kernel/tools/perf/util/top.c, branch linux-5.2.y

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 251

2019-06-05T15:30:26Z

Based on 1 normalized pattern(s): released under the gpl v2 and only v2 not any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 12 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Steve Winslow Reviewed-by: Alexios Zavras Reviewed-by: Kate Stewart Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141332.526460839@linutronix.de Signed-off-by: Greg Kroah-Hartman

perf top: Move perf_top__reset_sample_counters() to after counts display

2018-12-17T17:58:47Z

Move the perf_top__reset_sample_counters() call to right after we display the counters so we can see the updated numbers for longer. Signed-off-by: Jiri Olsa Acked-by: David S. Miller Acked-by: Namhyung Kim Cc: Alexander Shishkin Cc: Peter Zijlstra Link: https://lkml.kernel.org/n/tip-o72pyiwt05f3p2juprwmz2jo@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf top: Save and display the drop count stats

2018-12-17T17:58:33Z

Add drop count to 'perf top' headers: # perf top --stdio PerfTop: 3549 irqs/sec kernel:51.8% exact: 100.0% lost: 0/0 drop: 0/0 [4000Hz cycles:ppp], (all, 8 CPUs) # perf top Samples: 0 of event 'cycles:ppp', 4000 Hz, Event count (approx.): 0 lost: 0/0 drop: 0/0 The format is: / Signed-off-by: Jiri Olsa Acked-by: David S. Miller Acked-by: Namhyung Kim Cc: Alexander Shishkin Cc: Peter Zijlstra Link: http://lkml.kernel.org/n/tip-2lj87zz8tq9ye1ntax3ulw0n@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf top: Save and display the lost count stats

2018-12-17T17:57:36Z

Add a 'lost count' to 'perf top' headers: # perf top --stdio PerfTop: 3850 irqs/sec kernel:49.0% exact: 100.0% lost: 0/0 [4000Hz cycles:ppp], (all, 8 CPUs) # perf top Samples: 0 of event 'cycles:ppp', 4000 Hz, Event count (approx.): 0 lost: 0/0 The format is: / Signed-off-by: Jiri Olsa Acked-by: David S. Miller Acked-by: Namhyung Kim Tested-by: Arnaldo Carvalho de Melo Cc: Alexander Shishkin Cc: Peter Zijlstra Link: https://lkml.kernel.org/n/tip-zo11rn270gij5jtp8fknpf8u@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf tools: Rename 'perf_record_opts' to 'record_opts

2013-12-19T17:43:45Z

Reduce typing, functions use class__method convention, so unlikely to clash with other libraries. This actually was discussed in the "Link:" referenced message below. Cc: Adrian Hunter Cc: David Ahern Cc: Frederic Weisbecker Cc: Jiri Olsa Cc: Mike Galbraith Cc: Namhyung Kim Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lkml.kernel.org/r/20131112113427.GA4053@ghostprotocols.net Signed-off-by: Arnaldo Carvalho de Melo

perf target: Shorten perf_target to target

2013-11-12T19:51:03Z

Getting unwieldly long, for this app domain should be descriptive enough and the use of __ to separate the class from the method names should help with avoiding clashes with other code bases. Reported-by: David Ahern Suggested-by: Ingo Molnar Cc: Adrian Hunter Cc: David Ahern Cc: Frederic Weisbecker Cc: Jiri Olsa Cc: Mike Galbraith Cc: Namhyung Kim Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lkml.kernel.org/r/20131112113427.GA4053@ghostprotocols.net Signed-off-by: Arnaldo Carvalho de Melo

perf top: Fix percent output when no samples collected

2013-05-28T13:23:59Z

If there's no sample, kernel and exact percent output at the header looked like "-nan%". Tested-by: Jiri Olsa Signed-off-by: Namhyung Kim Cc: David Ahern Cc: Ingo Molnar Cc: Jiri Olsa Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lkml.kernel.org/r/1368497347-9628-3-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf top: Use perf_evlist__config()

2012-12-11T20:22:39Z

Using struct perf_record_opts to specify how to configure the evsel perf_event_attrs. This gets top closer to record in the way it sets up evsels, with the aim of sharing more and more to the point that both will be a single utility. In this direction top now uses the same callchain option parsing as record and that brings DWARF callchains to top, something that was already available for record. Cc: David Ahern Cc: Frederic Weisbecker Cc: Jiri Olsa Cc: Mike Galbraith Cc: Namhyung Kim Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lkml.kernel.org/n/tip-u03o0bsrqcjgskciso3pvsjr@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf evlist: Introduce evsel list accessors

2012-08-15T13:14:18Z

To replace the longer list_entry constructs for things that are widely used: perf_evlist__{first,last}(evlist) perf_evsel__next(evsel) Acked-by: Jiri Olsa Acked-by: Namhyung Kim Cc: David Ahern Cc: Frederic Weisbecker Cc: Jiri Olsa Cc: Mike Galbraith Cc: Namhyung Kim Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lkml.kernel.org/n/tip-ng7azq26wg1jd801qqpcozwp@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf tools: Move all users of event_name to perf_evsel__name

2012-06-19T16:06:20Z

So that we don't use global variables that could make us misreport event names when having a multi window top, for instance. Cc: David Ahern Cc: Frederic Weisbecker Cc: Jiri Olsa Cc: Mike Galbraith Cc: Namhyung Kim Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lkml.kernel.org/n/tip-mccancovi1u0wdkg8ncth509@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo