kernel/tools/testing/selftests/drivers/net/hw/tso.py, branch linux-rolling-stable

selftests: drv-net: tso: increase the retransmit threshold

2025-08-20T00:49:21Z

We see quite a few flakes during the TSO test against virtualized devices in NIPA. There's often 10-30 retransmissions during the test. Sometimes as many as 100. Set the retransmission threshold at 1/4th of the wire frame target. Link: https://patch.msgid.link/20250815224100.363438-1-kuba@kernel.org Signed-off-by: Jakub Kicinski

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2025-07-26T18:49:45Z

Merge in late fixes to prepare for the 6.17 net-next PR. Conflicts: net/core/neighbour.c 1bbb76a89948 ("neighbour: Fix null-ptr-deref in neigh_flush_dev().") 13a936bb99fb ("neighbour: Protect tbl->phash_buckets[] with a dedicated mutex.") 03dc03fa0432 ("neighbor: Add NTF_EXT_VALIDATED flag for externally validated entries") Adjacent changes: drivers/net/usb/usbnet.c 0d9cfc9b8cb1 ("net: usbnet: Avoid potential RCU stall on LINK_CHANGE event") 2c04d279e857 ("net: usb: Convert tasklet API to new bottom half workqueue mechanism") net/ipv6/route.c 31d7d67ba127 ("ipv6: annotate data-races around rt->fib6_nsiblings") 1caf27297215 ("ipv6: adopt dst_dev() helper") 3b3ccf9ed05e ("net: Remove unnecessary NULL check for lwtunnel_fill_encap()") Signed-off-by: Jakub Kicinski

selftests: drv-net: tso: fix non-tunneled tso6 test case name

2025-07-25T01:55:08Z

The non-tunneled tso6 test case was showing up as: ok 8 tso.ipv4 This is because of the way test_builder() uses the inner_ipver arg in test naming, and how test_info is iterated over in main(). Given that some tunnels not supported yet, e.g. ipip or sit, only support ipv4 or ipv6 as the inner network protocol, I think the best fix here is to call test_builder() in separate branches for tunneled and non-tunneled tests, and to make supported inner l3 types an explicit attribute of tunnel test cases. # Detected qstat for LSO wire-packets TAP version 13 1..14 ok 1 tso.ipv4 # Testing with mangleid enabled ok 2 tso.vxlan4_ipv4 ok 3 tso.vxlan4_ipv6 # Testing with mangleid enabled ok 4 tso.vxlan_csum4_ipv4 ok 5 tso.vxlan_csum4_ipv6 # Testing with mangleid enabled ok 6 tso.gre4_ipv4 ok 7 tso.gre4_ipv6 ok 8 tso.ipv6 # Testing with mangleid enabled ok 9 tso.vxlan6_ipv4 ok 10 tso.vxlan6_ipv6 # Testing with mangleid enabled ok 11 tso.vxlan_csum6_ipv4 ok 12 tso.vxlan_csum6_ipv6 # Testing with mangleid enabled ok 13 tso.gre6_ipv4 ok 14 tso.gre6_ipv6 # Totals: pass:14 fail:0 xfail:0 xpass:0 skip:0 error:0 Fixes: 0d0f4174f6c8 ("selftests: drv-net: add a simple TSO test") Signed-off-by: Daniel Zahka Link: https://patch.msgid.link/20250723184740.4075410-4-daniel.zahka@gmail.com Signed-off-by: Jakub Kicinski

selftests: drv-net: tso: fix vxlan tunnel flags to get correct gso_type

2025-07-25T01:55:08Z

When vxlan is used with ipv6 as the outer network header, the correct ip link parameters for acheiving the SKB_GSO_UDP_TUNNEL gso type is "udp6zerocsumtx udp6zerocsumrx". Otherwise the gso type will be SKB_GSO_UDP_TUNNEL_CSUM. This bug was the reason for the second of the three possible invocations of run_one_stream() invocations, so that can be deleted as well. We only need to test with the feature off and on. Fixes: 0d0f4174f6c8 ("selftests: drv-net: add a simple TSO test") Signed-off-by: Daniel Zahka Link: https://patch.msgid.link/20250723184740.4075410-3-daniel.zahka@gmail.com Signed-off-by: Jakub Kicinski

selftests: drv-net: tso: enable test cases based on hw_features

2025-07-25T01:55:08Z

tso.py uses the active features at the time of test execution as the set of available gso features to test. This means if a gso feature is supported but toggled off at test start, the test will be skipped with a "Device does not support {feature}" message. Instead, we can enumerate the set of toggleable features by capturing the driver's hw_features bitmap. To avoid configuration side-effects from running the test, we also snapshot the wanted_features flag set before making any feature changes, and then attempt to restore the same set of wanted_features before test exit. Fixes: 0d0f4174f6c8 ("selftests: drv-net: add a simple TSO test") Signed-off-by: Daniel Zahka Link: https://patch.msgid.link/20250723184740.4075410-2-daniel.zahka@gmail.com Signed-off-by: Jakub Kicinski

selftests: drv-net: Make command requirements explicit

2025-07-25T01:52:00Z

Make require_cmd() calls explicit about whether commands are needed locally, remotely, or both. Since require_cmd() defaults to local=True, tests should explicitly set local=False when commands are only needed remotely. - socat: Set local=False since it's only needed on remote hosts. - iperf3: Use single call with both local=True and remote=True since it's needed on both hosts. This avoids unnecessary test failures when commands are missing locally but available remotely where actually needed, and consolidates a duplicate require_cmd() call into single call that checks both hosts. Fixes: 0d0f4174f6c8 ("selftests: drv-net: add a simple TSO test") Fixes: f1e68a1a4a40 ("selftests: drv-net: add require_XYZ() helpers for validating env") Fixes: c76bab22e920 ("selftests: drv-net: rss_input_xfrm: Check test prerequisites before running") Reviewed-by: Nimrod Oren Signed-off-by: Gal Pressman Link: https://patch.msgid.link/20250723135454.649342-3-gal@nvidia.com Signed-off-by: Jakub Kicinski

selftests: drv-net: tso: make bkg() wait for socat to quit

2025-06-05T15:01:00Z

Commit 846742f7e32f ("selftests: drv-net: add a warning for bkg + shell + terminate") added a warning for bkg() used with terminate=True. The tso test was missed as we didn't have it running anywhere in NIPA. Add exit_wait=True, to avoid: # Warning: combining shell and terminate is risky! # SIGTERM may not reach the child on zsh/ksh! getting printed twice for every variant. Fixes: 0d0f4174f6c8 ("selftests: drv-net: add a simple TSO test") Reviewed-by: Willem de Bruijn Link: https://patch.msgid.link/20250604012055.891431-1-kuba@kernel.org Signed-off-by: Jakub Kicinski

selftests: drv-net: tso: fix the GRE device name

2025-06-05T15:00:55Z

The device type for IPv4 GRE is "gre" not "ipgre", unlike for IPv6 which uses "ip6gre". Not sure how I missed this when writing the test, perhaps because all HW I have access to is on an IPv6-only network. Fixes: 0d0f4174f6c8 ("selftests: drv-net: add a simple TSO test") Reviewed-by: Simon Horman Reviewed-by: Willem de Bruijn Link: https://patch.msgid.link/20250604012031.891242-1-kuba@kernel.org Signed-off-by: Jakub Kicinski

selftests: drv-net: add a simple TSO test

2025-02-20T03:08:50Z

Add a simple test for TSO. Send a few MB of data and check device stats to verify that the device was performing segmentation. Do the same thing over a few tunnel types. Injecting GSO packets directly would give us more ability to test corner cases, but perhaps starting simple is good enough? # ./ksft-net-drv/drivers/net/hw/tso.py # Detected qstat for LSO wire-packets KTAP version 1 1..14 ok 1 tso.ipv4 # SKIP Test requires IPv4 connectivity ok 2 tso.vxlan4_ipv4 # SKIP Test requires IPv4 connectivity ok 3 tso.vxlan6_ipv4 # SKIP Test requires IPv4 connectivity ok 4 tso.vxlan_csum4_ipv4 # SKIP Test requires IPv4 connectivity ok 5 tso.vxlan_csum6_ipv4 # SKIP Test requires IPv4 connectivity ok 6 tso.gre4_ipv4 # SKIP Test requires IPv4 connectivity ok 7 tso.gre6_ipv4 # SKIP Test requires IPv4 connectivity ok 8 tso.ipv6 ok 9 tso.vxlan4_ipv6 ok 10 tso.vxlan6_ipv6 ok 11 tso.vxlan_csum4_ipv6 ok 12 tso.vxlan_csum6_ipv6 # Testing with mangleid enabled ok 13 tso.gre4_ipv6 ok 14 tso.gre6_ipv6 # Totals: pass:7 fail:0 xfail:0 xpass:0 skip:7 error:0 Note that the test currently depends on the driver reporting the LSO count via qstat, which appears to be relatively rare (virtio, cisco/enic, sfc/efc; but virtio needs host support). Reviewed-by: Willem de Bruijn Link: https://patch.msgid.link/20250218225426.77726-5-kuba@kernel.org Signed-off-by: Jakub Kicinski