Merge tag 'spi-nor/for-5.5' into mtd/next

SPI NOR core changes:
- introduce 'struct spi_nor_controller_ops',
- clean the Register Operations methods,
- use dev_dbg insted of dev_err for low level info,
- fix retlen handling in sst_write(),
- fix silent truncations in spi_nor_read and spi_nor_read_raw(),
- fix the clearing of QE bit on lock()/unlock(),
- rework the disabling of the block write protection,
- rework the Quad Enable methods,
- make sure nor->spimem and nor->controller_ops are mutually exclusive,
- set default Quad Enable method for ISSI flashes,
- add support for few flashes.

SPI NOR controller drivers changes:
- intel-spi:
	- support chips without software sequencer,
	- add support for Intel Cannon Lake and Intel Comet Lake-H flashes.

1 files changed, 49 insertions, 25 deletions

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index d347ddcac45b..adb66a2fae18 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1783,34 +1783,18 @@ done:
 }
 EXPORT_SYMBOL(genphy_update_link);
 
-/**
- * genphy_read_status - check the link status and update current link state
- * @phydev: target phy_device struct
- *
- * Description: Check the link, then figure out the current state
- *   by comparing what we advertise with what the link partner
- *   advertises.  Start by checking the gigabit possibilities,
- *   then move on to 10/100.
- */
-int genphy_read_status(struct phy_device *phydev)
+int genphy_read_lpa(struct phy_device *phydev)
 {
-	int lpa, lpagb, err, old_link = phydev->link;
-
-	/* Update the link, but return if there was an error */
-	err = genphy_update_link(phydev);
-	if (err)
-		return err;
-
-	/* why bother the PHY if nothing can have changed */
-	if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link)
-		return 0;
+	int lpa, lpagb;
 
-	phydev->speed = SPEED_UNKNOWN;
-	phydev->duplex = DUPLEX_UNKNOWN;
-	phydev->pause = 0;
-	phydev->asym_pause = 0;
+	if (phydev->autoneg == AUTONEG_ENABLE) {
+		if (!phydev->autoneg_complete) {
+			mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising,
+							0);
+			mii_lpa_mod_linkmode_lpa_t(phydev->lp_advertising, 0);
+			return 0;
+		}
 
-	if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) {
 		if (phydev->is_gigabit_capable) {
 			lpagb = phy_read(phydev, MII_STAT1000);
 			if (lpagb < 0)
@@ -1838,6 +1822,46 @@ int genphy_read_status(struct phy_device *phydev)
 			return lpa;
 
 		mii_lpa_mod_linkmode_lpa_t(phydev->lp_advertising, lpa);
+	} else {
+		linkmode_zero(phydev->lp_advertising);
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(genphy_read_lpa);
+
+/**
+ * genphy_read_status - check the link status and update current link state
+ * @phydev: target phy_device struct
+ *
+ * Description: Check the link, then figure out the current state
+ *   by comparing what we advertise with what the link partner
+ *   advertises.  Start by checking the gigabit possibilities,
+ *   then move on to 10/100.
+ */
+int genphy_read_status(struct phy_device *phydev)
+{
+	int err, old_link = phydev->link;
+
+	/* Update the link, but return if there was an error */
+	err = genphy_update_link(phydev);
+	if (err)
+		return err;
+
+	/* why bother the PHY if nothing can have changed */
+	if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link)
+		return 0;
+
+	phydev->speed = SPEED_UNKNOWN;
+	phydev->duplex = DUPLEX_UNKNOWN;
+	phydev->pause = 0;
+	phydev->asym_pause = 0;
+
+	err = genphy_read_lpa(phydev);
+	if (err < 0)
+		return err;
+
+	if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) {
 		phy_resolve_aneg_linkmode(phydev);
 	} else if (phydev->autoneg == AUTONEG_DISABLE) {
 		int bmcr = phy_read(phydev, MII_BMCR);