kernel/tools/perf/builtin-list.c, branch linux-4.17.y

Merge branch 'linus' into perf/core, to fix conflicts

2017-11-07T09:30:18Z

Conflicts: tools/perf/arch/arm/annotate/instructions.c tools/perf/arch/arm64/annotate/instructions.c tools/perf/arch/powerpc/annotate/instructions.c tools/perf/arch/s390/annotate/instructions.c tools/perf/arch/x86/tests/intel-cqm.c tools/perf/ui/tui/progress.c tools/perf/util/zlib.c Signed-off-by: Ingo Molnar

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

perf list: Add metric groups to perf list

2017-09-13T12:49:13Z

Add code to perf list to print metric groups, and metrics that don't have an event name. The metricgroup code collects the eventgroups and events into a rblist, and then prints them according to the configured filters. The metricgroups are printed by default, but can be limited by perf list metric or perf list metricgroup % perf list metricgroup .. Metric Groups: DSB: DSB_Coverage [Fraction of Uops delivered by the DSB (aka Decoded Icache; or Uop Cache)] FLOPS: GFLOPs [Giga Floating Point Operations Per Second] Frontend: IFetch_Line_Utilization [Rough Estimation of fraction of fetched lines bytes that were likely consumed by program instructions] Frontend_Bandwidth: DSB_Coverage [Fraction of Uops delivered by the DSB (aka Decoded Icache; or Uop Cache)] Memory_BW: MLP [Memory-Level-Parallelism (average number of L1 miss demand load when there is at least 1 such miss)] v2: Check return value of asprintf to fix warning on FC26 Fix key in lookup/addition for the groups list Signed-off-by: Andi Kleen Acked-by: Jiri Olsa Link: http://lkml.kernel.org/r/20170831194036.30146-8-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo

perf tools: Remove unused 'prefix' from builtin functions

2017-03-27T14:58:09Z

We got it from the git sources but never used it for anything, with the place where this would be somehow used remaining: static int run_builtin(struct cmd_struct *p, int argc, const char **argv) { prefix = NULL; if (p->option & RUN_SETUP) prefix = NULL; /* setup_perf_directory(); */ Ditch it. Cc: Adrian Hunter Cc: David Ahern Cc: Jiri Olsa Cc: Namhyung Kim Cc: Wang Nan Link: http://lkml.kernel.org/n/tip-uw5swz05vol0qpr32c5lpvus@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf list: Move extra details printing to new option

2017-03-23T14:42:31Z

Move the printing of perf expressions and internal events to a new clearer --details flag, instead of lumping it together with other debug options in --debug. This makes it clearer to use. Before perf list --debug ... unc_m_power_critical_throttle_cycles [Cycles all ranks are in critical thermal throttle. Unit: uncore_imc] uncore_imc_2/event=0x86/ MetricName: power_critical_throttle_cycles % MetricExpr: (unc_m_power_critical_throttle_cycles / unc_m_clockticks) * 100. after perf list --details ... unc_m_power_critical_throttle_cycles [Cycles all ranks are in critical thermal throttle. Unit: uncore_imc] uncore_imc_2/event=0x86/ MetricName: power_critical_throttle_cycles % MetricExpr: (unc_m_power_critical_throttle_cycles / unc_m_clockticks) * 100. Signed-off-by: Andi Kleen Acked-by: Jiri Olsa Tested-by: Arnaldo Carvalho de Melo Link: http://lkml.kernel.org/r/20170320201711.14142-14-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo

perf list: Add debug support for outputing alias string

2017-02-08T11:55:04Z

For debugging and testing it is useful to see the converted alias string. Add support to perf stat/record and perf list to print the alias conversion. The text string is saved in the alias structure. For perf stat/record it is folded into the normal -v. For perf list -v was taken, so we use --debug. Before: % perf list ... cache: l1d.replacement [L1D data line replacements] l1d_pend_miss.fb_full [Cycles a demand request was blocked due to Fill Buffers inavailability] After % perf list --debug ... cache: l1d.replacement [L1D data line replacements] cpu/umask=0x1,period=2000003,event=0x51/ l1d_pend_miss.fb_full [Cycles a demand request was blocked due to Fill Buffers inavailability] cpu/umask=0x2,period=2000003,cmask=1,event=0x48/ Signed-off-by: Andi Kleen Tested-by: Arnaldo Carvalho de Melo Cc: Jiri Olsa Link: http://lkml.kernel.org/r/20170128020345.19007-6-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo

perf list: Support long jevents descriptions

2016-10-04T00:35:47Z

Previously we were dropping the useful longer descriptions that some events have in the event list completely. This patch makes them appear with perf list. Old perf list: baclears: baclears.all [Counts the number of baclears] vs new: perf list -v: ... baclears: baclears.all [The BACLEARS event counts the number of times the front end is resteered, mainly when the Branch Prediction Unit cannot provide a correct prediction and this is corrected by the Branch Address Calculator at the front end. The BACLEARS.ANY event counts the number of baclears for any type of branch] Signed-off-by: Andi Kleen Signed-off-by: Sukadev Bhattiprolu Acked-by: Ingo Molnar Acked-by: Jiri Olsa Cc: Madhavan Srinivasan Cc: Peter Zijlstra Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/1473978296-20712-13-git-send-email-sukadev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo

perf list: Add a --no-desc flag

2016-10-04T00:35:45Z

Add a --no-desc flag to 'perf list' to not print the event descriptions that were earlier added for JSON events. This may be useful to get a less crowded listing. It's still default to print descriptions as that is the more useful default for most users. Signed-off-by: Andi Kleen Signed-off-by: Sukadev Bhattiprolu Acked-by: Ingo Molnar Acked-by: Jiri Olsa Tested-by: Arnaldo Carvalho de Melo Cc: linuxppc-dev@lists.ozlabs.org Cc: Madhavan Srinivasan Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1473978296-20712-9-git-send-email-sukadev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo

perf list: Show SDT and pre-cached events

2016-07-14T02:09:07Z

Show SDT and pre-cached events by perf-list with "sdt". This also shows the binary and build-id where the events are placed only when there are same name events on different binaries. e.g.: # perf list sdt List of pre-defined events (to be used in -e): sdt_libc:lll_futex_wake [SDT event] sdt_libc:lll_lock_wait_private [SDT event] sdt_libc:longjmp [SDT event] sdt_libc:longjmp_target [SDT event] ... sdt_libstdcxx:rethrow@/usr/bin/gcc(0cc207fc4b27) [SDT event] sdt_libstdcxx:rethrow@/usr/lib64/libstdc++.so.6.0.20(91c7a88fdf49) sdt_libstdcxx:throw@/usr/bin/gcc(0cc207fc4b27) [SDT event] sdt_libstdcxx:throw@/usr/lib64/libstdc++.so.6.0.20(91c7a88fdf49) The binary path and build-id are shown in below format; :@() Signed-off-by: Masami Hiramatsu Signed-off-by: Masami Hiramatsu Tested-by: Arnaldo Carvalho de Melo Cc: Ananth N Mavinakayanahalli Cc: Brendan Gregg Cc: Hemant Kumar Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/20160624090646.25421.44225.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo

perf subcmd: Create subcmd library

2015-12-17T17:27:14Z

Move the subcommand-related files from perf to a new library named libsubcmd.a. Since we're moving files anyway, go ahead and rename 'exec_cmd.*' to 'exec-cmd.*' to be consistent with the naming of all the other files. Signed-off-by: Josh Poimboeuf Cc: Jiri Olsa Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/c0a838d4c878ab17fee50998811612b2281355c1.1450193761.git.jpoimboe@redhat.com Signed-off-by: Arnaldo Carvalho de Melo