diff options
| author | Wei Fang <wei.fang@nxp.com> | 2026-03-05 11:12:11 +0800 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2026-03-19 16:14:53 +0100 |
| commit | aeef598416ffb4259280408f88472f811dba045c (patch) | |
| tree | 1d397aedf5746947420f16ebaf37227adffc7c76 /drivers/net | |
| parent | 4eb9a7bd9b60c570475b27e90b1c54ad6145ea4e (diff) | |
net: enetc: do not skip setting LaBCR[MDIO_PHYAD_PRTAD] for addr 0
[ Upstream commit dbe17e7783cb5d6451ff1217d0464865857e97e1 ]
Given that some platforms may use PHY address 0 (I suppose the PHY may
not treat address 0 as a broadcast address or default response address).
It is possible for some boards to connect multiple PHYs to the same
ENETC MAC, for example:
- a PHY with a non-zero address connects to ENETC MAC through SGMII
interface (selected via DTS_A)
- a PHY with address 0 connects to ENETC MAC through RGMII interface
(selected via DTS_B)
For the case where the ENETC port MDIO is used to manage the PHY, when
switching from DTS_A to DTS_B via soft reboot, LaBCR[MDIO_PHYAD_PRTAD]
must be updated to 0 because the NETCMIX block is not reset during soft
reboot. However, the current driver explicitly skips configuring address
0, causing LaBCR[MDIO_PHYAD_PRTAD] to retain its old value.
Therefore, remove the special-case skip of PHY address 0 so that valid
configurations using address 0 are properly supported.
Fixes: 6633df05f3ad ("net: enetc: set the external PHY address in IERB for port MDIO usage")
Fixes: 50bfd9c06f0f ("net: enetc: set external PHY address in IERB for i.MX94 ENETC")
Reviewed-by: Clark Wang <xiaoning.wang@nxp.com>
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260305031211.904812-3-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Diffstat (limited to 'drivers/net')
| -rw-r--r-- | drivers/net/ethernet/freescale/enetc/netc_blk_ctrl.c | 12 |
1 files changed, 0 insertions, 12 deletions
diff --git a/drivers/net/ethernet/freescale/enetc/netc_blk_ctrl.c b/drivers/net/ethernet/freescale/enetc/netc_blk_ctrl.c index f0e103615e88..92a0f824dae7 100644 --- a/drivers/net/ethernet/freescale/enetc/netc_blk_ctrl.c +++ b/drivers/net/ethernet/freescale/enetc/netc_blk_ctrl.c @@ -438,12 +438,6 @@ static int imx95_enetc_mdio_phyaddr_config(struct platform_device *pdev) return -EINVAL; } - /* The default value of LaBCR[MDIO_PHYAD_PRTAD ] is - * 0, so no need to set the register. - */ - if (!addr) - continue; - switch (bus_devfn) { case IMX95_ENETC0_BUS_DEVFN: netc_reg_write(priv->ierb, IERB_LBCR(0), @@ -590,12 +584,6 @@ static int imx94_enetc_mdio_phyaddr_config(struct netc_blk_ctrl *priv, return addr; } - /* The default value of LaBCR[MDIO_PHYAD_PRTAD] is 0, - * so no need to set the register. - */ - if (!addr) - return 0; - if (phy_mask & BIT(addr)) { dev_err(dev, "Find same PHY address in EMDIO and ENETC node\n"); |