Merge tag 'hwmon-for-v7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:

 - Fix initialization commands for AHT20

 - Correct a malformed email address (emc1403)

 - Check the it87_lock() return value

 - Fix inverted polarity (max6639)

 - Fix overflows, underflows, sign extension, and other problems in
   macsmc

 - Fix stack overflow in debugfs read (pmbus/q54sj108a2)

 - Drop support for SMARC-sAM67 (discontinued and never released to
   market)

* tag 'hwmon-for-v7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (pmbus/q54sj108a2) fix stack overflow in debugfs read
  hwmon: (max6639) fix inverted polarity
  dt-bindings: hwmon: sl28cpld: Drop sa67mcu compatible
  hwmon: (it87) Check the it87_lock() return value
  Revert "hwmon: add SMARC-sAM67 support"
  hwmon: (aht10) Fix initialization commands for AHT20
  hwmon: (emc1403) correct a malformed email address
  hwmon: (macsmc) Fix overflows, underflows, and sign extension
  hwmon: (macsmc) Fix regressions in Apple Silicon SMC hwmon driver

4 files changed, 1 insertions, 44 deletions

diff --git a/Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml b/Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml
index 966b221b6caa..5803a1770cad 100644
--- a/Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml
+++ b/Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml
@@ -16,7 +16,6 @@ description: |
 properties:
   compatible:
     enum:
-      - kontron,sa67mcu-hwmon
       - kontron,sl28cpld-fan
 
   reg:
diff --git a/Documentation/hwmon/emc1403.rst b/Documentation/hwmon/emc1403.rst
index 57f833b1a800..77060d515323 100644
--- a/Documentation/hwmon/emc1403.rst
+++ b/Documentation/hwmon/emc1403.rst
@@ -57,7 +57,7 @@ Supported chips:
 	- https://ww1.microchip.com/downloads/en/DeviceDoc/EMC1438%20DS%20Rev.%201.0%20(04-29-10).pdf
 
 Author:
-    Kalhan Trisal <kalhan.trisal@intel.com
+    Kalhan Trisal <kalhan.trisal@intel.com>
 
 
 Description
diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index d91dbb20c7dc..b2ca8513cfcd 100644
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -220,7 +220,6 @@ Hardware Monitoring Kernel Drivers
    q54sj108a2
    qnap-mcu-hwmon
    raspberrypi-hwmon
-   sa67
    sbrmi
    sbtsi_temp
    sch5627
diff --git a/Documentation/hwmon/sa67.rst b/Documentation/hwmon/sa67.rst
deleted file mode 100644
index 029c7c169b7f..000000000000
--- a/Documentation/hwmon/sa67.rst
+++ /dev/null
@@ -1,41 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0-only
-
-Kernel driver sa67mcu
-=====================
-
-Supported chips:
-
-   * Kontron sa67mcu
-
-     Prefix: 'sa67mcu'
-
-     Datasheet: not available
-
-Authors: Michael Walle <mwalle@kernel.org>
-
-Description
------------
-
-The sa67mcu is a board management controller which also exposes a hardware
-monitoring controller.
-
-The controller has two voltage and one temperature sensor. The values are
-hold in two 8 bit registers to form one 16 bit value. Reading the lower byte
-will also capture the high byte to make the access atomic. The unit of the
-volatge sensors are 1mV and the unit of the temperature sensor is 0.1degC.
-
-Sysfs entries
--------------
-
-The following attributes are supported.
-
-======================= ========================================================
-in0_label		"VDDIN"
-in0_input		Measured VDDIN voltage.
-
-in1_label		"VDD_RTC"
-in1_input		Measured VDD_RTC voltage.
-
-temp1_input		MCU temperature. Roughly the board temperature.
-======================= ========================================================
-