kernel/tools/testing/selftests/drivers/net/ocelot, branch linux-rolling-stable

selftests: net: tsn_lib: add window_size argument to isochron_do()

2025-04-29T21:44:34Z

Make out-of-band testing (send a packet when its traffic class gate is closed, expecting it to be delayed) more predictable by allowing the window size to be customized by isochron_do(). From man isochron-send, the window size alters the advance time (the delta between the transmission time of the packet, and its expected TX time when using SO_TXTIME or tc-taprio on the sender). In absence of the argument, isochron-send defaults to maximizing the advance time (making it equal to the cycle length). The default behavior is exactly what is problematic. An advance time that is too large will make packets intended to be out-of-band still be potentially in-band with an open gate from the schedule's previous cycle. We need to allow that advance time to be reduced. Perhaps a bit confusingly, isochron_do() has a shift_time argument currently, but that does not help here. The shift time shifts both the user space wakeup time and the expected TX time by equal amounts, it is unable of bringing them closer to one another. Set the window size properly for the Ocelot PSFP selftest as well. That used to work due to a very carefully chosen SHIFT_TIME_NS. I've re-tested that the test still works properly. Signed-off-by: Vladimir Oltean Link: https://patch.msgid.link/20250426144859.3128352-4-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski

selftests: net: tsn_lib: create common helper for counting received packets

2025-04-29T21:44:34Z

This snippet will be necessary for a future isochron-based test, so provide a simpler high-level interface for counting the received packets. Signed-off-by: Vladimir Oltean Link: https://patch.msgid.link/20250426144859.3128352-3-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski

selftests: ocelot: tc_flower_chains: make test_vlan_ingress_modify() more comprehensive

2023-02-07T11:20:21Z

We have two IS1 filters of the OCELOT_VCAP_KEY_ANY key type (the one with "action vlan pop" and the one with "action vlan modify") and one of the OCELOT_VCAP_KEY_IPV4 key type (the one with "action skbedit priority"). But we have no IS1 filter with the OCELOT_VCAP_KEY_ETYPE key type, and there was an uncaught breakage there. To increase test coverage, convert one of the OCELOT_VCAP_KEY_ANY filters to OCELOT_VCAP_KEY_ETYPE, by making the filter also match on the MAC SA of the traffic sent by mausezahn, $h1_mac. Signed-off-by: Vladimir Oltean Link: https://lore.kernel.org/r/20230205192409.1796428-2-vladimir.oltean@nxp.com Signed-off-by: Paolo Abeni

selftests: net: tsn_lib: run phc2sys in automatic mode

2022-09-26T20:22:01Z

We can make the phc2sys helper not only synchronize a PHC to CLOCK_REALTIME, which is what it currently does, but also CLOCK_REALTIME to a PHC, which is going to be needed in distributed TSN tests. Instead of making the complexity of the arguments passed to phc2sys_start() explode, we can let it figure out the sync direction automatically, based on ptp4l's port states. Towards that goal, pass just the path to the desired ptp4l instance's UNIX domain socket, and remove the $if_name argument (from which it derives the PHC). Also adapt the one caller from the ocelot psfp.sh test. In the case of psfp.sh, phc2sys_start is able to properly figure out that CLOCK_REALTIME is the source clock and swp1's PHC is the destination, because of the way in which ptp4l_start for the UDS_ADDRESS_SWP1 was called: with slave_only=false, so it will always win the BMCA and always become the sync master between itself and $h1. Signed-off-by: Vladimir Oltean Reviewed-by: Kurt Kanzenbach Signed-off-by: Jakub Kicinski

selftests: ocelot: tc_flower_chains: reorder interfaces

2022-05-22T21:14:13Z

Use the standard interface order h1, swp1, swp2, h2 that is used by the forwarding selftest framework. The previous order was confusing even with the ASCII drawing. That isn't needed anymore. This also drops the fixed MAC addresses and uses STABLE_MAC_ADDRS, which ensures the MAC addresses are unique. Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller

selftests: ocelot: tc_flower_chains: use conventional interface names

2022-05-22T21:14:13Z

This is a robotic rename as follows: eth0 -> swp1 eth1 -> swp2 eth2 -> h2 eth3 -> h1 This brings the selftest more in line with the other forwarding selftests, where h1 is connected to swp1, and h2 to swp2. Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller

selftests: ocelot: tc_flower_chains: streamline test output

2022-05-22T21:14:13Z

Bring this driver-specific selftest output in line with the other selftests. Before: Testing VLAN pop.. OK Testing VLAN push.. OK Testing ingress VLAN modification.. OK Testing egress VLAN modification.. OK Testing frame prioritization.. OK After: TEST: VLAN pop [ OK ] TEST: VLAN push [ OK ] TEST: Ingress VLAN modification [ OK ] TEST: Egress VLAN modification [ OK ] TEST: Frame prioritization [ OK ] Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2022-05-05T20:03:18Z

tools/testing/selftests/net/forwarding/Makefile f62c5acc800e ("selftests/net/forwarding: add missing tests to Makefile") 50fe062c806e ("selftests: forwarding: new test, verify host mdb entries") https://lore.kernel.org/all/20220502111539.0b7e4621@canb.auug.org.au/ Signed-off-by: Jakub Kicinski

selftests: ocelot: tc_flower_chains: specify conform-exceed action for policer

2022-05-05T02:40:19Z

As discussed here with Ido Schimmel: https://patchwork.kernel.org/project/netdevbpf/patch/20220224102908.5255-2-jianbol@nvidia.com/ the default conform-exceed action is "reclassify", for a reason we don't really understand. The point is that hardware can't offload that police action, so not specifying "conform-exceed" was always wrong, even though the command used to work in hardware (but not in software) until the kernel started adding validation for it. Fix the command used by the selftest by making the policer drop on exceed, and pass the packet to the next action (goto) on conform. Fixes: 8cd6b020b644 ("selftests: ocelot: add some example VCAP IS1, IS2 and ES0 tc offloads") Signed-off-by: Vladimir Oltean Reviewed-by: Ido Schimmel Link: https://lore.kernel.org/r/20220503121428.842906-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski

selftests: forwarding: add basic QoS classification test for Ocelot switches

2022-05-04T00:24:45Z

Test basic (port-default, VLAN PCP and IP DSCP) QoS classification for Ocelot switches. Advanced QoS classification using tc filters is covered by tc_flower_chains.sh in the same directory. Signed-off-by: Vladimir Oltean Link: https://lore.kernel.org/r/20220502155424.4098917-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski