5 files changed, 34 insertions, 6 deletions
diff --git a/include/uapi/linux/dma-buf.h b/include/uapi/linux/dma-buf.h
index 5a6fda66d9ad..e827c9d20c5d 100644
--- a/include/uapi/linux/dma-buf.h
+++ b/include/uapi/linux/dma-buf.h
@@ -20,6 +20,7 @@
 #ifndef _DMA_BUF_UAPI_H_
 #define _DMA_BUF_UAPI_H_
 
+#include <linux/ioctl.h>
 #include <linux/types.h>
 
 /**
diff --git a/include/uapi/linux/io_uring.h b/include/uapi/linux/io_uring.h
index 6750c383a2ab..1ff16141c8a5 100644
--- a/include/uapi/linux/io_uring.h
+++ b/include/uapi/linux/io_uring.h
@@ -188,7 +188,8 @@ enum io_uring_sqe_flags_bit {
 /*
  * If COOP_TASKRUN is set, get notified if task work is available for
  * running and a kernel transition would be needed to run it. This sets
- * IORING_SQ_TASKRUN in the sq ring flags. Not valid with COOP_TASKRUN.
+ * IORING_SQ_TASKRUN in the sq ring flags. Not valid without COOP_TASKRUN
+ * or DEFER_TASKRUN.
  */
 #define IORING_SETUP_TASKRUN_FLAG	(1U << 9)
 #define IORING_SETUP_SQE128		(1U << 10) /* SQEs are 128 byte */
diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h
index 65500f5db379..80364d4dbebb 100644
--- a/include/uapi/linux/kvm.h
+++ b/include/uapi/linux/kvm.h
@@ -14,6 +14,10 @@
 #include <linux/ioctl.h>
 #include <asm/kvm.h>
 
+#ifdef __KERNEL__
+#include <linux/kvm_types.h>
+#endif
+
 #define KVM_API_VERSION 12
 
 /*
@@ -1601,7 +1605,11 @@ struct kvm_stats_desc {
 	__u16 size;
 	__u32 offset;
 	__u32 bucket_size;
+#ifdef __KERNEL__
+	char name[KVM_STATS_NAME_SIZE];
+#else
 	char name[];
+#endif
 };
 
 #define KVM_GET_STATS_FD  _IO(KVMIO,  0xce)
diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
index ec1c54b5a310..14f634ab9350 100644
--- a/include/uapi/linux/pci_regs.h
+++ b/include/uapi/linux/pci_regs.h
@@ -712,7 +712,7 @@
 #define  PCI_EXP_LNKCTL2_HASD		0x0020 /* HW Autonomous Speed Disable */
 #define PCI_EXP_LNKSTA2		0x32	/* Link Status 2 */
 #define  PCI_EXP_LNKSTA2_FLIT		0x0400 /* Flit Mode Status */
-#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2	0x32	/* end of v2 EPs w/ link */
+#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2	0x34	/* end of v2 EPs w/ link */
 #define PCI_EXP_SLTCAP2		0x34	/* Slot Capabilities 2 */
 #define  PCI_EXP_SLTCAP2_IBPD	0x00000001 /* In-band PD Disable Supported */
 #define PCI_EXP_SLTCTL2		0x38	/* Slot Control 2 */
diff --git a/include/uapi/linux/rseq.h b/include/uapi/linux/rseq.h
index 863c4a00a66b..f69344fe6c08 100644
--- a/include/uapi/linux/rseq.h
+++ b/include/uapi/linux/rseq.h
@@ -87,10 +87,17 @@ struct rseq_slice_ctrl {
 };
 
 /*
- * struct rseq is aligned on 4 * 8 bytes to ensure it is always
- * contained within a single cache-line.
+ * The original size and alignment of the allocation for struct rseq is
+ * 32 bytes.
  *
- * A single struct rseq per thread is allowed.
+ * The allocation size needs to be greater or equal to
+ * max(getauxval(AT_RSEQ_FEATURE_SIZE), 32), and the allocation needs to
+ * be aligned on max(getauxval(AT_RSEQ_ALIGN), 32).
+ *
+ * As an alternative, userspace is allowed to use both the original size
+ * and alignment of 32 bytes for backward compatibility.
+ *
+ * A single active struct rseq registration per thread is allowed.
  */
 struct rseq {
 	/*
@@ -181,9 +188,20 @@ struct rseq {
 	struct rseq_slice_ctrl slice_ctrl;
 
 	/*
+	 * Before rseq became extensible, its original size was 32 bytes even
+	 * though the active rseq area was only 20 bytes.
+	 * Exposing a 32 bytes feature size would make life needlessly painful
+	 * for userspace. Therefore, add a reserved byte after byte 32
+	 * to bump the rseq feature size from 32 to 33.
+	 * The next field to be added to the rseq area will be larger
+	 * than one byte, and will replace this reserved byte.
+	 */
+	__u8 __reserved;
+
+	/*
 	 * Flexible array member at end of structure, after last feature field.
 	 */
 	char end[];
-} __attribute__((aligned(4 * sizeof(__u64))));
+} __attribute__((aligned(32)));
 
 #endif /* _UAPI_LINUX_RSEQ_H */