kernel/tools/perf/util/intel-pt-decoder, branch linux-4.15.y

Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2017-12-15T20:14:33Z

Pull x86 fixes from Ingo Molnar: "Misc fixes: - fix the s2ram regression related to confusion around segment register restoration, plus related cleanups that make the code more robust - a guess-unwinder Kconfig dependency fix - an isoimage build target fix for certain tool chain combinations - instruction decoder opcode map fixes+updates, and the syncing of the kernel decoder headers to the objtool headers - a kmmio tracing fix - two 5-level paging related fixes - a topology enumeration fix on certain SMP systems" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Resync objtool's instruction decoder source code copy with the kernel's latest version x86/decoder: Fix and update the opcodes map x86/power: Make restore_processor_context() sane x86/power/32: Move SYSENTER MSR restoration to fix_processor_context() x86/power/64: Use struct desc_ptr for the IDT in struct saved_context x86/unwinder/guess: Prevent using CONFIG_UNWINDER_GUESS=y with CONFIG_STACKDEPOT=y x86/build: Don't verify mtools configuration file for isoimage x86/mm/kmmio: Fix mmiotrace for page unaligned addresses x86/boot/compressed/64: Print error if 5-level paging is not supported x86/boot/compressed/64: Detect and handle 5-level paging at boot-time x86/smpboot: Do not use smp_num_siblings in __max_logical_packages calculation

x86/decoder: Fix and update the opcodes map

2017-12-15T12:45:20Z

Update x86-opcode-map.txt based on the October 2017 Intel SDM publication. Fix INVPID to INVVPID. Add UD0 and UD1 instruction opcodes. Also sync the objtool and perf tooling copies of this file. Signed-off-by: Randy Dunlap Acked-by: Masami Hiramatsu Cc: Josh Poimboeuf Cc: Linus Torvalds Cc: Masami Hiramatsu Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/aac062d7-c0f6-96e3-5c92-ed299e2bd3da@infradead.org Signed-off-by: Ingo Molnar

tooling/headers: Synchronize updated s390 and x86 UAPI headers

2017-12-06T21:45:24Z

There were two trivial updates to these upstream UAPI headers: arch/s390/include/uapi/asm/kvm.h arch/s390/include/uapi/asm/kvm_perf.h arch/x86/lib/x86-opcode-map.txt Synchronize them with their tooling copies. (The x86 opcode map includes a new instruction pattern now.) Cc: Arnaldo Carvalho de Melo Cc: Peter Zijlstra Cc: Namhyung Kim Cc: Jiri Olsa Cc: Linus Torvalds Cc: Thomas Gleixner Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar

perf intel-pt: Bring instruction decoder files into line with the kernel

2017-11-28T17:28:49Z

There are just a few new defines which do not affect perf tools. Signed-off-by: Adrian Hunter Link: http://lkml.kernel.org/r/1511253326-22308-3-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

perf tools: Robustify detection of clang binary

2017-08-28T19:44:46Z

Prior to this patch, make scripts tested for CLANG with ifeq ($(CC), clang), failing to detect CLANG binaries with different names. Fix it by testing for the existence of __clang__ macro in the list of compiler defined macros. Signed-off-by: David Carrillo-Cisneros Acked-by: Jiri Olsa Cc: Alexander Shishkin Cc: Paul Turner Cc: Stephane Eranian Link: http://lkml.kernel.org/r/20170827075442.108534-5-davidcc@google.com Signed-off-by: Arnaldo Carvalho de Melo

perf intel-pt: Do not use TSC packets for calculating CPU cycles to TSC

2017-06-30T14:50:55Z

CBR (core-to-bus ratio) packets provide an indication of CPU frequency. A more accurate measure can be made by counting the cycles (given by CYC packets) in between other timing packets (either MTC or TSC). Using TSC packets has at least 2 issues: 1) timing might have stopped (e.g. mwait) or 2) TSC packets within PSB+ might slip past CYC packets. For now, simply do not use TSC packets for calculating CPU cycles to TSC. That leaves the case where 2 MTC packets are used, otherwise falling back to the CBR value. Signed-off-by: Adrian Hunter Cc: Andi Kleen Link: http://lkml.kernel.org/r/1495786658-18063-37-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo

x86/insn: perf tools: Add new ptwrite instruction

2017-06-27T14:58:04Z

Add ptwrite to the op code map and the perf tools new instructions test. To run the test: $ tools/perf/perf test "x86 ins" 39: Test x86 instruction decoder - new instructions : Ok Or to see the details: $ tools/perf/perf test -v "x86 ins" 2>&1 | grep ptwrite For information about ptwrite, refer the Intel SDM. Signed-off-by: Adrian Hunter Acked-by: Masami Hiramatsu Link: http://lkml.kernel.org/r/1495180230-19367-1-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo

perf intel-pt: Add decoder support for CBR events

2017-06-21T14:35:51Z

Add decoder support for informing the tools of changes to the core-to-bus ratio (CBR). Signed-off-by: Adrian Hunter Cc: Andi Kleen Link: http://lkml.kernel.org/r/1495786658-18063-16-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo

perf intel-pt: Add reserved byte to CBR packet payload

2017-06-21T14:35:50Z

Future proof CBR packet decoding by passing through also the undefined 'reserved' byte in the packet payload. Signed-off-by: Adrian Hunter Cc: Andi Kleen Link: http://lkml.kernel.org/r/1495786658-18063-15-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo