kernel/tools/perf/arch/arm/util, branch linux-4.17.y

coresight: Move to SPDX identifier

2018-04-19T15:29:41Z

Move CoreSight headers to the SPDX identifier. Signed-off-by: Mathieu Poirier Cc: Alexander Shishkin Cc: Greg Kroah-Hartman Cc: Jiri Olsa Cc: Namhyung Kim Cc: Peter Zijlstra Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1524089118-27595-1-git-send-email-mathieu.poirier@linaro.org Signed-off-by: Arnaldo Carvalho de Melo

perf cs-etm: Properly deal with cpu maps

2018-02-16T17:55:41Z

This patch allows the CoreSight AUX info section to fit topologies where only a subset of all available CPUs are present, avoiding at the same time accessing the ETM configuration areas of CPUs that have been offlined. Signed-off-by: Mathieu Poirier Cc: Alexander Shishkin Cc: Jiri Olsa Cc: Namhyung Kim Cc: Peter Zijlstra Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1518478737-24649-1-git-send-email-mathieu.poirier@linaro.org Signed-off-by: Arnaldo Carvalho de Melo

perf auxtrace arm: Fixing uninitialised variable

2018-02-16T17:55:40Z

When working natively on arm64 the compiler gets pesky and complains that variable 'i' is uninitialised, something that breaks the compilation. Here no further checks are needed since variable 'found_spe' can only be true if variable 'i' has been initialised as part of the for loop. Signed-off-by: Mathieu Poirier Cc: Alexander Shishkin Cc: Jin Yao Cc: Namhyung Kim Cc: Peter Zijlstra Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1518467557-18505-4-git-send-email-mathieu.poirier@linaro.org Signed-off-by: Arnaldo Carvalho de Melo

perf tools: Add ARM Statistical Profiling Extensions (SPE) support

2018-01-17T13:23:31Z

'perf record' and 'perf report --dump-raw-trace' supported in this release. Example usage: # perf record -e arm_spe/ts_enable=1,pa_enable=1/ dd if=/dev/zero of=/dev/null count=10000 # perf report --dump-raw-trace Note that the perf.data file is portable, so the report can be run on another architecture host if necessary. Output will contain raw SPE data and its textual representation, such as: 0x5c8 [0x30]: PERF_RECORD_AUXTRACE size: 0x200000 offset: 0 ref: 0x1891ad0e idx: 1 tid: 2227 cpu: 1 . . ... ARM SPE data: size 2097152 bytes . 00000000: 49 00 LD . 00000002: b2 c0 3b 29 0f 00 00 ff ff VA 0xffff00000f293bc0 . 0000000b: b3 c0 eb 24 fb 00 00 00 80 PA 0xfb24ebc0 ns=1 . 00000014: 9a 00 00 LAT 0 XLAT . 00000017: 42 16 EV RETIRED L1D-ACCESS TLB-ACCESS . 00000019: b0 00 c4 15 08 00 00 ff ff PC 0xff00000815c400 el3 ns=1 . 00000022: 98 00 00 LAT 0 TOT . 00000025: 71 36 6c 21 2c 09 00 00 00 TS 39395093558 . 0000002e: 49 00 LD . 00000030: b2 80 3c 29 0f 00 00 ff ff VA 0xffff00000f293c80 . 00000039: b3 80 ec 24 fb 00 00 00 80 PA 0xfb24ec80 ns=1 . 00000042: 9a 00 00 LAT 0 XLAT . 00000045: 42 16 EV RETIRED L1D-ACCESS TLB-ACCESS . 00000047: b0 f4 11 16 08 00 00 ff ff PC 0xff0000081611f4 el3 ns=1 . 00000050: 98 00 00 LAT 0 TOT . 00000053: 71 36 6c 21 2c 09 00 00 00 TS 39395093558 . 0000005c: 48 00 INSN-OTHER . 0000005e: 42 02 EV RETIRED . 00000060: b0 2c ef 7f 08 00 00 ff ff PC 0xff0000087fef2c el3 ns=1 . 00000069: 98 00 00 LAT 0 TOT . 0000006c: 71 d1 6f 21 2c 09 00 00 00 TS 39395094481 ... Other release notes: - applies to acme's perf/{core,urgent} branches, likely elsewhere - Report is self-contained within the tool. Record requires enabling the kernel SPE driver by setting CONFIG_ARM_SPE_PMU. - The intel-bts implementation was used as a starting point; its min/default/max buffer sizes and power of 2 pages granularity need to be revisited for ARM SPE - Recording across multiple SPE clusters/domains not supported - Snapshot support (record -S), and conversion to native perf events (e.g., via 'perf inject --itrace'), are also not supported - Technically both cs-etm and spe can be used simultaneously, however disabled for simplicity in this release Signed-off-by: Kim Phillips Reviewed-by: Dongjiu Geng Acked-by: Adrian Hunter Cc: Alexander Shishkin Cc: Andi Kleen Cc: Jiri Olsa Cc: linux-arm-kernel@lists.infradead.org Cc: Marc Zyngier Cc: Mark Rutland Cc: Mathieu Poirier Cc: Pawel Moll Cc: Peter Zijlstra Cc: Rob Herring Cc: Suzuki Poulouse Cc: Thomas Gleixner Cc: Wang Nan Cc: Will Deacon Link: http://lkml.kernel.org/r/20180114132850.0b127434b704a26bad13268f@arm.com Signed-off-by: Arnaldo Carvalho de Melo

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

perf: cs-etm: Fix ETMv4 CONFIGR entry in perf.data file

2017-08-28T15:35:43Z

The value passed into the perf.data file for the CONFIGR register in ETMv4 was incorrectly being set to the command line options/ETMv3 value. Adds bit definitions and function to remap this value to the correct ETMv4 CONFIGR bit values for all selected options. Signed-off-by: Mike Leach Signed-off-by: Greg Kroah-Hartman

perf coresight: Remove superfluous check before use

2017-06-19T18:27:08Z

The cs_etm_evsel variable is guaranteed to be set at this point in cs_etm_recording_options(). Signed-off-by: Kim Phillips Acked-by: Mathieu Poirier Cc: Alexander Shishkin Cc: Peter Zijlstra Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/20170615125521.80cc128dc856bc1f2e61b730@arm.com Signed-off-by: Arnaldo Carvalho de Melo

tools: Adopt __printf from kernel sources

2017-06-19T18:25:26Z

To have a more compact way to ask the compiler to perform printf like vargargs validation. v2: Fixed up build on arm, squashing a patch by Kim Phillips, thanks! Cc: Adrian Hunter Cc: Alexander Shishkin Cc: David Ahern Cc: Jiri Olsa Cc: Kim Phillips Cc: Mathieu Poirier Cc: Namhyung Kim Cc: Wang Nan Link: http://lkml.kernel.org/n/tip-dopkqmmuqs04cxzql0024nnu@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf tools: Use just forward declarations for struct thread where possible

2017-04-24T16:43:35Z

Removing various instances of unnecessary includes, reducing the maze of header dependencies. Link: http://lkml.kernel.org/n/tip-hwu6eyuok9pc57alookyzmsf@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf tools: Remove string.h, unistd.h and sys/stat.h from util.h

2017-04-24T16:43:33Z

Not needed in this header, added to the places that need FILE, putchar(), access() and a few other prototypes. Link: http://lkml.kernel.org/n/tip-xxtdsl6nsna82j7puwbdjqhs@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo