kernel/tools/testing/selftests/bpf/progs, branch linux-rolling-stable

bpf: collect only live registers in linked regs

2026-03-12T11:10:01Z

[ Upstream commit 2658a1720a1944fbaeda937000ad2b3c3dfaf1bb ] Fix an inconsistency between func_states_equal() and collect_linked_regs(): - regsafe() uses check_ids() to verify that cached and current states have identical register id mapping. - func_states_equal() calls regsafe() only for registers computed as live by compute_live_registers(). - clean_live_states() is supposed to remove dead registers from cached states, but it can skip states belonging to an iterator-based loop. - collect_linked_regs() collects all registers sharing the same id, ignoring the marks computed by compute_live_registers(). Linked registers are stored in the state's jump history. - backtrack_insn() marks all linked registers for an instruction as precise whenever one of the linked registers is precise. The above might lead to a scenario: - There is an instruction I with register rY known to be dead at I. - Instruction I is reached via two paths: first A, then B. - On path A: - There is an id link between registers rX and rY. - Checkpoint C is created at I. - Linked register set {rX, rY} is saved to the jump history. - rX is marked as precise at I, causing both rX and rY to be marked precise at C. - On path B: - There is no id link between registers rX and rY, otherwise register states are sub-states of those in C. - Because rY is dead at I, check_ids() returns true. - Current state is considered equal to checkpoint C, propagate_precision() propagates spurious precision mark for register rY along the path B. - Depending on a program, this might hit verifier_bug() in the backtrack_insn(), e.g. if rY ∈ [r1..r5] and backtrack_insn() spots a function call. The reproducer program is in the next patch. This was hit by sched_ext scx_lavd scheduler code. Changes in tests: - verifier_scalar_ids.c selftests need modification to preserve some registers as live for __msg() checks. - exceptions_assert.c adjusted to match changes in the verifier log, R0 is dead after conditional instruction and thus does not get range. - precise.c adjusted to match changes in the verifier log, register r9 is dead after comparison and it's range is not important for test. Reported-by: Emil Tsalapatis Fixes: 0fb3cf6110a5 ("bpf: use register liveness information for func_states_equal") Signed-off-by: Eduard Zingerman Link: https://lore.kernel.org/r/20260306-linked-regs-and-propagate-precision-v1-1-18e859be570d@gmail.com Signed-off-by: Alexei Starovoitov Signed-off-by: Sasha Levin

selftests/bpf: Fix OOB read in dmabuf_collector

2026-03-12T11:09:24Z

[ Upstream commit 6881af27f9ea0f5ca8f606f573ef5cc25ca31fe4 ] Dmabuf name allocations can be less than DMA_BUF_NAME_LEN characters, but bpf_probe_read_kernel always tries to read exactly that many bytes. If a name is less than DMA_BUF_NAME_LEN characters, bpf_probe_read_kernel will read past the end. bpf_probe_read_kernel_str stops at the first NUL terminator so use it instead, like iter_dmabuf_for_each already does. Fixes: ae5d2c59ecd7 ("selftests/bpf: Add test for dmabuf_iter") Reported-by: Jerome Lee Signed-off-by: T.J. Mercier Link: https://lore.kernel.org/r/20260225003349.113746-1-tjmercier@google.com Signed-off-by: Alexei Starovoitov Signed-off-by: Sasha Levin

selftests/bpf: add regression test for bpf_d_path()

2025-12-10T09:36:26Z

Add a regression test for bpf_d_path() to cover incorrect verifier assumptions caused by an incorrect function prototype. The test attaches to the fallocate hook, calls bpf_d_path() and verifies that a simple prefix comparison on the returned pathname behaves correctly after the fix in patch 1. It ensures the verifier does not assume the buffer remains unwritten. Co-developed-by: Zesen Liu Signed-off-by: Zesen Liu Co-developed-by: Peili Gao Signed-off-by: Peili Gao Co-developed-by: Haoran Ni Signed-off-by: Haoran Ni Signed-off-by: Shuran Liu Link: https://lore.kernel.org/r/20251206141210.3148-3-electronlsr@gmail.com Signed-off-by: Alexei Starovoitov

Merge tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2025-12-04T01:24:33Z

Pull networking updates from Jakub Kicinski: "Core & protocols: - Replace busylock at the Tx queuing layer with a lockless list. Resulting in a 300% (4x) improvement on heavy TX workloads, sending twice the number of packets per second, for half the cpu cycles. - Allow constantly busy flows to migrate to a more suitable CPU/NIC queue. Normally we perform queue re-selection when flow comes out of idle, but under extreme circumstances the flows may be constantly busy. Add sysctl to allow periodic rehashing even if it'd risk packet reordering. - Optimize the NAPI skb cache, make it larger, use it in more paths. - Attempt returning Tx skbs to the originating CPU (like we already did for Rx skbs). - Various data structure layout and prefetch optimizations from Eric. - Remove ktime_get() from the recvmsg() fast path, ktime_get() is sadly quite expensive on recent AMD machines. - Extend threaded NAPI polling to allow the kthread busy poll for packets. - Make MPTCP use Rx backlog processing. This lowers the lock pressure, improving the Rx performance. - Support memcg accounting of MPTCP socket memory. - Allow admin to opt sockets out of global protocol memory accounting (using a sysctl or BPF-based policy). The global limits are a poor fit for modern container workloads, where limits are imposed using cgroups. - Improve heuristics for when to kick off AF_UNIX garbage collection. - Allow users to control TCP SACK compression, and default to 33% of RTT. - Add tcp_rcvbuf_low_rtt sysctl to let datacenter users avoid unnecessarily aggressive rcvbuf growth and overshot when the connection RTT is low. - Preserve skb metadata space across skb_push / skb_pull operations. - Support for IPIP encapsulation in the nftables flowtable offload. - Support appending IP interface information to ICMP messages (RFC 5837). - Support setting max record size in TLS (RFC 8449). - Remove taking rtnl_lock from RTM_GETNEIGHTBL and RTM_SETNEIGHTBL. - Use a dedicated lock (and RCU) in MPLS, instead of rtnl_lock. - Let users configure the number of write buffers in SMC. - Add new struct sockaddr_unsized for sockaddr of unknown length, from Kees. - Some conversions away from the crypto_ahash API, from Eric Biggers. - Some preparations for slimming down struct page. - YAML Netlink protocol spec for WireGuard. - Add a tool on top of YAML Netlink specs/lib for reporting commonly computed derived statistics and summarized system state. Driver API: - Add CAN XL support to the CAN Netlink interface. - Add uAPI for reporting PHY Mean Square Error (MSE) diagnostics, as defined by the OPEN Alliance's "Advanced diagnostic features for 100BASE-T1 automotive Ethernet PHYs" specification. - Add DPLL phase-adjust-gran pin attribute (and implement it in zl3073x). - Refactor xfrm_input lock to reduce contention when NIC offloads IPsec and performs RSS. - Add info to devlink params whether the current setting is the default or a user override. Allow resetting back to default. - Add standard device stats for PSP crypto offload. - Leverage DSA frame broadcast to implement simple HSR frame duplication for a lot of switches without dedicated HSR offload. - Add uAPI defines for 1.6Tbps link modes. Device drivers: - Add Motorcomm YT921x gigabit Ethernet switch support. - Add MUCSE driver for N500/N210 1GbE NIC series. - Convert drivers to support dedicated ops for timestamping control, and away from the direct IOCTL handling. While at it support GET operations for PHY timestamping. - Add (and convert most drivers to) a dedicated ethtool callback for reading the Rx ring count. - Significant refactoring efforts in the STMMAC driver, which supports Synopsys turn-key MAC IP integrated into a ton of SoCs. - Ethernet high-speed NICs: - Broadcom (bnxt): - support PPS in/out on all pins - Intel (100G, ice, idpf): - ice: implement standard ethtool and timestamping stats - i40e: support setting the max number of MAC addresses per VF - iavf: support RSS of GTP tunnels for 5G and LTE deployments - nVidia/Mellanox (mlx5): - reduce downtime on interface reconfiguration - disable being an XDP redirect target by default (same as other drivers) to avoid wasting resources if feature is unused - Meta (fbnic): - add support for Linux-managed PCS on 25G, 50G, and 100G links - Wangxun: - support Rx descriptor merge, and Tx head writeback - support Rx coalescing offload - support 25G SPF and 40G QSFP modules - Ethernet virtual: - Google (gve): - allow ethtool to configure rx_buf_len - implement XDP HW RX Timestamping support for DQ descriptor format - Microsoft vNIC (mana): - support HW link state events - handle hardware recovery events when probing the device - Ethernet NICs consumer, and embedded: - usbnet: add support for Byte Queue Limits (BQL) - AMD (amd-xgbe): - add device selftests - NXP (enetc): - add i.MX94 support - Broadcom integrated MACs (bcmgenet, bcmasp): - bcmasp: add support for PHY-based Wake-on-LAN - Broadcom switches (b53): - support port isolation - support BCM5389/97/98 and BCM63XX ARL formats - Lantiq/MaxLinear switches: - support bridge FDB entries on the CPU port - use regmap for register access - allow user to enable/disable learning - support Energy Efficient Ethernet - support configuring RMII clock delays - add tagging driver for MaxLinear GSW1xx switches - Synopsys (stmmac): - support using the HW clock in free running mode - add Eswin EIC7700 support - add Rockchip RK3506 support - add Altera Agilex5 support - Cadence (macb): - cleanup and consolidate descriptor and DMA address handling - add EyeQ5 support - TI: - icssg-prueth: support AF_XDP - Airoha access points: - add missing Ethernet stats and link state callback - add AN7583 support - support out-of-order Tx completion processing - Power over Ethernet: - pd692x0: preserve PSE configuration across reboots - add support for TPS23881B devices - Ethernet PHYs: - Open Alliance OATC14 10BASE-T1S PHY cable diagnostic support - Support 50G SerDes and 100G interfaces in Linux-managed PHYs - micrel: - support for non PTP SKUs of lan8814 - enable in-band auto-negotiation on lan8814 - realtek: - cable testing support on RTL8224 - interrupt support on RTL8221B - motorcomm: support for PHY LEDs on YT853 - microchip: support for LAN867X Rev.D0 PHYs w/ SQI and cable diag - mscc: support for PHY LED control - CAN drivers: - m_can: add support for optional reset and system wake up - remove can_change_mtu() obsoleted by core handling - mcp251xfd: support GPIO controller functionality - Bluetooth: - add initial support for PASTa - WiFi: - split ieee80211.h file, it's way too big - improvements in VHT radiotap reporting, S1G, Channel Switch Announcement handling, rate tracking in mesh networks - improve multi-radio monitor mode support, and add a cfg80211 debugfs interface for it - HT action frame handling on 6 GHz - initial chanctx work towards NAN - MU-MIMO sniffer improvements - WiFi drivers: - RealTek (rtw89): - support USB devices RTL8852AU and RTL8852CU - initial work for RTL8922DE - improved injection support - Intel: - iwlwifi: new sniffer API support - MediaTek (mt76): - WED support for >32-bit DMA - airoha NPU support - regdomain improvements - continued WiFi7/MLO work - Qualcomm/Atheros: - ath10k: factory test support - ath11k: TX power insertion support - ath12k: BSS color change support - ath12k: statistics improvements - brcmfmac: Acer A1 840 tablet quirk - rtl8xxxu: 40 MHz connection fixes/support" * tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1381 commits) net: page_pool: sanitise allocation order net: page pool: xa init with destroy on pp init net/mlx5e: Support XDP target xmit with dummy program net/mlx5e: Update XDP features in switch channels selftests/tc-testing: Test CAKE scheduler when enqueue drops packets net/sched: sch_cake: Fix incorrect qlen reduction in cake_drop wireguard: netlink: generate netlink code wireguard: uapi: generate header with ynl-gen wireguard: uapi: move flag enums wireguard: uapi: move enum wg_cmd wireguard: netlink: add YNL specification selftests: drv-net: Fix tolerance calculation in devlink_rate_tc_bw.py selftests: drv-net: Fix and clarify TC bandwidth split in devlink_rate_tc_bw.py selftests: drv-net: Set shell=True for sysfs writes in devlink_rate_tc_bw.py selftests: drv-net: Use Iperf3Runner in devlink_rate_tc_bw.py selftests: drv-net: introduce Iperf3Runner for measurement use cases selftests: drv-net: Add devlink_rate_tc_bw.py to TEST_PROGS net: ps3_gelic_net: Use napi_alloc_skb() and napi_gro_receive() Documentation: net: dsa: mention simple HSR offload helpers Documentation: net: dsa: mention availability of RedBox ...

selftests/bpf: do not hardcode target rate in test_tc_edt BPF program

2025-11-29T17:37:41Z

test_tc_edt currently defines the target rate in both the userspace and BPF parts. This value could be defined once in the userspace part if we make it able to configure the BPF program before starting the test. Add a target_rate variable in the BPF part, and make the userspace part set it to the desired rate before attaching the shaping program. Signed-off-by: Alexis Lothoré (eBPF Foundation) Link: https://lore.kernel.org/r/20251128-tc_edt-v2-4-26db48373e73@bootlin.com Signed-off-by: Alexei Starovoitov

selftests/bpf: integrate test_tc_edt into test_progs

2025-11-29T17:37:41Z

test_tc_edt.sh uses a pair of veth and a BPF program attached to the TX veth to shape the traffic to 5MBps. It then checks that the amount of received bytes (at interface level), compared to the TX duration, indeed matches 5Mbps. Convert this test script to the test_progs framework: - keep the double veth setup, isolated in two veths - run a small tcp server, and connect client to server - push a pre-configured amount of bytes, and measure how much time has been needed to push those - ensure that this rate is in a 2% error margin around the target rate This two percent value, while being tight, is hopefully large enough to not make the test too flaky in CI, while also turning it into a small example of BPF-based shaping. Signed-off-by: Alexis Lothoré (eBPF Foundation) Link: https://lore.kernel.org/r/20251128-tc_edt-v2-2-26db48373e73@bootlin.com Signed-off-by: Alexei Starovoitov

selftests/bpf: rename test_tc_edt.bpf.c section to expose program type

2025-11-29T17:37:41Z

The test_tc_edt BPF program uses a custom section name, which works fine when manually loading it with tc, but prevents it from being loaded with libbpf. Update the program section name to "tc" to be able to manipulate it with a libbpf-based C test. Signed-off-by: Alexis Lothoré (eBPF Foundation) Link: https://lore.kernel.org/r/20251128-tc_edt-v2-1-26db48373e73@bootlin.com Signed-off-by: Alexei Starovoitov

selftests/bpf: Remove usage of lsm/file_alloc_security in selftest

2025-11-28T23:18:28Z

file_alloc_security hook is disabled. Use other LSM hooks in selftests instead. Signed-off-by: Amery Hung Link: https://lore.kernel.org/r/20251126202927.2584874-2-ameryhung@gmail.com Signed-off-by: Alexei Starovoitov

bpf: force BPF_F_RDONLY_PROG on insn array creation

2025-11-28T23:15:43Z

The original implementation added a hack to check_mem_access() to prevent programs from writing into insn arrays. To get rid of this hack, enforce BPF_F_RDONLY_PROG on map creation. Also fix the corresponding selftest, as the error message changes with this patch. Suggested-by: Alexei Starovoitov Signed-off-by: Anton Protopopov Link: https://lore.kernel.org/r/20251128063224.1305482-2-a.s.protopopov@gmail.com Signed-off-by: Alexei Starovoitov

tcp: remove icsk->icsk_retransmit_timer

2025-11-26T03:28:29Z

Now sk->sk_timer is no longer used by TCP keepalive, we can use its storage for TCP and MPTCP retransmit timers for better cache locality. Signed-off-by: Eric Dumazet Reviewed-by: Kuniyuki Iwashima Link: https://patch.msgid.link/20251124175013.1473655-5-edumazet@google.com Signed-off-by: Jakub Kicinski