kernel/tools/perf/ui/browser.c, branch linux-4.17.y

perf ui browser: Fixup cleaning unused lines at the bottom

2018-04-05T14:51:28Z

Now that we can have extra title lines we should use ui_browser->rows and not ->height when drawing lines, as well as adding ui_browser->extra_title_lines to browser->y when cleaning unused lines at the bottom, otherwise we end up clobbering with spaces the last line just shown by ui_browser->refresh() routine. Cc: Adrian Hunter Cc: Andi Kleen Cc: David Ahern Cc: Jin Yao Cc: Jiri Olsa Cc: Namhyung Kim Cc: Wang Nan Fixes: ef9ff6017e3c ("perf ui browser: Move the extra title lines from the hists browser") Link: https://lkml.kernel.org/n/tip-dfcpokt1pm5ixm8n9pxwtstz@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf ui browser: Move the extra title lines from the hists browser

2018-04-03T13:24:26Z

This will be useful for the annotate browser as well, that wants to have extra title lines, i.e. the current ui_browser unconditionally reserves the first line for a browser title and the last one for status messages. But some browsers, like the buckets one (hists browser) needs extra lines to show headers, allowing it to be shown or not, press 'H' in 'perf top' or 'perf report' to see this feature. So move that logic to the core ui_browser used by the hists_browser ('perf top' and 'perf report' main interface) so that it can be used by the annotate browser too. Cc: Adrian Hunter Cc: David Ahern Cc: Jiri Olsa Cc: Martin Liška Cc: Namhyung Kim Cc: Wang Nan Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196935 Link: https://lkml.kernel.org/n/tip-r38xm3ut37ulbg1o5tn5iise@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf annotate: Move the default annotate options to the library

2018-03-21T15:53:40Z

One more thing that goes from the TUI code to be used more widely, for instance it'll affect the default options used by: perf annotate --stdio2 Cc: Adrian Hunter Cc: Andi Kleen Cc: David Ahern Cc: Jin Yao Cc: Jiri Olsa Cc: Namhyung Kim Cc: Wang Nan Link: https://lkml.kernel.org/n/tip-0nsz0dm0akdbo30vgja2a10e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf ui browser: Add vprintf() method

2018-03-20T16:19:30Z

We'll need it for some callbacks for the upcoming annotation__line_print() routines. Cc: Adrian Hunter Cc: Andi Kleen Cc: David Ahern Cc: Jin Yao Cc: Jiri Olsa Cc: Namhyung Kim Cc: Wang Nan Link: https://lkml.kernel.org/n/tip-t3qiobj4ua38xzsq8cyw9ky5@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

tools include: Adopt strstarts() from the kernel

2017-07-20T18:46:10Z

Replacing prefixcmp(), same purpose, inverted result, so standardize on the kernel variant, to reduce silly differences among tools/ and the kernel sources, making it easier for people to work in both codebases. And then doing: if (strstarts(option, "no-")) Looks clearer than doing: if (!prefixcmp(option, "no-")) To figure out if option starts witn "no-". Cc: Adrian Hunter Cc: David Ahern Cc: Jiri Olsa Cc: Josh Poimboeuf Cc: Namhyung Kim Cc: Rusty Russell Cc: Wang Nan Link: http://lkml.kernel.org/n/tip-kaei42gi7lpa8subwtv7eug8@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf annotate: Implement visual marker for macro fusion

2017-07-19T02:13:49Z

For marking fused instructions clearly this patch adds a line before the first instruction of pair and joins it with the arrow of the jump to its target. For example, when "je" is selected in annotate view, the line before cmpl is displayed and joins the arrow of "je". │ ┌──cmpl $0x0,argp_program_version_hook 81.93 │ ├──je 20 │ │ lock cmpxchg %esi,0x38a9a4(%rip) │ │↓ jne 29 │ │↓ jmp 43 11.47 │20:└─→cmpxch %esi,0x38a999(%rip) That means the cmpl+je is a fused instruction pair and they should be considered together. Changelog: v3: Use Arnaldo's fix to improve the arrow origin rendering. To get the evsel->evlist->env->cpuid, save the evsel in annotate_browser. v2: new function "ins__is_fused" to check if the instructions are fused. Signed-off-by: Yao Jin Tested-by: Arnaldo Carvalho de Melo Cc: Alexander Shishkin Cc: Andi Kleen Cc: Jiri Olsa Cc: Kan Liang Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1499403995-19857-3-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo

perf annotate: Fix broken arrow at row 0 connecting jmp instruction to its target

2017-07-10T19:36:40Z

When the jump instruction is displayed at the row 0 in annotate view, the arrow is broken. An example: 16.86 │ ┌──je 82 0.01 │ movsd (%rsp),%xmm0 │ movsd 0x8(%rsp),%xmm4 │ movsd 0x8(%rsp),%xmm1 │ movsd (%rsp),%xmm3 │ divsd %xmm4,%xmm0 │ divsd %xmm3,%xmm1 │ movsd (%rsp),%xmm2 │ addsd %xmm1,%xmm0 │ addsd %xmm2,%xmm0 │ movsd %xmm0,(%rsp) │82: sub $0x1,%ebx 83.03 │ ↑ jne 38 │ add $0x10,%rsp │ xor %eax,%eax │ pop %rbx │ ← retq The patch increments the row number before checking with 0. Signed-off-by: Yao Jin Tested-by: Arnaldo Carvalho de Melo Cc: Alexander Shishkin Cc: Andi Kleen Cc: Jiri Olsa Cc: Kan Liang Cc: Peter Zijlstra Cc: stable@vger.kernel.org Fixes: 944e1abed9e1 ("perf ui browser: Add method to draw up/down arrow line") Link: http://lkml.kernel.org/r/1496901704-30275-1-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo

perf tools: Move extra string util functions to util/string2.h

2017-04-19T16:01:51Z

Moving them from util.h, where they don't belong. Since libc already have string.h, name it slightly differently, as string2.h. Cc: Adrian Hunter Cc: David Ahern Cc: Jiri Olsa Cc: Namhyung Kim Cc: Wang Nan Link: http://lkml.kernel.org/n/tip-eh3vz5sqxsrdd8lodoro4jrw@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf tools: Move sane ctype stuff from util.h to sane_ctype.h

2017-04-19T16:01:48Z

More stuff that came from git, out of the hodge-podge that is util.h Cc: Adrian Hunter Cc: David Ahern Cc: Jiri Olsa Cc: Namhyung Kim Cc: Wang Nan Link: http://lkml.kernel.org/n/tip-e3lana4gctz3ub4hn4y29hkw@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo