diff options
Diffstat (limited to 'include/linux/usb')
| -rw-r--r-- | include/linux/usb/cdc_ncm.h | 2 | ||||
| -rw-r--r-- | include/linux/usb/chipidea.h | 2 | ||||
| -rw-r--r-- | include/linux/usb/composite.h | 4 | ||||
| -rw-r--r-- | include/linux/usb/functionfs.h | 30 | ||||
| -rw-r--r-- | include/linux/usb/gadget.h | 58 | ||||
| -rw-r--r-- | include/linux/usb/hcd.h | 4 | ||||
| -rw-r--r-- | include/linux/usb/msm_hsusb.h | 3 | ||||
| -rw-r--r-- | include/linux/usb/musb.h | 3 | ||||
| -rw-r--r-- | include/linux/usb/omap_control_usb.h | 83 | ||||
| -rw-r--r-- | include/linux/usb/omap_usb.h | 67 | ||||
| -rw-r--r-- | include/linux/usb/otg-fsm.h | 244 | ||||
| -rw-r--r-- | include/linux/usb/phy.h | 16 | ||||
| -rw-r--r-- | include/linux/usb/serial.h | 3 | ||||
| -rw-r--r-- | include/linux/usb/uas.h | 14 | ||||
| -rw-r--r-- | include/linux/usb/usbnet.h | 2 |
15 files changed, 336 insertions, 199 deletions
diff --git a/include/linux/usb/cdc_ncm.h b/include/linux/usb/cdc_ncm.h index c3fa80745996..44b38b92236a 100644 --- a/include/linux/usb/cdc_ncm.h +++ b/include/linux/usb/cdc_ncm.h @@ -88,11 +88,13 @@ #define cdc_ncm_data_intf_is_mbim(x) ((x)->desc.bInterfaceProtocol == USB_CDC_MBIM_PROTO_NTB) struct cdc_ncm_ctx { + struct usb_cdc_ncm_ntb_parameters ncm_parm; struct hrtimer tx_timer; struct tasklet_struct bh; const struct usb_cdc_ncm_desc *func_desc; const struct usb_cdc_mbim_desc *mbim_desc; + const struct usb_cdc_mbim_extended_desc *mbim_extended_desc; const struct usb_cdc_ether_desc *ether_desc; struct usb_interface *control; diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h index 7d399671a566..bbe779f640be 100644 --- a/include/linux/usb/chipidea.h +++ b/include/linux/usb/chipidea.h @@ -24,6 +24,8 @@ struct ci_hdrc_platform_data { * but otg is not supported (no register otgsc). */ #define CI_HDRC_DUAL_ROLE_NOT_OTG BIT(4) +#define CI_HDRC_IMX28_WRITE_FIX BIT(5) +#define CI_HDRC_FORCE_FULLSPEED BIT(6) enum usb_dr_mode dr_mode; #define CI_HDRC_CONTROLLER_RESET_EVENT 0 #define CI_HDRC_CONTROLLER_STOPPED_EVENT 1 diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h index 5e61589fc166..d3ca3b53837c 100644 --- a/include/linux/usb/composite.h +++ b/include/linux/usb/composite.h @@ -92,7 +92,7 @@ struct usb_configuration; * @suspend: Notifies functions when the host stops sending USB traffic. * @resume: Notifies functions when the host restarts USB traffic. * @get_status: Returns function status as a reply to - * GetStatus() request when the recepient is Interface. + * GetStatus() request when the recipient is Interface. * @func_suspend: callback to be called when * SetFeature(FUNCTION_SUSPEND) is reseived * @@ -468,6 +468,8 @@ struct usb_function_instance { struct config_group group; struct list_head cfs_list; struct usb_function_driver *fd; + int (*set_inst_name)(struct usb_function_instance *inst, + const char *name); void (*free_func_inst)(struct usb_function_instance *inst); }; diff --git a/include/linux/usb/functionfs.h b/include/linux/usb/functionfs.h index 65d0a88dbc67..71190663f1ee 100644 --- a/include/linux/usb/functionfs.h +++ b/include/linux/usb/functionfs.h @@ -3,34 +3,4 @@ #include <uapi/linux/usb/functionfs.h> - -struct ffs_data; -struct usb_composite_dev; -struct usb_configuration; - - -static int functionfs_init(void) __attribute__((warn_unused_result)); -static void functionfs_cleanup(void); - -static int functionfs_bind(struct ffs_data *ffs, struct usb_composite_dev *cdev) - __attribute__((warn_unused_result, nonnull)); -static void functionfs_unbind(struct ffs_data *ffs) - __attribute__((nonnull)); - -static int functionfs_bind_config(struct usb_composite_dev *cdev, - struct usb_configuration *c, - struct ffs_data *ffs) - __attribute__((warn_unused_result, nonnull)); - - -static int functionfs_ready_callback(struct ffs_data *ffs) - __attribute__((warn_unused_result, nonnull)); -static void functionfs_closed_callback(struct ffs_data *ffs) - __attribute__((nonnull)); -static void *functionfs_acquire_dev_callback(const char *dev_name) - __attribute__((warn_unused_result, nonnull)); -static void functionfs_release_dev_callback(struct ffs_data *ffs_data) - __attribute__((nonnull)); - - #endif diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index 942ef5e053bf..c3a61853cd13 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -148,6 +148,9 @@ struct usb_ep_ops { * @maxpacket:The maximum packet size used on this endpoint. The initial * value can sometimes be reduced (hardware allowing), according to * the endpoint descriptor used to configure the endpoint. + * @maxpacket_limit:The maximum packet size value which can be handled by this + * endpoint. It's set once by UDC driver when endpoint is initialized, and + * should not be changed. Should not be confused with maxpacket. * @max_streams: The maximum number of streams supported * by this EP (0 - 16, actual number is 2^n) * @mult: multiplier, 'mult' value for SS Isoc EPs @@ -171,6 +174,7 @@ struct usb_ep { const struct usb_ep_ops *ops; struct list_head ep_list; unsigned maxpacket:16; + unsigned maxpacket_limit:16; unsigned max_streams:16; unsigned mult:2; unsigned maxburst:5; @@ -182,6 +186,21 @@ struct usb_ep { /*-------------------------------------------------------------------------*/ /** + * usb_ep_set_maxpacket_limit - set maximum packet size limit for endpoint + * @ep:the endpoint being configured + * @maxpacket_limit:value of maximum packet size limit + * + * This function shoud be used only in UDC drivers to initialize endpoint + * (usually in probe function). + */ +static inline void usb_ep_set_maxpacket_limit(struct usb_ep *ep, + unsigned maxpacket_limit) +{ + ep->maxpacket_limit = maxpacket_limit; + ep->maxpacket = maxpacket_limit; +} + +/** * usb_ep_enable - configure endpoint, making it usable * @ep:the endpoint being configured. may not be the endpoint named "ep0". * drivers discover endpoints through the ep_list of a usb_gadget. @@ -485,6 +504,11 @@ struct usb_gadget_ops { * @max_speed: Maximal speed the UDC can handle. UDC must support this * and all slower speeds. * @state: the state we are now (attached, suspended, configured, etc) + * @name: Identifies the controller hardware type. Used in diagnostics + * and sometimes configuration. + * @dev: Driver model state for this abstract device. + * @out_epnum: last used out ep number + * @in_epnum: last used in ep number * @sg_supported: true if we can handle scatter-gather * @is_otg: True if the USB device port uses a Mini-AB jack, so that the * gadget driver must provide a USB OTG descriptor. @@ -497,11 +521,8 @@ struct usb_gadget_ops { * only supports HNP on a different root port. * @b_hnp_enable: OTG device feature flag, indicating that the A-Host * enabled HNP support. - * @name: Identifies the controller hardware type. Used in diagnostics - * and sometimes configuration. - * @dev: Driver model state for this abstract device. - * @out_epnum: last used out ep number - * @in_epnum: last used in ep number + * @quirk_ep_out_aligned_size: epout requires buffer size to be aligned to + * MaxPacketSize. * * Gadgets have a mostly-portable "gadget driver" implementing device * functions, handling all usb configurations and interfaces. Gadget @@ -530,16 +551,18 @@ struct usb_gadget { enum usb_device_speed speed; enum usb_device_speed max_speed; enum usb_device_state state; + const char *name; + struct device dev; + unsigned out_epnum; + unsigned in_epnum; + unsigned sg_supported:1; unsigned is_otg:1; unsigned is_a_peripheral:1; unsigned b_hnp_enable:1; unsigned a_hnp_support:1; unsigned a_alt_hnp_support:1; - const char *name; - struct device dev; - unsigned out_epnum; - unsigned in_epnum; + unsigned quirk_ep_out_aligned_size:1; }; #define work_to_gadget(w) (container_of((w), struct usb_gadget, work)) @@ -558,6 +581,23 @@ static inline struct usb_gadget *dev_to_usb_gadget(struct device *dev) /** + * usb_ep_align_maybe - returns @len aligned to ep's maxpacketsize if gadget + * requires quirk_ep_out_aligned_size, otherwise reguens len. + * @g: controller to check for quirk + * @ep: the endpoint whose maxpacketsize is used to align @len + * @len: buffer size's length to align to @ep's maxpacketsize + * + * This helper is used in case it's required for any reason to check and maybe + * align buffer's size to an ep's maxpacketsize. + */ +static inline size_t +usb_ep_align_maybe(struct usb_gadget *g, struct usb_ep *ep, size_t len) +{ + return !g->quirk_ep_out_aligned_size ? len : + round_up(len, (size_t)ep->desc->wMaxPacketSize); +} + +/** * gadget_is_dualspeed - return true iff the hardware handles high speed * @g: controller that might support both high and full speeds */ diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index b8aba196f7f1..485cd5e2100c 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -134,6 +134,7 @@ struct usb_hcd { unsigned rh_registered:1;/* is root hub registered? */ unsigned rh_pollable:1; /* may we poll the root hub? */ unsigned msix_enabled:1; /* driver has MSI-X enabled? */ + unsigned remove_phy:1; /* auto-remove USB phy */ /* The next flag is a stopgap, to be removed when all the HCDs * support the new root-hub polling mechanism. */ @@ -142,6 +143,7 @@ struct usb_hcd { unsigned authorized_default:1; unsigned has_tt:1; /* Integrated TT in root hub */ unsigned amd_resume_bug:1; /* AMD remote wakeup quirk */ + unsigned can_do_streams:1; /* HC supports streams */ unsigned int irq; /* irq allocated */ void __iomem *regs; /* device memory/io */ @@ -352,6 +354,8 @@ struct hc_driver { void (*reset_bandwidth)(struct usb_hcd *, struct usb_device *); /* Returns the hardware-chosen device address */ int (*address_device)(struct usb_hcd *, struct usb_device *udev); + /* prepares the hardware to send commands to the device */ + int (*enable_device)(struct usb_hcd *, struct usb_device *udev); /* Notifies the HCD after a hub descriptor is fetched. * Will block. */ diff --git a/include/linux/usb/msm_hsusb.h b/include/linux/usb/msm_hsusb.h index 22a396c13f3a..32754835a39b 100644 --- a/include/linux/usb/msm_hsusb.h +++ b/include/linux/usb/msm_hsusb.h @@ -20,6 +20,7 @@ #include <linux/types.h> #include <linux/usb/otg.h> +#include <linux/clk.h> /** * Supported USB modes @@ -135,6 +136,8 @@ struct msm_otg_platform_data { enum msm_usb_phy_type phy_type; void (*setup_gpio)(enum usb_otg_state state); char *pclk_src_name; + int (*link_clk_reset)(struct clk *link_clk, bool assert); + int (*phy_clk_reset)(struct clk *phy_clk); }; /** diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h index eb505250940a..a4ee1b582183 100644 --- a/include/linux/usb/musb.h +++ b/include/linux/usb/musb.h @@ -76,6 +76,9 @@ struct musb_hdrc_config { unsigned dma:1 __deprecated; /* supports DMA */ unsigned vendor_req:1 __deprecated; /* vendor registers required */ + /* need to explicitly de-assert the port reset after resume? */ + unsigned host_port_deassert_reset_at_resume:1; + u8 num_eps; /* number of endpoints _with_ ep0 */ u8 dma_channels __deprecated; /* number of dma channels */ u8 dyn_fifo_size; /* dynamic size in bytes */ diff --git a/include/linux/usb/omap_control_usb.h b/include/linux/usb/omap_control_usb.h deleted file mode 100644 index 596b01918813..000000000000 --- a/include/linux/usb/omap_control_usb.h +++ /dev/null @@ -1,83 +0,0 @@ -/* - * omap_control_usb.h - Header file for the USB part of control module. - * - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * Author: Kishon Vijay Abraham I <kishon@ti.com> - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __OMAP_CONTROL_USB_H__ -#define __OMAP_CONTROL_USB_H__ - -enum omap_control_usb_type { - OMAP_CTRL_TYPE_OTGHS = 1, /* Mailbox OTGHS_CONTROL */ - OMAP_CTRL_TYPE_USB2, /* USB2_PHY, power down in CONTROL_DEV_CONF */ - OMAP_CTRL_TYPE_PIPE3, /* PIPE3 PHY, DPLL & seperate Rx/Tx power */ - OMAP_CTRL_TYPE_DRA7USB2, /* USB2 PHY, power and power_aux e.g. DRA7 */ -}; - -struct omap_control_usb { - struct device *dev; - - u32 __iomem *otghs_control; - u32 __iomem *power; - u32 __iomem *power_aux; - - struct clk *sys_clk; - - enum omap_control_usb_type type; -}; - -enum omap_control_usb_mode { - USB_MODE_UNDEFINED = 0, - USB_MODE_HOST, - USB_MODE_DEVICE, - USB_MODE_DISCONNECT, -}; - -#define OMAP_CTRL_DEV_PHY_PD BIT(0) - -#define OMAP_CTRL_DEV_AVALID BIT(0) -#define OMAP_CTRL_DEV_BVALID BIT(1) -#define OMAP_CTRL_DEV_VBUSVALID BIT(2) -#define OMAP_CTRL_DEV_SESSEND BIT(3) -#define OMAP_CTRL_DEV_IDDIG BIT(4) - -#define OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK 0x003FC000 -#define OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT 0xE - -#define OMAP_CTRL_USB_PWRCTL_CLK_FREQ_MASK 0xFFC00000 -#define OMAP_CTRL_USB_PWRCTL_CLK_FREQ_SHIFT 0x16 - -#define OMAP_CTRL_USB3_PHY_TX_RX_POWERON 0x3 -#define OMAP_CTRL_USB3_PHY_TX_RX_POWEROFF 0x0 - -#define OMAP_CTRL_USB2_PHY_PD BIT(28) - -#if IS_ENABLED(CONFIG_OMAP_CONTROL_USB) -extern void omap_control_usb_phy_power(struct device *dev, int on); -extern void omap_control_usb_set_mode(struct device *dev, - enum omap_control_usb_mode mode); -#else - -static inline void omap_control_usb_phy_power(struct device *dev, int on) -{ -} - -static inline void omap_control_usb_set_mode(struct device *dev, - enum omap_control_usb_mode mode) -{ -} -#endif - -#endif /* __OMAP_CONTROL_USB_H__ */ diff --git a/include/linux/usb/omap_usb.h b/include/linux/usb/omap_usb.h deleted file mode 100644 index 6ae29360e1d2..000000000000 --- a/include/linux/usb/omap_usb.h +++ /dev/null @@ -1,67 +0,0 @@ -/* - * omap_usb.h -- omap usb2 phy header file - * - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * Author: Kishon Vijay Abraham I <kishon@ti.com> - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __DRIVERS_OMAP_USB2_H -#define __DRIVERS_OMAP_USB2_H - -#include <linux/io.h> -#include <linux/usb/otg.h> - -struct usb_dpll_params { - u16 m; - u8 n; - u8 freq:3; - u8 sd; - u32 mf; -}; - -struct omap_usb { - struct usb_phy phy; - struct phy_companion *comparator; - void __iomem *pll_ctrl_base; - struct device *dev; - struct device *control_dev; - struct clk *wkupclk; - struct clk *sys_clk; - struct clk *optclk; - u8 is_suspended:1; -}; - -#define phy_to_omapusb(x) container_of((x), struct omap_usb, phy) - -#if defined(CONFIG_OMAP_USB2) || defined(CONFIG_OMAP_USB2_MODULE) -extern int omap_usb2_set_comparator(struct phy_companion *comparator); -#else -static inline int omap_usb2_set_comparator(struct phy_companion *comparator) -{ - return -ENODEV; -} -#endif - -static inline u32 omap_usb_readl(void __iomem *addr, unsigned offset) -{ - return __raw_readl(addr + offset); -} - -static inline void omap_usb_writel(void __iomem *addr, unsigned offset, - u32 data) -{ - __raw_writel(data, addr + offset); -} - -#endif /* __DRIVERS_OMAP_USB_H */ diff --git a/include/linux/usb/otg-fsm.h b/include/linux/usb/otg-fsm.h new file mode 100644 index 000000000000..b6ba1bfb86f2 --- /dev/null +++ b/include/linux/usb/otg-fsm.h @@ -0,0 +1,244 @@ +/* Copyright (C) 2007,2008 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __LINUX_USB_OTG_FSM_H +#define __LINUX_USB_OTG_FSM_H + +#include <linux/mutex.h> +#include <linux/errno.h> + +#undef VERBOSE + +#ifdef VERBOSE +#define VDBG(fmt, args...) pr_debug("[%s] " fmt , \ + __func__, ## args) +#else +#define VDBG(stuff...) do {} while (0) +#endif + +#ifdef VERBOSE +#define MPC_LOC printk("Current Location [%s]:[%d]\n", __FILE__, __LINE__) +#else +#define MPC_LOC do {} while (0) +#endif + +#define PROTO_UNDEF (0) +#define PROTO_HOST (1) +#define PROTO_GADGET (2) + +enum otg_fsm_timer { + /* Standard OTG timers */ + A_WAIT_VRISE, + A_WAIT_VFALL, + A_WAIT_BCON, + A_AIDL_BDIS, + B_ASE0_BRST, + A_BIDL_ADIS, + + /* Auxiliary timers */ + B_SE0_SRP, + B_SRP_FAIL, + A_WAIT_ENUM, + + NUM_OTG_FSM_TIMERS, +}; + +/* OTG state machine according to the OTG spec */ +struct otg_fsm { + /* Input */ + int id; + int adp_change; + int power_up; + int test_device; + int a_bus_drop; + int a_bus_req; + int a_srp_det; + int a_vbus_vld; + int b_conn; + int a_bus_resume; + int a_bus_suspend; + int a_conn; + int b_bus_req; + int b_se0_srp; + int b_ssend_srp; + int b_sess_vld; + /* Auxilary inputs */ + int a_sess_vld; + int b_bus_resume; + int b_bus_suspend; + + /* Output */ + int data_pulse; + int drv_vbus; + int loc_conn; + int loc_sof; + int adp_prb; + int adp_sns; + + /* Internal variables */ + int a_set_b_hnp_en; + int b_srp_done; + int b_hnp_enable; + int a_clr_err; + + /* Informative variables */ + int a_bus_drop_inf; + int a_bus_req_inf; + int a_clr_err_inf; + int b_bus_req_inf; + /* Auxilary informative variables */ + int a_suspend_req_inf; + + /* Timeout indicator for timers */ + int a_wait_vrise_tmout; + int a_wait_vfall_tmout; + int a_wait_bcon_tmout; + int a_aidl_bdis_tmout; + int b_ase0_brst_tmout; + int a_bidl_adis_tmout; + + struct otg_fsm_ops *ops; + struct usb_otg *otg; + + /* Current usb protocol used: 0:undefine; 1:host; 2:client */ + int protocol; + struct mutex lock; +}; + +struct otg_fsm_ops { + void (*chrg_vbus)(struct otg_fsm *fsm, int on); + void (*drv_vbus)(struct otg_fsm *fsm, int on); + void (*loc_conn)(struct otg_fsm *fsm, int on); + void (*loc_sof)(struct otg_fsm *fsm, int on); + void (*start_pulse)(struct otg_fsm *fsm); + void (*start_adp_prb)(struct otg_fsm *fsm); + void (*start_adp_sns)(struct otg_fsm *fsm); + void (*add_timer)(struct otg_fsm *fsm, enum otg_fsm_timer timer); + void (*del_timer)(struct otg_fsm *fsm, enum otg_fsm_timer timer); + int (*start_host)(struct otg_fsm *fsm, int on); + int (*start_gadget)(struct otg_fsm *fsm, int on); +}; + + +static inline int otg_chrg_vbus(struct otg_fsm *fsm, int on) +{ + if (!fsm->ops->chrg_vbus) + return -EOPNOTSUPP; + fsm->ops->chrg_vbus(fsm, on); + return 0; +} + +static inline int otg_drv_vbus(struct otg_fsm *fsm, int on) +{ + if (!fsm->ops->drv_vbus) + return -EOPNOTSUPP; + if (fsm->drv_vbus != on) { + fsm->drv_vbus = on; + fsm->ops->drv_vbus(fsm, on); + } + return 0; +} + +static inline int otg_loc_conn(struct otg_fsm *fsm, int on) +{ + if (!fsm->ops->loc_conn) + return -EOPNOTSUPP; + if (fsm->loc_conn != on) { + fsm->loc_conn = on; + fsm->ops->loc_conn(fsm, on); + } + return 0; +} + +static inline int otg_loc_sof(struct otg_fsm *fsm, int on) +{ + if (!fsm->ops->loc_sof) + return -EOPNOTSUPP; + if (fsm->loc_sof != on) { + fsm->loc_sof = on; + fsm->ops->loc_sof(fsm, on); + } + return 0; +} + +static inline int otg_start_pulse(struct otg_fsm *fsm) +{ + if (!fsm->ops->start_pulse) + return -EOPNOTSUPP; + if (!fsm->data_pulse) { + fsm->data_pulse = 1; + fsm->ops->start_pulse(fsm); + } + return 0; +} + +static inline int otg_start_adp_prb(struct otg_fsm *fsm) +{ + if (!fsm->ops->start_adp_prb) + return -EOPNOTSUPP; + if (!fsm->adp_prb) { + fsm->adp_sns = 0; + fsm->adp_prb = 1; + fsm->ops->start_adp_prb(fsm); + } + return 0; +} + +static inline int otg_start_adp_sns(struct otg_fsm *fsm) +{ + if (!fsm->ops->start_adp_sns) + return -EOPNOTSUPP; + if (!fsm->adp_sns) { + fsm->adp_sns = 1; + fsm->ops->start_adp_sns(fsm); + } + return 0; +} + +static inline int otg_add_timer(struct otg_fsm *fsm, enum otg_fsm_timer timer) +{ + if (!fsm->ops->add_timer) + return -EOPNOTSUPP; + fsm->ops->add_timer(fsm, timer); + return 0; +} + +static inline int otg_del_timer(struct otg_fsm *fsm, enum otg_fsm_timer timer) +{ + if (!fsm->ops->del_timer) + return -EOPNOTSUPP; + fsm->ops->del_timer(fsm, timer); + return 0; +} + +static inline int otg_start_host(struct otg_fsm *fsm, int on) +{ + if (!fsm->ops->start_host) + return -EOPNOTSUPP; + return fsm->ops->start_host(fsm, on); +} + +static inline int otg_start_gadget(struct otg_fsm *fsm, int on) +{ + if (!fsm->ops->start_gadget) + return -EOPNOTSUPP; + return fsm->ops->start_gadget(fsm, on); +} + +int otg_statemachine(struct otg_fsm *fsm); + +#endif /* __LINUX_USB_OTG_FSM_H */ diff --git a/include/linux/usb/phy.h b/include/linux/usb/phy.h index 6c0b1c513db7..353053a33f21 100644 --- a/include/linux/usb/phy.h +++ b/include/linux/usb/phy.h @@ -111,6 +111,13 @@ struct usb_phy { int (*set_suspend)(struct usb_phy *x, int suspend); + /* + * Set wakeup enable for PHY, in that case, the PHY can be + * woken up from suspend status due to external events, + * like vbus change, dp/dm change and id. + */ + int (*set_wakeup)(struct usb_phy *x, bool enabled); + /* notify phy connect status change */ int (*notify_connect)(struct usb_phy *x, enum usb_device_speed speed); @@ -265,6 +272,15 @@ usb_phy_set_suspend(struct usb_phy *x, int suspend) } static inline int +usb_phy_set_wakeup(struct usb_phy *x, bool enabled) +{ + if (x && x->set_wakeup) + return x->set_wakeup(x, enabled); + else + return 0; +} + +static inline int usb_phy_notify_connect(struct usb_phy *x, enum usb_device_speed speed) { if (x && x->notify_connect) diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index 704a1ab8240c..9bb547c7bce7 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -190,7 +190,8 @@ static inline void usb_set_serial_data(struct usb_serial *serial, void *data) * @num_ports: the number of different ports this device will have. * @bulk_in_size: minimum number of bytes to allocate for bulk-in buffer * (0 = end-point size) - * @bulk_out_size: bytes to allocate for bulk-out buffer (0 = end-point size) + * @bulk_out_size: minimum number of bytes to allocate for bulk-out buffer + * (0 = end-point size) * @calc_num_ports: pointer to a function to determine how many ports this * device has dynamically. It will be called after the probe() * callback is called, but before attach() diff --git a/include/linux/usb/uas.h b/include/linux/usb/uas.h index 5499ab5c94bd..3fc8e8b9f043 100644 --- a/include/linux/usb/uas.h +++ b/include/linux/usb/uas.h @@ -9,7 +9,7 @@ struct iu { __u8 iu_id; __u8 rsvd1; __be16 tag; -}; +} __attribute__((__packed__)); enum { IU_ID_COMMAND = 0x01, @@ -52,7 +52,7 @@ struct command_iu { __u8 rsvd7; struct scsi_lun lun; __u8 cdb[16]; /* XXX: Overflow-checking tools may misunderstand */ -}; +} __attribute__((__packed__)); struct task_mgmt_iu { __u8 iu_id; @@ -62,7 +62,7 @@ struct task_mgmt_iu { __u8 rsvd2; __be16 task_tag; struct scsi_lun lun; -}; +} __attribute__((__packed__)); /* * Also used for the Read Ready and Write Ready IUs since they have the @@ -77,15 +77,15 @@ struct sense_iu { __u8 rsvd7[7]; __be16 len; __u8 sense[SCSI_SENSE_BUFFERSIZE]; -}; +} __attribute__((__packed__)); -struct response_ui { +struct response_iu { __u8 iu_id; __u8 rsvd1; __be16 tag; - __be16 add_response_info; + __u8 add_response_info[3]; __u8 response_code; -}; +} __attribute__((__packed__)); struct usb_pipe_usage_descriptor { __u8 bLength; diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h index e303eef94dd5..0662e98fef72 100644 --- a/include/linux/usb/usbnet.h +++ b/include/linux/usb/usbnet.h @@ -30,7 +30,7 @@ struct usbnet { struct driver_info *driver_info; const char *driver_name; void *driver_priv; - wait_queue_head_t *wait; + wait_queue_head_t wait; struct mutex phy_mutex; unsigned char suspend_count; unsigned char pkt_cnt, pkt_err; |