diff options
Diffstat (limited to 'include/uapi/linux/gpio.h')
| -rw-r--r-- | include/uapi/linux/gpio.h | 62 |
1 files changed, 58 insertions, 4 deletions
diff --git a/include/uapi/linux/gpio.h b/include/uapi/linux/gpio.h index 4ebfe0ac6c5b..0206383c0383 100644 --- a/include/uapi/linux/gpio.h +++ b/include/uapi/linux/gpio.h @@ -18,7 +18,7 @@ * struct gpiochip_info - Information about a certain GPIO chip * @name: the Linux kernel name of this GPIO chip * @label: a functional name for this GPIO chip, such as a product - * number, may be NULL + * number, may be empty * @lines: number of GPIO lines on this chip */ struct gpiochip_info { @@ -33,6 +33,9 @@ struct gpiochip_info { #define GPIOLINE_FLAG_ACTIVE_LOW (1UL << 2) #define GPIOLINE_FLAG_OPEN_DRAIN (1UL << 3) #define GPIOLINE_FLAG_OPEN_SOURCE (1UL << 4) +#define GPIOLINE_FLAG_BIAS_PULL_UP (1UL << 5) +#define GPIOLINE_FLAG_BIAS_PULL_DOWN (1UL << 6) +#define GPIOLINE_FLAG_BIAS_DISABLE (1UL << 7) /** * struct gpioline_info - Information about a certain GPIO line @@ -41,10 +44,10 @@ struct gpiochip_info { * @flags: various flags for this line * @name: the name of this GPIO line, such as the output pin of the line on the * chip, a rail or a pin header name on a board, as specified by the gpio - * chip, may be NULL + * chip, may be empty * @consumer: a functional name for the consumer of this GPIO line as set by - * whatever is using it, will be NULL if there is no current user but may - * also be NULL if the consumer doesn't set this up + * whatever is using it, will be empty if there is no current user but may + * also be empty if the consumer doesn't set this up */ struct gpioline_info { __u32 line_offset; @@ -56,12 +59,43 @@ struct gpioline_info { /* Maximum number of requested handles */ #define GPIOHANDLES_MAX 64 +/* Possible line status change events */ +enum { + GPIOLINE_CHANGED_REQUESTED = 1, + GPIOLINE_CHANGED_RELEASED, + GPIOLINE_CHANGED_CONFIG, +}; + +/** + * struct gpioline_info_changed - Information about a change in status + * of a GPIO line + * @info: updated line information + * @timestamp: estimate of time of status change occurrence, in nanoseconds + * and GPIOLINE_CHANGED_CONFIG + * @event_type: one of GPIOLINE_CHANGED_REQUESTED, GPIOLINE_CHANGED_RELEASED + * + * Note: struct gpioline_info embedded here has 32-bit alignment on its own, + * but it works fine with 64-bit alignment too. With its 72 byte size, we can + * guarantee there are no implicit holes between it and subsequent members. + * The 20-byte padding at the end makes sure we don't add any implicit padding + * at the end of the structure on 64-bit architectures. + */ +struct gpioline_info_changed { + struct gpioline_info info; + __u64 timestamp; + __u32 event_type; + __u32 padding[5]; /* for future use */ +}; + /* Linerequest flags */ #define GPIOHANDLE_REQUEST_INPUT (1UL << 0) #define GPIOHANDLE_REQUEST_OUTPUT (1UL << 1) #define GPIOHANDLE_REQUEST_ACTIVE_LOW (1UL << 2) #define GPIOHANDLE_REQUEST_OPEN_DRAIN (1UL << 3) #define GPIOHANDLE_REQUEST_OPEN_SOURCE (1UL << 4) +#define GPIOHANDLE_REQUEST_BIAS_PULL_UP (1UL << 5) +#define GPIOHANDLE_REQUEST_BIAS_PULL_DOWN (1UL << 6) +#define GPIOHANDLE_REQUEST_BIAS_DISABLE (1UL << 7) /** * struct gpiohandle_request - Information about a GPIO handle request @@ -95,6 +129,24 @@ struct gpiohandle_request { }; /** + * struct gpiohandle_config - Configuration for a GPIO handle request + * @flags: updated flags for the requested GPIO lines, such as + * GPIOHANDLE_REQUEST_OUTPUT, GPIOHANDLE_REQUEST_ACTIVE_LOW etc, OR:ed + * together + * @default_values: if the GPIOHANDLE_REQUEST_OUTPUT is set in flags, + * this specifies the default output value, should be 0 (low) or + * 1 (high), anything else than 0 or 1 will be interpreted as 1 (high) + * @padding: reserved for future use and should be zero filled + */ +struct gpiohandle_config { + __u32 flags; + __u8 default_values[GPIOHANDLES_MAX]; + __u32 padding[4]; /* padding for future use */ +}; + +#define GPIOHANDLE_SET_CONFIG_IOCTL _IOWR(0xB4, 0x0a, struct gpiohandle_config) + +/** * struct gpiohandle_data - Information of values on a GPIO handle * @values: when getting the state of lines this contains the current * state of a line, when setting the state of lines these should contain @@ -152,6 +204,8 @@ struct gpioevent_data { #define GPIO_GET_CHIPINFO_IOCTL _IOR(0xB4, 0x01, struct gpiochip_info) #define GPIO_GET_LINEINFO_IOCTL _IOWR(0xB4, 0x02, struct gpioline_info) +#define GPIO_GET_LINEINFO_WATCH_IOCTL _IOWR(0xB4, 0x0b, struct gpioline_info) +#define GPIO_GET_LINEINFO_UNWATCH_IOCTL _IOWR(0xB4, 0x0c, __u32) #define GPIO_GET_LINEHANDLE_IOCTL _IOWR(0xB4, 0x03, struct gpiohandle_request) #define GPIO_GET_LINEEVENT_IOCTL _IOWR(0xB4, 0x04, struct gpioevent_request) |