kernel/tools/testing, branch linux-6.5.y

selftests: mptcp: fix fastclose with csum failure

2023-11-28T17:15:15Z

commit 7cefbe5e1dacc7236caa77e9d072423f21422fe2 upstream. Running the mp_join selftest manually with the following command line: ./mptcp_join.sh -z -C leads to some failures: 002 fastclose server test # ... rtx [fail] got 1 MP_RST[s] TX expected 0 # ... rstrx [fail] got 1 MP_RST[s] RX expected 0 The problem is really in the wrong expectations for the RST checks implied by the csum validation. Note that the same check is repeated explicitly in the same test-case, with the correct expectation and pass successfully. Address the issue explicitly setting the correct expectation for the failing checks. Reported-by: Xiumei Mu Fixes: 6bf41020b72b ("selftests: mptcp: update and extend fastclose test-cases") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni Reviewed-by: Matthieu Baerts Signed-off-by: Matthieu Baerts Link: https://lore.kernel.org/r/20231114-upstream-net-20231113-mptcp-misc-fixes-6-7-rc2-v1-5-7b9cd6a7b7f4@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

cxl/region: Fix x1 root-decoder granularity calculations

2023-11-28T17:15:09Z

commit 98a04c7aced2b43b3ac4befe216c4eecc7257d4b upstream. Root decoder granularity must match value from CFWMS, which may not be the region's granularity for non-interleaved root decoders. So when calculating granularities for host bridge decoders, use the region's granularity instead of the root decoder's granularity to ensure the correct granularities are set for the host bridge decoders and any downstream switch decoders. Test configuration is 1 host bridge * 2 switches * 2 endpoints per switch. Region created with 2048 granularity using following command line: cxl create-region -m -d decoder0.0 -w 4 mem0 mem2 mem1 mem3 \ -g 2048 -s 2048M Use "cxl list -PDE | grep granularity" to get a view of the granularity set at each level of the topology. Before this patch: "interleave_granularity":2048, "interleave_granularity":2048, "interleave_granularity":512, "interleave_granularity":2048, "interleave_granularity":2048, "interleave_granularity":512, "interleave_granularity":256, After: "interleave_granularity":2048, "interleave_granularity":2048, "interleave_granularity":4096, "interleave_granularity":2048, "interleave_granularity":2048, "interleave_granularity":4096, "interleave_granularity":2048, Fixes: 27b3f8d13830 ("cxl/region: Program target lists") Cc: Signed-off-by: Jim Harris Link: https://lore.kernel.org/r/169824893473.1403938.16110924262989774582.stgit@bgt-140510-bm03.eng.stellus.in [djbw: fixup the prebuilt cxl_test region] Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman

selftests/clone3: Fix broken test under !CONFIG_TIME_NS

2023-11-28T17:15:07Z

commit fc7f04dc23db50206bee7891516ed4726c3f64cf upstream. When execute the following command to test clone3 under !CONFIG_TIME_NS: # make headers && cd tools/testing/selftests/clone3 && make && ./clone3 we can see the following error info: # [7538] Trying clone3() with flags 0x80 (size 0) # Invalid argument - Failed to create new process # [7538] clone3() with flags says: -22 expected 0 not ok 18 [7538] Result (-22) is different than expected (0) ... # Totals: pass:18 fail:1 xfail:0 xpass:0 skip:0 error:0 This is because if CONFIG_TIME_NS is not set, but the flag CLONE_NEWTIME (0x80) is used to clone a time namespace, it will return -EINVAL in copy_time_ns(). If kernel does not support CONFIG_TIME_NS, /proc/self/ns/time will be not exist, and then we should skip clone3() test with CLONE_NEWTIME. With this patch under !CONFIG_TIME_NS: # make headers && cd tools/testing/selftests/clone3 && make && ./clone3 ... # Time namespaces are not supported ok 18 # SKIP Skipping clone3() with CLONE_NEWTIME ... # Totals: pass:18 fail:0 xfail:0 xpass:0 skip:1 error:0 Link: https://lkml.kernel.org/r/1689066814-13295-1-git-send-email-yangtiezhu@loongson.cn Fixes: 515bddf0ec41 ("selftests/clone3: test clone3 with CLONE_NEWTIME") Signed-off-by: Tiezhu Yang Suggested-by: Thomas Gleixner Cc: Christian Brauner Cc: Shuah Khan Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman

selftests/resctrl: Reduce failures due to outliers in MBA/MBM tests

2023-11-28T17:15:07Z

commit ef43c30858754d99373a63dff33280a9969b49bc upstream. The initial value of 5% chosen for the maximum allowed percentage difference between resctrl mbm value and IMC mbm value in commit 06bd03a57f8c ("selftests/resctrl: Fix MBA/MBM results reporting format") was "randomly chosen value" (as admitted by the changelog). When running tests in our lab across a large number platforms, 5% difference upper bound for success seems a bit on the low side for the MBA and MBM tests. Some platforms produce outliers that are slightly above that, typically 6-7%, which leads MBA/MBM test frequently failing. Replace the "randomly chosen value" with a success bound that is based on those measurements across large number of platforms by relaxing the MBA/MBM success bound to 8%. The relaxed bound removes the failures due the frequent outliers. Fixed commit description style error during merge: Shuah Khan Fixes: 06bd03a57f8c ("selftests/resctrl: Fix MBA/MBM results reporting format") Signed-off-by: Ilpo Järvinen Tested-by: Shaopeng Tan Reviewed-by: Reinette Chatre Reviewed-by: Shaopeng Tan Cc: Signed-off-by: Shuah Khan Signed-off-by: Greg Kroah-Hartman

selftests/resctrl: Move _GNU_SOURCE define into Makefile

2023-11-28T17:15:07Z

commit 3a1e4a91aa454a1c589a9824d54179fdbfccde45 upstream. _GNU_SOURCE is defined in resctrl.h. Defining _GNU_SOURCE has a large impact on what gets defined when including headers either before or after it. This can result in compile failures if .c file decides to include a standard header file before resctrl.h. It is safer to define _GNU_SOURCE in Makefile so it is always defined regardless of in which order includes are done. Signed-off-by: Ilpo Järvinen Tested-by: Shaopeng Tan Reviewed-by: Reinette Chatre Reviewed-by: Shaopeng Tan Cc: Signed-off-by: Shuah Khan Signed-off-by: Greg Kroah-Hartman

selftests/resctrl: Remove duplicate feature check from CMT test

2023-11-28T17:15:07Z

commit 030b48fb2cf045dead8ee2c5ead560930044c029 upstream. The test runner run_cmt_test() in resctrl_tests.c checks for CMT feature and does not run cmt_resctrl_val() if CMT is not supported. Then cmt_resctrl_val() also check is CMT is supported. Remove the duplicated feature check for CMT from cmt_resctrl_val(). Signed-off-by: Ilpo Järvinen Tested-by: Shaopeng Tan Reviewed-by: Reinette Chatre Reviewed-by: Shaopeng Tan Cc: Signed-off-by: Shuah Khan Signed-off-by: Greg Kroah-Hartman

selftests/resctrl: Fix uninitialized .sa_flags

2023-11-28T17:15:07Z

commit beb7f471847663559bd0fe60af1d70e05a1d7c6c upstream. signal_handler_unregister() calls sigaction() with uninitializing sa_flags in the struct sigaction. Make sure sa_flags is always initialized in signal_handler_unregister() by initializing the struct sigaction when declaring it. Also add the initialization to signal_handler_register() even if there are no know bugs in there because correctness is then obvious from the code itself. Fixes: 73c55fa5ab55 ("selftests/resctrl: Commonize the signal handler register/unregister for all tests") Suggested-by: Reinette Chatre Signed-off-by: Ilpo Järvinen Cc: Reviewed-by: Reinette Chatre Signed-off-by: Shuah Khan Signed-off-by: Greg Kroah-Hartman

bpf: handle ldimm64 properly in check_cfg()

2023-11-28T17:14:54Z

[ Upstream commit 3feb263bb516ee7e1da0acd22b15afbb9a7daa19 ] ldimm64 instructions are 16-byte long, and so have to be handled appropriately in check_cfg(), just like the rest of BPF verifier does. This has implications in three places: - when determining next instruction for non-jump instructions; - when determining next instruction for callback address ldimm64 instructions (in visit_func_call_insn()); - when checking for unreachable instructions, where second half of ldimm64 is expected to be unreachable; We take this also as an opportunity to report jump into the middle of ldimm64. And adjust few test_verifier tests accordingly. Acked-by: Eduard Zingerman Reported-by: Hao Sun Fixes: 475fb78fbf48 ("bpf: verifier (add branch/goto checks)") Signed-off-by: Andrii Nakryiko Link: https://lore.kernel.org/r/20231110002638.4168352-2-andrii@kernel.org Signed-off-by: Alexei Starovoitov Signed-off-by: Sasha Levin

selftests/efivarfs: create-read: fix a resource leak

2023-11-28T17:14:46Z

[ Upstream commit 3f6f8a8c5e11a9b384a36df4f40f0c9a653b6975 ] The opened file should be closed in main(), otherwise resource leak will occur that this problem was discovered by code reading Signed-off-by: zhujun2 Signed-off-by: Shuah Khan Signed-off-by: Sasha Levin

selftests/lkdtm: Disable CONFIG_UBSAN_TRAP in test config

2023-11-28T17:14:40Z

[ Upstream commit cf77bf698887c3b9ebed76dea492b07a3c2c7632 ] The lkdtm selftest config fragment enables CONFIG_UBSAN_TRAP to make the ARRAY_BOUNDS test kill the calling process when an out-of-bound access is detected by UBSAN. However, after this [1] commit, UBSAN is triggered under many new scenarios that weren't detected before, such as in struct definitions with fixed-size trailing arrays used as flexible arrays. As a result, CONFIG_UBSAN_TRAP=y has become a very aggressive option to enable except for specific situations. `make kselftest-merge` applies CONFIG_UBSAN_TRAP=y to the kernel config for all selftests, which makes many of them fail because of system hangs during boot. This change removes the config option from the lkdtm kselftest and configures the ARRAY_BOUNDS test to look for UBSAN reports rather than relying on the calling process being killed. [1] commit 2d47c6956ab3 ("ubsan: Tighten UBSAN_BOUNDS on GCC")' Signed-off-by: Ricardo Cañuelo Reviewed-by: Kees Cook Link: https://lore.kernel.org/r/20230802063252.1917997-1-ricardo.canuelo@collabora.com Signed-off-by: Kees Cook Signed-off-by: Sasha Levin