kernel/tools/perf/util/callchain.h, branch linux-5.2.y

perf symbols: Introduce map_symbol.h

2019-02-06T13:00:38Z

To allow headers just wanting this definition to be able to get it without all the things in symbol.h, to reduce the include dep tree. Cc: Adrian Hunter Cc: Jiri Olsa Cc: Namhyung Kim Link: https://lkml.kernel.org/n/tip-l32z2qyhs6fe8unf4gk2ead2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf callchain: Uninline callchain_cursor_reset() to remove map.h dependency

2019-02-06T13:00:38Z

That was the only thing that made including map.h in callchain.h a requiriment, so uninline it and just add a 'struct map' forward declaration. Cc: Adrian Hunter Cc: Frederic Weisbecker Cc: Jiri Olsa Cc: Namhyung Kim Link: https://lkml.kernel.org/n/tip-7fjz4hvv1bpzqaeriku44fn4@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf callchain: No need to include perf.h

2019-01-25T14:12:09Z

So ditch it. Cc: Adrian Hunter Cc: Jiri Olsa Cc: Namhyung Kim Link: https://lkml.kernel.org/n/tip-bodhwdvcds9ahk26dy4w8m71@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf report: Fix wrong iteration count in --branch-history

2019-01-04T15:54:49Z

By calculating the removed loops, we can get the iteration count. But the iteration count could be reported incorrectly, reporting impossibly high counts. That's because previous code uses the number of removed LBR entries for the iteration count. That's not good. Fix this by increasing the iteration count when a loop is detected. When matching the chain, the iteration count would be added up, finally we need to compute the average value when printing out. For example, $ perf report --branch-history --stdio --no-children Before: ---f2 +0 | |--33.62%--f1 +9 (cycles:1) | f1 +0 | main +22 (cycles:1) | main +17 | main +38 (cycles:1) | main +27 | f1 +26 (cycles:1) | f1 +24 | f2 +27 (cycles:7) | f2 +0 | f1 +19 (cycles:1) | f1 +14 | f2 +27 (cycles:11) | f2 +0 | f1 +9 (cycles:1 iter:2968 avg_cycles:3) | f1 +0 | main +22 (cycles:1 iter:2968 avg_cycles:3) | main +17 | main +38 (cycles:1 iter:2968 avg_cycles:3) 2968 is an impossible high iteration count and avg_cycles is too small. After: ---f2 +0 | |--33.62%--f1 +9 (cycles:1) | f1 +0 | main +22 (cycles:1) | main +17 | main +38 (cycles:1) | main +27 | f1 +26 (cycles:1) | f1 +24 | f2 +27 (cycles:7) | f2 +0 | f1 +19 (cycles:1) | f1 +14 | f2 +27 (cycles:11) | f2 +0 | f1 +9 (cycles:1 iter:1 avg_cycles:23) | f1 +0 | main +22 (cycles:1 iter:1 avg_cycles:23) | main +17 | main +38 (cycles:1 iter:1 avg_cycles:23) avg_cycles:23 is the average cycles of this iteration. Fixes: c4ee06251d42 ("perf report: Calculate the average cycles of iterations") Signed-off-by: Jin Yao Cc: Alexander Shishkin Cc: Andi Kleen Cc: Jiri Olsa Cc: Kan Liang Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1546582230-17507-1-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo

perf unwind: Do not look just at the global callchain_param.record_mode

2018-01-17T13:23:32Z

When setting up DWARF callchains on specific events, without using 'record' or 'trace' --call-graph, but instead doing it like: perf trace -e cycles/call-graph=dwarf/ The unwind__prepare_access() call in thread__insert_map() when we process PERF_RECORD_MMAP(2) metadata events were not being performed, precluding us from using per-event DWARF callchains, handling them just when we asked for all events to be DWARF, using "--call-graph dwarf". We do it in the PERF_RECORD_MMAP because we have to look at one of the executable maps to figure out the executable type (64-bit, 32-bit) of the DSO laid out in that mmap. Also to look at the architecture where the perf.data file was recorded. All this probably should be deferred to when we process a sample for some thread that has callchains, so that we do this processing only for the threads with samples, not for all of them. For now, fix using DWARF on specific events. Before: # perf trace --no-syscalls -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1 PING ::1(::1) 56 data bytes 64 bytes from ::1: icmp_seq=1 ttl=64 time=0.048 ms --- ::1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.048/0.048/0.048/0.000 ms 0.000 probe_libc:inet_pton:(7fe9597bb350)) Problem processing probe_libc:inet_pton callchain, skipping... # After: # perf trace --no-syscalls -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1 PING ::1(::1) 56 data bytes 64 bytes from ::1: icmp_seq=1 ttl=64 time=0.060 ms --- ::1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.060/0.060/0.060/0.000 ms 0.000 probe_libc:inet_pton:(7fd4aa930350)) __inet_pton (inlined) gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so) __GI_getaddrinfo (inlined) [0xffffaa804e51af3f] (/usr/bin/ping) __libc_start_main (/usr/lib64/libc-2.26.so) [0xffffaa804e51b379] (/usr/bin/ping) # # perf trace --call-graph=dwarf --no-syscalls -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1 PING ::1(::1) 56 data bytes 64 bytes from ::1: icmp_seq=1 ttl=64 time=0.057 ms --- ::1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.057/0.057/0.057/0.000 ms 0.000 probe_libc:inet_pton:(7f9363b9e350)) __inet_pton (inlined) gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so) __GI_getaddrinfo (inlined) [0xffffa9e8a14e0f3f] (/usr/bin/ping) __libc_start_main (/usr/lib64/libc-2.26.so) [0xffffa9e8a14e1379] (/usr/bin/ping) # # perf trace --call-graph=fp --no-syscalls -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1 PING ::1(::1) 56 data bytes 64 bytes from ::1: icmp_seq=1 ttl=64 time=0.077 ms --- ::1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.077/0.077/0.077/0.000 ms 0.000 probe_libc:inet_pton:(7f4947e1c350)) __inet_pton (inlined) gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so) __GI_getaddrinfo (inlined) [0xffffaa716d88ef3f] (/usr/bin/ping) __libc_start_main (/usr/lib64/libc-2.26.so) [0xffffaa716d88f379] (/usr/bin/ping) # # perf trace --no-syscalls -e probe_libc:inet_pton/call-graph=fp/ ping -6 -c 1 ::1 PING ::1(::1) 56 data bytes 64 bytes from ::1: icmp_seq=1 ttl=64 time=0.078 ms --- ::1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.078/0.078/0.078/0.000 ms 0.000 probe_libc:inet_pton:(7fa157696350)) __GI___inet_pton (/usr/lib64/libc-2.26.so) getaddrinfo (/usr/lib64/libc-2.26.so) [0xffffa9ba39c74f40] (/usr/bin/ping) # Acked-by: Namhyung Kim Cc: Adrian Hunter Cc: David Ahern Cc: Hendrick Brueckner Cc: Jiri Olsa Cc: Thomas Richter Cc: Wang Nan Link: https://lkml.kernel.org/r/20180116182650.GE16107@kernel.org Signed-off-by: Arnaldo Carvalho de Melo

Merge branch 'linus' into perf/core, to fix conflicts

2017-11-07T09:30:18Z

Conflicts: tools/perf/arch/arm/annotate/instructions.c tools/perf/arch/arm64/annotate/instructions.c tools/perf/arch/powerpc/annotate/instructions.c tools/perf/arch/s390/annotate/instructions.c tools/perf/arch/x86/tests/intel-cqm.c tools/perf/ui/tui/progress.c tools/perf/util/zlib.c Signed-off-by: Ingo Molnar

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

perf callchain: Store srcline in callchain_cursor_node

2017-10-24T12:59:55Z

This is mostly a preparation to enable the creation of full callchain nodes for inline frames. Such frames will reference the IP of the non-inlined frame, but hold the symbol and srcline for an inlined location. As such, we won't be able to query the srcline on-demand based on the IP alone. Instead, we will leverage the functionality provided by this patch here, and store the srcline for the inlined nodes in the new srcline member of callchain_cursor_node. Note that this patch on its own leaks the srcline, as there is no free_callchain_cursor_node or similar. A future patch will add caching of the srcline and handle deletion properly. Signed-off-by: Milian Wolff Reviewed-by: Jiri Olsa Reviewed-by: Namhyung Kim Cc: David Ahern Cc: Peter Zijlstra Cc: Yao Jin Link: http://lkml.kernel.org/r/20171009203310.17362-3-milian.wolff@kdab.com Signed-off-by: Arnaldo Carvalho de Melo

perf report: Calculate the average cycles of iterations

2017-08-30T13:03:27Z

The branch history code has a loop detection function. With this, we can get the number of iterations by calculating the removed loops. While it would be nice for knowing the average cycles of iterations. This patch adds up the cycles in branch entries of removed loops and save the result to the next branch entry (e.g. branch entry A). Finally it will display the iteration number and average cycles at the "from" of branch entry A. For example: perf record -g -j any,save_type ./div perf report --branch-history --no-children --stdio --22.63%--main div.c:42 (RET CROSS_2M) compute_flag div.c:28 (cycles:2 iter:173115 avg_cycles:2) | --10.73%--compute_flag div.c:27 (RET CROSS_2M) rand rand.c:28 (cycles:1) rand rand.c:28 (RET CROSS_2M) __random random.c:298 (cycles:1) __random random.c:297 (COND_BWD CROSS_2M) __random random.c:295 (cycles:1) __random random.c:295 (COND_BWD CROSS_2M) __random random.c:295 (cycles:1) __random random.c:295 (RET CROSS_2M) Signed-off-by: Yao Jin Reviewed-by: Andi Kleen Cc: Alexander Shishkin Cc: Jiri Olsa Cc: Kan Liang Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1502111115-18305-1-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo

perf report: Show branch type in callchain entry

2017-07-19T02:14:42Z

Show branch type in callchain entry. The branch type is printed with other LBR information (such as cycles/abort/...). For example: perf record -g -j any,save_type perf report --branch-history --stdio --no-children 38.50% div.c:45 [.] main div | ---main div.c:42 (RET CROSS_2M cycles:2) compute_flag div.c:28 (cycles:2) compute_flag div.c:27 (RET CROSS_2M cycles:1) rand rand.c:28 (cycles:1) rand rand.c:28 (RET CROSS_2M cycles:1) __random random.c:298 (cycles:1) __random random.c:297 (COND_BWD CROSS_2M cycles:1) __random random.c:295 (cycles:1) __random random.c:295 (COND_BWD CROSS_2M cycles:1) __random random.c:295 (cycles:1) __random random.c:295 (RET CROSS_2M cycles:9) Change log v6: Remove the branch_type_str() since it's moved to branch.c. v5: Rewrite the branch info print code in util/callchain.c. v4: Comparing to previous version, the major changes are: Signed-off-by: Yao Jin Acked-by: Jiri Olsa Cc: Alexander Shishkin Cc: Andi Kleen Cc: Kan Liang Cc: Michael Ellerman Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1500379995-6449-8-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo