kernel/tools/testing/selftests/powerpc/Makefile, branch linux-4.1.y

Merge tag 'powerpc-4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux

2015-04-16T18:53:32Z

Pull powerpc updates from Michael Ellerman: - Numerous minor fixes, cleanups etc. - More EEH work from Gavin to remove its dependency on device_nodes. - Memory hotplug implemented entirely in the kernel from Nathan Fontenot. - Removal of redundant CONFIG_PPC_OF by Kevin Hao. - Rewrite of VPHN parsing logic & tests from Greg Kurz. - A fix from Nish Aravamudan to reduce memory usage by clamping nodes_possible_map. - Support for pstore on powernv from Hari Bathini. - Removal of old powerpc specific byte swap routines by David Gibson. - Fix from Vasant Hegde to prevent the flash driver telling you it was flashing your firmware when it wasn't. - Patch from Ben Herrenschmidt to add an OPAL heartbeat driver. - Fix for an oops causing get/put_cpu_var() imbalance in perf by Jan Stancek. - Some fixes for migration from Tyrel Datwyler. - A new syscall to switch the cpu endian by Michael Ellerman. - Large series from Wei Yang to implement SRIOV, reviewed and acked by Bjorn. - A fix for the OPAL sensor driver from Cédric Le Goater. - Fixes to get STRICT_MM_TYPECHECKS building again by Michael Ellerman. - Large series from Daniel Axtens to make our PCI hooks per PHB rather than per machine. - Small patch from Sam Bobroff to explicitly abort non-suspended transactions on syscalls, plus a test to exercise it. - Numerous reworks and fixes for the 24x7 PMU from Sukadev Bhattiprolu. - Small patch to enable the hard lockup detector from Anton Blanchard. - Fix from Dave Olson for missing L2 cache information on some CPUs. - Some fixes from Michael Ellerman to get Cell machines booting again. - Freescale updates from Scott: Highlights include BMan device tree nodes, an MSI erratum workaround, a couple minor performance improvements, config updates, and misc fixes/cleanup. * tag 'powerpc-4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (196 commits) powerpc/powermac: Fix build error seen with powermac smp builds powerpc/pseries: Fix compile of memory hotplug without CONFIG_MEMORY_HOTREMOVE powerpc: Remove PPC32 code from pseries specific find_and_init_phbs() powerpc/cell: Fix iommu breakage caused by controller_ops change powerpc/eeh: Fix crash in eeh_add_device_early() on Cell powerpc/perf: Cap 64bit userspace backtraces to PERF_MAX_STACK_DEPTH powerpc/perf/hv-24x7: Fail 24x7 initcall if create_events_from_catalog() fails powerpc/pseries: Correct memory hotplug locking powerpc: Fix missing L2 cache size in /sys/devices/system/cpu powerpc: Add ppc64 hard lockup detector support oprofile: Disable oprofile NMI timer on ppc64 powerpc/perf/hv-24x7: Add missing put_cpu_var() powerpc/perf/hv-24x7: Break up single_24x7_request powerpc/perf/hv-24x7: Define update_event_count() powerpc/perf/hv-24x7: Whitespace cleanup powerpc/perf/hv-24x7: Define add_event_to_24x7_request() powerpc/perf/hv-24x7: Rename hv_24x7_event_update powerpc/perf/hv-24x7: Move debug prints to separate function powerpc/perf/hv-24x7: Drop event_24x7_request() powerpc/perf/hv-24x7: Use pr_devel() to log message ... Conflicts: tools/testing/selftests/powerpc/Makefile tools/testing/selftests/powerpc/tm/Makefile

selftests/powerpc: Add a test of the switch_endian() syscall

2015-03-28T11:08:47Z

This adds a test of the switch_endian() syscall we added in the previous commit. We test it by calling the endian switch syscall, and then executing some code in the other endian to check everything went as expected. That code checks registers we expect to be maintained are. If the endian switch failed to happen that code sequence will be illegal and cause the test to abort. We then switch back to the original endian, do the same checks and finally write a success message and exit(0). Signed-off-by: Michael Ellerman

selftests: Set CC using CROSS_COMPILE once in lib.mk

2015-03-19T21:16:51Z

This avoids repeating the logic in every Makefile. We mimic the top-level Makefile and use $(CROSS_COMPILE)gcc. Signed-off-by: Michael Ellerman Signed-off-by: Shuah Khan

selftests: Add install support for the powerpc tests

2015-03-19T18:38:51Z

The bulk of the selftests are actually below the powerpc sub directory. This adds support for installing them, when on a powerpc machine, or if ARCH and CROSS_COMPILE are set appropriately. This is a little more complicated because of the sub directory structure under powerpc, but much of the common logic in lib.mk is still used. The net effect of the patch is still a reduction in code. Signed-off-by: Michael Ellerman Signed-off-by: Shuah Khan

selftests/powerpc: Rename TARGETS in powerpc selftests makefile

2015-03-18T01:02:41Z

This patch changes the name of the make variable TARGETS, to prevent it from colliding with a value set by the user on the command line (as they are recommended to do by tools/testing/selftests/README.txt). Without this patch, "make -C tools/testing/selftests TARGETS=powerpc" will fail. Signed-off-by: Sam Bobroff Signed-off-by: Michael Ellerman

selftests/powerpc: Add test for VPHN

2015-03-17T23:49:00Z

The goal is to verify vphn_unpack_associativity() parses VPHN numbers correctly. We feed it with a variety of input values and compare with expected results. PAPR+ does not say much about VPHN parsing: I came up with a list of tests that check many simple cases and some corner ones. I wouldn't dare to say the list is exhaustive though. Signed-off-by: Greg Kurz [mpe: Rework harness logic, rename to test-vphn, add -m64] Signed-off-by: Michael Ellerman Reviewed-by: Greg Kurz

selftests/powerpc: Add memcmp testcase

2015-01-23T05:44:23Z

Add a testcase for the new ppc64 memcmp. Signed-off-by: Anton Blanchard Signed-off-by: Michael Ellerman

selftests/powerpc: Add test of load_unaligned_zero_pad()

2014-09-30T04:59:12Z

It is a rarely exercised case, so we want to have a test to ensure it works as required. Signed-off-by: Anton Blanchard Signed-off-by: Michael Ellerman

selftests/powerpc: Don't ignore errors from sub Makefiles

2014-07-28T04:11:28Z

Currently we ignore errors from our sub Makefiles. We inherited that from the top-level selftests Makefile which aims to build and run as many tests as possible and damn the torpedoes. For the powerpc tests we'd instead like any errors to fail the build, so we can automatically catch build failures. We can achieve the best of both worlds by using -k, which tells make to keep building when it hits an error, but still reports the error. Signed-off-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt

powerpc: Correct DSCR during TM context switch

2014-06-11T07:02:56Z

Correct the DSCR SPR becoming temporarily corrupted if a task is context switched during a transaction. The problem occurs while suspending the task and is caused by saving the DSCR to thread.dscr after it has already been set to the CPU's default value: __switch_to() calls __switch_to_tm() which calls tm_reclaim_task() which calls tm_reclaim_thread() which calls tm_reclaim() where the DSCR is set to the CPU's default __switch_to() calls _switch() where thread.dscr is set to the DSCR When the task is resumed, it's transaction will be doomed (as usual) and the DSCR SPR will be corrupted, although the checkpointed value will be correct. Therefore the DSCR will be immediately corrected by the transaction aborting, unless it has been suspended. In that case the incorrect value can be seen by the task until it resumes the transaction. The fix is to treat the DSCR similarly to the TAR and save it early in __switch_to(). A program exposing the problem is added to the kernel self tests as: tools/testing/selftests/powerpc/tm/tm-resched-dscr. Signed-off-by: Sam Bobroff CC: [v3.10+] Signed-off-by: Benjamin Herrenschmidt