kernel/tools/testing/selftests/kvm/lib, branch linux-6.2.y

KVM: selftests: Mark correct page as mapped in virt_map()

2022-12-27T11:00:50Z

The loop marks vaddr as mapped after incrementing it by page size, thereby marking the *next* page as mapped. Set the bit in vpages_mapped first instead. Fixes: 56fc7732031d ("KVM: selftests: Fill in vm->vpages_mapped bitmap in virt_map() too") Signed-off-by: Oliver Upton Message-Id: <20221209015307.1781352-4-oliver.upton@linux.dev> Signed-off-by: Paolo Bonzini

KVM: arm64: selftests: Don't identity map the ucall MMIO hole

2022-12-27T11:00:50Z

Currently the ucall MMIO hole is placed immediately after slot0, which is a relatively safe address in the PA space. However, it is possible that the same address has already been used for something else (like the guest program image) in the VA space. At least in my own testing, building the vgic_irq test with clang leads to the MMIO hole appearing underneath gicv3_ops. Stop identity mapping the MMIO hole and instead find an unused VA to map to it. Yet another subtle detail of the KVM selftests library is that virt_pg_map() does not update vm->vpages_mapped. Switch over to virt_map() instead to guarantee that the chosen VA isn't to something else. Signed-off-by: Oliver Upton Message-Id: <20221209015307.1781352-6-oliver.upton@linux.dev> Signed-off-by: Paolo Bonzini

KVM: selftests: document the default implementation of vm_vaddr_populate_bitmap

2022-12-27T11:00:49Z

Explain the meaning of the bit manipulations of vm_vaddr_populate_bitmap. These correspond to the "canonical addresses" of x86 and other architectures, but that is not obvious. Signed-off-by: Paolo Bonzini

KVM: selftests: Use magic value to signal ucall_alloc() failure

2022-12-27T11:00:49Z

Use a magic value to signal a ucall_alloc() failure instead of simply doing GUEST_ASSERT(). GUEST_ASSERT() relies on ucall_alloc() and so a failure puts the guest into an infinite loop. Use -1 as the magic value, as a real ucall struct should never wrap. Reported-by: Oliver Upton Signed-off-by: Sean Christopherson Signed-off-by: Paolo Bonzini

KVM: selftests: Fix a typo in x86-64's kvm_get_cpu_address_width()

2022-12-27T11:00:46Z

Fix a == vs. = typo in kvm_get_cpu_address_width() that results in @pa_bits being left unset if the CPU doesn't support enumerating its MAX_PHY_ADDR. Flagged by clang's unusued-value warning. lib/x86_64/processor.c:1034:51: warning: expression result unused [-Wunused-value] *pa_bits == kvm_cpu_has(X86_FEATURE_PAE) ? 36 : 32; Fixes: 3bd396353d18 ("KVM: selftests: Add X86_FEATURE_PAE and use it calc "fallback" MAXPHYADDR") Signed-off-by: Sean Christopherson Reviewed-by: Philippe Mathieu-Daudé Message-Id: <20221213001653.3852042-6-seanjc@google.com> Signed-off-by: Paolo Bonzini

Merge remote-tracking branch 'kvm/queue' into HEAD

2022-12-12T20:54:07Z

x86 Xen-for-KVM: * Allow the Xen runstate information to cross a page boundary * Allow XEN_RUNSTATE_UPDATE flag behaviour to be configured * add support for 32-bit guests in SCHEDOP_poll x86 fixes: * One-off fixes for various emulation flows (SGX, VMXON, NRIPS=0). * Reinstate IBPB on emulated VM-Exit that was incorrectly dropped a few years back when eliminating unnecessary barriers when switching between vmcs01 and vmcs02. * Clean up the MSR filter docs. * Clean up vmread_error_trampoline() to make it more obvious that params must be passed on the stack, even for x86-64. * Let userspace set all supported bits in MSR_IA32_FEAT_CTL irrespective of the current guest CPUID. * Fudge around a race with TSC refinement that results in KVM incorrectly thinking a guest needs TSC scaling when running on a CPU with a constant TSC, but no hardware-enumerated TSC frequency. * Advertise (on AMD) that the SMM_CTL MSR is not supported * Remove unnecessary exports Selftests: * Fix an inverted check in the access tracking perf test, and restore support for asserting that there aren't too many idle pages when running on bare metal. * Fix an ordering issue in the AMX test introduced by recent conversions to use kvm_cpu_has(), and harden the code to guard against similar bugs in the future. Anything that tiggers caching of KVM's supported CPUID, kvm_cpu_has() in this case, effectively hides opt-in XSAVE features if the caching occurs before the test opts in via prctl(). * Fix build errors that occur in certain setups (unsure exactly what is unique about the problematic setup) due to glibc overriding static_assert() to a variant that requires a custom message. * Introduce actual atomics for clear/set_bit() in selftests Documentation: * Remove deleted ioctls from documentation * Various fixes

KVM: selftests: Allocate ucall pool from MEM_REGION_DATA

2022-12-09T08:13:39Z

MEM_REGION_TEST_DATA is meant to hold data explicitly used by a selftest, not implicit allocations due to the selftests infrastructure. Allocate the ucall pool from MEM_REGION_DATA much like the rest of the selftests library allocations. Fixes: 426729b2cf2e ("KVM: selftests: Add ucall pool based implementation") Signed-off-by: Oliver Upton Message-Id: <20221207214809.489070-5-oliver.upton@linux.dev> Signed-off-by: Paolo Bonzini

KVM: arm64: selftests: Align VA space allocator with TTBR0

2022-12-09T08:13:35Z

An interesting feature of the Arm architecture is that the stage-1 MMU supports two distinct VA regions, controlled by TTBR{0,1}_EL1. As KVM selftests on arm64 only uses TTBR0_EL1, the VA space is constrained to [0, 2^(va_bits-1)). This is different from other architectures that allow for addressing low and high regions of the VA space from a single page table. KVM selftests' VA space allocator presumes the valid address range is split between low and high memory based the MSB, which of course is a poor match for arm64's TTBR0 region. Allow architectures to override the default VA space layout. Make use of the override to align vpages_valid with the behavior of TTBR0 on arm64. Signed-off-by: Oliver Upton Message-Id: <20221207214809.489070-4-oliver.upton@linux.dev> Signed-off-by: Paolo Bonzini

Merge tag 'kvmarm-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

2022-12-09T08:12:12Z

KVM/arm64 updates for 6.2 - Enable the per-vcpu dirty-ring tracking mechanism, together with an option to keep the good old dirty log around for pages that are dirtied by something other than a vcpu. - Switch to the relaxed parallel fault handling, using RCU to delay page table reclaim and giving better performance under load. - Relax the MTE ABI, allowing a VMM to use the MAP_SHARED mapping option, which multi-process VMMs such as crosvm rely on. - Merge the pKVM shadow vcpu state tracking that allows the hypervisor to have its own view of a vcpu, keeping that state private. - Add support for the PMUv3p5 architecture revision, bringing support for 64bit counters on systems that support it, and fix the no-quite-compliant CHAIN-ed counter support for the machines that actually exist out there. - Fix a handful of minor issues around 52bit VA/PA support (64kB pages only) as a prefix of the oncoming support for 4kB and 16kB pages. - Add/Enable/Fix a bunch of selftests covering memslots, breakpoints, stage-2 faults and access tracking. You name it, we got it, we probably broke it. - Pick a small set of documentation and spelling fixes, because no good merge window would be complete without those. As a side effect, this tag also drags: - The 'kvmarm-fixes-6.1-3' tag as a dependency to the dirty-ring series - A shared branch with the arm64 tree that repaints all the system registers to match the ARM ARM's naming, and resulting in interesting conflicts

Merge branch kvm-arm64/dirty-ring into kvmarm-master/next

2022-12-05T14:19:50Z

* kvm-arm64/dirty-ring: : . : Add support for the "per-vcpu dirty-ring tracking with a bitmap : and sprinkles on top", courtesy of Gavin Shan. : : This branch drags the kvmarm-fixes-6.1-3 tag which was already : merged in 6.1-rc4 so that the branch is in a working state. : . KVM: Push dirty information unconditionally to backup bitmap KVM: selftests: Automate choosing dirty ring size in dirty_log_test KVM: selftests: Clear dirty ring states between two modes in dirty_log_test KVM: selftests: Use host page size to map ring buffer in dirty_log_test KVM: arm64: Enable ring-based dirty memory tracking KVM: Support dirty ring in conjunction with bitmap KVM: Move declaration of kvm_cpu_dirty_log_size() to kvm_dirty_ring.h KVM: x86: Introduce KVM_REQ_DIRTY_RING_SOFT_FULL Signed-off-by: Marc Zyngier