kernel/tools/testing/nvdimm/Kbuild, branch linux-4.16.y

tools/testing/nvdimm: force nfit_test to depend on instrumented modules

2018-02-02T00:49:54Z

The libnvdimm unit tests will fail when they are run against the production / in-tree version of libnvdimm.ko or nfit.ko due to symbols not being mocked per nfit_test's expectation. For example, nfit_test expects acpi_evaluate_dsm() to be replaced by __wrap_acpi_evaluate_dsm() to test how acpi_nfit_ctl() responds to different stimuli. Create a test-only symbol name that nfit_test links against to cause module load failures when the wrong module is present. For example, with this change, attempts to use the wrong module will report: nfit_test: Unknown symbol libnvdimm_test (err 0) Reported-by: Dave Jiang Reported-by: Vishal Verma Signed-off-by: Dan Williams

Merge tag 'libnvdimm-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

2017-11-17T17:51:57Z

Pull libnvdimm and dax updates from Dan Williams: "Save for a few late fixes, all of these commits have shipped in -next releases since before the merge window opened, and 0day has given a build success notification. The ext4 touches came from Jan, and the xfs touches have Darrick's reviewed-by. An xfstest for the MAP_SYNC feature has been through a few round of reviews and is on track to be merged. - Introduce MAP_SYNC and MAP_SHARED_VALIDATE, a mechanism to enable 'userspace flush' of persistent memory updates via filesystem-dax mappings. It arranges for any filesystem metadata updates that may be required to satisfy a write fault to also be flushed ("on disk") before the kernel returns to userspace from the fault handler. Effectively every write-fault that dirties metadata completes an fsync() before returning from the fault handler. The new MAP_SHARED_VALIDATE mapping type guarantees that the MAP_SYNC flag is validated as supported by the filesystem's ->mmap() file operation. - Add support for the standard ACPI 6.2 label access methods that replace the NVDIMM_FAMILY_INTEL (vendor specific) label methods. This enables interoperability with environments that only implement the standardized methods. - Add support for the ACPI 6.2 NVDIMM media error injection methods. - Add support for the NVDIMM_FAMILY_INTEL v1.6 DIMM commands for latch last shutdown status, firmware update, SMART error injection, and SMART alarm threshold control. - Cleanup physical address information disclosures to be root-only. - Fix revalidation of the DIMM "locked label area" status to support dynamic unlock of the label area. - Expand unit test infrastructure to mock the ACPI 6.2 Translate SPA (system-physical-address) command and error injection commands. Acknowledgements that came after the commits were pushed to -next: - 957ac8c421ad ("dax: fix PMD faults on zero-length files"): Reviewed-by: Ross Zwisler - a39e596baa07 ("xfs: support for synchronous DAX faults") and 7b565c9f965b ("xfs: Implement xfs_filemap_pfn_mkwrite() using __xfs_filemap_fault()") Reviewed-by: Darrick J. Wong " * tag 'libnvdimm-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (49 commits) acpi, nfit: add 'Enable Latch System Shutdown Status' command support dax: fix general protection fault in dax_alloc_inode dax: fix PMD faults on zero-length files dax: stop requiring a live device for dax_flush() brd: remove dax support dax: quiet bdev_dax_supported() fs, dax: unify IOMAP_F_DIRTY read vs write handling policy in the dax core tools/testing/nvdimm: unit test clear-error commands acpi, nfit: validate commands against the device type tools/testing/nvdimm: stricter bounds checking for error injection commands xfs: support for synchronous DAX faults xfs: Implement xfs_filemap_pfn_mkwrite() using __xfs_filemap_fault() ext4: Support for synchronous DAX faults ext4: Simplify error handling in ext4_dax_huge_fault() dax: Implement dax_finish_sync_fault() dax, iomap: Add support for synchronous faults mm: Define MAP_SYNC and VM_SYNC flags dax: Allow tuning whether dax_insert_mapping_entry() dirties entry dax: Allow dax_iomap_fault() to return pfn dax: Fix comment describing dax_iomap_fault() ...

libnvdimm: move poison list functions to a new 'badrange' file

2017-11-02T17:42:30Z

nfit_test needs to use the poison list manipulation code as well. Make it more generic and in the process rename poison to badrange, and move all the related helpers to a new file. Signed-off-by: Dave Jiang [vishal: Add badrange.o to nfit_test's Kbuild] [vishal: add a missed include in bus.c for the new badrange functions] [vishal: rename all instances of 'be' to 'bre'] Signed-off-by: Vishal Verma Signed-off-by: Dan Williams

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

Merge branch 'for-4.12/dax' into libnvdimm-for-next

2017-05-05T06:38:43Z

dax: refactor dax-fs into a generic provider of 'struct dax_device' instances

2017-04-13T04:59:14Z

We want dax capable drivers to be able to publish a set of dax operations [1]. However, we do not want to further abuse block_devices to advertise these operations. Instead we will attach these operations to a dax device and add a lookup mechanism to go from block device path to a dax device. A dax capable driver like pmem or brd is responsible for registering a dax device, alongside a block device, and then a dax capable filesystem is responsible for retrieving the dax device by path name if it wants to call dax_operations. For now, we refactor the dax pseudo-fs to be a generic facility, rather than an implementation detail, of the device-dax use case. Where a "dax device" is just an inode + dax infrastructure, and "Device DAX" is a mapping service layered on top of that base 'struct dax_device'. "Filesystem DAX" is then a mapping service that layers a filesystem on top of that same base device. Filesystem DAX is associated with a block_device for now, but perhaps directly to a dax device in the future, or for new pmem-only filesystems. [1]: https://lkml.org/lkml/2017/1/19/880 Suggested-by: Christoph Hellwig Signed-off-by: Dan Williams

device-dax, tools/testing/nvdimm: enable device-dax with mock resources

2017-04-13T04:56:43Z

Provide a replacement pgoff_to_phys() that translates an nfit_test resource (allocated by vmalloc()) to a pfn. Signed-off-by: Dave Jiang Reviewed-by: Johannes Thumshirn Signed-off-by: Dan Williams

tools/testing/nvdimm: unit test acpi_nfit_ctl()

2016-12-07T01:42:36Z

A recent flurry of bug discoveries in the nfit driver's DSM marshalling routine has highlighted the fact that we do not have unit test coverage for this routine. Add a self-test of acpi_nfit_ctl() routine before probing the "nfit_test.0" device. This mocks stimulus to acpi_nfit_ctl() and if any of the tests fail "nfit_test.0" will be unavailable causing the rest of the tests to not run / fail. This unit test will also be a place to land reproductions of quirky BIOS behavior discovered in the field and ensure the kernel does not regress against implementations it has seen in practice. Signed-off-by: Dan Williams

tools/testing/nvdimm: unit test for acpi_nfit_notify()

2016-08-23T14:49:42Z

We have had a couple bugs in this implementation in the past and before we add another ->notify() implementation for nvdimm devices, lets allow this routine to be exercised via nfit_test. Rewrite acpi_nfit_notify() in terms of a generic struct device and acpi_handle parameter, and then implement a mock acpi_evaluate_object() that returns a _FIT payload. Cc: Vishal Verma Reviewed-by: Vishal Verma Acked-by: Rafael J. Wysocki Signed-off-by: Dan Williams

nfit: do an ARS scrub on hitting a latent media error

2016-07-24T15:04:04Z

When a latent (unknown to 'badblocks') error is encountered, it will trigger a machine check exception. On a system with machine check recovery, this will only SIGBUS the process(es) which had the bad page mapped (as opposed to a kernel panic on platforms without machine check recovery features). In the former case, we want to trigger a full rescan of that nvdimm bus. This will allow any additional, new errors to be captured in the block devices' badblocks lists, and offending operations on them can be trapped early, avoiding machine checks. This is done by registering a callback function with the x86_mce_decoder_chain and calling the new ars_rescan functionality with the address in the mce notificatiion. Cc: Rafael J. Wysocki Cc: Tony Luck Signed-off-by: Vishal Verma Signed-off-by: Dan Williams