KUnit flags directly to the caller-provided args list. When exec_tests() calls run_kernel() repeatedly (e.g. with --run_isolated), each call mutated the same list, causing later runs to inherit stale filter_glob values and duplicate kunit.enable flags. Fix this by copying args at the start of run_kernel(). Add a regression test that calls run_kernel() twice with the same list and verifies the original remains unchanged. Fixes: ff9e09a3762f ("kunit: tool: support running each suite/test separately") Signed-off-by: Shuvam Pandey <shuvampandey1@gmail.com> Reviewed-by: David Gow <david@davidgow.net> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13rust: kunit: fix warning when !CONFIG_PRINTKAlexandre Courbot
[ Upstream commit 7dd34dfc8dfa92a7244242098110388367996ac3 ] If `CONFIG_PRINTK` is not set, then the following warnings are issued during build: warning: unused variable: `args` --> ../rust/kernel/kunit.rs:16:12 | 16 | pub fn err(args: fmt::Arguments<'_>) { | ^^^^ help: if this is intentional, prefix it with an underscore: `_args` | = note: `#[warn(unused_variables)]` (part of `#[warn(unused)]`) on by default warning: unused variable: `args` --> ../rust/kernel/kunit.rs:32:13 | 32 | pub fn info(args: fmt::Arguments<'_>) { | ^^^^ help: if this is intentional, prefix it with an underscore: `_args` Fix this by adding a no-op assignment using `args` when `CONFIG_PRINTK` is not set. Fixes: a66d733da801 ("rust: support running Rust documentation tests as KUnit ones") Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: David Gow <david@davidgow.net> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13drm/xe: Do not preempt fence signaling CS instructionsMatthew Brost
[ Upstream commit cdc8a1e11f4d5b480ec750e28010c357185b95a6 ] If a batch buffer is complete, it makes little sense to preempt the fence signaling instructions in the ring, as the largest portion of the work (the batch buffer) is already done and fence signaling consists of only a few instructions. If these instructions are preempted, the GuC would need to perform a context switch just to signal the fence, which is costly and delays fence signaling. Avoid this scenario by disabling preemption immediately after the BB start instruction and re-enabling it after executing the fence signaling instructions. Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Carlos Santa <carlos.santa@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patch.msgid.link/20260115004546.58060-1-matthew.brost@intel.com (cherry picked from commit 2bcbf2dcde0c839a73af664a3c77d4e77d58a3eb) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13wifi: rsi: Don't default to -EOPNOTSUPP in rsi_mac80211_configSebastian Krzyszkowiak
[ Upstream commit d973b1039ccde6b241b438d53297edce4de45b5c ] This triggers a WARN_ON in ieee80211_hw_conf_init and isn't the expected behavior from the driver - other drivers default to 0 too. Fixes: 0a44dfc07074 ("wifi: mac80211: simplify non-chanctx drivers") Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> Link: https://patch.msgid.link/20260221-rsi-config-ret-v1-1-9a8f805e2f31@puri.sm Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13can: mcp251x: fix deadlock in error path of mcp251x_openAlban Bedel
[ Upstream commit ab3f894de216f4a62adc3b57e9191888cbf26885 ] The mcp251x_open() function call free_irq() in its error path with the mpc_lock mutex held. But if an interrupt already occurred the interrupt handler will be waiting for the mpc_lock and free_irq() will deadlock waiting for the handler to finish. This issue is similar to the one fixed in commit 7dd9c26bd6cf ("can: mcp251x: fix deadlock if an interrupt occurs during mcp251x_open") but for the error path. To solve this issue move the call to free_irq() after the lock is released. Setting `priv->force_quit = 1` beforehand ensure that the IRQ handler will exit right away once it acquired the lock. Signed-off-by: Alban Bedel <alban.bedel@lht.dlh.de> Link: https://patch.msgid.link/20260209144706.2261954-1-alban.bedel@lht.dlh.de Fixes: bf66f3736a94 ("can: mcp251x: Move to threaded interrupts instead of workqueues.") Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13can: bcm: fix locking for bcm_op runtime updatesOliver Hartkopp
[ Upstream commit c35636e91e392e1540949bbc67932167cb48bc3a ] Commit c2aba69d0c36 ("can: bcm: add locking for bcm_op runtime updates") added a locking for some variables that can be modified at runtime when updating the sending bcm_op with a new TX_SETUP command in bcm_tx_setup(). Usually the RX_SETUP only handles and filters incoming traffic with one exception: When the RX_RTR_FRAME flag is set a predefined CAN frame is sent when a specific RTR frame is received. Therefore the rx bcm_op uses bcm_can_tx() which uses the bcm_tx_lock that was only initialized in bcm_tx_setup(). Add the missing spin_lock_init() when allocating the bcm_op in bcm_rx_setup() to handle the RTR case properly. Fixes: c2aba69d0c36 ("can: bcm: add locking for bcm_op runtime updates") Reported-by: syzbot+5b11eccc403dd1cea9f8@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-can/699466e4.a70a0220.2c38d7.00ff.GAE@google.com/ Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://patch.msgid.link/20260218-bcm_spin_lock_init-v1-1-592634c8a5b5@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13amd-xgbe: fix MAC_TCR_SS register width for 2.5G and 10M speedsRaju Rangoju
[ Upstream commit 9439a661c2e80485406ce2c90b107ca17858382d ] Extend the MAC_TCR_SS (Speed Select) register field width from 2 bits to 3 bits to properly support all speed settings. The MAC_TCR register's SS field encoding requires 3 bits to represent all supported speeds: - 0x00: 10Gbps (XGMII) - 0x02: 2.5Gbps (GMII) / 100Mbps - 0x03: 1Gbps / 10Mbps - 0x06: 2.5Gbps (XGMII) - P100a only With only 2 bits, values 0x04-0x07 cannot be represented, which breaks 2.5G XGMII mode on newer platforms and causes incorrect speed select values to be programmed. Fixes: 07445f3c7ca1 ("amd-xgbe: Add support for 10 Mbps speed") Co-developed-by: Guruvendra Punugupati <Guruvendra.Punugupati@amd.com> Signed-off-by: Guruvendra Punugupati <Guruvendra.Punugupati@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Link: https://patch.msgid.link/20260226170753.250312-1-Raju.Rangoju@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13net: ti: icssg-prueth: Fix ping failure after offload mode setup when link ↵MD Danish Anwar
speed is not 1G [ Upstream commit 147792c395db870756a0dc87ce656c75ae7ab7e8 ] When both eth interfaces with links up are added to a bridge or hsr interface, ping fails if the link speed is not 1Gbps (e.g., 100Mbps). The issue is seen because when switching to offload (bridge/hsr) mode, prueth_emac_restart() restarts the firmware and clears DRAM with memset_io(), setting all memory to 0. This includes PORT_LINK_SPEED_OFFSET which firmware reads for link speed. The value 0 corresponds to FW_LINK_SPEED_1G (0x00), so for 1Gbps links the default value is correct and ping works. For 100Mbps links, the firmware needs FW_LINK_SPEED_100M (0x01) but gets 0 instead, causing ping to fail. The function emac_adjust_link() is called to reconfigure, but it detects no state change (emac->link is still 1, speed/duplex match PHY) so new_state remains false and icssg_config_set_speed() is never called to correct the firmware speed value. The fix resets emac->link to 0 before calling emac_adjust_link() in prueth_emac_common_start(). This forces new_state=true, ensuring icssg_config_set_speed() is called to write the correct speed value to firmware memory. Fixes: 06feac15406f ("net: ti: icssg-prueth: Fix emac link speed handling") Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Link: https://patch.msgid.link/20260226102356.2141871-1-danishanwar@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13atm: lec: fix null-ptr-deref in lec_arp_clear_vccsJiayuan Chen
[ Upstream commit 101bacb303e89dc2e0640ae6a5e0fb97c4eb45bb ] syzkaller reported a null-ptr-deref in lec_arp_clear_vccs(). This issue can be easily reproduced using the syzkaller reproducer. In the ATM LANE (LAN Emulation) module, the same atm_vcc can be shared by multiple lec_arp_table entries (e.g., via entry->vcc or entry->recv_vcc). When the underlying VCC is closed, lec_vcc_close() iterates over all ARP entries and calls lec_arp_clear_vccs() for each matched entry. For example, when lec_vcc_close() iterates through the hlists in priv->lec_arp_empty_ones or other ARP tables: 1. In the first iteration, for the first matched ARP entry sharing the VCC, lec_arp_clear_vccs() frees the associated vpriv (which is vcc->user_back) and sets vcc->user_back to NULL. 2. In the second iteration, for the next matched ARP entry sharing the same VCC, lec_arp_clear_vccs() is called again. It obtains a NULL vpriv from vcc->user_back (via LEC_VCC_PRIV(vcc)) and then attempts to dereference it via `vcc->pop = vpriv->old_pop`, leading to a null-ptr-deref crash. Fix this by adding a null check for vpriv before dereferencing it. If vpriv is already NULL, it means the VCC has been cleared by a previous call, so we can safely skip the cleanup and just clear the entry's vcc/recv_vcc pointers. The entire cleanup block (including vcc_release_async()) is placed inside the vpriv guard because a NULL vpriv indicates the VCC has already been fully released by a prior iteration — repeating the teardown would redundantly set flags and trigger callbacks on an already-closing socket. The Fixes tag points to the initial commit because the entry->vcc path has been vulnerable since the original code. The entry->recv_vcc path was later added by commit 8d9f73c0ad2f ("atm: fix a memory leak of vcc->user_back") with the same pattern, and both paths are fixed here. Reported-by: syzbot+72e3ea390c305de0e259@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/68c95a83.050a0220.3c6139.0e5c.GAE@google.com/T/ Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Suggested-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com> Link: https://patch.msgid.link/20260225123250.189289-1-jiayuan.chen@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13dpaa2-switch: Fix interrupt storm after receiving bad if_id in IRQ handlerGuenter Roeck
[ Upstream commit 74badb9c20b1a9c02a95c735c6d3cd6121679c93 ] Commit 31a7a0bbeb00 ("dpaa2-switch: add bounds check for if_id in IRQ handler") introduces a range check for if_id to avoid an out-of-bounds access. If an out-of-bounds if_id is detected, the interrupt status is not cleared. This may result in an interrupt storm. Clear the interrupt status after detecting an out-of-bounds if_id to avoid the problem. Found by an experimental AI code review agent at Google. Fixes: 31a7a0bbeb00 ("dpaa2-switch: add bounds check for if_id in IRQ handler") Cc: Junrui Luo <moonafterrain@outlook.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Link: https://patch.msgid.link/20260227055812.1777915-1-linux@roeck-us.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13xsk: Fix zero-copy AF_XDP fragment dropNikhil P. Rao
[ Upstream commit f7387d6579d65efd490a864254101cb665f2e7a7 ] AF_XDP should ensure that only a complete packet is sent to application. In the zero-copy case, if the Rx queue gets full as fragments are being enqueued, the remaining fragments are dropped. For the multi-buffer case, add a check to ensure that the Rx queue has enough space for all fragments of a packet before starting to enqueue them. Fixes: 24ea50127ecf ("xsk: support mbuf on ZC RX") Signed-off-by: Nikhil P. Rao <nikhil.rao@amd.com> Link: https://patch.msgid.link/20260225000456.107806-3-nikhil.rao@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13xsk: Fix fragment node deletion to prevent buffer leakNikhil P. Rao
[ Upstream commit 60abb0ac11dccd6b98fd9182bc5f85b621688861 ] After commit b692bf9a7543 ("xsk: Get rid of xdp_buff_xsk::xskb_list_node"), the list_node field is reused for both the xskb pool list and the buffer free list, this causes a buffer leak as described below. xp_free() checks if a buffer is already on the free list using list_empty(&xskb->list_node). When list_del() is used to remove a node from the xskb pool list, it doesn't reinitialize the node pointers. This means list_empty() will return false even after the node has been removed, causing xp_free() to incorrectly skip adding the buffer to the free list. Fix this by using list_del_init() instead of list_del() in all fragment handling paths, this ensures the list node is reinitialized after removal, allowing the list_empty() to work correctly. Fixes: b692bf9a7543 ("xsk: Get rid of xdp_buff_xsk::xskb_list_node") Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Nikhil P. Rao <nikhil.rao@amd.com> Link: https://patch.msgid.link/20260225000456.107806-2-nikhil.rao@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: f7387d6579d6 ("xsk: Fix zero-copy AF_XDP fragment drop") Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13xsk: s/free_list_node/list_node/Maciej Fijalkowski
[ Upstream commit 30ec2c1baaead43903ad63ff8e3083949059083c ] Now that free_list_node's purpose is two-folded, make it just a 'list_node'. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/bpf/20241007122458.282590-3-maciej.fijalkowski@intel.com Stable-dep-of: f7387d6579d6 ("xsk: Fix zero-copy AF_XDP fragment drop") Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13xsk: Get rid of xdp_buff_xsk::xskb_list_nodeMaciej Fijalkowski
[ Upstream commit b692bf9a7543af7ad11a59d182a3757578f0ba53 ] Let's bring xdp_buff_xsk back to occupying 2 cachelines by removing xskb_list_node - for the purpose of gathering the xskb frags free_list_node can be used, head of the list (xsk_buff_pool::xskb_list) stays as-is, just reuse the node ptr. It is safe to do as a single xdp_buff_xsk can never reside in two pool's lists simultaneously. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/bpf/20241007122458.282590-2-maciej.fijalkowski@intel.com Stable-dep-of: f7387d6579d6 ("xsk: Fix zero-copy AF_XDP fragment drop") Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13net: ethernet: ti: am65-cpsw-nuss/cpsw-ale: Fix multicast entry handling in ↵Chintan Vankar
ALE table [ Upstream commit be11a537224d72b906db6b98510619770298c8a4 ] In the current implementation, flushing multicast entries in MAC mode incorrectly deletes entries for all ports instead of only the target port, disrupting multicast traffic on other ports. The cause is adding multicast entries by setting only host port bit, and not setting the MAC port bits. Fix this by setting the MAC port's bit in the port mask while adding the multicast entry. Also fix the flush logic to preserve the host port bit during removal of MAC port and free ALE entries when mask contains only host port. Fixes: 5c50a856d550 ("drivers: net: ethernet: cpsw: add multicast address to ALE table") Signed-off-by: Chintan Vankar <c-vankar@ti.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20260224181359.2055322-1-c-vankar@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13drm/solomon: Fix page start when updating rectangle in page addressing modeFrancesco Lavra
[ Upstream commit 36d9579fed6c9429aa172f77bd28c58696ce8e2b ] In page addressing mode, the pixel values of a dirty rectangle must be sent to the display controller one page at a time. The range of pages corresponding to a given rectangle is being incorrectly calculated as if the Y value of the top left coordinate of the rectangle was 0. This can result in rectangle updates being displayed on wrong parts of the screen. Fix the above issue by consolidating the start page calculation in a single place at the beginning of the update_rect function, and using the calculated value for all addressing modes. Fixes: b0daaa5cfaa5 ("drm/ssd130x: Support page addressing mode") Signed-off-by: Francesco Lavra <flavra@baylibre.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patch.msgid.link/20260210180932.736502-1-flavra@baylibre.com Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13e1000e: clear DPG_EN after reset to avoid autonomous power-gatingVitaly Lifshits
[ Upstream commit 0942fc6d324eb9c6b16187b2aa994c0823557f06 ] Panther Lake systems introduced an autonomous power gating feature for the integrated Gigabit Ethernet in shutdown state (S5) state. As part of it, the reset value of DPG_EN bit was changed to 1. Clear this bit after performing hardware reset to avoid errors such as Tx/Rx hangs, or packet loss/corruption. Fixes: 0c9183ce61bc ("e1000e: Add support for the next LOM generation") Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Avigail Dahan <avigailx.dahan@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13i40e: Fix preempt count leak in napi poll tracepointThomas Gleixner
[ Upstream commit 4b3d54a85bd37ebf2d9836f0d0de775c0ff21af9 ] Using get_cpu() in the tracepoint assignment causes an obvious preempt count leak because nothing invokes put_cpu() to undo it: softirq: huh, entered softirq 3 NET_RX with preempt_count 00000100, exited with 00000101? This clearly has seen a lot of testing in the last 3+ years... Use smp_processor_id() instead. Fixes: 6d4d584a7ea8 ("i40e: Add i40e_napi_poll tracepoint") Signed-off-by: Thomas Gleixner <tglx@kernel.org> Cc: Tony Nguyen <anthony.l.nguyen@intel.com> Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com> Cc: intel-wired-lan@lists.osuosl.org Cc: netdev@vger.kernel.org Reviewed-by: Joe Damato <joe@dama.to> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13idpf: change IRQ naming to match netdev and ethtool queue numberingBrian Vazquez
[ Upstream commit 1500a8662d2d41d6bb03e034de45ddfe6d7d362d ] The code uses the vidx for the IRQ name but that doesn't match ethtool reporting nor netdev naming, this makes it hard to tune the device and associate queues with IRQs. Sequentially requesting irqs starting from '0' makes the output consistent. This commit changes the interrupt numbering but preserves the name format, maintaining ABI compatibility. Existing tools relying on the old numbering are already non-functional, as they lack a useful correlation to the interrupts. Before: ethtool -L eth1 tx 1 combined 3 grep . /proc/irq/*/*idpf*/../smp_affinity_list /proc/irq/67/idpf-Mailbox-0/../smp_affinity_list:0-55,112-167 /proc/irq/68/idpf-eth1-TxRx-1/../smp_affinity_list:0 /proc/irq/70/idpf-eth1-TxRx-3/../smp_affinity_list:1 /proc/irq/71/idpf-eth1-TxRx-4/../smp_affinity_list:2 /proc/irq/72/idpf-eth1-Tx-5/../smp_affinity_list:3 ethtool -S eth1 | grep -v ': 0' NIC statistics: tx_q-0_pkts: 1002 tx_q-1_pkts: 2679 tx_q-2_pkts: 1113 tx_q-3_pkts: 1192 <----- tx_q-3 vs idpf-eth1-Tx-5 rx_q-0_pkts: 1143 rx_q-1_pkts: 3172 rx_q-2_pkts: 1074 After: ethtool -L eth1 tx 1 combined 3 grep . /proc/irq/*/*idpf*/../smp_affinity_list /proc/irq/67/idpf-Mailbox-0/../smp_affinity_list:0-55,112-167 /proc/irq/68/idpf-eth1-TxRx-0/../smp_affinity_list:0 /proc/irq/70/idpf-eth1-TxRx-1/../smp_affinity_list:1 /proc/irq/71/idpf-eth1-TxRx-2/../smp_affinity_list:2 /proc/irq/72/idpf-eth1-Tx-3/../smp_affinity_list:3 ethtool -S eth1 | grep -v ': 0' NIC statistics: tx_q-0_pkts: 118 tx_q-1_pkts: 134 tx_q-2_pkts: 228 tx_q-3_pkts: 138 <--- tx_q-3 matches idpf-eth1-Tx-3 rx_q-0_pkts: 111 rx_q-1_pkts: 366 rx_q-2_pkts: 120 Fixes: d4d558718266 ("idpf: initialize interrupts and enable vport") Signed-off-by: Brian Vazquez <brianvv@google.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Tested-by: Samuel Salin <Samuel.salin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13hwmon: (it87) Check the it87_lock() return valueBart Van Assche
[ Upstream commit 07ed4f05bbfd2bc014974dcc4297fd3aa1cb88c0 ] Return early in it87_resume() if it87_lock() fails instead of ignoring the return value of that function. This patch suppresses a Clang thread-safety warning. Cc: Frank Crawford <frank@crawford.emu.id.au> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jean Delvare <jdelvare@suse.com> Cc: linux-hwmon@vger.kernel.org Fixes: 376e1a937b30 ("hwmon: (it87) Add calls to smbus_enable/smbus_disable as required") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20260223220102.2158611-15-bart.vanassche@linux.dev [groeck: Declare 'ret' at the beginning of it87_resume()] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13pinctrl: cirrus: cs42l43: Fix double-put in cs42l43_pin_probe()Felix Gu
[ Upstream commit fd5bed798f45eb3a178ad527b43ab92705faaf8a ] devm_add_action_or_reset() already invokes the action on failure, so the explicit put causes a double-put. Fixes: 9b07cdf86a0b ("pinctrl: cirrus: Fix fwnode leak in cs42l43_pin_probe()") Signed-off-by: Felix Gu <ustc.gu@gmail.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Linus Walleij <linusw@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13HID: multitouch: new class MT_CLS_EGALAX_P80H84Ian Ray
[ Upstream commit a2e70a89fa58133521b2deae4427d35776bda935 ] Fixes: f9e82295eec1 ("HID: multitouch: add eGalaxTouch P80H84 support") Signed-off-by: Ian Ray <ian.ray@gehealthcare.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13HID: multitouch: add quirks for Lenovo Yoga Book 9iBrian Howard
[ Upstream commit 822bc5b3744b0b2c2c9678aa1d80b2cf04fdfabf ] The Lenovo Yoga Book 9i is a dual-screen laptop, with a single composite USB device providing both touch and tablet interfaces for both screens. All inputs report through a single device, differentiated solely by report numbers. As there is no way for udev to differentiate the inputs based on USB vendor/product ID or interface numbers, custom naming is required to match against for downstream configuration. A firmware bug also results in an erroneous InRange message report being received after the stylus leaves proximity, blocking later touch events. Add required quirks for Gen 8 to Gen 10 models, including a new quirk providing for custom input device naming and dropping erroneous InRange reports. Signed-off-by: Brian Howard <blhoward2@gmail.com> Tested-by: Brian Howard <blhoward2@gmail.com> Tested-by: Kris Fredrick <linux.baguette800@slmail.me> Reported-by: Andrei Shumailov <gentoo1993@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220386 Signed-off-by: Jiri Kosina <jkosina@suse.com> Stable-dep-of: a2e70a89fa58 ("HID: multitouch: new class MT_CLS_EGALAX_P80H84") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-03-13platform/x86: thinkpad_acpi: Fix errors reading battery thresholdsJonathan Teh
[ Upstream commit 53e977b1d50c46f2c4ec3865cd13a822f58ad3cd ] Check whether the battery supports the relevant charge threshold before reading the value to silence these errors: thinkpad_acpi: acpi_evalf(BCTG, dd, ...) failed: AE_NOT_FOUND ACPI: \_SB_.PCI0.LPC_.EC__.HKEY: BCTG: evaluate failed thinkpad_acpi: acpi_evalf(BCSG, dd, ...) failed: AE_NOT_FOUND ACPI: \_SB_.PCI0.LPC_.EC__.HKEY: BCSG: evaluate failed when reading the charge thresholds via sysfs on platforms that do not support them such as the ThinkPad T400. Fixes: 2801b9683f74 ("thinkpad_acpi: Add support for battery thresholds") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=202619 Signed-off-by: Jonathan Teh <jonathan.teh@outlook.com> Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Link: https://patch.msgid.link/MI0P293MB01967B206E1CA6F337EBFB12926CA@MI0P293MB0196.ITAP293.PROD.OUTLOOK.COM Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13pinctrl: equilibrium: fix warning trace on loadFlorian Eckert
[ Upstream commit 3e00b1b332e54ba50cca6691f628b9c06574024f ] The callback functions 'eqbr_irq_mask()' and 'eqbr_irq_ack()' are also called in the callback function 'eqbr_irq_mask_ack()'. This is done to avoid source code duplication. The problem, is that in the function 'eqbr_irq_mask()' also calles the gpiolib function 'gpiochip_disable_irq()' This generates the following warning trace in the log for every gpio on load. [ 6.088111] ------------[ cut here ]------------ [ 6.092440] WARNING: CPU: 3 PID: 1 at drivers/gpio/gpiolib.c:3810 gpiochip_disable_irq+0x39/0x50 [ 6.097847] Modules linked in: [ 6.097847] CPU: 3 UID: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.12.59+ #0 [ 6.097847] Tainted: [W]=WARN [ 6.097847] RIP: 0010:gpiochip_disable_irq+0x39/0x50 [ 6.097847] Code: 39 c6 48 19 c0 21 c6 48 c1 e6 05 48 03 b2 38 03 00 00 48 81 fe 00 f0 ff ff 77 11 48 8b 46 08 f6 c4 02 74 06 f0 80 66 09 fb c3 <0f> 0b 90 0f 1f 40 00 c3 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 [ 6.097847] RSP: 0000:ffffc9000000b830 EFLAGS: 00010046 [ 6.097847] RAX: 0000000000000045 RBX: ffff888001be02a0 RCX: 0000000000000008 [ 6.097847] RDX: ffff888001be9000 RSI: ffff888001b2dd00 RDI: ffff888001be02a0 [ 6.097847] RBP: ffffc9000000b860 R08: 0000000000000000 R09: 0000000000000000 [ 6.097847] R10: 0000000000000001 R11: ffff888001b2a154 R12: ffff888001be0514 [ 6.097847] R13: ffff888001be02a0 R14: 0000000000000008 R15: 0000000000000000 [ 6.097847] FS: 0000000000000000(0000) GS:ffff888041d80000(0000) knlGS:0000000000000000 [ 6.097847] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.097847] CR2: 0000000000000000 CR3: 0000000003030000 CR4: 00000000001026b0 [ 6.097847] Call Trace: [ 6.097847] <TASK> [ 6.097847] ? eqbr_irq_mask+0x63/0x70 [ 6.097847] ? no_action+0x10/0x10 [ 6.097847] eqbr_irq_mask_ack+0x11/0x60 In an other driver (drivers/pinctrl/starfive/pinctrl-starfive-jh7100.c) the interrupt is not disabled here. To fix this, do not call the 'eqbr_irq_mask()' and 'eqbr_irq_ack()' function. Implement instead this directly without disabling the interrupts. Fixes: 52066a53bd11 ("pinctrl: equilibrium: Convert to immutable irq_chip") Signed-off-by: Florian Eckert <fe@dev.tdt.de> Signed-off-by: Linus Walleij <linusw@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13pinctrl: equilibrium: rename irq_chip function callbacksFlorian Eckert
[ Upstream commit 1f96b84835eafb3e6f366dc3a66c0e69504cec9d ] Renaming of the irq_chip callback functions to improve clarity. Signed-off-by: Florian Eckert <fe@dev.tdt.de> Signed-off-by: Linus Walleij <linusw@kernel.org> Stable-dep-of: 3e00b1b332e5 ("pinctrl: equilibrium: fix warning trace on load") Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13hwmon: (aht10) Fix initialization commands for AHT20Hao Yu
[ Upstream commit b7497b5a99f54ab8dcda5b14a308385b2fb03d8d ] According to the AHT20 datasheet (updated to V1.0 after the 2023.09 version), the initialization command for AHT20 is 0b10111110 (0xBE). The previous sequence (0xE1) used in earlier versions is no longer compatible with newer AHT20 sensors. Update the initialization command to ensure the sensor is properly initialized. While at it, use binary notation for DHT20_CMD_INIT to match the notation used in the datasheet. Fixes: d2abcb5cc885 ("hwmon: (aht10) Add support for compatible aht20") Signed-off-by: Hao Yu <haoyufine@gmail.com> Link: https://lore.kernel.org/r/20260222170332.1616-3-haoyufine@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13hwmon: (aht10) Add support for dht20Akhilesh Patil
[ Upstream commit 3eaf1b631506e8de2cb37c278d5bc042521e82c1 ] Add support for dht20 temperature and humidity sensor from Aosong. Modify aht10 driver to handle different init command for dht20 sensor by adding init_cmd entry in the driver data. dht20 sensor is compatible with aht10 hwmon driver with this change. Tested on TI am62x SK board with dht20 sensor connected at i2c-2 port. Signed-off-by: Akhilesh Patil <akhilesh@ee.iitb.ac.in> Link: https://lore.kernel.org/r/2025112-94320-906858@bhairav-test.ee.iitb.ac.in Signed-off-by: Guenter Roeck <linux@roeck-us.net> Stable-dep-of: b7497b5a99f5 ("hwmon: (aht10) Fix initialization commands for AHT20") Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13nvme: fix admin queue leak on controller resetMing Lei
[ Upstream commit b84bb7bd913d8ca2f976ee6faf4a174f91c02b8d ] When nvme_alloc_admin_tag_set() is called during a controller reset, a previous admin queue may still exist. Release it properly before allocating a new one to avoid orphaning the old queue. This fixes a regression introduced by commit 03b3bcd319b3 ("nvme: fix admin request_queue lifetime"). Cc: Keith Busch <kbusch@kernel.org> Fixes: 03b3bcd319b3 ("nvme: fix admin request_queue lifetime"). Reported-and-tested-by: Yi Zhang <yi.zhang@redhat.com> Closes: https://lore.kernel.org/linux-block/CAHj4cs9wv3SdPo+N01Fw2SHBYDs9tj2M_e1-GdQOkRy=DsBB1w@mail.gmail.com/ Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13ACPI: APEI: GHES: Disable KASAN instrumentation when compile testing with ↵Nathan Chancellor
clang < 18 [ Upstream commit b584bfbd7ec417f257f651cc00a90c66e31dfbf1 ] After a recent innocuous change to drivers/acpi/apei/ghes.c, building ARCH=arm64 allmodconfig with clang-17 or older (which has both CONFIG_KASAN=y and CONFIG_WERROR=y) fails with: drivers/acpi/apei/ghes.c:902:13: error: stack frame size (2768) exceeds limit (2048) in 'ghes_do_proc' [-Werror,-Wframe-larger-than] 902 | static void ghes_do_proc(struct ghes *ghes, | ^ A KASAN pass that removes unneeded stack instrumentation, enabled by default in clang-18 [1], drastically improves stack usage in this case. To avoid the warning in the common allmodconfig case when it can break the build, disable KASAN for ghes.o when compile testing with clang-17 and older. Disabling KASAN outright may hide legitimate runtime issues, so live with the warning in that case; the user can either increase the frame warning limit or disable -Werror, which they should probably do when debugging with KASAN anyways. Closes: https://github.com/ClangBuiltLinux/linux/issues/2148 Link: https://github.com/llvm/llvm-project/commit/51fbab134560ece663517bf1e8c2a30300d08f1a [1] Signed-off-by: Nathan Chancellor <nathan@kernel.org> Cc: All applicable <stable@vger.kernel.org> Link: https://patch.msgid.link/20260114-ghes-avoid-wflt-clang-older-than-18-v1-1-9c8248bfe4f4@kernel.org Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-13btrfs: always fallback to buffered write if the inode requires checksumQu Wenruo
commit 968f19c5b1b7d5595423b0ac0020cc18dfed8cb5 upstream. [BUG] It is a long known bug that VM image on btrfs can lead to data csum mismatch, if the qemu is using direct-io for the image (this is commonly known as cache mode 'none'). [CAUSE] Inside the VM, if the fs is EXT4 or XFS, or even NTFS from Windows, the fs is allowed to dirty/modify the folio even if the folio is under writeback (as long as the address space doesn't have AS_STABLE_WRITES flag inherited from the block device). This is a valid optimization to improve the concurrency, and since these filesystems have no extra checksum on data, the content change is not a problem at all. But the final write into the image file is handled by btrfs, which needs the content not to be modified during writeback, or the checksum will not match the data (checksum is calculated before submitting the bio). So EXT4/XFS/NTRFS assume they can modify the folio under writeback, but btrfs requires no modification, this leads to the false csum mismatch. This is only a controlled example, there are even cases where multi-thread programs can submit a direct IO write, then another thread modifies the direct IO buffer for whatever reason. For such cases, btrfs has no sane way to detect such cases and leads to false data csum mismatch. [FIX] I have considered the following ideas to solve the problem: - Make direct IO to always skip data checksum This not only requires a new incompatible flag, as it breaks the current per-inode NODATASUM flag. But also requires extra handling for no csum found cases. And this also reduces our checksum protection. - Let hardware handle all the checksum AKA, just nodatasum mount option. That requires trust for hardware (which is not that trustful in a lot of cases), and it's not generic at all. - Always fallback to buffered write if the inode requires checksum This was suggested by Christoph, and is the solution utilized by this patch. The cost is obvious, the extra buffer copying into page cache, thus it reduces the performance. But at least it's still user configurable, if the end user still wants the zero-copy performance, just set NODATASUM flag for the inode (which is a common practice for VM images on btrfs). Since we cannot trust user space programs to keep the buffer consistent during direct IO, we have no choice but always falling back to buffered IO. At least by this, we avoid the more deadly false data checksum mismatch error. Suggested-by: Christoph Hellwig <hch@infradead.org> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-03-13net: stmmac: dwmac-loongson: Set clk_csr_i to 100-150MHzHuacai Chen
commit e1aa5ef892fb4fa9014a25e87b64b97347919d37 upstream. Current clk_csr_i setting of Loongson STMMAC (including LS7A1000/2000 and LS2K1000/2000/3000) are copy & paste from other drivers. In fact, Loongson STMMAC use 125MHz clocks and need 62 freq division to within 2.5MHz, meeting most PHY MDC requirement. So fix by setting clk_csr_i to 100-150MHz, otherwise some PHYs may link fail. Cc: stable@vger.kernel.org Fixes: 30bba69d7db40e7 ("stmmac: pci: Add dwmac support for Loongson") Signed-off-by: Hongliang Wang <wanghongliang@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Link: https://patch.msgid.link/20260203062901.2158236-1-chenhuacai@loongson.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.46.0) at 2026-04-14 10:56:40 +0000