kernel/tools/testing/selftests/powerpc/signal, branch linux-6.2.y

selftests/powerpc: Add a test of sigreturning to an unaligned address

2021-12-24T23:56:05Z

Add a test of sigreturning to an unaligned address (low two bits set). This should have no effect because the hardware will mask those bits. However it previously falsely triggered a warning when CONFIG_PPC_RFI_SRR_DEBUG=y. Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20211221135101.2085547-3-mpe@ellerman.id.au

selftests/powerpc: Add a test of sigreturning to the kernel

2021-12-21T09:17:59Z

We have a general signal fuzzer, sigfuz, which can modify the MSR & NIP before sigreturn. But the chance of it hitting a kernel address and also clearing MSR_PR is fairly slim. So add a specific test of sigreturn to a kernel address, both with and without attempting to clear MSR_PR (which the kernel must block). Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20211209115944.4062384-1-mpe@ellerman.id.au

selftests: Skip TM tests on synthetic TM implementations

2021-08-26T11:21:06Z

Transactional Memory was removed from the architecture in ISA v3.1. For threads running in P8/P9 compatibility mode on P10 a synthetic TM implementation is provided. In this implementation, tbegin. always sets cr0 eq meaning the abort handler is always called. This is not an issue as users of TM are expected to have a fallback non transactional way to make forward progress in the abort handler. The TEXASR indicates if a transaction failure is due to a synthetic implementation. Some of the TM self tests need a non-degenerate TM implementation for their testing to be meaningful so check for a synthetic implementation and skip the test if so. Signed-off-by: Jordan Niethe Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20210729041317.366612-2-jniethe5@gmail.com

selftests/powerpc: update .gitignore

2020-12-03T14:01:21Z

I did an in-place build of the self-tests and found that it left the tree dirty. Add missed test binaries to .gitignore Signed-off-by: Daniel Axtens Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20201201144427.1228745-1-dja@axtens.net

powerpc: Use trap metadata to prevent double restart rather than zeroing trap

2020-05-15T01:58:54Z

It's not very nice to zero trap for this, because then system calls no longer have trap_is_syscall(regs) invariant, and we can't distinguish between sc and scv system calls (in a later patch). Take one last unused bit from the low bits of the pt_regs.trap word for this instead. There is not a really good reason why it should be in trap as opposed to another field, but trap has some concept of flags and it exists. Ideally I think we would move trap to 2-byte field and have 2 more bytes available independently. Add a selftests case for this, which can be seen to fail if trap_norestart() is changed to return false. Signed-off-by: Nicholas Piggin [mpe: Make them static inlines] Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20200507121332.2233629-4-mpe@ellerman.id.au

Merge tag 'powerpc-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2020-04-05T18:12:59Z

Pull powerpc updates from Michael Ellerman: "Slightly late as I had to rebase mid-week to insert a bug fix: - A large series from Nick for 64-bit to further rework our exception vectors, and rewrite portions of the syscall entry/exit and interrupt return in C. The result is much easier to follow code that is also faster in general. - Cleanup of our ptrace code to split various parts out that had become badly intertwined with #ifdefs over the years. - Changes to our NUMA setup under the PowerVM hypervisor which should hopefully avoid non-sensical topologies which can lead to warnings from the workqueue code and other problems. - MAINTAINERS updates to remove some of our old orphan entries and update the status of others. - Quite a few other small changes and fixes all over the map. Thanks to: Abdul Haleem, afzal mohammed, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Balamuruhan S, Cédric Le Goater, Chen Zhou, Christophe JAILLET, Christophe Leroy, Christoph Hellwig, Clement Courbet, Daniel Axtens, David Gibson, Douglas Miller, Fabiano Rosas, Fangrui Song, Ganesh Goudar, Gautham R. Shenoy, Greg Kroah-Hartman, Greg Kurz, Gustavo Luiz Duarte, Hari Bathini, Ilie Halip, Jan Kara, Joe Lawrence, Joe Perches, Kajol Jain, Larry Finger, Laurentiu Tudor, Leonardo Bras, Libor Pechacek, Madhavan Srinivasan, Mahesh Salgaonkar, Masahiro Yamada, Masami Hiramatsu, Mauricio Faria de Oliveira, Michael Neuling, Michal Suchanek, Mike Rapoport, Nageswara R Sastry, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers, Oliver O'Halloran, Po-Hsu Lin, Pratik Rajesh Sampat, Rasmus Villemoes, Ravi Bangoria, Roman Bolshakov, Sam Bobroff, Sandipan Das, Santosh S, Sedat Dilek, Segher Boessenkool, Shilpasri G Bhat, Sourabh Jain, Srikar Dronamraju, Stephen Rothwell, Tyrel Datwyler, Vaibhav Jain, YueHaibing" * tag 'powerpc-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (158 commits) powerpc: Make setjmp/longjmp signature standard powerpc/cputable: Remove unnecessary copy of cpu_spec->oprofile_type powerpc: Suppress .eh_frame generation powerpc: Drop -fno-dwarf2-cfi-asm powerpc/32: drop unused ISA_DMA_THRESHOLD powerpc/powernv: Add documentation for the opal sensor_groups sysfs interfaces selftests/powerpc: Fix try-run when source tree is not writable powerpc/vmlinux.lds: Explicitly retain .gnu.hash powerpc/ptrace: move ptrace_triggered() into hw_breakpoint.c powerpc/ptrace: create ppc_gethwdinfo() powerpc/ptrace: create ptrace_get_debugreg() powerpc/ptrace: split out ADV_DEBUG_REGS related functions. powerpc/ptrace: move register viewing functions out of ptrace.c powerpc/ptrace: split out TRANSACTIONAL_MEM related functions. powerpc/ptrace: split out SPE related functions. powerpc/ptrace: split out ALTIVEC related functions. powerpc/ptrace: split out VSX related functions. powerpc/ptrace: drop PARAMETER_SAVE_AREA_OFFSET powerpc/ptrace: drop unnecessary #ifdefs CONFIG_PPC64 powerpc/ptrace: remove unused header includes ...

.gitignore: add SPDX License Identifier

2020-03-25T10:50:48Z

Add SPDX License Identifier to all .gitignore files. Signed-off-by: Masahiro Yamada Signed-off-by: Greg Kroah-Hartman

selftests/powerpc: Turn off timeout setting for benchmarks, dscr, signal, tm

2020-03-25T01:09:30Z

Some specific tests in powerpc can take longer than the default 45 seconds that added in commit 852c8cbf34d3 ("selftests/kselftest/runner.sh: Add 45 second timeout per test") to run, the following test result was collected across 2 Power8 nodes and 1 Power9 node in our pool: powerpc/benchmarks/futex_bench - 52s powerpc/dscr/dscr_sysfs_test - 116s powerpc/signal/signal_fuzzer - 88s powerpc/tm/tm_unavailable_test - 168s powerpc/tm/tm-poison - 240s Thus they will fail with TIMEOUT error. Disable the timeout setting for these sub-tests to allow them finish properly. https://bugs.launchpad.net/bugs/1864642 Fixes: 852c8cbf34d3 ("selftests/kselftest/runner.sh: Add 45 second timeout per test") Signed-off-by: Po-Hsu Lin Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20200318060004.10685-1-po-hsu.lin@canonical.com

selftests/powerpc: Add a test of sigreturn vs VDSO

2020-03-20T02:10:21Z

There's two different paths through the sigreturn code, depending on whether the VDSO is mapped or not. We recently discovered a bug in the unmapped case, because it's not commonly used these days. So add a test that sends itself a signal, then moves the VDSO, takes another signal and finally unmaps the VDSO before sending itself another signal. That tests the standard signal path, the code that handles the VDSO being moved, and also the signal path in the case where the VDSO is unmapped. Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20200304110402.6038-1-mpe@ellerman.id.au

selftests/powerpc: Reduce sigfuz runtime to ~60s

2019-10-24T05:57:37Z

The defaults for the sigfuz test is to run for 4000 iterations, but that can take quite a while and the test harness may kill the test. Reduce the number of iterations to 600, which gives a runtime of roughly 1 minute on a Power8 system. Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20191013234643.3430-1-mpe@ellerman.id.au