kernel/tools/testing/selftests/net/pmtu.sh, branch linux-5.2.y

selftests: pmtu: Fix encapsulating device in pmtu_vti6_link_change_mtu

2019-05-29T00:15:06Z

In the pmtu_vti6_link_change_mtu test, both local and remote addresses for the vti6 tunnel are assigned to the same address given to the dummy interface that we use as encapsulating device with a known MTU. This works as long as the dummy interface is actually selected, via rt6_lookup(), as encapsulating device. But if the remote address of the tunnel is a local address too, the loopback interface could also be selected, and there's nothing wrong with it. This is what some older -stable kernels do (3.18.z, at least), and nothing prevents us from subtly changing FIB implementation to revert back to that behaviour in the future. Define an IPv6 prefix instead, and use two separate addresses as local and remote for vti6, so that the encapsulating device can't be a loopback interface. Reported-by: Xiumei Mu Fixes: 1fad59ea1c34 ("selftests: pmtu: Add pmtu_vti6_link_change_mtu test") Signed-off-by: Stefano Brivio Signed-off-by: David S. Miller

selftests: pmtu.sh: Remove quotes around commands in setup_xfrm

2019-05-16T21:28:22Z

The first command in setup_xfrm is failing resulting in the test getting skipped: + ip netns exec ns-B ip -6 xfrm state add src fd00:1::a dst fd00:1::b spi 0x1000 proto esp aead 'rfc4106(gcm(aes))' 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode tunnel + out=RTNETLINK answers: Function not implemented ... xfrm6 not supported TEST: vti6: PMTU exceptions [SKIP] xfrm4 not supported TEST: vti4: PMTU exceptions [SKIP] ... The setup command started failing when the run_cmd option was added. Removing the quotes fixes the problem: ... TEST: vti6: PMTU exceptions [ OK ] TEST: vti4: PMTU exceptions [ OK ] ... Fixes: 56490b623aa0 ("selftests: Add debugging options to pmtu.sh") Signed-off-by: David Ahern Signed-off-by: David S. Miller

selftests: Add debugging options to pmtu.sh

2019-04-12T04:32:00Z

pmtu.sh script runs a number of tests and dumps a summary of pass/fail. If a test fails, it is near impossible to debug why. For example: TEST: ipv6: PMTU exceptions [FAIL] There are a lot of commands run behind the scenes for this test. Which one is failing? Add a VERBOSE option to show commands that are run and any output from those commands. Add a PAUSE_ON_FAIL option to halt the script if a test fails allowing users to poke around with the setup in the failed state. In the process, rename tracing to TRACING and move declaration to top with the new variables. Signed-off-by: David Ahern Reviewed-by: Stefano Brivio Signed-off-by: David S. Miller

selftests: pmtu: add explicit tests for PMTU exceptions cleanup

2019-02-28T05:28:59Z

Add a couple of new tests, explicitly checking that the kernel timely releases PMTU exceptions on related device removal. This is mostly a regression test vs the issue fixed by commit f5b51fe804ec ("ipv6: route: purge exception on removal") Only 2 new test cases have been added, instead of extending all the existing ones, because the reproducer requires executing several commands and would slow down too much the tests otherwise. v2 -> v3: - more cleanup, still from Stefano v1 -> v2: - several script cleanups, as suggested by Stefano Signed-off-by: Paolo Abeni Reviewed-by: David Ahern Signed-off-by: David S. Miller

selftests: pmtu: disable DAD in all namespaces

2019-02-28T05:28:59Z

Otherwise, the configured IPv6 address could be still "tentative" at test time, possibly causing tests failures. We can also drop some sleep along the code and decrease the timeout for most commands so that the test runtime decreases. v1 -> v2: - fix comment (Stefano) Fixes: d1f1b9cbf34c ("selftests: net: Introduce first PMTU test") Signed-off-by: Paolo Abeni Reviewed-by: David Ahern Signed-off-by: David S. Miller

selftests: pmtu: Introduce FoU and GUE PMTU exceptions tests

2018-11-09T01:13:08Z

Introduce eight tests, for FoU and GUE, with IPv4 and IPv6 payload, on IPv4 and IPv6 transport, that check that PMTU exceptions are created with the right value when exceeding the MTU on a link of the path. Signed-off-by: Stefano Brivio Reviewed-by: Sabrina Dubroca Signed-off-by: David S. Miller

selftests: pmtu: Introduce tests for IPv4/IPv6 over GENEVE over IPv4/IPv6

2018-11-09T01:13:08Z

Use a router between endpoints, implemented via namespaces, set a low MTU between router and destination endpoint, exceed it and check PMTU value in route exceptions. v2: - Introduce IPv4 tests right away, if iproute2 doesn't support the 'df' link option they will be skipped (David Ahern) Signed-off-by: Stefano Brivio Reviewed-by: Sabrina Dubroca Signed-off-by: David S. Miller

selftests: pmtu: Introduce tests for IPv4/IPv6 over VXLAN over IPv4/IPv6

2018-11-09T01:13:08Z

Use a router between endpoints, implemented via namespaces, set a low MTU between router and destination endpoint, exceed it and check PMTU value in route exceptions. v2: - Change all occurrences of VxLAN to VXLAN (Jiri Benc) - Introduce IPv4 tests right away, if iproute2 doesn't support the 'df' link option they will be skipped (David Ahern) Signed-off-by: Stefano Brivio Reviewed-by: Sabrina Dubroca Signed-off-by: David S. Miller

selftests: pmtu: Add optional traffic captures for single tests

2018-10-16T05:37:28Z

If --trace is passed as an option and tcpdump is available, capture traffic for all relevant interfaces to per-test pcap files named _.pcap. Signed-off-by: Stefano Brivio Reviewed-by: Sabrina Dubroca Signed-off-by: David S. Miller

selftests: pmtu: Allow selection of single tests

2018-10-16T05:37:28Z

As number of tests is growing, it's quite convenient to allow single tests to be run. Display usage when the script is run with any invalid argument, keep existing semantics when no arguments are passed so that automated runs won't break. Instead of just looping on the list of requested tests, if any, check first that they exist, and go through them in a nested loop to keep the existing way to display test descriptions. Signed-off-by: Stefano Brivio Reviewed-by: Sabrina Dubroca Signed-off-by: David S. Miller