Merge tag 'input-for-v6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input fixes from Dmitry Torokhov:

 - a tweak to uinput interface to reject requests with abnormally large
   number of slots. 100 slots/contacts should be enough for real devices

 - support for FocalTech FT8201 added to the edt-ft5x06 driver

 - tweaks to i8042 to handle more devices that have issue with its
   emulation

 - Synaptics touchpad switched to native SMbus/RMI mode on HP Elitebook
   840 G2

 - other minor fixes

* tag 'input-for-v6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: himax_hx83112b - fix incorrect size when reading product ID
  Input: i8042 - use new forcenorestore quirk to replace old buggy quirk combination
  Input: i8042 - add forcenorestore quirk to leave controller untouched even on s3
  Input: i8042 - add Fujitsu Lifebook E756 to i8042 quirk table
  Input: uinput - reject requests with unreasonable number of slots
  Input: edt-ft5x06 - add support for FocalTech FT8201
  dt-bindings: input: touchscreen: edt-ft5x06: Document FT8201 support
  Input: adc-joystick - fix optional value handling
  Input: synaptics - enable SMBus for HP Elitebook 840 G2
  Input: ads7846 - ratelimit the spi_sync error message

2 files changed, 24 insertions, 15 deletions

diff --git a/drivers/input/serio/i8042-acpipnpio.h b/drivers/input/serio/i8042-acpipnpio.h
index 5b50475ec414..bad238f69a7a 100644
--- a/drivers/input/serio/i8042-acpipnpio.h
+++ b/drivers/input/serio/i8042-acpipnpio.h
@@ -83,6 +83,7 @@ static inline void i8042_write_command(int val)
 #define SERIO_QUIRK_KBDRESET		BIT(12)
 #define SERIO_QUIRK_DRITEK		BIT(13)
 #define SERIO_QUIRK_NOPNP		BIT(14)
+#define SERIO_QUIRK_FORCENORESTORE	BIT(15)
 
 /* Quirk table for different mainboards. Options similar or identical to i8042
  * module parameters.
@@ -627,6 +628,15 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
 		.driver_data = (void *)(SERIO_QUIRK_NOMUX)
 	},
 	{
+		/* Fujitsu Lifebook E756 */
+		/* https://bugzilla.suse.com/show_bug.cgi?id=1229056 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E756"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX)
+	},
+	{
 		/* Fujitsu Lifebook E5411 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU CLIENT COMPUTING LIMITED"),
@@ -1149,18 +1159,10 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
 					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
 	},
 	{
-		/*
-		 * Setting SERIO_QUIRK_NOMUX or SERIO_QUIRK_RESET_ALWAYS makes
-		 * the keyboard very laggy for ~5 seconds after boot and
-		 * sometimes also after resume.
-		 * However both are required for the keyboard to not fail
-		 * completely sometimes after boot or resume.
-		 */
 		.matches = {
 			DMI_MATCH(DMI_BOARD_NAME, "N150CU"),
 		},
-		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
-					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
 	},
 	{
 		.matches = {
@@ -1685,6 +1687,8 @@ static void __init i8042_check_quirks(void)
 	if (quirks & SERIO_QUIRK_NOPNP)
 		i8042_nopnp = true;
 #endif
+	if (quirks & SERIO_QUIRK_FORCENORESTORE)
+		i8042_forcenorestore = true;
 }
 #else
 static inline void i8042_check_quirks(void) {}
@@ -1718,7 +1722,7 @@ static int __init i8042_platform_init(void)
 
 	i8042_check_quirks();
 
-	pr_debug("Active quirks (empty means none):%s%s%s%s%s%s%s%s%s%s%s%s%s\n",
+	pr_debug("Active quirks (empty means none):%s%s%s%s%s%s%s%s%s%s%s%s%s%s\n",
 		i8042_nokbd ? " nokbd" : "",
 		i8042_noaux ? " noaux" : "",
 		i8042_nomux ? " nomux" : "",
@@ -1738,10 +1742,11 @@ static int __init i8042_platform_init(void)
 		"",
 #endif
 #ifdef CONFIG_PNP
-		i8042_nopnp ? " nopnp" : "");
+		i8042_nopnp ? " nopnp" : "",
 #else
-		"");
+		"",
 #endif
+		i8042_forcenorestore ? " forcenorestore" : "");
 
 	retval = i8042_pnp_init();
 	if (retval)
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index e0fb1db653b7..8ec4872b4471 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -115,6 +115,10 @@ module_param_named(nopnp, i8042_nopnp, bool, 0);
 MODULE_PARM_DESC(nopnp, "Do not use PNP to detect controller settings");
 #endif
 
+static bool i8042_forcenorestore;
+module_param_named(forcenorestore, i8042_forcenorestore, bool, 0);
+MODULE_PARM_DESC(forcenorestore, "Force no restore on s3 resume, copying s2idle behaviour");
+
 #define DEBUG
 #ifdef DEBUG
 static bool i8042_debug;
@@ -1232,7 +1236,7 @@ static int i8042_pm_suspend(struct device *dev)
 {
 	int i;
 
-	if (pm_suspend_via_firmware())
+	if (!i8042_forcenorestore && pm_suspend_via_firmware())
 		i8042_controller_reset(true);
 
 	/* Set up serio interrupts for system wakeup. */
@@ -1248,7 +1252,7 @@ static int i8042_pm_suspend(struct device *dev)
 
 static int i8042_pm_resume_noirq(struct device *dev)
 {
-	if (!pm_resume_via_firmware())
+	if (i8042_forcenorestore || !pm_resume_via_firmware())
 		i8042_interrupt(0, NULL);
 
 	return 0;
@@ -1271,7 +1275,7 @@ static int i8042_pm_resume(struct device *dev)
 	 * not restore the controller state to whatever it had been at boot
 	 * time, so we do not need to do anything.
 	 */
-	if (!pm_suspend_via_firmware())
+	if (i8042_forcenorestore || !pm_suspend_via_firmware())
 		return 0;
 
 	/*