kernel/tools/perf/util/annotate.c, branch linux-5.2.y

perf annotate: Fix dereferencing freed memory found by the smatch tool

2019-07-31T05:24:49Z

[ Upstream commit 600c787dbf6521d8d07ee717ab7606d5070103ea ] Based on the following report from Smatch, fix the potential dereferencing freed memory check. tools/perf/util/annotate.c:1125 disasm_line__parse() error: dereferencing freed memory 'namep' tools/perf/util/annotate.c 1100 static int disasm_line__parse(char *line, const char **namep, char **rawp) 1101 { 1102 char tmp, *name = ltrim(line); [...] 1114 *namep = strdup(name); 1115 1116 if (*namep == NULL) 1117 goto out_free_name; [...] 1124 out_free_name: 1125 free((void *)namep); ^^^^^ 1126 *namep = NULL; ^^^^^^ 1127 return -1; 1128 } If strdup() fails to allocate memory space for *namep, we don't need to free memory with pointer 'namep', which is resident in data structure disasm_line::ins::name; and *namep is NULL pointer for this failure, so it's pointless to assign NULL to *namep again. Committer note: Freeing namep, which is the address of the first entry of the 'struct ins' that is the first member of struct disasm_line would in fact free that disasm_line instance, if it was allocated via malloc/calloc, which, later, would a dereference of freed memory. Signed-off-by: Leo Yan Acked-by: Jiri Olsa Cc: Adrian Hunter Cc: Alexander Shishkin Cc: Alexey Budankov Cc: Alexios Zavras Cc: Andi Kleen Cc: Changbin Du Cc: David S. Miller Cc: Davidlohr Bueso Cc: Eric Saint-Etienne Cc: Jin Yao Cc: Konstantin Khlebnikov Cc: Mathieu Poirier Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Rasmus Villemoes Cc: Song Liu Cc: Suzuki Poulouse Cc: Thomas Gleixner Cc: Thomas Richter Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/20190702103420.27540-5-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Sasha Levin

perf report: Fix OOM error in TUI mode on s390

2019-07-26T07:10:24Z

[ Upstream commit 8a07aa4e9b7b0222129c07afff81634a884b2866 ] Debugging a OOM error using the TUI interface revealed this issue on s390: [tmricht@m83lp54 perf]$ cat /proc/kallsyms |sort .... 00000001119b7158 B radix_tree_node_cachep 00000001119b8000 B __bss_stop 00000001119b8000 B _end 000003ff80002850 t autofs_mount [autofs4] 000003ff80002868 t autofs_show_options [autofs4] 000003ff80002a98 t autofs_evict_inode [autofs4] .... There is a huge gap between the last kernel symbol __bss_stop/_end and the first kernel module symbol autofs_mount (from autofs4 module). After reading the kernel symbol table via functions: dso__load() +--> dso__load_kernel_sym() +--> dso__load_kallsyms() +--> __dso_load_kallsyms() +--> symbols__fixup_end() the symbol __bss_stop has a start address of 1119b8000 and an end address of 3ff80002850, as can be seen by this debug statement: symbols__fixup_end __bss_stop start:0x1119b8000 end:0x3ff80002850 The size of symbol __bss_stop is 0x3fe6e64a850 bytes! It is the last kernel symbol and fills up the space until the first kernel module symbol. This size kills the TUI interface when executing the following code: process_sample_event() hist_entry_iter__add() hist_iter__report_callback() hist_entry__inc_addr_samples() symbol__inc_addr_samples(symbol = __bss_stop) symbol__cycles_hist() annotated_source__alloc_histograms(..., symbol__size(sym), ...) This function allocates memory to save sample histograms. The symbol_size() marco is defined as sym->end - sym->start, which results in above value of 0x3fe6e64a850 bytes and the call to calloc() in annotated_source__alloc_histograms() fails. The histgram memory allocation might fail, make this failure no-fatal and continue processing. Output before: [tmricht@m83lp54 perf]$ ./perf --debug stderr=1 report -vvvvv \ -i ~/slow.data 2>/tmp/2 [tmricht@m83lp54 perf]$ tail -5 /tmp/2 __symbol__inc_addr_samples(875): ENOMEM! sym->name=__bss_stop, start=0x1119b8000, addr=0x2aa0005eb08, end=0x3ff80002850, func: 0 problem adding hist entry, skipping event 0x938b8 [0x8]: failed to process type: 68 [Cannot allocate memory] [tmricht@m83lp54 perf]$ Output after: [tmricht@m83lp54 perf]$ ./perf --debug stderr=1 report -vvvvv \ -i ~/slow.data 2>/tmp/2 [tmricht@m83lp54 perf]$ tail -5 /tmp/2 symbol__inc_addr_samples map:0x1597830 start:0x110730000 end:0x3ff80002850 symbol__hists notes->src:0x2aa2a70 nr_hists:1 symbol__inc_addr_samples sym:unlink_anon_vmas src:0x2aa2a70 __symbol__inc_addr_samples: addr=0x11094c69e 0x11094c670 unlink_anon_vmas: period++ [addr: 0x11094c69e, 0x2e, evidx=0] => nr_samples: 1, period: 526008 [tmricht@m83lp54 perf]$ There is no error about failed memory allocation and the TUI interface shows all entries. Signed-off-by: Thomas Richter Reviewed-by: Hendrik Brueckner Cc: Heiko Carstens Cc: Hendrik Brueckner Link: http://lkml.kernel.org/r/90cb5607-3e12-5167-682d-978eba7dafa8@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Sasha Levin

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 251

2019-06-05T15:30:26Z

Based on 1 normalized pattern(s): released under the gpl v2 and only v2 not any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 12 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Steve Winslow Reviewed-by: Alexios Zavras Reviewed-by: Kate Stewart Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141332.526460839@linutronix.de Signed-off-by: Greg Kroah-Hartman

perf annotate: Remove hist__account_cycles() from callback

2019-05-15T19:36:46Z

The hist__account_cycles() function is executed when the hist_iter__branch_callback() is called. But it looks it's not necessary. In hist__account_cycles, it already walks on all branch entries. This patch moves the hist__account_cycles out of callback, now the data processing is much faster than before. Previous code has an issue that the ch[offset].num++ (in __symbol__account_cycles) is executed repeatedly since hist__account_cycles is called in each hist_iter__branch_callback, so the counting of ch[offset].num is not correct (too big). With this patch, the issue is fixed. And we don't need the code of "ch->reset >= ch->num / 2" to check if there are too many overlaps (in annotation__count_and_fill), otherwise some data would be hidden. Now, we can try, for example: perf record -b ... perf annotate or perf report -s symbol The before/after output should be no change. v3: --- Fix the crash in stdio mode. Like previous code, it needs the checking of ui__has_annotation() before hist__account_cycles() v2: --- 1. Cover the similar perf report 2. Remove the checking code "ch->reset >= ch->num / 2" Signed-off-by: Jin Yao Tested-by: Arnaldo Carvalho de Melo Cc: Alexander Shishkin Cc: Andi Kleen Cc: Jin Yao Cc: Jiri Olsa Cc: Kan Liang Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1552684577-29041-1-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo

perf annotate: Fix build on 32 bit for BPF annotation

2019-05-02T20:00:19Z

Commit 6987561c9e86 ("perf annotate: Enable annotation of BPF programs") adds support for BPF programs annotations but the new code does not build on 32-bit. Signed-off-by: Thadeu Lima de Souza Cascardo Acked-by: Song Liu Fixes: 6987561c9e86 ("perf annotate: Enable annotation of BPF programs") Link: http://lkml.kernel.org/r/20190403194452.10845-1-cascardo@canonical.com Signed-off-by: Arnaldo Carvalho de Melo

perf annotate: Enable annotation of BPF programs

2019-03-20T19:43:15Z

In symbol__disassemble(), DSO_BINARY_TYPE__BPF_PROG_INFO dso calls into a new function symbol__disassemble_bpf(), where annotation line information is filled based on the bpf_prog_info and btf data saved in given perf_env. symbol__disassemble_bpf() uses binutils's libopcodes to disassemble bpf programs. Committer testing: After fixing this: - u64 *addrs = (u64 *)(info_linear->info.jited_ksyms); + u64 *addrs = (u64 *)(uintptr_t)(info_linear->info.jited_ksyms); Detected when crossbuilding to a 32-bit arch. And making all this dependent on HAVE_LIBBFD_SUPPORT and HAVE_LIBBPF_SUPPORT: 1) Have a BPF program running, one that has BTF info, etc, I used the tools/perf/examples/bpf/augmented_raw_syscalls.c put in place by 'perf trace'. # grep -B1 augmented_raw ~/.perfconfig [trace] add_events = /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.c # # perf trace -e *mmsg dnf/6245 sendmmsg(20, 0x7f5485a88030, 2, MSG_NOSIGNAL) = 2 NetworkManager/10055 sendmmsg(22, 0x7f8126ad1bb0, 2, MSG_NOSIGNAL) = 2 2) Then do a 'perf record' system wide for a while: # perf record -a ^C[ perf record: Woken up 68 times to write data ] [ perf record: Captured and wrote 19.427 MB perf.data (366891 samples) ] # 3) Check that we captured BPF and BTF info in the perf.data file: # perf report --header-only | grep 'b[pt]f' # event : name = cycles:ppp, , id = { 294789, 294790, 294791, 294792, 294793, 294794, 294795, 294796 }, size = 112, { sample_period, sample_freq } = 4000, sample_type = IP|TID|TIME|CPU|PERIOD, read_format = ID, disabled = 1, inherit = 1, mmap = 1, comm = 1, freq = 1, task = 1, precise_ip = 3, sample_id_all = 1, exclude_guest = 1, mmap2 = 1, comm_exec = 1, ksymbol = 1, bpf_event = 1 # bpf_prog_info of id 13 # bpf_prog_info of id 14 # bpf_prog_info of id 15 # bpf_prog_info of id 16 # bpf_prog_info of id 17 # bpf_prog_info of id 18 # bpf_prog_info of id 21 # bpf_prog_info of id 22 # bpf_prog_info of id 41 # bpf_prog_info of id 42 # btf info of id 2 # 4) Check which programs got recorded: # perf report | grep bpf_prog | head 0.16% exe bpf_prog_819967866022f1e1_sys_enter [k] bpf_prog_819967866022f1e1_sys_enter 0.14% exe bpf_prog_c1bd85c092d6e4aa_sys_exit [k] bpf_prog_c1bd85c092d6e4aa_sys_exit 0.08% fuse-overlayfs bpf_prog_819967866022f1e1_sys_enter [k] bpf_prog_819967866022f1e1_sys_enter 0.07% fuse-overlayfs bpf_prog_c1bd85c092d6e4aa_sys_exit [k] bpf_prog_c1bd85c092d6e4aa_sys_exit 0.01% clang-4.0 bpf_prog_c1bd85c092d6e4aa_sys_exit [k] bpf_prog_c1bd85c092d6e4aa_sys_exit 0.01% clang-4.0 bpf_prog_819967866022f1e1_sys_enter [k] bpf_prog_819967866022f1e1_sys_enter 0.00% clang bpf_prog_c1bd85c092d6e4aa_sys_exit [k] bpf_prog_c1bd85c092d6e4aa_sys_exit 0.00% runc bpf_prog_819967866022f1e1_sys_enter [k] bpf_prog_819967866022f1e1_sys_enter 0.00% clang bpf_prog_819967866022f1e1_sys_enter [k] bpf_prog_819967866022f1e1_sys_enter 0.00% sh bpf_prog_c1bd85c092d6e4aa_sys_exit [k] bpf_prog_c1bd85c092d6e4aa_sys_exit # This was with the default --sort order for 'perf report', which is: --sort comm,dso,symbol If we just look for the symbol, for instance: # perf report --sort symbol | grep bpf_prog | head 0.26% [k] bpf_prog_819967866022f1e1_sys_enter - - 0.24% [k] bpf_prog_c1bd85c092d6e4aa_sys_exit - - # or the DSO: # perf report --sort dso | grep bpf_prog | head 0.26% bpf_prog_819967866022f1e1_sys_enter 0.24% bpf_prog_c1bd85c092d6e4aa_sys_exit # We'll see the two BPF programs that augmented_raw_syscalls.o puts in place, one attached to the raw_syscalls:sys_enter and another to the raw_syscalls:sys_exit tracepoints, as expected. Now we can finally do, from the command line, annotation for one of those two symbols, with the original BPF program source coude intermixed with the disassembled JITed code: # perf annotate --stdio2 bpf_prog_819967866022f1e1_sys_enter Samples: 950 of event 'cycles:ppp', 4000 Hz, Event count (approx.): 553756947, [percent: local period] bpf_prog_819967866022f1e1_sys_enter() bpf_prog_819967866022f1e1_sys_enter Percent int sys_enter(struct syscall_enter_args *args) 53.41 push %rbp 0.63 mov %rsp,%rbp 0.31 sub $0x170,%rsp 1.93 sub $0x28,%rbp 7.02 mov %rbx,0x0(%rbp) 3.20 mov %r13,0x8(%rbp) 1.07 mov %r14,0x10(%rbp) 0.61 mov %r15,0x18(%rbp) 0.11 xor %eax,%eax 1.29 mov %rax,0x20(%rbp) 0.11 mov %rdi,%rbx return bpf_get_current_pid_tgid(); 2.02 → callq *ffffffffda6776d9 2.76 mov %eax,-0x148(%rbp) mov %rbp,%rsi int sys_enter(struct syscall_enter_args *args) add $0xfffffffffffffeb8,%rsi return bpf_map_lookup_elem(pids, &pid) != NULL; movabs $0xffff975ac2607800,%rdi 1.26 → callq *ffffffffda6789e9 cmp $0x0,%rax 2.43 → je 0 add $0x38,%rax 0.21 xor %r13d,%r13d if (pid_filter__has(&pids_filtered, getpid())) 0.81 cmp $0x0,%rax → jne 0 mov %rbp,%rdi probe_read(&augmented_args.args, sizeof(augmented_args.args), args); 2.22 add $0xfffffffffffffeb8,%rdi 0.11 mov $0x40,%esi 0.32 mov %rbx,%rdx 2.74 → callq *ffffffffda658409 syscall = bpf_map_lookup_elem(&syscalls, &augmented_args.args.syscall_nr); 0.22 mov %rbp,%rsi 1.69 add $0xfffffffffffffec0,%rsi syscall = bpf_map_lookup_elem(&syscalls, &augmented_args.args.syscall_nr); movabs $0xffff975bfcd36000,%rdi add $0xd0,%rdi 0.21 mov 0x0(%rsi),%eax 0.93 cmp $0x200,%rax → jae 0 0.10 shl $0x3,%rax 0.11 add %rdi,%rax 0.11 → jmp 0 xor %eax,%eax if (syscall == NULL || !syscall->enabled) 1.07 cmp $0x0,%rax → je 0 if (syscall == NULL || !syscall->enabled) 6.57 movzbq 0x0(%rax),%rdi if (syscall == NULL || !syscall->enabled) cmp $0x0,%rdi 0.95 → je 0 mov $0x40,%r8d switch (augmented_args.args.syscall_nr) { mov -0x140(%rbp),%rdi switch (augmented_args.args.syscall_nr) { cmp $0x2,%rdi → je 0 cmp $0x101,%rdi → je 0 cmp $0x15,%rdi → jne 0 case SYS_OPEN: filename_arg = (const void *)args->args[0]; mov 0x10(%rbx),%rdx → jmp 0 case SYS_OPENAT: filename_arg = (const void *)args->args[1]; mov 0x18(%rbx),%rdx if (filename_arg != NULL) { cmp $0x0,%rdx → je 0 xor %edi,%edi augmented_args.filename.reserved = 0; mov %edi,-0x104(%rbp) augmented_args.filename.size = probe_read_str(&augmented_args.filename.value, mov %rbp,%rdi add $0xffffffffffffff00,%rdi augmented_args.filename.size = probe_read_str(&augmented_args.filename.value, mov $0x100,%esi → callq *ffffffffda658499 mov $0x148,%r8d augmented_args.filename.size = probe_read_str(&augmented_args.filename.value, mov %eax,-0x108(%rbp) augmented_args.filename.size = probe_read_str(&augmented_args.filename.value, mov %rax,%rdi shl $0x20,%rdi shr $0x20,%rdi if (augmented_args.filename.size < sizeof(augmented_args.filename.value)) { cmp $0xff,%rdi → ja 0 len -= sizeof(augmented_args.filename.value) - augmented_args.filename.size; add $0x48,%rax len &= sizeof(augmented_args.filename.value) - 1; and $0xff,%rax mov %rax,%r8 mov %rbp,%rcx return perf_event_output(args, &__augmented_syscalls__, BPF_F_CURRENT_CPU, &augmented_args, len); add $0xfffffffffffffeb8,%rcx mov %rbx,%rdi movabs $0xffff975fbd72d800,%rsi mov $0xffffffff,%edx → callq *ffffffffda658ad9 mov %rax,%r13 } mov %r13,%rax 0.72 mov 0x0(%rbp),%rbx mov 0x8(%rbp),%r13 1.16 mov 0x10(%rbp),%r14 0.10 mov 0x18(%rbp),%r15 0.42 add $0x28,%rbp 0.54 leaveq 0.54 ← retq # Please see 'man perf-config' to see how to control what should be seen, via ~/.perfconfig [annotate] section, for instance, one can suppress the source code and see just the disassembly, etc. Alternatively, use the TUI bu just using 'perf annotate', press '/bpf_prog' to see the bpf symbols, press enter and do the interactive annotation, which allows for dumping to a file after selecting the the various output tunables, for instance, the above without source code intermixed, plus showing all the instruction offsets: # perf annotate bpf_prog_819967866022f1e1_sys_enter Then press: 's' to hide the source code + 'O' twice to show all instruction offsets, then 'P' to print to the bpf_prog_819967866022f1e1_sys_enter.annotation file, which will have: # cat bpf_prog_819967866022f1e1_sys_enter.annotation bpf_prog_819967866022f1e1_sys_enter() bpf_prog_819967866022f1e1_sys_enter Event: cycles:ppp 53.41 0: push %rbp 0.63 1: mov %rsp,%rbp 0.31 4: sub $0x170,%rsp 1.93 b: sub $0x28,%rbp 7.02 f: mov %rbx,0x0(%rbp) 3.20 13: mov %r13,0x8(%rbp) 1.07 17: mov %r14,0x10(%rbp) 0.61 1b: mov %r15,0x18(%rbp) 0.11 1f: xor %eax,%eax 1.29 21: mov %rax,0x20(%rbp) 0.11 25: mov %rdi,%rbx 2.02 28: → callq *ffffffffda6776d9 2.76 2d: mov %eax,-0x148(%rbp) 33: mov %rbp,%rsi 36: add $0xfffffffffffffeb8,%rsi 3d: movabs $0xffff975ac2607800,%rdi 1.26 47: → callq *ffffffffda6789e9 4c: cmp $0x0,%rax 2.43 50: → je 0 52: add $0x38,%rax 0.21 56: xor %r13d,%r13d 0.81 59: cmp $0x0,%rax 5d: → jne 0 63: mov %rbp,%rdi 2.22 66: add $0xfffffffffffffeb8,%rdi 0.11 6d: mov $0x40,%esi 0.32 72: mov %rbx,%rdx 2.74 75: → callq *ffffffffda658409 0.22 7a: mov %rbp,%rsi 1.69 7d: add $0xfffffffffffffec0,%rsi 84: movabs $0xffff975bfcd36000,%rdi 8e: add $0xd0,%rdi 0.21 95: mov 0x0(%rsi),%eax 0.93 98: cmp $0x200,%rax 9f: → jae 0 0.10 a1: shl $0x3,%rax 0.11 a5: add %rdi,%rax 0.11 a8: → jmp 0 aa: xor %eax,%eax 1.07 ac: cmp $0x0,%rax b0: → je 0 6.57 b6: movzbq 0x0(%rax),%rdi bb: cmp $0x0,%rdi 0.95 bf: → je 0 c5: mov $0x40,%r8d cb: mov -0x140(%rbp),%rdi d2: cmp $0x2,%rdi d6: → je 0 d8: cmp $0x101,%rdi df: → je 0 e1: cmp $0x15,%rdi e5: → jne 0 e7: mov 0x10(%rbx),%rdx eb: → jmp 0 ed: mov 0x18(%rbx),%rdx f1: cmp $0x0,%rdx f5: → je 0 f7: xor %edi,%edi f9: mov %edi,-0x104(%rbp) ff: mov %rbp,%rdi 102: add $0xffffffffffffff00,%rdi 109: mov $0x100,%esi 10e: → callq *ffffffffda658499 113: mov $0x148,%r8d 119: mov %eax,-0x108(%rbp) 11f: mov %rax,%rdi 122: shl $0x20,%rdi 126: shr $0x20,%rdi 12a: cmp $0xff,%rdi 131: → ja 0 133: add $0x48,%rax 137: and $0xff,%rax 13d: mov %rax,%r8 140: mov %rbp,%rcx 143: add $0xfffffffffffffeb8,%rcx 14a: mov %rbx,%rdi 14d: movabs $0xffff975fbd72d800,%rsi 157: mov $0xffffffff,%edx 15c: → callq *ffffffffda658ad9 161: mov %rax,%r13 164: mov %r13,%rax 0.72 167: mov 0x0(%rbp),%rbx 16b: mov 0x8(%rbp),%r13 1.16 16f: mov 0x10(%rbp),%r14 0.10 173: mov 0x18(%rbp),%r15 0.42 177: add $0x28,%rbp 0.54 17b: leaveq 0.54 17c: ← retq Another cool way to test all this is to symple use 'perf top' look for those symbols, go there and press enter, annotate it live :-) Signed-off-by: Song Liu Reviewed-by: Jiri Olsa Tested-by: Arnaldo Carvalho de Melo Cc: Alexei Starovoitov Cc: Daniel Borkmann Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Stanislav Fomichev Link: http://lkml.kernel.org/r/20190312053051.2690567-13-songliubraving@fb.com Signed-off-by: Arnaldo Carvalho de Melo

perf annotate: Calculate the max instruction name, align column to that

2019-03-06T19:40:15Z

We were hardcoding '6' as the max instruction name, and we have lots that are longer than that, see the diff from two 'P' printed TUI annotations for a libc function that uses instructions with long names, such as 'vpmovmskb' with its 9 chars: --- __strcmp_avx2.annotation.before 2019-03-06 16:31:39.368020425 -0300 +++ __strcmp_avx2.annotation 2019-03-06 16:32:12.079450508 -0300 @@ -2,284 +2,284 @@ Event: cycles:ppp Percent endbr64 - 0.10 mov %edi,%eax + 0.10 mov %edi,%eax - xor %edx,%edx + xor %edx,%edx - 3.54 vpxor %ymm7,%ymm7,%ymm7 + 3.54 vpxor %ymm7,%ymm7,%ymm7 - or %esi,%eax + or %esi,%eax - and $0xfff,%eax + and $0xfff,%eax - cmp $0xf80,%eax + cmp $0xf80,%eax - ↓ jg 370 + ↓ jg 370 - 27.07 vmovdqu (%rdi),%ymm1 + 27.07 vmovdqu (%rdi),%ymm1 - 7.97 vpcmpeqb (%rsi),%ymm1,%ymm0 + 7.97 vpcmpeqb (%rsi),%ymm1,%ymm0 - 2.15 vpminub %ymm1,%ymm0,%ymm0 + 2.15 vpminub %ymm1,%ymm0,%ymm0 - 4.09 vpcmpeqb %ymm7,%ymm0,%ymm0 + 4.09 vpcmpeqb %ymm7,%ymm0,%ymm0 - 0.43 vpmovmskb %ymm0,%ecx + 0.43 vpmovmskb %ymm0,%ecx - 1.53 test %ecx,%ecx + 1.53 test %ecx,%ecx - ↓ je b0 + ↓ je b0 - 5.26 tzcnt %ecx,%edx + 5.26 tzcnt %ecx,%edx - 18.40 movzbl (%rdi,%rdx,1),%eax + 18.40 movzbl (%rdi,%rdx,1),%eax - 7.09 movzbl (%rsi,%rdx,1),%edx + 7.09 movzbl (%rsi,%rdx,1),%edx - 3.34 sub %edx,%eax + 3.34 sub %edx,%eax 2.37 vzeroupper ← retq nop - 50: tzcnt %ecx,%edx + 50: tzcnt %ecx,%edx - movzbl 0x20(%rdi,%rdx,1),%eax + movzbl 0x20(%rdi,%rdx,1),%eax - movzbl 0x20(%rsi,%rdx,1),%edx + movzbl 0x20(%rsi,%rdx,1),%edx - sub %edx,%eax + sub %edx,%eax vzeroupper ← retq - data16 nopw %cs:0x0(%rax,%rax,1) + data16 nopw %cs:0x0(%rax,%rax,1) Reported-by: Travis Downs LPU-Reference: CAOBGo4z1KfmWeOm6Et0cnX5Z6DWsG2PQbAvRn1MhVPJmXHrc5g@mail.gmail.com Cc: Adrian Hunter Cc: Jiri Olsa Cc: Namhyung Kim Link: https://lkml.kernel.org/n/tip-89wsdd9h9g6bvq52sgp6d0u4@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf annotate: Fix getting source line failure

2019-02-21T20:00:35Z

The output of "perf annotate -l --stdio xxx" changed since commit 425859ff0de33 ("perf annotate: No need to calculate notes->start twice") removed notes->start assignment in symbol__calc_lines(). It will get failed in find_address_in_section() from symbol__tty_annotate() subroutine as the a2l->addr is wrong. So the annotate summary doesn't report the line number of source code correctly. Before fix: liwei@euler:~/main_code/hulk_work/hulk/tools/perf$ cat common_while_1.c void hotspot_1(void) { volatile int i; for (i = 0; i < 0x10000000; i++); for (i = 0; i < 0x10000000; i++); for (i = 0; i < 0x10000000; i++); } int main(void) { hotspot_1(); return 0; } liwei@euler:~/main_code/hulk_work/hulk/tools/perf$ gcc common_while_1.c -g -o common_while_1 liwei@euler:~/main_code/hulk_work/hulk/tools/perf$ sudo ./perf record ./common_while_1 [ perf record: Woken up 2 times to write data ] [ perf record: Captured and wrote 0.488 MB perf.data (12498 samples) ] liwei@euler:~/main_code/hulk_work/hulk/tools/perf$ sudo ./perf annotate -l -s hotspot_1 --stdio Sorted summary for file /home/liwei/main_code/hulk_work/hulk/tools/perf/common_while_1 ---------------------------------------------- 19.30 common_while_1[32] 19.03 common_while_1[4e] 19.01 common_while_1[16] 5.04 common_while_1[13] 4.99 common_while_1[4b] 4.78 common_while_1[2c] 4.77 common_while_1[10] 4.66 common_while_1[2f] 4.59 common_while_1[51] 4.59 common_while_1[35] 4.52 common_while_1[19] 4.20 common_while_1[56] 0.51 common_while_1[48] Percent | Source code & Disassembly of common_while_1 for cycles:ppp (12480 samples, percent: local period) ----------------------------------------------------------------------------------------------------------------- : : : : Disassembly of section .text: : : 00000000000005fa : : hotspot_1(): : void hotspot_1(void) : { 0.00 : 5fa: push %rbp 0.00 : 5fb: mov %rsp,%rbp : volatile int i; : : for (i = 0; i < 0x10000000; i++); 0.00 : 5fe: movl $0x0,-0x4(%rbp) 0.00 : 605: jmp 610 0.00 : 607: mov -0x4(%rbp),%eax common_while_1[10] 4.77 : 60a: add $0x1,%eax common_while_1[13] 5.04 : 60d: mov %eax,-0x4(%rbp) common_while_1[16] 19.01 : 610: mov -0x4(%rbp),%eax common_while_1[19] 4.52 : 613: cmp $0xfffffff,%eax 0.00 : 618: jle 607 : for (i = 0; i < 0x10000000; i++); ... After fix: liwei@euler:~/main_code/hulk_work/hulk/tools/perf$ sudo ./perf record ./common_while_1 [ perf record: Woken up 2 times to write data ] [ perf record: Captured and wrote 0.488 MB perf.data (12500 samples) ] liwei@euler:~/main_code/hulk_work/hulk/tools/perf$ sudo ./perf annotate -l -s hotspot_1 --stdio Sorted summary for file /home/liwei/main_code/hulk_work/hulk/tools/perf/common_while_1 ---------------------------------------------- 33.34 common_while_1.c:5 33.34 common_while_1.c:6 33.32 common_while_1.c:7 Percent | Source code & Disassembly of common_while_1 for cycles:ppp (12482 samples, percent: local period) ----------------------------------------------------------------------------------------------------------------- : : : : Disassembly of section .text: : : 00000000000005fa : : hotspot_1(): : void hotspot_1(void) : { 0.00 : 5fa: push %rbp 0.00 : 5fb: mov %rsp,%rbp : volatile int i; : : for (i = 0; i < 0x10000000; i++); 0.00 : 5fe: movl $0x0,-0x4(%rbp) 0.00 : 605: jmp 610 0.00 : 607: mov -0x4(%rbp),%eax common_while_1.c:5 4.70 : 60a: add $0x1,%eax 4.89 : 60d: mov %eax,-0x4(%rbp) common_while_1.c:5 19.03 : 610: mov -0x4(%rbp),%eax common_while_1.c:5 4.72 : 613: cmp $0xfffffff,%eax 0.00 : 618: jle 607 : for (i = 0; i < 0x10000000; i++); 0.00 : 61a: movl $0x0,-0x4(%rbp) 0.00 : 621: jmp 62c 0.00 : 623: mov -0x4(%rbp),%eax common_while_1.c:6 4.54 : 626: add $0x1,%eax 4.73 : 629: mov %eax,-0x4(%rbp) common_while_1.c:6 19.54 : 62c: mov -0x4(%rbp),%eax common_while_1.c:6 4.54 : 62f: cmp $0xfffffff,%eax ... Signed-off-by: Wei Li Acked-by: Jiri Olsa Tested-by: Arnaldo Carvalho de Melo Cc: Alexander Shishkin Cc: Jin Yao Cc: Namhyung Kim Cc: Peter Zijlstra Fixes: 425859ff0de33 ("perf annotate: No need to calculate notes->start twice") Link: http://lkml.kernel.org/r/20190221095716.39529-1-liwei391@huawei.com Signed-off-by: Arnaldo Carvalho de Melo

pref tools: Add missing map.h includes

2019-02-06T13:00:38Z

Lots of places get the map.h file indirectly, and since we're going to remove it from machine.h, then those need to include it directly, do it now, before we remove that dep. Cc: Adrian Hunter Cc: Jiri Olsa Cc: Namhyung Kim Link: https://lkml.kernel.org/n/tip-ob8jehdjda8h5jsrv9dqj9tf@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf symbols: Remove some unnecessary includes from symbol.h

2019-01-25T14:12:09Z

And fixup the fallout in places like annotation and jitdump that were using things like dirname() but weren't including libgen.h, etc. Cc: Adrian Hunter Cc: Jiri Olsa Cc: Namhyung Kim Link: https://lkml.kernel.org/n/tip-wrii9hy1a1wathc0398f9fgt@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo