kernel/tools/testing/selftests/vm/run_vmtests, branch linux-5.2.y

selftests/vm: add script helper for CONFIG_TEST_VMALLOC_MODULE

2019-03-06T05:07:15Z

Add the test script for the kernel test driver to analyse vmalloc allocator for benchmarking and stressing purposes. It is just a kernel module loader. You can specify and pass different parameters in order to investigate allocations behaviour. See "usage" output for more details. Also add basic vmalloc smoke test to the "run_vmtests" suite. Link: http://lkml.kernel.org/r/20190103142108.20744-4-urezki@gmail.com Signed-off-by: Uladzislau Rezki (Sony) Reviewed-by: Shuah Khan Cc: Kees Cook Cc: Matthew Wilcox Cc: Michal Hocko Cc: Oleksiy Avramchenko Cc: Thomas Gleixner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

tools/testing/selftests/vm/: add MAP_POPULATE test

2018-08-22T17:52:45Z

As with many other projects, we use some shmalloc allocator. At some point we need to make a part of allocated pages back private to process. And it should be populated straight away. Check that (MAP_PRIVATE | MAP_POPULATE) actually copies the private page. [akpm@linux-foundation.org: change message, per review discussion] Link: http://lkml.kernel.org/r/20180801233636.29354-1-dima@arista.com Signed-off-by: Dmitry Safonov Reviewed-by: Andrew Morton Cc: Dmitry Safonov <0x7f454c46@gmail.com> Cc: Hua Zhong Cc: Shuah Khan Cc: Stuart Ritchie Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

selftests: vm: return Kselftest Skip code for skipped tests

2018-06-18T15:11:10Z

When vm test is skipped because of unmet dependencies and/or unsupported configuration, it exits with error which is treated as a fail by the Kselftest framework. This leads to false negative result even when the test could not be run. Change it to return kselftest skip code when a test gets skipped to clearly report that the test could not be run. Kselftest framework SKIP code is 4 and the framework prints appropriate messages to indicate that the test is skipped. Signed-off-by: Shuah Khan (Samsung OSG) Acked-by: Mike Rapoport Signed-off-by: Shuah Khan (Samsung OSG)

selftests/vm/run_vmtests: adjust hugetlb size according to nr_cpus

2018-03-10T00:40:01Z

Fix userfaultfd_hugetlb on hosts which have more than 64 cpus. --------------------------- running userfaultfd_hugetlb --------------------------- invalid MiB Usage: [FAIL] Via userfaultfd.c we can know, hugetlb_size needs to meet hugetlb_size >= nr_cpus * hugepage_size. hugepage_size is often 2M, so when host cpus > 64, it requires more than 128M. [zhijianx.li@intel.com: update changelog/comments and variable name] Link: http://lkml.kernel.org/r/20180302024356.83359-1-zhijianx.li@intel.com Link: http://lkml.kernel.org/r/20180303125027.81638-1-zhijianx.li@intel.com Link: http://lkml.kernel.org/r/20180302024356.83359-1-zhijianx.li@intel.com Signed-off-by: Li Zhijian Cc: Shuah Khan Cc: SeongJae Park Cc: Philippe Ombredanne Cc: Aneesh Kumar K.V Cc: Mike Kravetz Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

selftests/vm: move 128TB mmap boundary test to generic directory

2018-02-01T01:18:37Z

Architectures like PPC64 support mmap hint address based large address space selection. This test can be run on those architectures too. Move the test from the x86 selftests to selftest/vm so that other architectures can use it too. We also add a few new test scenarios in this patch. We do test a few boundary conditions before we do a high address mmap. PPC64 uses the address limit to validate the address in the fault path. We had bugs in this area w.r.t SLB fault handling before we updated the addess limit. We also touch the allocated space to make sure we don't have any bugs in the fault handling path. [akpm@linux-foundation.org: restore tools/testing/selftests/vm/Makefile alpha ordering] Link: http://lkml.kernel.org/r/20171123165226.32582-1-aneesh.kumar@linux.vnet.ibm.com Signed-off-by: Aneesh Kumar K.V Cc: "Kirill A . Shutemov" Cc: Ingo Molnar Cc: Thomas Gleixner Cc: "H. Peter Anvin" Cc: Shuah Khan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

Merge tag 'linux-kselftest-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

2017-05-09T03:43:30Z

Pull kselftest updates from Shuah Khan: "This update consists of: - important fixes for build failures and clean target related warnings to address regressions introduced in commit 88baa78d1f31 ("selftests: remove duplicated all and clean target") - several minor spelling fixes in and log messages and comment blocks. - Enabling configs for better test coverage in ftrace, vm, and cpufreq tests. - .gitignore changes" * tag 'linux-kselftest-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (26 commits) selftests: x86: add missing executables to .gitignore selftests: watchdog: accept multiple params on command line selftests: create cpufreq kconfig fragments selftests: x86: override clean in lib.mk to fix warnings selftests: sync: override clean in lib.mk to fix warnings selftests: splice: override clean in lib.mk to fix warnings selftests: gpio: fix clean target to remove all generated files and dirs selftests: add gpio generated files to .gitignore selftests: powerpc: override clean in lib.mk to fix warnings selftests: gpio: override clean in lib.mk to fix warnings selftests: futex: override clean in lib.mk to fix warnings selftests: lib.mk: define CLEAN macro to allow Makefiles to override clean selftests: splice: fix clean target to not remove default_file_splice_read.sh selftests: gpio: add config fragment for gpio-mockup selftests: breakpoints: allow to cross-compile for aarch64/arm64 selftests/Makefile: Add missed PHONY targets selftests/vm/run_vmtests: Fix wrong comment selftests/Makefile: Add missed closing `"` in comment selftests/vm/run_vmtests: Polish output text selftests/timers: fix spelling mistake: "Asynchronous" ...

selftests/vm: add a test for virtual address range mapping

2017-05-09T00:15:16Z

This verifies virtual address mapping below and above the 128TB range and makes sure that address returned are within the expected range depending upon the hint passed from the user space. Link: http://lkml.kernel.org/r/20170418095252.20533-1-khandual@linux.vnet.ibm.com Signed-off-by: Anshuman Khandual Cc: Michal Suchanek Cc: Aneesh Kumar K.V Cc: Shuah Khan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

userfaultfd: selftest: combine all cases into a single executable

2017-05-03T22:52:10Z

Currently, selftest for userfaultfd is compiled three times: for anonymous, shared and hugetlb memory. Let's combine all the cases into a single executable which will have a command line option for selection of the test type. Link: http://lkml.kernel.org/r/1490869741-5913-1-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport Reviewed-by: Mike Kravetz Cc: Andrea Arcangeli Cc: Shuah Khan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

selftests/vm/run_vmtests: Fix wrong comment

2017-04-21T17:22:32Z

A comment in `run_vmtests` is wrong because it is saying `128MB + 128MB == 258MB`. This commit fixes the comment. Signed-off-by: SeongJae Park Signed-off-by: Shuah Khan