| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit 33c1c6d8a28a2761ac74b0380b2563cf546c2a3a ]
As kcalloc() may fail, check its return value to avoid a NULL pointer
dereference when passing it to of_property_read_u32_array().
Fixes: 790a1662d3a26 ("powerpc/smp: Parse ibm,thread-groups with multiple properties")
Cc: stable@vger.kernel.org
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250923133235.1862108-1-lgs201920130244@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 218b16992a37ea97b9e09b7659a25a864fb9976f ]
"pg_init_delay_msecs X" can be passed as a feature in the multipath
table and is used to set m->pg_init_delay_msecs in parse_features().
However, alloc_multipath_stage2(), which is called after
parse_features(), resets m->pg_init_delay_msecs to its default value.
Instead, set m->pg_init_delay_msecs in alloc_multipath(), which is
called before parse_features(), to avoid overwriting a value passed in
by the table.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 52f527d0916bcdd7621a0c9e7e599b133294d495 ]
In fsl_mc_device_add(), device_initialize() is called first.
put_device() should be called to drop the reference if error
occurs. And other resources would be released via put_device
-> fsl_mc_device_release. So remove redundant kfree() in
error handling path.
Fixes: bbf9d17d9875 ("staging: fsl-mc: Freescale Management Complex (fsl-mc) bus driver")
Cc: stable@vger.kernel.org
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/b767348e-d89c-416e-acea-1ebbff3bea20@stanley.mountain/
Signed-off-by: Su Hui <suhui@nfschina.com>
Suggested-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20260124102054.1613093-1-lihaoxiang@isrc.iscas.ac.cn
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1132e90840abf3e7db11f1d28199e9fbc0b0e69e ]
The COREPLL_PWRDN bit in the BLCG register must be set when the XUSB
device controller is powergated and cleared when it is unpowergated.
If this bit is not explicitly controlled, the core PLL may remain in an
incorrect power state across suspend/resume or ELPG transitions.
Therefore, update the driver to explicitly control this bit during
powergate transitions.
Fixes: 49db427232fe ("usb: gadget: Add UDC driver for tegra XUSB device mode controller")
Cc: stable <stable@kernel.org>
Signed-off-by: Haotien Hsu <haotienh@nvidia.com>
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Link: https://patch.msgid.link/20260123173121.4093902-1-waynec@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c5489d04337b47e93c0623e8145fcba3f5739efd ]
When the second-stage kernel is booted via kexec with a limiting command
line such as "mem=<size>", the physical range that contains the carried
over IMA measurement list may fall outside the truncated RAM leading to a
kernel panic.
BUG: unable to handle page fault for address: ffff97793ff47000
RIP: ima_restore_measurement_list+0xdc/0x45a
#PF: error_code(0x0000) – not-present page
Other architectures already validate the range with page_is_ram(), as done
in commit cbf9c4b9617b ("of: check previous kernel's ima-kexec-buffer
against memory bounds") do a similar check on x86.
Without carrying the measurement list across kexec, the attestation
would fail.
Link: https://lkml.kernel.org/r/20251231061609.907170-4-harshit.m.mogalapalli@oracle.com
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Fixes: b69a2afd5afc ("x86/kexec: Carry forward IMA measurement log on kexec")
Reported-by: Paul Webb <paul.x.webb@oracle.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Cc: Alexander Graf <graf@amazon.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Betkov <bp@alien8.de>
Cc: guoweikang <guoweikang.kernel@gmail.com>
Cc: Henry Willard <henry.willard@oracle.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Bohac <jbohac@suse.cz>
Cc: Joel Granados <joel.granados@kernel.org>
Cc: Jonathan McDowell <noodles@fb.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Sohil Mehta <sohil.mehta@intel.com>
Cc: Sourabh Jain <sourabhjain@linux.ibm.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Yifei Liu <yifei.l.liu@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 404d779466646bf1461f2090ff137e99acaecf42 ]
idmap lookups can time out while the cache is waiting for a userspace
upcall reply. In that case cache_check() returns -ETIMEDOUT to callers.
The nfsd_map_name_to_[ug]id functions currently proceed with attempting
to map the id to a kuid despite a potentially temporary failure to
perform the idmap lookup. This results in the code returning the error
NFSERR_BADOWNER which can cause client operations to return to userspace
with failure.
Fix this by returning the failure status before attempting kuid mapping.
This will return NFSERR_JUKEBOX on idmap lookup timeout so that clients
can retry the operation instead of aborting it.
Fixes: 65e10f6d0ab0 ("nfsd: Convert idmap to use kuids and kgids")
Cc: stable@vger.kernel.org
Signed-off-by: Anthony Iliopoulos <ailiop@suse.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 46ef85f854dfa9d5226b3c1c46493d79556c9589 ]
A General Protection Fault occurs in write_page() during array resize:
RIP: 0010:write_page+0x22b/0x3c0 [md_mod]
This is a use-after-free race between bitmap_daemon_work() and
__bitmap_resize(). The daemon iterates over `bitmap->storage.filemap`
without locking, while the resize path frees that storage via
md_bitmap_file_unmap(). `quiesce()` does not stop the md thread,
allowing concurrent access to freed pages.
Fix by holding `mddev->bitmap_info.mutex` during the bitmap update.
Link: https://lore.kernel.org/linux-raid/20260120102456.25169-1-jinpu.wang@ionos.com
Closes: https://lore.kernel.org/linux-raid/CAMGffE=Mbfp=7xD_hYxXk1PAaCZNSEAVeQGKGy7YF9f2S4=NEA@mail.gmail.com/T/#u
Cc: stable@vger.kernel.org
Fixes: d60b479d177a ("md/bitmap: add bitmap_resize function to allow bitmap resizing.")
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
pci_{primary/secondary}_epc_epf_unlink() functions
[ Upstream commit 8754dd7639ab0fd68c3ab9d91c7bdecc3e5740a8 ]
struct configfs_item_operations callbacks are defined like the following:
int (*allow_link)(struct config_item *src, struct config_item *target);
void (*drop_link)(struct config_item *src, struct config_item *target);
While pci_primary_epc_epf_link() and pci_secondary_epc_epf_link() specify
the parameters in the correct order, pci_primary_epc_epf_unlink() and
pci_secondary_epc_epf_unlink() specify the parameters in the wrong order,
leading to the below kernel crash when using the unlink command in
configfs:
Unable to handle kernel paging request at virtual address 0000000300000857
Mem abort info:
...
pc : string+0x54/0x14c
lr : vsnprintf+0x280/0x6e8
...
string+0x54/0x14c
vsnprintf+0x280/0x6e8
vprintk_default+0x38/0x4c
vprintk+0xc4/0xe0
pci_epf_unbind+0xdc/0x108
configfs_unlink+0xe0/0x208+0x44/0x74
vfs_unlink+0x120/0x29c
__arm64_sys_unlinkat+0x3c/0x90
invoke_syscall+0x48/0x134
do_el0_svc+0x1c/0x30prop.0+0xd0/0xf0
Fixes: e85a2d783762 ("PCI: endpoint: Add support in configfs to associate two EPCs with EPF")
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
[mani: cced stable, changed commit message as per https://lore.kernel.org/linux-pci/aV9joi3jF1R6ca02@ryzen]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260108062747.1870669-1-mmaddireddy@nvidia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 95d848dc7e639988dbb385a8cba9b484607cf98c ]
Add SRCU read-side protection when reading PDPTR registers in
__get_sregs2().
Reading PDPTRs may trigger access to guest memory:
kvm_pdptr_read() -> svm_cache_reg() -> load_pdptrs() ->
kvm_vcpu_read_guest_page() -> kvm_vcpu_gfn_to_memslot()
kvm_vcpu_gfn_to_memslot() dereferences memslots via __kvm_memslots(),
which uses srcu_dereference_check() and requires either kvm->srcu or
kvm->slots_lock to be held. Currently only vcpu->mutex is held,
triggering lockdep warning:
=============================
WARNING: suspicious RCU usage in kvm_vcpu_gfn_to_memslot
6.12.59+ #3 Not tainted
include/linux/kvm_host.h:1062 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by syz.5.1717/15100:
#0: ff1100002f4b00b0 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0x1d5/0x1590
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0xf0/0x120 lib/dump_stack.c:120
lockdep_rcu_suspicious+0x1e3/0x270 kernel/locking/lockdep.c:6824
__kvm_memslots include/linux/kvm_host.h:1062 [inline]
__kvm_memslots include/linux/kvm_host.h:1059 [inline]
kvm_vcpu_memslots include/linux/kvm_host.h:1076 [inline]
kvm_vcpu_gfn_to_memslot+0x518/0x5e0 virt/kvm/kvm_main.c:2617
kvm_vcpu_read_guest_page+0x27/0x50 virt/kvm/kvm_main.c:3302
load_pdptrs+0xff/0x4b0 arch/x86/kvm/x86.c:1065
svm_cache_reg+0x1c9/0x230 arch/x86/kvm/svm/svm.c:1688
kvm_pdptr_read arch/x86/kvm/kvm_cache_regs.h:141 [inline]
__get_sregs2 arch/x86/kvm/x86.c:11784 [inline]
kvm_arch_vcpu_ioctl+0x3e20/0x4aa0 arch/x86/kvm/x86.c:6279
kvm_vcpu_ioctl+0x856/0x1590 virt/kvm/kvm_main.c:4663
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl fs/ioctl.c:893 [inline]
__x64_sys_ioctl+0x18b/0x210 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xbd/0x1d0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Suggested-by: Sean Christopherson <seanjc@google.com>
Cc: stable@vger.kernel.org
Fixes: 6dba94035203 ("KVM: x86: Introduce KVM_GET_SREGS2 / KVM_SET_SREGS2")
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Link: https://patch.msgid.link/20260123222801.646123-1-kovalev@altlinux.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bd3138e8912c9db182eac5fed1337645a98b7a4f ]
In debugging other problems with generic/753, it turns out that it's
possible for the system go to down in the middle of a remote xattr set
operation such that the leaf block entry is marked incomplete and
valueblk is set to zero. Make this no longer a failure.
Cc: <stable@vger.kernel.org> # v4.15
Fixes: 13791d3b833428 ("xfs: scrub extended attribute leaf space")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3eefc0c2b78444b64feeb3783c017d6adc3cd3ce ]
xfs/592 and xfs/794 both trip this assertion in the leaf block freemap
adjustment code after ~20 minutes of running on my test VMs:
ASSERT(ichdr->firstused >= ichdr->count * sizeof(xfs_attr_leaf_entry_t)
+ xfs_attr3_leaf_hdr_size(leaf));
Upon enabling quite a lot more debugging code, I narrowed this down to
fsstress trying to set a local extended attribute with namelen=3 and
valuelen=71. This results in an entry size of 80 bytes.
At the start of xfs_attr3_leaf_add_work, the freemap looks like this:
i 0 base 448 size 0 rhs 448 count 46
i 1 base 388 size 132 rhs 448 count 46
i 2 base 2120 size 4 rhs 448 count 46
firstused = 520
where "rhs" is the first byte past the end of the leaf entry array.
This is inconsistent -- the entries array ends at byte 448, but
freemap[1] says there's free space starting at byte 388!
By the end of the function, the freemap is in worse shape:
i 0 base 456 size 0 rhs 456 count 47
i 1 base 388 size 52 rhs 456 count 47
i 2 base 2120 size 4 rhs 456 count 47
firstused = 440
Important note: 388 is not aligned with the entries array element size
of 8 bytes.
Based on the incorrect freemap, the name area starts at byte 440, which
is below the end of the entries array! That's why the assertion
triggers and the filesystem shuts down.
How did we end up here? First, recall from the previous patch that the
freemap array in an xattr leaf block is not intended to be a
comprehensive map of all free space in the leaf block. In other words,
it's perfectly legal to have a leaf block with:
* 376 bytes in use by the entries array
* freemap[0] has [base = 376, size = 8]
* freemap[1] has [base = 388, size = 1500]
* the space between 376 and 388 is free, but the freemap stopped
tracking that some time ago
If we add one xattr, the entries array grows to 384 bytes, and
freemap[0] becomes [base = 384, size = 0]. So far, so good. But if we
add a second xattr, the entries array grows to 392 bytes, and freemap[0]
gets pushed up to [base = 392, size = 0]. This is bad, because
freemap[1] hasn't been updated, and now the entries array and the free
space claim the same space.
The fix here is to adjust all freemap entries so that none of them
collide with the entries array. Note that this fix relies on commit
2a2b5932db6758 ("xfs: fix attr leaf header freemap.size underflow") and
the previous patch that resets zero length freemap entries to have
base = 0.
Cc: <stable@vger.kernel.org> # v2.6.12
Fixes: 1da177e4c3f415 ("Linux-2.6.12-rc2")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6f13c1d2a6271c2e73226864a0e83de2770b6f34 ]
Back in commit 2a2b5932db6758 ("xfs: fix attr leaf header freemap.size
underflow"), Brian Foster observed that it's possible for a small
freemap at the end of the end of the xattr entries array to experience
a size underflow when subtracting the space consumed by an expansion of
the entries array. There are only three freemap entries, which means
that it is not a complete index of all free space in the leaf block.
This code can leave behind a zero-length freemap entry with a nonzero
base. Subsequent setxattr operations can increase the base up to the
point that it overlaps with another freemap entry. This isn't in and of
itself a problem because the code in _leaf_add that finds free space
ignores any freemap entry with zero size.
However, there's another bug in the freemap update code in _leaf_add,
which is that it fails to update a freemap entry that begins midway
through the xattr entry that was just appended to the array. That can
result in the freemap containing two entries with the same base but
different sizes (0 for the "pushed-up" entry, nonzero for the entry
that's actually tracking free space). A subsequent _leaf_add can then
allocate xattr namevalue entries on top of the entries array, leading to
data loss. But fixing that is for later.
For now, eliminate the possibility of confusion by zeroing out the base
of any freemap entry that has zero size. Because the freemap is not
intended to be a complete index of free space, a subsequent failure to
find any free space for a new xattr will trigger block compaction, which
regenerates the freemap.
It looks like this bug has been in the codebase for quite a long time.
Cc: <stable@vger.kernel.org> # v2.6.12
Fixes: 1da177e4c3f415 ("Linux-2.6.12-rc2")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 20117c92bcf9c11afd64d7481d8f94fdf410726e ]
Manipulating a list in the kernel isn't safe without some sort of
mutual exclusion. Add a mutex any time we access / modify
'mfd_of_node_list' to prevent possible crashes.
Cc: stable@vger.kernel.org
Fixes: 466a62d7642f ("mfd: core: Make a best effort attempt to match devices with the correct of_nodes")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20251210113002.1.I6ceaca2cfb7eb25737012b166671f516696be4fd@changeid
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 10e60d87813989e20eac1f3eda30b3bae461e7f9 ]
Commit 4fc82cd907ac ("iommu/vt-d: Don't issue ATS Invalidation
request when device is disconnected") relies on
pci_dev_is_disconnected() to skip ATS invalidation for
safely-removed devices, but it does not cover link-down caused
by faults, which can still hard-lock the system.
For example, if a VM fails to connect to the PCIe device,
"virsh destroy" is executed to release resources and isolate
the fault, but a hard-lockup occurs while releasing the group fd.
Call Trace:
qi_submit_sync
qi_flush_dev_iotlb
intel_pasid_tear_down_entry
device_block_translation
blocking_domain_attach_dev
__iommu_attach_device
__iommu_device_set_domain
__iommu_group_set_domain_internal
iommu_detach_group
vfio_iommu_type1_detach_group
vfio_group_detach_container
vfio_group_fops_release
__fput
Although pci_device_is_present() is slower than
pci_dev_is_disconnected(), it still takes only ~70 µs on a
ConnectX-5 (8 GT/s, x2) and becomes even faster as PCIe speed
and width increase.
Besides, devtlb_invalidation_with_pasid() is called only in the
paths below, which are far less frequent than memory map/unmap.
1. mm-struct release
2. {attach,release}_dev
3. set/remove PASID
4. dirty-tracking setup
The gain in system stability far outweighs the negligible cost
of using pci_device_is_present() instead of pci_dev_is_disconnected()
to decide when to skip ATS invalidation, especially under GDR
high-load conditions.
Fixes: 4fc82cd907ac ("iommu/vt-d: Don't issue ATS Invalidation request when device is disconnected")
Cc: stable@vger.kernel.org
Signed-off-by: Jinhui Guo <guojinhui.liam@bytedance.com>
Link: https://lore.kernel.org/r/20251211035946.2071-3-guojinhui.liam@bytedance.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f39854a3fb2f06dc69b81ada002b641ba5b4696b ]
I learned a few things this year: first, blk_status_to_errno can return
ENODATA for critical media errors; and second, the scrub code doesn't
mark data structures as corrupt on ENODATA or EIO.
Currently, scrub failing to capture these errors isn't all that
impactful -- the checking code will exit to userspace with EIO/ENODATA,
and xfs_scrub will log a complaint and exit with nonzero status. Most
people treat fsck tools failing as a sign that the fs is corrupt, but
online fsck should mark the metadata bad and keep moving.
Cc: stable@vger.kernel.org # v4.15
Fixes: 4700d22980d459 ("xfs: create helpers to record and deal with scrub problems")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1aa1dd9cc595917882fb6db67725442956f79607 ]
charge_reserved_hugetlb.sh mounts a hugetlbfs instance at /mnt/huge with a
fixed size of 256M. On systems with large base hugepages (e.g. 512MB),
this is smaller than a single hugepage, so the hugetlbfs mount ends up
with zero capacity (often visible as size=0 in mount output).
As a result, write_to_hugetlbfs fails with ENOMEM and the test can hang
waiting for progress.
=== Error log ===
# uname -r
6.12.0-xxx.el10.aarch64+64k
#./charge_reserved_hugetlb.sh -cgroup-v2
# -----------------------------------------
...
# nr hugepages = 10
# writing cgroup limit: 5368709120
# writing reseravation limit: 5368709120
...
# write_to_hugetlbfs: Error mapping the file: Cannot allocate memory
# Waiting for hugetlb memory reservation to reach size 2684354560.
# 0
# Waiting for hugetlb memory reservation to reach size 2684354560.
# 0
...
# mount |grep /mnt/huge
none on /mnt/huge type hugetlbfs (rw,relatime,seclabel,pagesize=512M,size=0)
# grep -i huge /proc/meminfo
...
HugePages_Total: 10
HugePages_Free: 10
HugePages_Rsvd: 0
HugePages_Surp: 0
Hugepagesize: 524288 kB
Hugetlb: 5242880 kB
Drop the mount args with 'size=256M', so the filesystem capacity is sufficient
regardless of HugeTLB page size.
Link: https://lkml.kernel.org/r/20251221122639.3168038-3-liwang@redhat.com
Fixes: 29750f71a9b4 ("hugetlb_cgroup: add hugetlb_cgroup reservation tests")
Signed-off-by: Li Wang <liwang@redhat.com>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Acked-by: Waiman Long <longman@redhat.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9c9828d3ead69416d731b1238802af31760c823e ]
Since commit cc638f329ef6 ("mm, thp: tweak reclaim/compaction effort of
local-only and all-node allocations"), THP page fault allocations have
settled on the following scheme (from the commit log):
1. local node only THP allocation with no reclaim, just compaction.
2. for madvised VMA's or when synchronous compaction is enabled always - THP
allocation from any node with effort determined by global defrag setting
and VMA madvise
3. fallback to base pages on any node
Recent customer reports however revealed we have a gap in step 1 above.
What we have seen is excessive reclaim due to THP page faults on a NUMA
node that's close to its high watermark, while other nodes have plenty of
free memory.
The problem with step 1 is that it promises no reclaim after the
compaction attempt, however reclaim is only avoided for certain compaction
outcomes (deferred, or skipped due to insufficient free base pages), and
not e.g. when compaction is actually performed but fails (we did see
compact_fail vmstat counter increasing).
THP page faults can therefore exhibit a zone_reclaim_mode-like behavior,
which is not the intention.
Thus add a check for __GFP_THISNODE that corresponds to this exact
situation and prevents continuing with reclaim/compaction once the initial
compaction attempt isn't successful in allocating the page.
Note that commit cc638f329ef6 has not introduced this over-reclaim
possibility; it appears to exist in some form since commit 2f0799a0ffc0
("mm, thp: restore node-local hugepage allocations"). Followup commits
b39d0ee2632d ("mm, page_alloc: avoid expensive reclaim when compaction may
not succeed") and cc638f329ef6 have moved in the right direction, but left
the abovementioned gap.
Link: https://lkml.kernel.org/r/20251219-costly-noretry-thisnode-fix-v1-1-e1085a4a0c34@suse.cz
Fixes: 2f0799a0ffc0 ("mm, thp: restore node-local hugepage allocations")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Pedro Falcato <pfalcato@suse.de>
Acked-by: Zi Yan <ziy@nvidia.com>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: "David Hildenbrand (Red Hat)" <david@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a4b4385d0523e39a7c058cb5a6c8269e513126ca ]
drm_of_panel_bridge_remove() uses of_graph_get_remote_node() to get a
device_node but does not put the node reference.
Fixes: c70087e8f16f ("drm/drm_of: add drm_of_panel_bridge_remove function")
Cc: stable@vger.kernel.org # v4.15
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260109-drm-bridge-alloc-getput-drm_of_find_bridge-2-v2-1-8bad3ef90b9f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 93ecd6ee95c38cb533fa25f48d3c1c8cb69f410f ]
When hfi_session_flush is issued, all queued buffers are returned to
the V4L2 driver. Some of these buffers are not processed and have
bytesused = 0. Currently, the driver marks such buffers as error even
during drain operations, which can incorrectly flag EOS buffers.
Only capture buffers with zero payload (and not EOS) should be marked
with VB2_BUF_STATE_ERROR. The check is performed inside the non-EOS
branch to ensure correct handling.
Fixes: 51df3c81ba10b ("media: venus: vdec: Mark flushed buffers with error state")
Signed-off-by: Renjiang Han <renjiang.han@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b18247f9dab735c9c2d63823d28edc9011e7a1ad ]
Remove the redundant enabling of the hdmi_sound node in the Pinebook Pro
board dts file, because the HDMI output is unused on this device. [1][2]
This change also eliminates the following kernel log warning, which is
caused by the unenabled dependent node of hdmi_sound that ultimately
results in the node's probe failure:
platform hdmi-sound: deferred probe pending: asoc-simple-card: parse error
[1] https://files.pine64.org/doc/PinebookPro/pinebookpro_v2.1_mainboard_schematic.pdf
[2] https://files.pine64.org/doc/PinebookPro/pinebookpro_schematic_v21a_20220419.pdf
Cc: stable@vger.kernel.org
Fixes: 5a65505a69884 ("arm64: dts: rockchip: Add initial support for Pinebook Pro")
Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://patch.msgid.link/20260116151253.9223-1-jerrysteve1101@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 83c10e8dd43628d0bf86486616556cd749a3c310 ]
The "unstriped" device-mapper target incorrectly calculates the sector
offset on the mapped device when the target's origin is not zero.
Take for example this hypothetical concatenation of the members of a
two-disk RAID0:
linearized: 0 2097152 unstriped 2 128 0 /dev/md/raid0 0
linearized: 2097152 2097152 unstriped 2 128 1 /dev/md/raid0 0
The intent in this example is to create a single device named
/dev/mapper/linearized that comprises all of the chunks of the first disk
of the RAID0 set, followed by all of the chunks of the second disk of the
RAID0 set.
This fails because dm-unstripe.c's map_to_core function does its
computations based on the sector number within the mapper device rather
than the sector number within the target. The bug turns invisible when
the target's origin is at sector zero of the mapper device, as is the
common case. In the example above, however, what happens is that the
first half of the mapper device gets mapped correctly to the first disk
of the RAID0, but the second half of the mapper device gets mapped past
the end of the RAID0 device, and accesses to any of those sectors return
errors.
Signed-off-by: Matt Whitlock <kernel@mattwhitlock.name>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 18a5bf270532 ("dm: add unstriped target")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 118ba36e446c01e3cd34b3eedabf1d9436525e1d ]
There's a logic quirk in the handling of suspend in the bitmap mode:
This is the sequence of calls if we are reloading a dm-integrity table:
* dm_integrity_ctr reads a superblock with the flag SB_FLAG_DIRTY_BITMAP
set.
* dm_integrity_postsuspend initializes a journal and clears the flag
SB_FLAG_DIRTY_BITMAP.
* dm_integrity_resume sees the superblock with SB_FLAG_DIRTY_BITMAP set -
thus it interprets the journal as if it were a bitmap.
This quirk causes recalculation problem if the user increases the size of
the device in the bitmap mode.
Fix this by reading a fresh copy on the superblock in
dm_integrity_resume. This commit also fixes another logic quirk - the
branch that sets bitmap bits if the device was extended should only be
executed if the flag SB_FLAG_DIRTY_BITMAP is set.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Tested-by: Ondrej Kozina <okozina@redhat.com>
Fixes: 468dfca38b1a ("dm integrity: add a bitmap mode")
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 84d875e69818bed600edccb09be4a64b84a34a54 ]
On s390 PCI busses and slots with multiple functions may have holes
because PCI functions are passed-through by the hypervisor on a per
function basis and some functions may be in standby or reserved. This
fact is indicated by returning true from the
hypervisor_isolated_pci_functions() helper and triggers common code to
scan all possible devfn values. Via pci_scan_single_device() this in
turn causes config reads for the device and vendor IDs, even for PCI
functions which are in standby and thereofore disabled.
So far these futile config reads, as well as potentially writes, which
can never succeed were handled by the PCI load/store instructions
themselves. This works as the platform just returns an error for
a disabled and thus not usable function handle. It does cause spamming
of error logs and additional overhead though.
Instead check if the used function handle is enabled in zpci_cfg_load()
and zpci_cfg_write() and if not enable directly return -ENODEV. Also
refactor zpci_cfg_load() and zpci_cfg_store() slightly to accommodate
the new logic while meeting modern kernel style guidelines.
Cc: stable@vger.kernel.org
Fixes: a50297cf8235 ("s390/pci: separate zbus creation from scanning")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
tegra124_clk_register_emc()
[ Upstream commit fce0d0bd9c20fefd180ea9e8362d619182f97a1d ]
If clk_register() fails, call kfree to release "tegra".
Fixes: 2db04f16b589 ("clk: tegra: Add EMC clock driver")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ef9b3b4dbe767e4ac642a88dc0507927ac545047 ]
After discussion with the devicetree maintainers we agreed to not extend
lists with the generic compatible "apple,nco" anymore [1]. Use
"apple,t8103-nco" as base compatible as it is the SoC the driver and
bindings were written for.
[1]: https://lore.kernel.org/asahi/12ab93b7-1fc2-4ce0-926e-c8141cfe81bf@kernel.org/
Fixes: 6641057d5dba ("clk: clk-apple-nco: Add driver for Apple NCO")
Cc: stable@vger.kernel.org
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 127ccae2c185f62e6ecb4bf24f9cb307e9b9c619 ]
Commit cc3ed80ae69f ("KVM: nSVM: always use vmcb01 to for vmsave/vmload
of guest state") made KVM always use vmcb01 for the fields controlled by
VMSAVE/VMLOAD, but it missed updating the VMLOAD/VMSAVE emulation code
to always use vmcb01.
As a result, if VMSAVE/VMLOAD is executed by an L2 guest and is not
intercepted by L1, KVM will mistakenly use vmcb02. Always use vmcb01
instead of the current VMCB.
Fixes: cc3ed80ae69f ("KVM: nSVM: always use vmcb01 to for vmsave/vmload of guest state")
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Link: https://patch.msgid.link/20260110004821.3411245-2-yosry.ahmed@linux.dev
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 80db65d4acfb9ff12d00172aed39ea8b98261aad ]
In the pruss_clk_mux_setup(), the devm_add_action_or_reset() indirectly
calls pruss_of_free_clk_provider(), which calls of_node_put(clk_mux_np)
on the error path. However, after the devm_add_action_or_reset()
returns, the of_node_put(clk_mux_np) is called again, causing a double
free.
Fix by returning directly, to avoid the duplicate of_node_put().
Fixes: ba59c9b43c86 ("soc: ti: pruss: support CORECLK_MUX and IEPCLK_MUX")
Cc: stable@vger.kernel.org
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20260113014716.2464741-1-vulab@iscas.ac.cn
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c933138d45176780fabbbe7da263e04d5b3e525d ]
The mmio regmap allocated during probe is never freed.
Switch to using the device managed allocator so that the regmap is
released on probe failures (e.g. probe deferral) and on driver unbind.
Fixes: a5caf03188e4 ("soc: ti: k3-socinfo: Do not use syscon helper to build regmap")
Cc: stable@vger.kernel.org # 6.15
Cc: Andrew Davis <afd@ti.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20251127134942.2121-1-johan@kernel.org
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fb8a6c18fb9a6561f7a15b58b272442b77a242dd ]
Stale rq->bio values have been observed to cause double-initialization of
cloned bios in request-based device-mapper targets, leading to
use-after-free and double-free scenarios.
One such case occurs when using dm-multipath on top of a PCIe NVMe
namespace, where cloned request bios are freed during
blk_complete_request(), but rq->bio is left intact. Subsequent clone
teardown then attempts to free the same bios again via
blk_rq_unprep_clone().
The resulting double-free path looks like:
nvme_pci_complete_batch()
nvme_complete_batch()
blk_mq_end_request_batch()
blk_complete_request() // called on a DM clone request
bio_endio() // first free of all clone bios
...
rq->end_io() // end_clone_request()
dm_complete_request(tio->orig)
dm_softirq_done()
dm_done()
dm_end_request()
blk_rq_unprep_clone() // second free of clone bios
Fix this by clearing the clone request's bio pointer when the last cloned
bio completes, ensuring that later teardown paths do not attempt to free
already-released bios.
Signed-off-by: Michael Liang <mliang@purestorage.com>
Reviewed-by: Mohamed Khalfella <mkhalfella@purestorage.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c698b7f417801fcd79f0dc844250b3361d38e6b8 ]
If we send a write followed by a discard, it may be possible that the
discarded data end up being overwritten by the previous write from the
journal. The code tries to prevent that, but there was a typo in this
logic that made it not being activated as it should be.
Note that if we end up here the second time (when discard_retried is
true), it means that the write bio is actually racing with the discard
bio, and in this situation it is not specified which of them should win.
Cc: stable@vger.kernel.org
Fixes: 31843edab7cb ("dm integrity: improve discard in journal mode")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 973e42fd5d2b397bff34f0c249014902dbf65912 ]
__v4l2_ctrl_handler_setup() and __v4l2_ctrl_modify_range() contains an
assertion to verify that the v4l2_ctrl_handler::lock is held, as it should
only be called when the lock has already been acquired. Therefore use our
own mutex for the ctrl lock, otherwise a warning will be reported.
Fixes: 4974c2f19fd8 ("media: ov5647: Support gain, exposure and AWB controls")
Cc: stable@vger.kernel.org
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
[Sakari Ailus: Fix a minor conflict.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c063632b494b02e891442d10f17e37b7fcfab9b3 ]
The pixel rate for VGA (640x480) mode is configured in the mode's table
to be 58.333 MPix/s instead of 55 MPix/s, so fix it.
Fixes: 911f4516ee2b ("media: ov5647: Support V4L2_CID_PIXEL_RATE")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/CAPY8ntA2TCf9FuB6Nk%2BOn%2By6N_PMuYPAOAr3Yx8YESwe4skWvw@mail.gmail.com/
Suggested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f007586b1e89dcea40168415d0422cb7a0fc31b1 ]
As this sensor captures RAW bayer frames, the colorspace should be
V4L2_COLORSPACE_RAW instead of SRGB.
Fixes: a8df5af695a1 ("media: ov5647: Add SGGBR10_1X10 modes")
Cc: stable@vger.kernel.org
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1438248c5a82c86b4e1f0311c3bb827af747a8cf ]
Trial and error reveals that the minimum vblank value appears to be 24
(the OV5647 data sheet does not give any clues). This fixes streaming
lock-ups in full resolution mode.
Fixes: 2512c06441e3 ("media: ov5647: Support V4L2_CID_VBLANK control")
Cc: stable@vger.kernel.org
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a4e62e597f21bb37db0ad13aca486094e9188167 ]
The top offset in the pixel array is actually 6 (see page 3-1 of the
OV5647 data sheet).
Fixes: 14f70a3232aa ("media: ov5647: Add support for get_selection()")
Cc: stable@vger.kernel.org
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit eee13cbccacb6d0a3120c126b8544030905b069d ]
In ov5647_init_controls() we call v4l2_get_subdevdata, but it is
initialized by v4l2_i2c_subdev_init() in the probe, which currently
happens after init_controls(). This can result in a segfault if the
error condition is hit, and we try to access i2c_client, so fix the
order.
Fixes: 4974c2f19fd8 ("media: ov5647: Support gain, exposure and AWB controls")
Cc: stable@vger.kernel.org
Suggested-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 679f0b7b6a409750a25754c8833e268e5fdde742 ]
Calculating maximum M for scaler configuration involves dividing by
MIN_X_OUTPUT_SIZE limit register's value. Albeit the value is presumably
non-zero, the driver was missing the check it in fact was. Fix this.
Reported-by: Josh Poimboeuf <jpoimboe@kernel.org>
Closes: https://lore.kernel.org/all/ahukd6b3wonye3zgtptvwzvrxldcruazs2exfvll6etjhmcxyj@vq3eh6pd375b/
Fixes: ccfc97bdb5ae ("[media] smiapp: Add driver")
Cc: stable@vger.kernel.org # for 5.15 and later
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org> # build
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cad237b6c875fbee5d353a2b289e98d240d17ec8 ]
In one of the error paths in tw9906_probe(), the memory allocated in
v4l2_ctrl_handler_init() and v4l2_ctrl_new_std() is not freed. Fix that
by calling v4l2_ctrl_handler_free() on the handler in that error path.
Cc: stable@vger.kernel.org
Fixes: a000e9a02b58 ("[media] tw9906: add Techwell tw9906 video decoder")
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9cea16fea47e5553f51d10957677ff735b1eff03 ]
In one of the error paths in tw9903_probe(), the memory allocated in
v4l2_ctrl_handler_init() and v4l2_ctrl_new_std() is not freed. Fix that
by calling v4l2_ctrl_handler_free() on the handler in that error path.
Cc: stable@vger.kernel.org
Fixes: 0890ec19c65d ("[media] tw9903: add new tw9903 video decoder")
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 863f50d583445c3c8b28a0fc4bb9c18fd9656f41 ]
In error path, add cx25821_alsa_dma_unmap() to release the
resource acquired by cx25821_alsa_dma_map()
Fixes: 8d8e6d6005de ("[media] cx28521: drop videobuf abuse in cx25821-alsa")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 141c81849fab2ad4d6e3fdaff7cbaa873e8b5eb2 ]
In error path, add cx23885_alsa_dma_unmap() to release the
resource acquired by cx23885_alsa_dma_map().
Fixes: 9529a4b0cf49 ("[media] cx23885: drop videobuf abuse in cx23885-alsa")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit dbc527d980f7ba8559de38f8c1e4158c71a78915 ]
In error path, add cx88_alsa_dma_unmap() to release
resource acquired by cx88_alsa_dma_map().
Fixes: b2c75abde0de ("[media] cx88: drop videobuf abuse in cx88-alsa")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b8bf939d77c0cd01118e953bbf554e0fa15e9006 ]
Fix a memory leak in usb_keene_probe(). The v4l2 control handler is
initialized and controls are added, but if v4l2_device_register() or
video_register_device() fails afterward, the handler was never freed,
leaking memory.
Add v4l2_ctrl_handler_free() call in the err_v4l2 error path to ensure
the control handler is properly freed for all error paths after it is
initialized.
Reported-by: syzbot+a41b73dce23962a74c72@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=a41b73dce23962a74c72
Fixes: 1bf20c3a0c61 ("[media] radio-keene: add a driver for the Keene FM Transmitter")
Cc: stable@vger.kernel.org
Signed-off-by: Shaurya Rane <ssrane_b23@ee.vjti.ac.in>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1547d41f9f19d691c2c9ce4c29f746297baef9e9 ]
Do not crash when a report has no fields.
Fake USB gadgets can send their own HID report descriptors and can define report
structures without valid fields. This can be used to crash the kernel over USB.
Cc: stable@vger.kernel.org
Signed-off-by: Günther Noack <gnoack@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cee8337e1bad168136aecfe6416ecd7d3aa7529a ]
Fake USB devices can send their own report descriptors for which the
input_mapping() hook does not get called. In this case, pm->input_ep82 stays
NULL, which leads to a crash later.
This does not happen with the real device, but can be provoked by imposing as
one.
Cc: stable@vger.kernel.org
Signed-off-by: Günther Noack <gnoack@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 17abd396548035fbd6179ee1a431bd75d49676a7 ]
Fake USB devices can send their own report descriptors for which the
input_mapping() hook does not get called. In this case, msc->input stays NULL,
leading to a crash at a later time.
Detect this condition in the input_configured() hook and reject the device.
This is not supposed to happen with actual magic mouse devices, but can be
provoked by imposing as a magic mouse USB device.
Cc: stable@vger.kernel.org
Signed-off-by: Günther Noack <gnoack@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3756a272d2cf356d2203da8474d173257f5f8521 ]
Errors in init must be reported back or we'll
follow a NULL pointer the first time FF is used.
Fixes: 20eb127906709 ("hid: force feedback driver for PantherLord USB/PS2 2in1 Adapter")
Cc: stable@vger.kernel.org
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f22c81bebf8bda6e54dc132df0ed54f6bf8756f9 ]
The arm64 kernel doesn't boot with annotated branches
(PROFILE_ANNOTATED_BRANCHES) enabled and CONFIG_DEBUG_VIRTUAL together.
Bisecting it, I found that disabling branch profiling in arch/arm64/mm
solved the problem. Narrowing down a bit further, I found that
physaddr.c is the file that needs to have branch profiling disabled to
get the machine to boot.
I suspect that it might invoke some ftrace helper very early in the boot
process and ftrace is still not enabled(!?).
Rather than playing whack-a-mole with individual files, disable branch
profiling for the entire arch/arm64 tree, similar to what x86 already
does in arch/x86/Kbuild.
Cc: stable@vger.kernel.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fc3ba56385d03501eb582e4b86691ba378e556f9 ]
Drop the WARN in svm_set_nested_state() on nested_svm_load_cr3() failing
as it is trivially easy to trigger from userspace by modifying CPUID after
loading CR3. E.g. modifying the state restoration selftest like so:
--- tools/testing/selftests/kvm/x86/state_test.c
+++ tools/testing/selftests/kvm/x86/state_test.c
@@ -280,7 +280,16 @@ int main(int argc, char *argv[])
/* Restore state in a new VM. */
vcpu = vm_recreate_with_one_vcpu(vm);
- vcpu_load_state(vcpu, state);
+
+ if (stage == 4) {
+ state->sregs.cr3 = BIT(44);
+ vcpu_load_state(vcpu, state);
+
+ vcpu_set_cpuid_property(vcpu, X86_PROPERTY_MAX_PHY_ADDR, 36);
+ __vcpu_nested_state_set(vcpu, &state->nested);
+ } else {
+ vcpu_load_state(vcpu, state);
+ }
/*
* Restore XSAVE state in a dummy vCPU, first without doing
generates:
WARNING: CPU: 30 PID: 938 at arch/x86/kvm/svm/nested.c:1877 svm_set_nested_state+0x34a/0x360 [kvm_amd]
Modules linked in: kvm_amd kvm irqbypass [last unloaded: kvm]
CPU: 30 UID: 1000 PID: 938 Comm: state_test Tainted: G W 6.18.0-rc7-58e10b63777d-next-vm
Tainted: [W]=WARN
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:svm_set_nested_state+0x34a/0x360 [kvm_amd]
Call Trace:
<TASK>
kvm_arch_vcpu_ioctl+0xf33/0x1700 [kvm]
kvm_vcpu_ioctl+0x4e6/0x8f0 [kvm]
__x64_sys_ioctl+0x8f/0xd0
do_syscall_64+0x61/0xad0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Simply delete the WARN instead of trying to prevent userspace from shoving
"illegal" state into CR3. For better or worse, KVM's ABI allows userspace
to set CPUID after SREGS, and vice versa, and KVM is very permissive when
it comes to guest CPUID. I.e. attempting to enforce the virtual CPU model
when setting CPUID could break userspace. Given that the WARN doesn't
provide any meaningful protection for KVM or benefit for userspace, simply
drop it even though the odds of breaking userspace are minuscule.
Opportunistically delete a spurious newline.
Fixes: b222b0b88162 ("KVM: nSVM: refactor the CR3 reload on migration")
Cc: stable@vger.kernel.org
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Reviewed-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Link: https://patch.msgid.link/20251216161755.1775409-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 93a04ab480c8bbcb7d9004be139c538c8a0c1bc8 ]
The of_get_child_by_name() function increments the reference count
of child nodes, causing multiple reference leaks in omap_control_init():
1. scm_conf node never released in normal/error paths
2. clocks node leak when checking existence
3. Missing scm_conf release before np in error paths
Fix these leaks by adding proper of_node_put() calls and separate error
handling.
Fixes: e5b635742e98 ("ARM: OMAP2+: control: add syscon support for register accesses")
Cc: stable@vger.kernel.org
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://patch.msgid.link/20251217142122.1861292-1-vulab@iscas.ac.cn
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
