diff options
Diffstat (limited to 'include/uapi/linux')
| -rw-r--r-- | include/uapi/linux/blkpg.h | 28 | ||||
| -rw-r--r-- | include/uapi/linux/bpf.h | 16 | ||||
| -rw-r--r-- | include/uapi/linux/fuse.h | 3 | ||||
| -rw-r--r-- | include/uapi/linux/kvm.h | 46 | ||||
| -rw-r--r-- | include/uapi/linux/psample.h | 5 |
5 files changed, 61 insertions, 37 deletions
diff --git a/include/uapi/linux/blkpg.h b/include/uapi/linux/blkpg.h index ac6474e4f29d..d0a64ee97c6d 100644 --- a/include/uapi/linux/blkpg.h +++ b/include/uapi/linux/blkpg.h @@ -2,29 +2,6 @@ #ifndef _UAPI__LINUX_BLKPG_H #define _UAPI__LINUX_BLKPG_H -/* - * Partition table and disk geometry handling - * - * A single ioctl with lots of subfunctions: - * - * Device number stuff: - * get_whole_disk() (given the device number of a partition, - * find the device number of the encompassing disk) - * get_all_partitions() (given the device number of a disk, return the - * device numbers of all its known partitions) - * - * Partition stuff: - * add_partition() - * delete_partition() - * test_partition_in_use() (also for test_disk_in_use) - * - * Geometry stuff: - * get_geometry() - * set_geometry() - * get_bios_drivedata() - * - * For today, only the partition stuff - aeb, 990515 - */ #include <linux/compiler.h> #include <linux/ioctl.h> @@ -52,9 +29,8 @@ struct blkpg_partition { long long start; /* starting offset in bytes */ long long length; /* length in bytes */ int pno; /* partition number */ - char devname[BLKPG_DEVNAMELTH]; /* partition name, like sda5 or c0d1p2, - to be used in kernel messages */ - char volname[BLKPG_VOLNAMELTH]; /* volume label */ + char devname[BLKPG_DEVNAMELTH]; /* unused / ignored */ + char volname[BLKPG_VOLNAMELTH]; /* unused / ignore */ }; #endif /* _UAPI__LINUX_BLKPG_H */ diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index 79c893310492..4ba4ef0ff63a 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -3850,7 +3850,7 @@ union bpf_attr { * * long bpf_check_mtu(void *ctx, u32 ifindex, u32 *mtu_len, s32 len_diff, u64 flags) * Description - * Check ctx packet size against exceeding MTU of net device (based + * Check packet size against exceeding MTU of net device (based * on *ifindex*). This helper will likely be used in combination * with helpers that adjust/change the packet size. * @@ -3867,6 +3867,14 @@ union bpf_attr { * against the current net device. This is practical if this isn't * used prior to redirect. * + * On input *mtu_len* must be a valid pointer, else verifier will + * reject BPF program. If the value *mtu_len* is initialized to + * zero then the ctx packet size is use. When value *mtu_len* is + * provided as input this specify the L3 length that the MTU check + * is done against. Remember XDP and TC length operate at L2, but + * this value is L3 as this correlate to MTU and IP-header tot_len + * values which are L3 (similar behavior as bpf_fib_lookup). + * * The Linux kernel route table can configure MTUs on a more * specific per route level, which is not provided by this helper. * For route level MTU checks use the **bpf_fib_lookup**\ () @@ -3891,11 +3899,9 @@ union bpf_attr { * * On return *mtu_len* pointer contains the MTU value of the net * device. Remember the net device configured MTU is the L3 size, - * which is returned here and XDP and TX length operate at L2. + * which is returned here and XDP and TC length operate at L2. * Helper take this into account for you, but remember when using - * MTU value in your BPF-code. On input *mtu_len* must be a valid - * pointer and be initialized (to zero), else verifier will reject - * BPF program. + * MTU value in your BPF-code. * * Return * * 0 on success, and populate MTU value in *mtu_len* pointer. diff --git a/include/uapi/linux/fuse.h b/include/uapi/linux/fuse.h index 98ca64d1beb6..54442612c48b 100644 --- a/include/uapi/linux/fuse.h +++ b/include/uapi/linux/fuse.h @@ -903,7 +903,8 @@ struct fuse_notify_retrieve_in { }; /* Device ioctls: */ -#define FUSE_DEV_IOC_CLONE _IOR(229, 0, uint32_t) +#define FUSE_DEV_IOC_MAGIC 229 +#define FUSE_DEV_IOC_CLONE _IOR(FUSE_DEV_IOC_MAGIC, 0, uint32_t) struct fuse_lseek_in { uint64_t fh; diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h index 0e0f70c0d0dc..3fd9a7e9d90c 100644 --- a/include/uapi/linux/kvm.h +++ b/include/uapi/linux/kvm.h @@ -1078,7 +1078,10 @@ struct kvm_ppc_resize_hpt { #define KVM_CAP_DIRTY_LOG_RING 192 #define KVM_CAP_X86_BUS_LOCK_EXIT 193 #define KVM_CAP_PPC_DAWR1 194 -#define KVM_CAP_PTP_KVM 195 +#define KVM_CAP_SET_GUEST_DEBUG2 195 +#define KVM_CAP_SGX_ATTRIBUTE 196 +#define KVM_CAP_VM_COPY_ENC_CONTEXT_FROM 197 +#define KVM_CAP_PTP_KVM 198 #ifdef KVM_CAP_IRQ_ROUTING @@ -1672,6 +1675,8 @@ enum sev_cmd_id { KVM_SEV_CERT_EXPORT, /* Attestation report */ KVM_SEV_GET_ATTESTATION_REPORT, + /* Guest Migration Extension */ + KVM_SEV_SEND_CANCEL, KVM_SEV_NR_MAX, }; @@ -1730,6 +1735,45 @@ struct kvm_sev_attestation_report { __u32 len; }; +struct kvm_sev_send_start { + __u32 policy; + __u64 pdh_cert_uaddr; + __u32 pdh_cert_len; + __u64 plat_certs_uaddr; + __u32 plat_certs_len; + __u64 amd_certs_uaddr; + __u32 amd_certs_len; + __u64 session_uaddr; + __u32 session_len; +}; + +struct kvm_sev_send_update_data { + __u64 hdr_uaddr; + __u32 hdr_len; + __u64 guest_uaddr; + __u32 guest_len; + __u64 trans_uaddr; + __u32 trans_len; +}; + +struct kvm_sev_receive_start { + __u32 handle; + __u32 policy; + __u64 pdh_uaddr; + __u32 pdh_len; + __u64 session_uaddr; + __u32 session_len; +}; + +struct kvm_sev_receive_update_data { + __u64 hdr_uaddr; + __u32 hdr_len; + __u64 guest_uaddr; + __u32 guest_len; + __u64 trans_uaddr; + __u32 trans_len; +}; + #define KVM_DEV_ASSIGN_ENABLE_IOMMU (1 << 0) #define KVM_DEV_ASSIGN_PCI_2_3 (1 << 1) #define KVM_DEV_ASSIGN_MASK_INTX (1 << 2) diff --git a/include/uapi/linux/psample.h b/include/uapi/linux/psample.h index aea26ab1431c..bff5032c98df 100644 --- a/include/uapi/linux/psample.h +++ b/include/uapi/linux/psample.h @@ -3,7 +3,6 @@ #define __UAPI_PSAMPLE_H enum { - /* sampled packet metadata */ PSAMPLE_ATTR_IIFINDEX, PSAMPLE_ATTR_OIFINDEX, PSAMPLE_ATTR_ORIGSIZE, @@ -11,10 +10,8 @@ enum { PSAMPLE_ATTR_GROUP_SEQ, PSAMPLE_ATTR_SAMPLE_RATE, PSAMPLE_ATTR_DATA, - PSAMPLE_ATTR_TUNNEL, - - /* commands attributes */ PSAMPLE_ATTR_GROUP_REFCOUNT, + PSAMPLE_ATTR_TUNNEL, __PSAMPLE_ATTR_MAX }; |