kernel/tools/testing/selftests/net/udpgso_bench.sh, branch linux-6.2.y

selftests: net: udpgso_bench: Fix racing bug between the rx/tx programs

2023-02-02T12:29:51Z

"udpgro_bench.sh" invokes udpgso_bench_rx/udpgso_bench_tx programs subsequently and while doing so, there is a chance that the rx one is not ready to accept socket connections. This racing bug could fail the test with at least one of the following: ./udpgso_bench_tx: connect: Connection refused ./udpgso_bench_tx: sendmsg: Connection refused ./udpgso_bench_tx: write: Connection refused This change addresses this by making udpgro_bench.sh wait for the rx program to be ready before firing off the tx one - up to a 10s timeout. Fixes: 3a687bef148d ("selftests: udp gso benchmark") Signed-off-by: Andrei Gherzan Cc: Paolo Abeni Cc: Willem de Bruijn Reviewed-by: Willem de Bruijn Link: https://lore.kernel.org/r/20230201001612.515730-3-andrei.gherzan@canonical.com Signed-off-by: Paolo Abeni

selftests/net: pass ipv6_args to udpgso_bench's IPv6 TCP test

2022-06-24T04:19:03Z

udpgso_bench.sh has been running its IPv6 TCP test with IPv4 arguments since its initial conmit. Looks like a typo. Fixes: 3a687bef148d ("selftests: udp gso benchmark") Cc: willemb@google.com Signed-off-by: Dimitris Michailidis Acked-by: Willem de Bruijn Link: https://lore.kernel.org/r/20220623000234.61774-1-dmichail@fungible.com Signed-off-by: Jakub Kicinski

selftests/net: make udpgso_bench skip unsupported testcases

2019-06-19T21:33:47Z

Kselftest can be run against older kernels. Instead of failing hard when a feature is unsupported, return the KSFT_SKIP exit code. Specifically, do not fail hard on missing udp zerocopy. The udp gso bench test runs multiple test cases from a single script. Fail if any case fails, else return skip if any test is skipped. Link: https://lore.kernel.org/lkml/20190618171516.GA17547@kroah.com/ Signed-off-by: Willem de Bruijn Signed-off-by: David S. Miller

net/udpgso_bench.sh test fails on error

2019-06-17T23:30:37Z

Ensure that failure on any individual test results in an overall failure of the test script. Signed-off-by: Fred Klassen Signed-off-by: David S. Miller

net/udpgso_bench.sh add UDP GSO audit tests

2019-06-17T23:30:37Z

Audit tests count the total number of messages sent and compares with total number of CMSG received on error queue. Example: udp gso zerocopy timestamp audit udp rx: 1599 MB/s 1166414 calls/s udp tx: 1615 MB/s 27395 calls/s 27395 msg/s udp rx: 1634 MB/s 1192261 calls/s udp tx: 1633 MB/s 27699 calls/s 27699 msg/s udp rx: 1633 MB/s 1191358 calls/s udp tx: 1631 MB/s 27678 calls/s 27678 msg/s Summary over 4.000 seconds... sum udp tx: 1665 MB/s 82772 calls (27590/s) 82772 msgs (27590/s) Tx Timestamps: 82772 received 0 errors Zerocopy acks: 82772 received Errors are thrown if CMSG count does not equal send count, example: Summary over 4.000 seconds... sum tcp tx: 7451 MB/s 493706 calls (123426/s) 493706 msgs (123426/s) ./udpgso_bench_tx: Unexpected number of Zerocopy completions: 493706 expected 493704 received Also reduce individual test time from 4 to 3 seconds so that overall test time does not increase significantly. v3: Enhancements as per Willem de Bruijn - document -P option for TCP audit Signed-off-by: Fred Klassen Signed-off-by: David S. Miller

selftests: extend zerocopy tests to udp

2018-12-03T23:58:32Z

Both msg_zerocopy and udpgso_bench have udp zerocopy variants. Exercise these as part of the standard kselftest run. With udp, msg_zerocopy has no control channel. Ensure that the receiver exits after the sender by accounting for the initial delay in starting them (in msg_zerocopy.sh). Signed-off-by: Willem de Bruijn Signed-off-by: David S. Miller

selftests: add functionals test for UDP GRO

2018-11-08T00:23:05Z

Extends the existing udp programs to allow checking for proper GRO aggregation/GSO size, and run the tests via a shell script, using a veth pair with XDP program attached to trigger the GRO code path. rfc v3 -> v1: - use ip route to attach the xdp helper to the veth rfc v2 -> rfc v3: - add missing test program options documentation - fix sporatic test failures (receiver faster than sender) Signed-off-by: Paolo Abeni Signed-off-by: David S. Miller

selftests: udpgso_bench.sh explicitly requires bash

2018-10-11T17:19:46Z

The udpgso_bench.sh script requires several bash-only features. This may cause random failures if the default shell is not bash. Address the above explicitly requiring bash as the script interpreter Fixes: 3a687bef148d ("selftests: udp gso benchmark") Signed-off-by: Paolo Abeni Acked-by: Willem de Bruijn Signed-off-by: David S. Miller

selftests: in udpgso_bench do not test udp zerocopy

2018-07-12T23:56:50Z

The udpgso benchmark compares various configurations of UDP and TCP. Including one that is not upstream, udp zerocopy. This is a leftover from the earlier RFC patchset. The test is part of kselftests and run in continuous spinners. Remove the failing case to make the test start passing. Fixes: 3a687bef148d ("selftests: udp gso benchmark") Reported-by: Naresh Kamboju Signed-off-by: Willem de Bruijn Signed-off-by: David S. Miller

selftests: udp gso benchmark

2018-04-26T19:09:52Z

Send udp data between a source and sink, optionally with udp gso. The two processes are expected to be run on separate hosts. A script is included that runs them together over loopback in a single namespace for functionality testing. Signed-off-by: Willem de Bruijn Signed-off-by: David S. Miller