summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-01-27ALSA: jack: Add missing rwsem around snd_ctl_remove() callsTakashi Iwai
[ Upstream commit 06764dc931848c3a9bc01a63bbf76a605408bb54 ] snd_ctl_remove() has to be called with card->controls_rwsem held (when called after the card instantiation). This patch add the missing rwsem calls around it. Fixes: 9058cbe1eed2 ("ALSA: jack: implement kctl creating for jack devices") Link: https://lore.kernel.org/r/20211116071314.15065-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27ext4: avoid trim error on fs with small groupsJan Kara
[ Upstream commit 173b6e383d2a204c9921ffc1eca3b87aa2106c33 ] A user reported FITRIM ioctl failing for him on ext4 on some devices without apparent reason. After some debugging we've found out that these devices (being LVM volumes) report rather large discard granularity of 42MB and the filesystem had 1k blocksize and thus group size of 8MB. Because ext4 FITRIM implementation puts discard granularity into minlen, ext4_trim_fs() declared the trim request as invalid. However just silently doing nothing seems to be a more appropriate reaction to such combination of parameters since user did not specify anything wrong. CC: Lukas Czerner <lczerner@redhat.com> Fixes: 5c2ed62fd447 ("ext4: Adjust minlen with discard_granularity in the FITRIM ioctl") Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20211112152202.26614-1-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27net: mcs7830: handle usb read errors properlyPavel Skripkin
[ Upstream commit d668769eb9c52b150753f1653f7f5a0aeb8239d2 ] Syzbot reported uninit value in mcs7830_bind(). The problem was in missing validation check for bytes read via usbnet_read_cmd(). usbnet_read_cmd() internally calls usb_control_msg(), that returns number of bytes read. Code should validate that requested number of bytes was actually read. So, this patch adds missing size validation check inside mcs7830_get_reg() to prevent uninit value bugs Reported-and-tested-by: syzbot+003c0a286b9af5412510@syzkaller.appspotmail.com Fixes: 2a36d7083438 ("USB: driver for mcs7830 (aka DeLOCK) USB ethernet adapter") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20220106225716.7425-1-paskripkin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27pcmcia: fix setting of kthread task statesDominik Brodowski
[ Upstream commit fbb3485f1f931102d8ba606f1c28123f5b48afa3 ] We need to set TASK_INTERRUPTIBLE before calling kthread_should_stop(). Otherwise, kthread_stop() might see that the pccardd thread is still in TASK_RUNNING state and fail to wake it up. Additionally, we only need to set the state back to TASK_RUNNING if kthread_should_stop() breaks the loop. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Fixes: d3046ba809ce ("pcmcia: fix a boot time warning in pcmcia cs code") Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27can: xilinx_can: xcan_probe(): check for error irqJiasheng Jiang
[ Upstream commit c6564c13dae25cd7f8e1de5127b4da4500ee5844 ] For the possible failure of the platform_get_irq(), the returned irq could be error number and will finally cause the failure of the request_irq(). Consider that platform_get_irq() can now in certain cases return -EPROBE_DEFER, and the consequences of letting request_irq() effectively convert that into -EINVAL, even at probe time rather than later on. So it might be better to check just now. Fixes: b1201e44f50b ("can: xilinx CAN controller support") Link: https://lore.kernel.org/all/20211224021324.1447494-1-jiasheng@iscas.ac.cn Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27can: softing: softing_startstop(): fix set but not used variable warningMarc Kleine-Budde
[ Upstream commit 370d988cc529598ebaec6487d4f84c2115dc696b ] In the function softing_startstop() the variable error_reporting is assigned but not used. The code that uses this variable is commented out. Its stated that the functionality is not finally verified. To fix the warning: | drivers/net/can/softing/softing_fw.c:424:9: error: variable 'error_reporting' set but not used [-Werror,-Wunused-but-set-variable] remove the comment, activate the code, but add a "0 &&" to the if expression and rely on the optimizer rather than the preprocessor to remove the code. Link: https://lore.kernel.org/all/20220109103126.1872833-1-mkl@pengutronix.de Fixes: 03fd3cf5a179 ("can: add driver for Softing card") Cc: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27spi: spi-meson-spifc: Add missing pm_runtime_disable() in meson_spifc_probeMiaoqian Lin
[ Upstream commit 69c1b87516e327a60b39f96b778fe683259408bf ] If the probe fails, we should use pm_runtime_disable() to balance pm_runtime_enable(). Add missing pm_runtime_disable() for meson_spifc_probe. Fixes: c3e4bc5434d2 ("spi: meson: Add support for Amlogic Meson SPIFC") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220107075424.7774-1-linmq006@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27ppp: ensure minimum packet size in ppp_write()Eric Dumazet
[ Upstream commit 44073187990d5629804ce0627525f6ea5cfef171 ] It seems pretty clear ppp layer assumed user space would always be kind to provide enough data in their write() to a ppp device. This patch makes sure user provides at least 2 bytes. It adds PPP_PROTO_LEN macro that could replace in net-next many occurrences of hard-coded 2 value. I replaced only one occurrence to ease backports to stable kernels. The bug manifests in the following report: BUG: KMSAN: uninit-value in ppp_send_frame+0x28d/0x27c0 drivers/net/ppp/ppp_generic.c:1740 ppp_send_frame+0x28d/0x27c0 drivers/net/ppp/ppp_generic.c:1740 __ppp_xmit_process+0x23e/0x4b0 drivers/net/ppp/ppp_generic.c:1640 ppp_xmit_process+0x1fe/0x480 drivers/net/ppp/ppp_generic.c:1661 ppp_write+0x5cb/0x5e0 drivers/net/ppp/ppp_generic.c:513 do_iter_write+0xb0c/0x1500 fs/read_write.c:853 vfs_writev fs/read_write.c:924 [inline] do_writev+0x645/0xe00 fs/read_write.c:967 __do_sys_writev fs/read_write.c:1040 [inline] __se_sys_writev fs/read_write.c:1037 [inline] __x64_sys_writev+0xe5/0x120 fs/read_write.c:1037 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Uninit was created at: slab_post_alloc_hook mm/slab.h:524 [inline] slab_alloc_node mm/slub.c:3251 [inline] __kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4974 kmalloc_reserve net/core/skbuff.c:354 [inline] __alloc_skb+0x545/0xf90 net/core/skbuff.c:426 alloc_skb include/linux/skbuff.h:1126 [inline] ppp_write+0x11d/0x5e0 drivers/net/ppp/ppp_generic.c:501 do_iter_write+0xb0c/0x1500 fs/read_write.c:853 vfs_writev fs/read_write.c:924 [inline] do_writev+0x645/0xe00 fs/read_write.c:967 __do_sys_writev fs/read_write.c:1040 [inline] __se_sys_writev fs/read_write.c:1037 [inline] __x64_sys_writev+0xe5/0x120 fs/read_write.c:1037 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Paul Mackerras <paulus@samba.org> Cc: linux-ppp@vger.kernel.org Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27pcmcia: rsrc_nonstatic: Fix a NULL pointer dereference in ↵Zhou Qingyang
nonstatic_find_mem_region() [ Upstream commit 977d2e7c63c3d04d07ba340b39987742e3241554 ] In nonstatic_find_mem_region(), pcmcia_make_resource() is assigned to res and used in pci_bus_alloc_resource(). There a dereference of res in pci_bus_alloc_resource(), which could lead to a NULL pointer dereference on failure of pcmcia_make_resource(). Fix this bug by adding a check of res. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_PCCARD_NONSTATIC=y show no new warnings, and our static analyzer no longer warns about this code. Fixes: 49b1153adfe1 ("pcmcia: move all pcmcia_resource_ops providers into one module") Signed-off-by: Zhou Qingyang <zhou1615@umn.edu> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27pcmcia: rsrc_nonstatic: Fix a NULL pointer dereference in ↵Zhou Qingyang
__nonstatic_find_io_region() [ Upstream commit ca0fe0d7c35c97528bdf621fdca75f13157c27af ] In __nonstatic_find_io_region(), pcmcia_make_resource() is assigned to res and used in pci_bus_alloc_resource(). There is a dereference of res in pci_bus_alloc_resource(), which could lead to a NULL pointer dereference on failure of pcmcia_make_resource(). Fix this bug by adding a check of res. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_PCCARD_NONSTATIC=y show no new warnings, and our static analyzer no longer warns about this code. Fixes: 49b1153adfe1 ("pcmcia: move all pcmcia_resource_ops providers into one module") Signed-off-by: Zhou Qingyang <zhou1615@umn.edu> [linux@dominikbrodowski.net: Fix typo in commit message] Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27usb: ftdi-elan: fix memory leak on device disconnectWei Yongjun
[ Upstream commit 1646566b5e0c556f779180a8514e521ac735de1e ] 'ftdi' is alloced when probe device, but not free on device disconnect, this cause a memory leak as follows: unreferenced object 0xffff88800d584000 (size 8400): comm "kworker/0:2", pid 3809, jiffies 4295453055 (age 13.784s) hex dump (first 32 bytes): 00 40 58 0d 80 88 ff ff 00 40 58 0d 80 88 ff ff .@X......@X..... 00 00 00 00 00 00 00 00 00 00 00 00 ad 4e ad de .............N.. backtrace: [<000000000d47f947>] kmalloc_order_trace+0x19/0x110 mm/slab_common.c:960 [<000000008548ac68>] ftdi_elan_probe+0x8c/0x880 drivers/usb/misc/ftdi-elan.c:2647 [<000000007f73e422>] usb_probe_interface+0x31b/0x800 drivers/usb/core/driver.c:396 [<00000000fe8d07fc>] really_probe+0x299/0xc30 drivers/base/dd.c:517 [<0000000005da7d32>] __driver_probe_device+0x357/0x500 drivers/base/dd.c:751 [<000000003c2c9579>] driver_probe_device+0x4e/0x140 drivers/base/dd.c:781 Fix it by freeing 'ftdi' after nobody use it. Fixes: a5c66e4b2418 ("USB: ftdi-elan: client driver for ELAN Uxxx adapters") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20211217083428.2441-1-weiyongjun1@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27media: msi001: fix possible null-ptr-deref in msi001_probe()Wang Hai
[ Upstream commit 3d5831a40d3464eea158180eb12cbd81c5edfb6a ] I got a null-ptr-deref report: BUG: kernel NULL pointer dereference, address: 0000000000000060 ... RIP: 0010:v4l2_ctrl_auto_cluster+0x57/0x270 ... Call Trace: msi001_probe+0x13b/0x24b [msi001] spi_probe+0xeb/0x130 ... do_syscall_64+0x35/0xb0 In msi001_probe(), if the creation of control for bandwidth_auto fails, there will be a null-ptr-deref issue when it is used in v4l2_ctrl_auto_cluster(). Check dev->hdl.error before v4l2_ctrl_auto_cluster() to fix this bug. Link: https://lore.kernel.org/linux-media/20211026112348.2878040-1-wanghai38@huawei.com Fixes: 93203dd6c7c4 ("[media] msi001: Mirics MSi001 silicon tuner driver") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27media: saa7146: mxb: Fix a NULL pointer dereference in mxb_attach()Zhou Qingyang
[ Upstream commit 0407c49ebe330333478440157c640fffd986f41b ] In mxb_attach(dev, info), saa7146_vv_init() is called to allocate a new memory for dev->vv_data. saa7146_vv_release() will be called on failure of mxb_probe(dev). There is a dereference of dev->vv_data in saa7146_vv_release(), which could lead to a NULL pointer dereference on failure of saa7146_vv_init(). Fix this bug by adding a check of saa7146_vv_init(). This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_VIDEO_MXB=m show no new warnings, and our static analyzer no longer warns about this code. Fixes: 03b1930efd3c ("V4L/DVB: saa7146: fix regression of the av7110/budget-av driver") Signed-off-by: Zhou Qingyang <zhou1615@umn.edu> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27media: dib8000: Fix a memleak in dib8000_init()Zhou Qingyang
[ Upstream commit 8dbdcc7269a83305ee9d677b75064d3530a48ee2 ] In dib8000_init(), the variable fe is not freed or passed out on the failure of dib8000_identify(&state->i2c), which could lead to a memleak. Fix this bug by adding a kfree of fe in the error path. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_DVB_DIB8000=m show no new warnings, and our static analyzer no longer warns about this code. Fixes: 77e2c0f5d471 ("V4L/DVB (12900): DiB8000: added support for DiBcom ISDB-T/ISDB-Tsb demodulator DiB8000") Signed-off-by: Zhou Qingyang <zhou1615@umn.edu> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27floppy: Fix hang in watchdog when disk is ejectedTasos Sahanidis
[ Upstream commit fb48febce7e30baed94dd791e19521abd2c3fd83 ] When the watchdog detects a disk change, it calls cancel_activity(), which in turn tries to cancel the fd_timer delayed work. In the above scenario, fd_timer_fn is set to fd_watchdog(), meaning it is trying to cancel its own work. This results in a hang as cancel_delayed_work_sync() is waiting for the watchdog (itself) to return, which never happens. This can be reproduced relatively consistently by attempting to read a broken floppy, and ejecting it while IO is being attempted and retried. To resolve this, this patch calls cancel_delayed_work() instead, which cancels the work without waiting for the watchdog to return and finish. Before this regression was introduced, the code in this section used del_timer(), and not del_timer_sync() to delete the watchdog timer. Link: https://lore.kernel.org/r/399e486c-6540-db27-76aa-7a271b061f76@tasossah.com Fixes: 070ad7e793dc ("floppy: convert to delayed work and single-thread wq") Signed-off-by: Tasos Sahanidis <tasos@tasossah.com> Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27serial: amba-pl011: do not request memory region twiceLino Sanfilippo
[ Upstream commit d1180405c7b5c7a1c6bde79d5fc24fe931430737 ] With commit 3873e2d7f63a ("drivers: PL011: refactor pl011_probe()") the function devm_ioremap() called from pl011_setup_port() was replaced with devm_ioremap_resource(). Since this function not only remaps but also requests the ports io memory region it now collides with the .config_port() callback which requests the same region at uart port registration. Since devm_ioremap_resource() already claims the memory successfully, the request in .config_port() fails. Later at uart port deregistration the attempt to release the unclaimed memory also fails. The failure results in a “Trying to free nonexistent resource" warning. Fix these issues by removing the callbacks that implement the redundant memory allocation/release. Also make sure that changing the drivers io memory base address via TIOCSSERIAL is not allowed any more. Fixes: 3873e2d7f63a ("drivers: PL011: refactor pl011_probe()") Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Link: https://lore.kernel.org/r/20211129174238.8333-1-LinoSanfilippo@gmx.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27drm/amdgpu: Fix a NULL pointer dereference in amdgpu_connector_lcd_native_mode()Zhou Qingyang
[ Upstream commit b220110e4cd442156f36e1d9b4914bb9e87b0d00 ] In amdgpu_connector_lcd_native_mode(), the return value of drm_mode_duplicate() is assigned to mode, and there is a dereference of it in amdgpu_connector_lcd_native_mode(), which will lead to a NULL pointer dereference on failure of drm_mode_duplicate(). Fix this bug add a check of mode. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_DRM_AMDGPU=m show no new warnings, and our static analyzer no longer warns about this code. Fixes: d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)") Signed-off-by: Zhou Qingyang <zhou1615@umn.edu> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27arm64: dts: qcom: msm8916: fix MMC controller aliasesDmitry Baryshkov
[ Upstream commit b0293c19d42f6d6951c2fab9a47fed50baf2c14d ] Change sdhcN aliases to mmcN to make them actually work. Currently the board uses non-standard aliases sdhcN, which do not work, resulting in mmc0 and mmc1 hosts randomly changing indices between boots. Fixes: c4da5a561627 ("arm64: dts: qcom: Add msm8916 sdhci configuration nodes") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211201020559.1611890-1-dmitry.baryshkov@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27netfilter: bridge: add support for pppoe filteringFlorian Westphal
[ Upstream commit 28b78ecffea8078d81466b2e01bb5a154509f1ba ] This makes 'bridge-nf-filter-pppoe-tagged' sysctl work for bridged traffic. Looking at the original commit it doesn't appear this ever worked: static unsigned int br_nf_post_routing(unsigned int hook, struct sk_buff **pskb, [..] if (skb->protocol == htons(ETH_P_8021Q)) { skb_pull(skb, VLAN_HLEN); skb->network_header += VLAN_HLEN; + } else if (skb->protocol == htons(ETH_P_PPP_SES)) { + skb_pull(skb, PPPOE_SES_HLEN); + skb->network_header += PPPOE_SES_HLEN; } [..] NF_HOOK(... POST_ROUTING, ...) ... but the adjusted offsets are never restored. The alternative would be to rip this code out for good, but otoh we'd have to keep this anyway for the vlan handling (which works because vlan tag info is in the skb, not the packet payload). Reported-and-tested-by: Amish Chana <amish@3g.co.za> Fixes: 516299d2f5b6f97 ("[NETFILTER]: bridge-nf: filter bridged IPv4/IPv6 encapsulated in pppoe traffic") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27tty: serial: atmel: Call dma_async_issue_pending()Tudor Ambarus
[ Upstream commit 4f4b9b5895614eb2e2b5f4cab7858f44bd113e1b ] The driver wrongly assummed that tx_submit() will start the transfer, which is not the case, now that the at_xdmac driver is fixed. tx_submit is supposed to push the current transaction descriptor to a pending queue, waiting for issue_pending to be called. issue_pending must start the transfer, not tx_submit. Fixes: 34df42f59a60 ("serial: at91: add rx dma support") Fixes: 08f738be88bb ("serial: at91: add tx dma support") Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20211125090028.786832-4-tudor.ambarus@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27tty: serial: atmel: Check return code of dmaengine_submit()Tudor Ambarus
[ Upstream commit 1e67bd2b8cb90b66e89562598e9c2046246832d3 ] The tx_submit() method of struct dma_async_tx_descriptor is entitled to do sanity checks and return errors if encountered. It's not the case for the DMA controller drivers that this client is using (at_h/xdmac), because they currently don't do sanity checks and always return a positive cookie at tx_submit() method. In case the controller drivers will implement sanity checks and return errors, print a message so that the client will be informed that something went wrong at tx_submit() level. Fixes: 08f738be88bb ("serial: at91: add tx dma support") Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Acked-by: Richard Genoud <richard.genoud@gmail.com> Link: https://lore.kernel.org/r/20211125090028.786832-3-tudor.ambarus@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27crypto: qce - fix uaf on qce_ahash_register_oneChengfeng Ye
[ Upstream commit b4cb4d31631912842eb7dce02b4350cbb7562d5e ] Pointer base points to sub field of tmpl, it is dereferenced after tmpl is freed. Fix this by accessing base before free tmpl. Fixes: ec8f5d8f ("crypto: qce - Qualcomm crypto engine driver") Signed-off-by: Chengfeng Ye <cyeaa@connect.ust.hk> Acked-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27Bluetooth: stop proccessing malicious adv dataPavel Skripkin
[ Upstream commit 3a56ef719f0b9682afb8a86d64b2399e36faa4e6 ] Syzbot reported slab-out-of-bounds read in hci_le_adv_report_evt(). The problem was in missing validaion check. We should check if data is not malicious and we can read next data block. If we won't check ptr validness, code can read a way beyond skb->end and it can cause problems, of course. Fixes: e95beb414168 ("Bluetooth: hci_le_adv_report_evt code refactoring") Reported-and-tested-by: syzbot+e3fcb9c4f3c2a931dc40@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27Bluetooth: cmtp: fix possible panic when cmtp_init_sockets() failsWang Hai
[ Upstream commit 2a7ca7459d905febf519163bd9e3eed894de6bb7 ] I got a kernel BUG report when doing fault injection test: ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:45! ... RIP: 0010:__list_del_entry_valid.cold+0x12/0x4d ... Call Trace: proto_unregister+0x83/0x220 cmtp_cleanup_sockets+0x37/0x40 [cmtp] cmtp_exit+0xe/0x1f [cmtp] do_syscall_64+0x35/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae If cmtp_init_sockets() in cmtp_init() fails, cmtp_init() still returns success. This will cause a kernel bug when accessing uncreated ctmp related data when the module exits. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27PCI: Add function 1 DMA alias quirk for Marvell 88SE9125 SATA controllerYifeng Li
commit e445375882883f69018aa669b67cbb37ec873406 upstream. Like other SATA controller chips in the Marvell 88SE91xx series, the Marvell 88SE9125 has the same DMA requester ID hardware bug that prevents it from working under IOMMU. Add it to the list of devices that need the quirk. Without this patch, device initialization fails with DMA errors: ata8: softreset failed (1st FIS failed) DMAR: DRHD: handling fault status reg 2 DMAR: [DMA Write NO_PASID] Request device [03:00.1] fault addr 0xfffc0000 [fault reason 0x02] Present bit in context entry is clear DMAR: DRHD: handling fault status reg 2 DMAR: [DMA Read NO_PASID] Request device [03:00.1] fault addr 0xfffc0000 [fault reason 0x02] Present bit in context entry is clear After applying the patch, the controller can be successfully initialized: ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 330) ata8.00: ATAPI: PIONEER BD-RW BDR-207M, 1.21, max UDMA/100 ata8.00: configured for UDMA/100 scsi 7:0:0:0: CD-ROM PIONEER BD-RW BDR-207M 1.21 PQ: 0 ANSI: 5 Link: https://lore.kernel.org/r/YahpKVR+McJVDdkD@work Reported-by: Sam Bingner <sam@bingner.com> Tested-by: Sam Bingner <sam@bingner.com> Tested-by: Yifeng Li <tomli@tomli.me> Signed-off-by: Yifeng Li <tomli@tomli.me> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27can: softing_cs: softingcs_probe(): fix memleak on registration failureJohan Hovold
commit ced4913efb0acc844ed65cc01d091a85d83a2082 upstream. In case device registration fails during probe, the driver state and the embedded platform device structure needs to be freed using platform_device_put() to properly free all resources (e.g. the device name). Fixes: 0a0b7a5f7a04 ("can: add driver for Softing card") Link: https://lore.kernel.org/all/20211222104843.6105-1-johan@kernel.org Cc: stable@vger.kernel.org # 2.6.38 Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27media: stk1160: fix control-message timeoutsJohan Hovold
commit 6aa6e70cdb5b863a57bad61310bf89b6617a5d2d upstream. USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Fixes: 9cb2173e6ea8 ("[media] media: Add stk1160 new driver (easycap replacement)") Cc: stable@vger.kernel.org # 3.7 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27media: pvrusb2: fix control-message timeoutsJohan Hovold
commit b82bf9b9dc305d7d3d93eab106d70dbf2171b43e upstream. USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Fixes: d855497edbfb ("V4L/DVB (4228a): pvrusb2 to kernel 2.6.18") Cc: stable@vger.kernel.org # 2.6.18 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27media: dib0700: fix undefined behavior in tuner shutdownMichael Kuron
commit f7b77ebe6d2f49c7747b2d619586d1aa33f9ea91 upstream. This fixes a problem where closing the tuner would leave it in a state where it would not tune to any channel when reopened. This problem was discovered as part of https://github.com/hselasky/webcamd/issues/16. Since adap->id is 0 or 1, this bit-shift overflows, which is undefined behavior. The driver still worked in practice as the overflow would in most environments result in 0, which rendered the line a no-op. When running the driver as part of webcamd however, the overflow could lead to 0xff due to optimizations by the compiler, which would, in the end, improperly shut down the tuner. The bug is a regression introduced in the commit referenced below. The present patch causes identical behavior to before that commit for adap->id equal to 0 or 1. The driver does not contain support for dib0700 devices with more adapters, assuming such even exist. Tests have been performed with the Xbox One Digital TV Tuner on amd64. Not all dib0700 devices are expected to be affected by the regression; this code path is only taken by those with incorrect endpoint numbers. Link: https://lore.kernel.org/linux-media/1d2fc36d94ced6f67c7cc21dcc469d5e5bdd8201.1632689033.git.mchehab+huawei@kernel.org Cc: stable@vger.kernel.org Fixes: 7757ddda6f4f ("[media] DiB0700: add function to change I2C-speed") Signed-off-by: Michael Kuron <michael.kuron@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27media: em28xx: fix control-message timeoutsJohan Hovold
commit d9b7e8df3aa9b8c10708aab60e72e79ac08237e4 upstream. USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Fixes: a6c2ba283565 ("[PATCH] v4l: 716: support for em28xx board family") Cc: stable@vger.kernel.org # 2.6.16 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27media: mceusb: fix control-message timeoutsJohan Hovold
commit 16394e998cbb050730536bdf7e89f5a70efbd974 upstream. USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Fixes: 66e89522aff7 ("V4L/DVB: IR: add mceusb IR receiver driver") Cc: stable@vger.kernel.org # 2.6.36 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27rtc: cmos: take rtc_lock while reading from CMOSMateusz Jończyk
commit 454f47ff464325223129b9b5b8d0b61946ec704d upstream. Reading from the CMOS involves writing to the index register and then reading from the data register. Therefore access to the CMOS has to be serialized with rtc_lock. This invocation of CMOS_READ was not serialized, which could cause trouble when other code is accessing CMOS at the same time. Use spin_lock_irq() like the rest of the function. Nothing in kernel modifies the RTC_DM_BINARY bit, so there could be a separate pair of spin_lock_irq() / spin_unlock_irq() before doing the math. Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl> Reviewed-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: stable@vger.kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211210200131.153887-2-mat.jonczyk@o2.pl Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27nfc: llcp: fix NULL error pointer dereference on sendmsg() after failed bind()Krzysztof Kozlowski
commit dded08927ca3c31a5c37f8e7f95fe98770475dd4 upstream. Syzbot detected a NULL pointer dereference of nfc_llcp_sock->dev pointer (which is a 'struct nfc_dev *') with calls to llcp_sock_sendmsg() after a failed llcp_sock_bind(). The message being sent is a SOCK_DGRAM. KASAN report: BUG: KASAN: null-ptr-deref in nfc_alloc_send_skb+0x2d/0xc0 Read of size 4 at addr 00000000000005c8 by task llcp_sock_nfc_a/899 CPU: 5 PID: 899 Comm: llcp_sock_nfc_a Not tainted 5.16.0-rc6-next-20211224-00001-gc6437fbf18b0 #125 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x45/0x59 ? nfc_alloc_send_skb+0x2d/0xc0 __kasan_report.cold+0x117/0x11c ? mark_lock+0x480/0x4f0 ? nfc_alloc_send_skb+0x2d/0xc0 kasan_report+0x38/0x50 nfc_alloc_send_skb+0x2d/0xc0 nfc_llcp_send_ui_frame+0x18c/0x2a0 ? nfc_llcp_send_i_frame+0x230/0x230 ? __local_bh_enable_ip+0x86/0xe0 ? llcp_sock_connect+0x470/0x470 ? llcp_sock_connect+0x470/0x470 sock_sendmsg+0x8e/0xa0 ____sys_sendmsg+0x253/0x3f0 ... The issue was visible only with multiple simultaneous calls to bind() and sendmsg(), which resulted in most of the bind() calls to fail. The bind() was failing on checking if there is available WKS/SDP/SAP (respective bit in 'struct nfc_llcp_local' fields). When there was no available WKS/SDP/SAP, the bind returned error but the sendmsg() to such socket was able to trigger mentioned NULL pointer dereference of nfc_llcp_sock->dev. The code looks simply racy and currently it protects several paths against race with checks for (!nfc_llcp_sock->local) which is NULL-ified in error paths of bind(). The llcp_sock_sendmsg() did not have such check but called function nfc_llcp_send_ui_frame() had, although not protected with lock_sock(). Therefore the race could look like (same socket is used all the time): CPU0 CPU1 ==== ==== llcp_sock_bind() - lock_sock() - success - release_sock() - return 0 llcp_sock_sendmsg() - lock_sock() - release_sock() llcp_sock_bind(), same socket - lock_sock() - error - nfc_llcp_send_ui_frame() - if (!llcp_sock->local) - llcp_sock->local = NULL - nfc_put_device(dev) - dereference llcp_sock->dev - release_sock() - return -ERRNO The nfc_llcp_send_ui_frame() checked llcp_sock->local outside of the lock, which is racy and ineffective check. Instead, its caller llcp_sock_sendmsg(), should perform the check inside lock_sock(). Reported-and-tested-by: syzbot+7f23bcddf626e0593a39@syzkaller.appspotmail.com Fixes: b874dec21d1c ("NFC: Implement LLCP connection less Tx path") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27HID: uhid: Fix worker destroying device without any protectionJann Horn
commit 4ea5763fb79ed89b3bdad455ebf3f33416a81624 upstream. uhid has to run hid_add_device() from workqueue context while allowing parallel use of the userspace API (which is protected with ->devlock). But hid_add_device() can fail. Currently, that is handled by immediately destroying the associated HID device, without using ->devlock - but if there are concurrent requests from userspace, that's wrong and leads to NULL dereferences and/or memory corruption (via use-after-free). Fix it by leaving the HID device as-is in the worker. We can clean it up later, either in the UHID_DESTROY command handler or in the ->release() handler. Cc: stable@vger.kernel.org Fixes: 67f8ecc550b5 ("HID: uhid: fix timeout when probe races with IO") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27rtlwifi: rtl8192cu: Fix WARNING when calling local_irq_restore() with ↵Larry Finger
interrupts enabled commit 8b144dedb928e4e2f433a328d58f44c3c098d63e upstream. Syzbot reports the following WARNING: [200~raw_local_irq_restore() called with IRQs enabled WARNING: CPU: 1 PID: 1206 at kernel/locking/irqflag-debug.c:10 warn_bogus_irq_restore+0x1d/0x20 kernel/locking/irqflag-debug.c:10 Hardware initialization for the rtl8188cu can run for as long as 350 ms, and the routine may be called with interrupts disabled. To avoid locking the machine for this long, the current routine saves the interrupt flags and enables local interrupts. The problem is that it restores the flags at the end without disabling local interrupts first. This patch fixes commit a53268be0cb9 ("rtlwifi: rtl8192cu: Fix too long disable of IRQs"). Reported-by: syzbot+cce1ee31614c171f5595@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Fixes: a53268be0cb9 ("rtlwifi: rtl8192cu: Fix too long disable of IRQs") Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211215171105.20623-1-Larry.Finger@lwfinger.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27media: uvcvideo: fix division by zero at stream startJohan Hovold
commit 8aa637bf6d70d2fb2ad4d708d8b9dd02b1c095df upstream. Add the missing bulk-endpoint max-packet sanity check to uvc_video_start_transfer() to avoid division by zero in uvc_alloc_urb_buffers() in case a malicious device has broken descriptors (or when doing descriptor fuzz testing). Note that USB core will reject URBs submitted for endpoints with zero wMaxPacketSize but that drivers doing packet-size calculations still need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip endpoint descriptors with maxpacket=0")). Fixes: c0efd232929c ("V4L/DVB (8145a): USB Video Class driver") Cc: stable@vger.kernel.org # 2.6.26 Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27drm/i915: Avoid bitwise vs logical OR warning in snb_wm_latency_quirk()Nathan Chancellor
commit 2e70570656adfe1c5d9a29940faa348d5f132199 upstream. A new warning in clang points out a place in this file where a bitwise OR is being used with boolean types: drivers/gpu/drm/i915/intel_pm.c:3066:12: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical] changed = ilk_increase_wm_latency(dev_priv, dev_priv->wm.pri_latency, 12) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ This construct is intentional, as it allows every one of the calls to ilk_increase_wm_latency() to occur (instead of short circuiting with logical OR) while still caring about the result of each call. To make this clearer to the compiler, use the '|=' operator to assign the result of each ilk_increase_wm_latency() call to changed, which keeps the meaning of the code the same but makes it obvious that every one of these calls is expected to happen. Link: https://github.com/ClangBuiltLinux/linux/issues/1473 Reported-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Suggested-by: Dávid Bolvanský <david.bolvansky@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211014211916.3550122-1-nathan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27can: gs_usb: gs_can_start_xmit(): zero-initialize hf->{flags,reserved}Brian Silverman
commit 89d58aebe14a365c25ba6645414afdbf4e41cea4 upstream. No information is deliberately sent in hf->flags in host -> device communications, but the open-source candleLight firmware echoes it back, which can result in the GS_CAN_FLAG_OVERFLOW flag being set and generating spurious ERRORFRAMEs. While there also initialize the reserved member with 0. Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Link: https://lore.kernel.org/all/20220106002952.25883-1-brian.silverman@bluerivertech.com Link: https://github.com/candle-usb/candleLight_fw/issues/87 Cc: stable@vger.kernel.org Signed-off-by: Brian Silverman <brian.silverman@bluerivertech.com> [mkl: initialize the reserved member, too] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27can: gs_usb: fix use of uninitialized variable, detach device on reception ↵Marc Kleine-Budde
of invalid USB data commit 4a8737ff068724f509d583fef404d349adba80d6 upstream. The received data contains the channel the received data is associated with. If the channel number is bigger than the actual number of channels assume broken or malicious USB device and shut it down. This fixes the error found by clang: | drivers/net/can/usb/gs_usb.c:386:6: error: variable 'dev' is used | uninitialized whenever 'if' condition is true | if (hf->channel >= GS_MAX_INTF) | ^~~~~~~~~~~~~~~~~~~~~~~~~~ | drivers/net/can/usb/gs_usb.c:474:10: note: uninitialized use occurs here | hf, dev->gs_hf_size, gs_usb_receive_bulk_callback, | ^~~ Link: https://lore.kernel.org/all/20211210091158.408326-1-mkl@pengutronix.de Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27mfd: intel-lpss: Fix too early PM enablement in the ACPI ->probe()Andy Shevchenko
commit c9e143084d1a602f829115612e1ec79df3727c8b upstream. The runtime PM callback may be called as soon as the runtime PM facility is enabled and activated. It means that ->suspend() may be called before we finish probing the device in the ACPI case. Hence, NULL pointer dereference: intel-lpss INT34BA:00: IRQ index 0 not found BUG: kernel NULL pointer dereference, address: 0000000000000030 ... Workqueue: pm pm_runtime_work RIP: 0010:intel_lpss_suspend+0xb/0x40 [intel_lpss] To fix this, first try to register the device and only after that enable runtime PM facility. Fixes: 4b45efe85263 ("mfd: Add support for Intel Sunrisepoint LPSS devices") Reported-by: Orlando Chamberlain <redecorating@protonmail.com> Reported-by: Aditya Garg <gargaditya08@live.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Aditya Garg <gargaditya08@live.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20211101190008.86473-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27USB: Fix "slab-out-of-bounds Write" bug in usb_hcd_poll_rh_statusAlan Stern
commit 1d7d4c07932e04355d6e6528d44a2f2c9e354346 upstream. When the USB core code for getting root-hub status reports was originally written, it was assumed that the hub driver would be its only caller. But this isn't true now; user programs can use usbfs to communicate with root hubs and get status reports. When they do this, they may use a transfer_buffer that is smaller than the data returned by the HCD, which will lead to a buffer overflow error when usb_hcd_poll_rh_status() tries to store the status data. This was discovered by syzbot: BUG: KASAN: slab-out-of-bounds in memcpy include/linux/fortify-string.h:225 [inline] BUG: KASAN: slab-out-of-bounds in usb_hcd_poll_rh_status+0x5f4/0x780 drivers/usb/core/hcd.c:776 Write of size 2 at addr ffff88801da403c0 by task syz-executor133/4062 This patch fixes the bug by reducing the amount of status data if it won't fit in the transfer_buffer. If some data gets discarded then the URB's completion status is set to -EOVERFLOW rather than 0, to let the user know what happened. Reported-and-tested-by: syzbot+3ae6a2b06f131ab9849f@syzkaller.appspotmail.com Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/Yc+3UIQJ2STbxNua@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27USB: core: Fix bug in resuming hub's handling of wakeup requestsAlan Stern
commit 0f663729bb4afc92a9986b66131ebd5b8a9254d1 upstream. Bugzilla #213839 reports a 7-port hub that doesn't work properly when devices are plugged into some of the ports; the kernel goes into an unending disconnect/reinitialize loop as shown in the bug report. This "7-port hub" comprises two four-port hubs with one plugged into the other; the failures occur when a device is plugged into one of the downstream hub's ports. (These hubs have other problems too. For example, they bill themselves as USB-2.0 compliant but they only run at full speed.) It turns out that the failures are caused by bugs in both the kernel and the hub. The hub's bug is that it reports a different bmAttributes value in its configuration descriptor following a remote wakeup (0xe0 before, 0xc0 after -- the wakeup-support bit has changed). The kernel's bug is inside the hub driver's resume handler. When hub_activate() sees that one of the hub's downstream ports got a wakeup request from a child device, it notes this fact by setting the corresponding bit in the hub->change_bits variable. But this variable is meant for connection changes, not wakeup events; setting it causes the driver to believe the downstream port has been disconnected and then connected again (in addition to having received a wakeup request). Because of this, the hub driver then tries to check whether the device currently plugged into the downstream port is the same as the device that had been attached there before. Normally this check succeeds and wakeup handling continues with no harm done (which is why the bug remained undetected until now). But with these dodgy hubs, the check fails because the config descriptor has changed. This causes the hub driver to reinitialize the child device, leading to the disconnect/reinitialize loop described in the bug report. The proper way to note reception of a downstream wakeup request is to set a bit in the hub->event_bits variable instead of hub->change_bits. That way the hub driver will realize that something has happened to the port but will not think the port and child device have been disconnected. This patch makes that change. Cc: <stable@vger.kernel.org> Tested-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/YdCw7nSfWYPKWQoD@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27Bluetooth: bfusb: fix division by zero in send pathJohan Hovold
commit b5e6fa7a12572c82f1e7f2f51fbb02a322291291 upstream. Add the missing bulk-out endpoint sanity check to probe() to avoid division by zero in bfusb_send_frame() in case a malicious device has broken descriptors (or when doing descriptor fuzz testing). Note that USB core will reject URBs submitted for endpoints with zero wMaxPacketSize but that drivers doing packet-size calculations still need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip endpoint descriptors with maxpacket=0")). Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-11Linux 4.4.299Greg Kroah-Hartman
Link: https://lore.kernel.org/r/20220110071811.779189823@linuxfoundation.org Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Pavel Machek (CIP) <pavel@denx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-11power: reset: ltc2952: Fix use of floating point literalsNathan Chancellor
commit 644106cdb89844be2496b21175b7c0c2e0fab381 upstream. A new commit in LLVM causes an error on the use of 'long double' when '-mno-x87' is used, which the kernel does through an alias, '-mno-80387' (see the LLVM commit below for more details around why it does this). drivers/power/reset/ltc2952-poweroff.c:162:28: error: expression requires 'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it data->wde_interval = 300L * 1E6L; ^ drivers/power/reset/ltc2952-poweroff.c:162:21: error: expression requires 'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it data->wde_interval = 300L * 1E6L; ^ drivers/power/reset/ltc2952-poweroff.c:163:41: error: expression requires 'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it data->trigger_delay = ktime_set(2, 500L*1E6L); ^ 3 errors generated. This happens due to the use of a 'long double' literal. The 'E6' part of '1E6L' causes the literal to be a 'double' then the 'L' suffix promotes it to 'long double'. There is no visible reason for floating point values in this driver, as the values are only assigned to integer types. Use NSEC_PER_MSEC, which is the same integer value as '1E6L', to avoid changing functionality but fix the error. Fixes: 6647156c00cc ("power: reset: add LTC2952 poweroff driver") Link: https://github.com/ClangBuiltLinux/linux/issues/1497 Link: https://github.com/llvm/llvm-project/commit/a8083d42b1c346e21623a1d36d1f0cadd7801d83 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> [nathan: Resolve conflict due to lack of 8b0e195314fab] Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-11mISDN: change function names to avoid conflictswolfgang huang
[ Upstream commit 8b5fdfc57cc2471179d1c51081424ded833c16c8 ] As we build for mips, we meet following error. l1_init error with multiple definition. Some architecture devices usually marked with l1, l2, lxx as the start-up phase. so we change the mISDN function names, align with Isdnl2_xxx. mips-linux-gnu-ld: drivers/isdn/mISDN/layer1.o: in function `l1_init': (.text+0x890): multiple definition of `l1_init'; \ arch/mips/kernel/bmips_5xxx_init.o:(.text+0xf0): first defined here make[1]: *** [home/mips/kernel-build/linux/Makefile:1161: vmlinux] Error 1 Signed-off-by: wolfgang huang <huangjinhui@kylinos.cn> Reported-by: k2ci <kernel-bot@kylinos.cn> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-11net: udp: fix alignment problem in udp4_seq_show()yangxingwu
[ Upstream commit 6c25449e1a32c594d743df8e8258e8ef870b6a77 ] $ cat /pro/net/udp before: sl local_address rem_address st tx_queue rx_queue tr tm->when 26050: 0100007F:0035 00000000:0000 07 00000000:00000000 00:00000000 26320: 0100007F:0143 00000000:0000 07 00000000:00000000 00:00000000 27135: 00000000:8472 00000000:0000 07 00000000:00000000 00:00000000 after: sl local_address rem_address st tx_queue rx_queue tr tm->when 26050: 0100007F:0035 00000000:0000 07 00000000:00000000 00:00000000 26320: 0100007F:0143 00000000:0000 07 00000000:00000000 00:00000000 27135: 00000000:8472 00000000:0000 07 00000000:00000000 00:00000000 Signed-off-by: yangxingwu <xingwu.yang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-11ip6_vti: initialize __ip6_tnl_parm struct in vti6_siocdevprivateWilliam Zhao
[ Upstream commit c1833c3964d5bd8c163bd4e01736a38bc473cb8a ] The "__ip6_tnl_parm" struct was left uninitialized causing an invalid load of random data when the "__ip6_tnl_parm" struct was used elsewhere. As an example, in the function "ip6_tnl_xmit_ctl()", it tries to access the "collect_md" member. With "__ip6_tnl_parm" being uninitialized and containing random data, the UBSAN detected that "collect_md" held a non-boolean value. The UBSAN issue is as follows: =============================================================== UBSAN: invalid-load in net/ipv6/ip6_tunnel.c:1025:14 load of value 30 is not a valid value for type '_Bool' CPU: 1 PID: 228 Comm: kworker/1:3 Not tainted 5.16.0-rc4+ #8 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 Workqueue: ipv6_addrconf addrconf_dad_work Call Trace: <TASK> dump_stack_lvl+0x44/0x57 ubsan_epilogue+0x5/0x40 __ubsan_handle_load_invalid_value+0x66/0x70 ? __cpuhp_setup_state+0x1d3/0x210 ip6_tnl_xmit_ctl.cold.52+0x2c/0x6f [ip6_tunnel] vti6_tnl_xmit+0x79c/0x1e96 [ip6_vti] ? lock_is_held_type+0xd9/0x130 ? vti6_rcv+0x100/0x100 [ip6_vti] ? lock_is_held_type+0xd9/0x130 ? rcu_read_lock_bh_held+0xc0/0xc0 ? lock_acquired+0x262/0xb10 dev_hard_start_xmit+0x1e6/0x820 __dev_queue_xmit+0x2079/0x3340 ? mark_lock.part.52+0xf7/0x1050 ? netdev_core_pick_tx+0x290/0x290 ? kvm_clock_read+0x14/0x30 ? kvm_sched_clock_read+0x5/0x10 ? sched_clock_cpu+0x15/0x200 ? find_held_lock+0x3a/0x1c0 ? lock_release+0x42f/0xc90 ? lock_downgrade+0x6b0/0x6b0 ? mark_held_locks+0xb7/0x120 ? neigh_connected_output+0x31f/0x470 ? lockdep_hardirqs_on+0x79/0x100 ? neigh_connected_output+0x31f/0x470 ? ip6_finish_output2+0x9b0/0x1d90 ? rcu_read_lock_bh_held+0x62/0xc0 ? ip6_finish_output2+0x9b0/0x1d90 ip6_finish_output2+0x9b0/0x1d90 ? ip6_append_data+0x330/0x330 ? ip6_mtu+0x166/0x370 ? __ip6_finish_output+0x1ad/0xfb0 ? nf_hook_slow+0xa6/0x170 ip6_output+0x1fb/0x710 ? nf_hook.constprop.32+0x317/0x430 ? ip6_finish_output+0x180/0x180 ? __ip6_finish_output+0xfb0/0xfb0 ? lock_is_held_type+0xd9/0x130 ndisc_send_skb+0xb33/0x1590 ? __sk_mem_raise_allocated+0x11cf/0x1560 ? dst_output+0x4a0/0x4a0 ? ndisc_send_rs+0x432/0x610 addrconf_dad_completed+0x30c/0xbb0 ? addrconf_rs_timer+0x650/0x650 ? addrconf_dad_work+0x73c/0x10e0 addrconf_dad_work+0x73c/0x10e0 ? addrconf_dad_completed+0xbb0/0xbb0 ? rcu_read_lock_sched_held+0xaf/0xe0 ? rcu_read_lock_bh_held+0xc0/0xc0 process_one_work+0x97b/0x1740 ? pwq_dec_nr_in_flight+0x270/0x270 worker_thread+0x87/0xbf0 ? process_one_work+0x1740/0x1740 kthread+0x3ac/0x490 ? set_kthread_struct+0x100/0x100 ret_from_fork+0x22/0x30 </TASK> =============================================================== The solution is to initialize "__ip6_tnl_parm" struct to zeros in the "vti6_siocdevprivate()" function. Signed-off-by: William Zhao <wizhao@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-11scsi: libiscsi: Fix UAF in iscsi_conn_get_param()/iscsi_conn_teardown()Lixiaokeng
[ Upstream commit 1b8d0300a3e9f216ae4901bab886db7299899ec6 ] |- iscsi_if_destroy_conn |-dev_attr_show |-iscsi_conn_teardown |-spin_lock_bh |-iscsi_sw_tcp_conn_get_param |-kfree(conn->persistent_address) |-iscsi_conn_get_param |-kfree(conn->local_ipaddr) ==>|-read persistent_address ==>|-read local_ipaddr |-spin_unlock_bh When iscsi_conn_teardown() and iscsi_conn_get_param() happen in parallel, a UAF may be triggered. Link: https://lore.kernel.org/r/046ec8a0-ce95-d3fc-3235-666a7c65b224@huawei.com Reported-by: Lu Tixiong <lutianxiong@huawei.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Lixiaokeng <lixiaokeng@huawei.com> Signed-off-by: Linfeilong <linfeilong@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-11phonet: refcount leak in pep_sock_accepHangyu Hua
commit bcd0f93353326954817a4f9fa55ec57fb38acbb0 upstream. sock_hold(sk) is invoked in pep_sock_accept(), but __sock_put(sk) is not invoked in subsequent failure branches(pep_accept_conn() != 0). Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Link: https://lore.kernel.org/r/20211209082839.33985-1-hbh25y@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Aayush Agarwal <aayush.a.agarwal@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.46.0) at 2026-04-14 20:06:44 +0000