kernel/tools/perf/builtin-kvm.c, branch linux-4.17.y

perf mmap: Simplify perf_mmap__read_init()

2018-03-08T13:05:53Z

It isn't necessary to pass the 'start', 'end' and 'overwrite' arguments to perf_mmap__read_init(). The data is stored in the struct perf_mmap. Discard the parameters. Signed-off-by: Kan Liang Suggested-by: Arnaldo Carvalho de Melo Acked-by: Jiri Olsa Cc: Andi Kleen Cc: Namhyung Kim Cc: Wang Nan Link: http://lkml.kernel.org/r/1520350567-80082-8-git-send-email-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo

perf mmap: Simplify perf_mmap__read_event()

2018-03-08T13:05:53Z

It isn't necessary to pass the 'overwrite', 'start' and 'end' argument to perf_mmap__read_event(). Discard them. Signed-off-by: Kan Liang Suggested-by: Arnaldo Carvalho de Melo Acked-by: Jiri Olsa Cc: Andi Kleen Cc: Namhyung Kim Cc: Wang Nan Link: http://lkml.kernel.org/r/1520350567-80082-7-git-send-email-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo

perf mmap: Simplify perf_mmap__consume()

2018-03-08T13:05:52Z

It isn't necessary to pass the 'overwrite' argument to perf_mmap__consume(). Discard it. Signed-off-by: Kan Liang Suggested-by: Arnaldo Carvalho de Melo Acked-by: Jiri Olsa Cc: Andi Kleen Cc: Namhyung Kim Cc: Wang Nan Link: http://lkml.kernel.org/r/1520350567-80082-6-git-send-email-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo

perf kvm: Switch to new perf_mmap__read_event() interface

2018-03-05T13:41:36Z

The perf kvm still use the legacy interface. Switch to the new perf_mmap__read_event() interface for perf kvm. No functional change. Committer notes: Tested before and after running: # perf kvm stat record On a machine with a kvm guest, then used: # perf kvm stat report Before/after results match and look like: # perf kvm stat record -a sleep 5 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 2.132 MB perf.data.guest (1828 samples) ] # perf kvm stat report Analyze events for all VMs, all VCPUs: VM-EXIT Samples Samples% Time% Min Time Max Time Avg time IO_INSTRUCTION 258 40.06% 0.08% 3.51us 122.54us 14.87us (+- 6.76%) MSR_WRITE 178 27.64% 0.01% 0.47us 6.34us 2.18us (+- 4.80%) EPT_MISCONFIG 148 22.98% 0.03% 3.76us 65.60us 11.22us (+- 8.14%) HLT 47 7.30% 99.88% 181.69us 249988.06us 102061.36us (+-13.49%) PAUSE_INSTRUCTION 5 0.78% 0.00% 0.38us 0.79us 0.47us (+-17.05%) MSR_READ 4 0.62% 0.00% 1.14us 3.33us 2.67us (+-19.35%) EXTERNAL_INTERRUPT 2 0.31% 0.00% 2.15us 2.17us 2.16us (+- 0.30%) PENDING_INTERRUPT 1 0.16% 0.00% 2.56us 2.56us 2.56us (+- 0.00%) PREEMPTION_TIMER 1 0.16% 0.00% 3.21us 3.21us 3.21us (+- 0.00%) Total Samples:644, Total events handled time:4802790.72us. # Signed-off-by: Kan Liang Tested-by: Arnaldo Carvalho de Melo Cc: Andi Kleen Cc: Jiri Olsa Cc: Namhyung Kim Cc: Wang Nan Link: http://lkml.kernel.org/r/1519945751-37786-1-git-send-email-kan.liang@linux.intel.com [ Changed bool parameters from 0 to 'false', as per Jiri comment ] Signed-off-by: Arnaldo Carvalho de Melo

perf evlist: Remove fcntl.h from evlist.h

2018-01-25T09:37:30Z

Not needed there, fixup the places where it is needed and was getting only by luck via evlist.h. Cc: Adrian Hunter Cc: David Ahern Cc: Jiri Olsa Cc: Namhyung Kim Cc: Wang Nan Link: https://lkml.kernel.org/n/tip-yxjpetn64z8vjuguu84gr6x6@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf evlist: Remove 'overwrite' parameter from perf_evlist__mmap

2017-12-05T18:43:53Z

Now all perf_evlist__mmap's users doesn't set 'overwrite'. Remove it from arguments list. Signed-off-by: Wang Nan Acked-by: Namhyung Kim Cc: Jiri Olsa Cc: Kan Liang Link: http://lkml.kernel.org/r/20171203020044.81680-2-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo

perf tools: Optimize sample parsing for ordered events

2017-11-17T15:16:04Z

Currently when using ordered events we parse the sample twice (the perf_evlist__parse_sample function). Once before we queue the sample for sorting: perf_session__process_event perf_evlist__parse_sample(sample) perf_session__queue_event(sample.time) And then when we deliver the sorted sample: ordered_events__deliver_event perf_evlist__parse_sample perf_session__deliver_event We can skip the initial full sample parsing by using perf_evlist__parse_sample_timestamp function, which got introduced earlier. The new path looks like: perf_session__process_event perf_evlist__parse_sample_timestamp perf_session__queue_event ordered_events__deliver_event perf_session__deliver_event perf_evlist__parse_sample It saves some instructions and is slightly faster: Before: Performance counter stats for './perf.old report --stdio' (5 runs): 64,396,007,225 cycles:u ( +- 0.97% ) 105,882,112,735 instructions:u # 1.64 insn per cycle ( +- 0.00% ) 21.618103465 seconds time elapsed ( +- 1.12% ) After: Performance counter stats for './perf report --stdio' (5 runs): 60,567,807,182 cycles:u ( +- 0.40% ) 104,853,333,514 instructions:u # 1.73 insn per cycle ( +- 0.00% ) 20.168895243 seconds time elapsed ( +- 0.32% ) Signed-off-by: Jiri Olsa Cc: Adrian Hunter Cc: David Ahern Cc: Jiri Olsa Cc: Namhyung Kim Cc: Wang Nan Link: http://lkml.kernel.org/n/tip-cjp2tuk0qkjs9dxzlpmm34ua@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf ordered_events: Pass timestamp arg in perf_session__queue_event

2017-11-17T15:14:09Z

There's no need to pass whole sample data, because it's only timestamp that is used. Signed-off-by: Jiri Olsa Cc: Adrian Hunter Cc: David Ahern Cc: Jiri Olsa Cc: Namhyung Kim Cc: Wang Nan Link: http://lkml.kernel.org/n/tip-xd1hpoze3kgb1rb639o3vehb@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo

Merge branch 'linus' into perf/core, to fix conflicts

2017-11-07T09:30:18Z

Conflicts: tools/perf/arch/arm/annotate/instructions.c tools/perf/arch/arm64/annotate/instructions.c tools/perf/arch/powerpc/annotate/instructions.c tools/perf/arch/s390/annotate/instructions.c tools/perf/arch/x86/tests/intel-cqm.c tools/perf/ui/tui/progress.c tools/perf/util/zlib.c Signed-off-by: Ingo Molnar

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman