Merge tag 'scmi-updates-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/drivers

ARM SCMI updates/fixes for v5.4

Handful of fixes/updates including:
1. SCMI v2.0(recently released) support for:
	- Performance protocol fast channels
	- Reset Management Protocol
2. SCMI infrastructure/core support for recieve(Rx) channels,
   asynchronous commands and delayed response
3. Usage of asynchronous commands for clock rate setting and sensor
   reading based on the attributes read from the firmware
4. Miscellaneous cleanups(typos, naming alignment with specification,
   and SPDX License identifier)
5. Couple of fixes: removal of extra check for invalid length and
   additional check to ensure platform/firmware has released shared
   memory before using it in OSPM

* tag 'scmi-updates-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: (22 commits)
  reset: Add support for resets provided by SCMI
  firmware: arm_scmi: Add RESET protocol in SCMI v2.0
  dt-bindings: arm: Extend SCMI to support new reset protocol
  firmware: arm_scmi: Make use SCMI v2.0 fastchannel for performance protocol
  firmware: arm_scmi: Add discovery of SCMI v2.0 performance fastchannels
  firmware: arm_scmi: Use {get,put}_unaligned_le{32,64} accessors
  firmware: arm_scmi: Use asynchronous CLOCK_RATE_SET when possible
  firmware: arm_scmi: Drop config flag in clk_ops->rate_set
  firmware: arm_scmi: Add asynchronous sensor read if it supports
  firmware: arm_scmi: Drop async flag in sensor_ops->reading_get
  firmware: arm_scmi: Add support for asynchronous commands and delayed response
  firmware: arm_scmi: Add mechanism to unpack message headers
  firmware: arm_scmi: Separate out tx buffer handling and prepare to add rx
  firmware: arm_scmi: Add receive channel support for notifications
  firmware: arm_scmi: Segregate tx channel handling and prepare to add rx
  firmware: arm_scmi: Reorder some functions to avoid forward declarations
  firmware: arm_scmi: Check if platform has released shmem before using
  firmware: arm_scmi: Use the term 'message' instead of 'command'
  firmware: arm_scmi: Fix few trivial typos in comments
  firmware: arm_scmi: Remove extra check for invalid length message responses
  ...

Link: https://lore.kernel.org/r/20190814172454.26191-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 37 insertions, 9 deletions

diff --git a/include/linux/scmi_protocol.h b/include/linux/scmi_protocol.h
index 9ff2e9357e9a..881fea47c83d 100644
--- a/include/linux/scmi_protocol.h
+++ b/include/linux/scmi_protocol.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * SCMI Message Protocol driver header
  *
@@ -71,7 +71,7 @@ struct scmi_clk_ops {
 	int (*rate_get)(const struct scmi_handle *handle, u32 clk_id,
 			u64 *rate);
 	int (*rate_set)(const struct scmi_handle *handle, u32 clk_id,
-			u32 config, u64 rate);
+			u64 rate);
 	int (*enable)(const struct scmi_handle *handle, u32 clk_id);
 	int (*disable)(const struct scmi_handle *handle, u32 clk_id);
 };
@@ -145,6 +145,8 @@ struct scmi_sensor_info {
 	u32 id;
 	u8 type;
 	s8 scale;
+	u8 num_trip_points;
+	bool async;
 	char name[SCMI_MAX_STR_SIZE];
 };
 
@@ -167,9 +169,9 @@ enum scmi_sensor_class {
  *
  * @count_get: get the count of sensors provided by SCMI
  * @info_get: get the information of the specified sensor
- * @configuration_set: control notifications on cross-over events for
+ * @trip_point_notify: control notifications on cross-over events for
  *	the trip-points
- * @trip_point_set: selects and configures a trip-point of interest
+ * @trip_point_config: selects and configures a trip-point of interest
  * @reading_get: gets the current value of the sensor
  */
 struct scmi_sensor_ops {
@@ -177,12 +179,32 @@ struct scmi_sensor_ops {
 
 	const struct scmi_sensor_info *(*info_get)
 		(const struct scmi_handle *handle, u32 sensor_id);
-	int (*configuration_set)(const struct scmi_handle *handle,
-				 u32 sensor_id);
-	int (*trip_point_set)(const struct scmi_handle *handle, u32 sensor_id,
-			      u8 trip_id, u64 trip_value);
+	int (*trip_point_notify)(const struct scmi_handle *handle,
+				 u32 sensor_id, bool enable);
+	int (*trip_point_config)(const struct scmi_handle *handle,
+				 u32 sensor_id, u8 trip_id, u64 trip_value);
 	int (*reading_get)(const struct scmi_handle *handle, u32 sensor_id,
-			   bool async, u64 *value);
+			   u64 *value);
+};
+
+/**
+ * struct scmi_reset_ops - represents the various operations provided
+ *	by SCMI Reset Protocol
+ *
+ * @num_domains_get: get the count of reset domains provided by SCMI
+ * @name_get: gets the name of a reset domain
+ * @latency_get: gets the reset latency for the specified reset domain
+ * @reset: resets the specified reset domain
+ * @assert: explicitly assert reset signal of the specified reset domain
+ * @deassert: explicitly deassert reset signal of the specified reset domain
+ */
+struct scmi_reset_ops {
+	int (*num_domains_get)(const struct scmi_handle *handle);
+	char *(*name_get)(const struct scmi_handle *handle, u32 domain);
+	int (*latency_get)(const struct scmi_handle *handle, u32 domain);
+	int (*reset)(const struct scmi_handle *handle, u32 domain);
+	int (*assert)(const struct scmi_handle *handle, u32 domain);
+	int (*deassert)(const struct scmi_handle *handle, u32 domain);
 };
 
 /**
@@ -194,6 +216,7 @@ struct scmi_sensor_ops {
  * @perf_ops: pointer to set of performance protocol operations
  * @clk_ops: pointer to set of clock protocol operations
  * @sensor_ops: pointer to set of sensor protocol operations
+ * @reset_ops: pointer to set of reset protocol operations
  * @perf_priv: pointer to private data structure specific to performance
  *	protocol(for internal use only)
  * @clk_priv: pointer to private data structure specific to clock
@@ -202,6 +225,8 @@ struct scmi_sensor_ops {
  *	protocol(for internal use only)
  * @sensor_priv: pointer to private data structure specific to sensors
  *	protocol(for internal use only)
+ * @reset_priv: pointer to private data structure specific to reset
+ *	protocol(for internal use only)
  */
 struct scmi_handle {
 	struct device *dev;
@@ -210,11 +235,13 @@ struct scmi_handle {
 	struct scmi_clk_ops *clk_ops;
 	struct scmi_power_ops *power_ops;
 	struct scmi_sensor_ops *sensor_ops;
+	struct scmi_reset_ops *reset_ops;
 	/* for protocol internal use */
 	void *perf_priv;
 	void *clk_priv;
 	void *power_priv;
 	void *sensor_priv;
+	void *reset_priv;
 };
 
 enum scmi_std_protocol {
@@ -224,6 +251,7 @@ enum scmi_std_protocol {
 	SCMI_PROTOCOL_PERF = 0x13,
 	SCMI_PROTOCOL_CLOCK = 0x14,
 	SCMI_PROTOCOL_SENSOR = 0x15,
+	SCMI_PROTOCOL_RESET = 0x16,
 };
 
 struct scmi_device {